Hey everyone,
I'm having a problem with my Jasjar. When I connect it via the USB cable to my computer, the ActiveSync Internet Pass-Through doesn't connect. So when it tries to sync with my exchange server it fails.
It is however able to connect and sync with the host computer. I have checked my computer out, and everything seems to be working there. The only thing I can think of is that there is a problem with how the GPRS connection is setup compared to the USB connection? I'm stumped at this point anything would be helpful
Here is a screenshot of what I am getting when I try to sync:
Thanks in advance!
Nathan
Related
Hi,
I understand that you can sync XDAIIs with outlook on my laptop connected to a server through some software, any ideas please.
Many thanks
Hi,
I'm not 100% sure on what you mean. If you can "physically" connect your IIs to the laptop (WiFi or USB or even BT) then you can simply use the normal ActiveSync route, install ActiveSync 3.8 and just link the two together.
Otherwise you can instead have ActiveSync (on the device itself) running in Exchange server mode and it'll ActiveSync straight with the server IF you have an Exchange server. I use this method myself and it works perfectly even over a GPRS connection.
Hope that was of some help. Sorry if I missed your point.
can u go on the internet using active sync connection if so how?
abz_y2k said:
can u go on the internet using active sync connection if so how?
Click to expand...
Click to collapse
just connect to AS 4 and use it (of couse your PC must have internet connection)
I'm using ActiveSync 4.1, WIFI to connect my PC to the internet and an USB port to synchronize my Pocket (SPV M3000 /Qtek 9100)
When my Pocket PC is connected to the PC, this "lock" the WIFI acces to the Internet. After synchronisation, it's necessary to reboot my computer to be ale to use the WIFI acces to internet.
Do you have an idea to correct this problem (this never happens before with ActiveSync 3.8) ?
Thanks in advance.
Thank God for that I'm having the same problem when i connect my wizard to my PC for active Sync my wifi in fact my internet connection locks up. When i look in network connections on my PC I have another Local Area Connection 3 ??????
But my web is locked ????
As soon as i disconect my wizard i loose the LAC3 but have to reboot my PC to get web acess again???
Anyone got any ideas???
I dont have wifi acces at home but when i connect to the pc which is connected to adsl, the wizard is also connected to the lan as i am able to surf the internet. It seems perhaps you have established another connection via your pc? my wifi is disconnected btw.
WiFi Active Sync 4.1 O2 XDA Mini s
I have the same problem. After a tip from someone on the MS Active sync forum who said it may be something to do with security I have worked out the following.
1) All computers loose all netork connections if they are connected to the router wirelessly and I try to Activesync.
2) If the Activesunc computer is connected to the router via CAT5 and I Active Sync then all is ok.
3) If I disable wireless security both WEP and WPA I can Activesync with my laptop connected wirelessly via to the router without loosing my network connections.
4) Something strange is happening still: When the PDA is connected to Activesync both computers keep popping up the UPNP icon telling me new network device found, even though its been connected for some time.
5) I have tested with WPA security, I will test with WEP next to see if it still has the same problem.
All computers loose all netork connections if they are connected to the router wirelessly and I try to ActiveSync.
Click to expand...
Click to collapse
I hit this issue with my home LAN when syncing via cable - all wireless clients dropped their connections and I got an earful from the lodger :roll:
I found that this doesn't occur when syncing via Bluetooth.
Mmm, thanks for the info - I spent hours trying to get this running yesterday and hitting the same problems - I actually cocked up my entire network and had to reboot everything! Will try bluetooth later...
Martin
Hi everyone,
When I sync my 8125 phone's email (corporate exchange server) it syncs fine when not connected to the usb cable, meaning wirelessly over the air OTA through the Cingular GPRS network.
When I connect it to the usb cable, it tries to sync, then a window pops up on the phone saying "Cannot connect with current connection settings, tap here to change your settings"
I'm not sure anything has really changed. I then upgraded to active sync 4.5 but message still pops up on the phone & I get an active sync error saying it couldnt connect to the server.
it used to sync fine through my pc when plugged in, now all of a sudden i get this message.
Any ideas?
Thanks a ton!
You must have installed a personal firewall or something.
That happened to me as well ( or you upgraded Activesync beyond 4.0, that's when AS is regarding your USB connection to be an ethernet port with IP on it.
Topic
i tried searching, but i get too much junk in the search.
when i connect using wifi, my connection keeps getting dropped, so is there a way to do it with USB?
thanks
Yes, AS by default shares the Internet connection of the desktop.
but its not working for me, i can't connect to aim with it or use PIE.
thanks
probably have to turn your proxy setting off.
how do i turn off proxy?
everytime i plug into active sync my phone gets an error like, ip address no defined or something.
thanks
I have the same problem is there a solution?
Please help?
Any fix for USB internet connection failure?
nicosomers said:
I have the same problem is there a solution?
Please help?
Click to expand...
Click to collapse
I think it is quite a common problem, come on guys can we get a fix for this?
Some of my data for you to consider:
Desktop PC connected directly to a router, Wizard, Prophet & Blue Angel all connect to internet via usb.
Laptop wirelessly connected to the same router none of the PDA's connect.
Laptop connected wirelessly to a different router (at work) again none of the PDA's connect.
Is it something to do with a wireless protocol?
Laptop and Desktop have slighlty different frewall software but I think I disabled it all on the laptop & still no joy.
Anyone able to use USB and wireless connection to connect to the internet?
I did see a registry hack offered by Dell, it relates to 'LS???' or something, tried it, no joy.
Any suggestions?
Try bluetooth ActiveSync instead of USB
Not really a fix for the USB problem but I can now do ActiveSync and browse the net together.
I have had a bluetooth dongle for the laptop for 'years' but never used it with the PDA. After some trial & error (about 45 minutes, not bad for me) I can now do ActiveSync with Bluetooth AND have access to the net THROUGH the laptop.
Speed is not as good as WiFi but it does work.
I read a tutorial some months ago on MoDaCo about setting up AS with BT. Suggest a search if you can't set it up by trial & error.
Hello,
When I connect my P3450 to the PC with USB cable, I always have Internet Connection Sharing Menu, and I cannot connect to active SYNC.
I have trye Connection -> USB to PC -> Active Sync Connection
but always the same.
Can somebody help me ???
All Thanks
Nicolas
Are you able to provide more info?
Windows ?
Service pack?
Do you experience this problem before?
Or is this your first time testing this out?
Needs problem
I always have the problem since I have connect to internet connect sharing (connect to the internet) with my HTC
I cannot change and not connect to active sync
Please help Me
There is a rise of connection port issues recently.