Database Users

Is there a way to override a rom file?

Is there a way to override a rom file?
I found welcomehead.192.png the windows boot screen, not the initial imate one, the blue windows one, ive edited the png, but cant replace the file as it is in rom, any suggestions as how to do this? or is it wait until someone works out how to open the nbf file and then change that way?
Theres nothing in the registry that i can find that points to this file

anyone?

just overwrite the file with the same name. ignore errors

1. As sama says, just use a proper file explorer (Resco/Total) to overwrite the ROM file. If you delete the new file the old one will still be there in ROM.
2. The ROMs can be decoded, you can change the ROM then flash it. This is not a safe thing to do, and is complicated. However, this is a total waste of time (hours) for a 100KB image file unless you really can't afford 100KB in your Programs Memory.
3. If you want, you can also change the "initial imate one" too. Buzz has the tools and instructions on his site (http://buzzdev.net). This will be a flash job, but takes up no space and a hard reset won't wipe it.
Hope this helps.

successfully change your wm5 splash

Ok all thought id make this into a post all together. I have been reading through lots of forums looks like we can change our boot splash easily but no one has put a tutorial on how to change the windows mobile splash. Ive wanted this as well as some others that ive read well here it is.
Step 1. find an image you want any size
Step 2. convert it to 240x320 ( if you dont it will be cut to 240x320 and you wont see the whole image)
Step 3. connect your wizard through activesync and navigate to your /windows dir
Step 4. open your image in mspaint and save as png with the filename "welcomehead.96.png"
Step 5. copy that image you just renamed to your windows dir on your wizard and its gonna ask you to overwrite and click yes
Step 6. now soft reset and your image should be there.
its easy as that . Have fun

Works only with total commander !

alex16s said:
Works only with total commander !
Click to expand...
Click to collapse
I've just done it thru "My Computer" on my PC after connecting for ActiveSync, just as gizm0 described.
I'm pretty sure that if I had copied welcomehead.96.png to somewhere else on my PDA (eg storage card) and then used either File Explorer or Resco Explorer to overwrite the one in \windows that it would have worked.
Anyway, thanks for the info gizm0

welcomehead.96.png seems to be read-only and when i try to uncheck the read only property, it does not save the changes and stays read-only so i cant delete it neither from the phone nor activesync

ok, was able to c/p it to /windows on the wizard directly. issue resolved.

It's that i say. On the wizard directly, it does not work with file explorer...
Excuse my english.

ok fyi i dont use the original file explorer i used resco file explorer and the attributes set to that file is . hidden, system, read only
and in resco you are able to uncheck those and overwrite

That's not your splash screen. That's your windows logo. Your splash screen(s) (there are 2 in some roms) is the first image you see when you turn your device on (soft reset)
http://forum.xda-developers.com/viewtopic.php?t=52564&start=50
^and there is a tutorial on that page on how to change it.
Later; Lew

ok well i know there was quite a bit of people wanting to change that and thx to lewcamino for the boot splash screen changes it works very well

I'm not sure about you guys, but it seems that I tend to be shown the WM5 splash/logo screen more than the ROM (very first one) splash screen.

Jade Phone Dial Pad

I find that the original phone dial pad is rather dull, so I modified it (see attached) and would like to share with other users. If you like the new dial pad do the followings for installation.
How to install?
A) Find the 5 files below in \windows directory and copy to a another directory (just in case) using Total Commander (or others)
a) Assets_Dialer_Normal.bmp
b) Assets_Dialer_pressed.bmp
c) Dialer_Bkgnd_Port.bmp
d) Dialer_back_key_press.bmp
e) Dialer_back_key_normal.bmp
1) Unzip the attached file -> gives you 5 files as above
2) Ensure that the 5 files is a system file (attributes system - checked)
3) Copy the 5 files above into your \windows directory
4) Soft rest
*** In case it does not work in your set (very unlikely), just copy the original files in step A) above to \windows directory.

this is a great mod - but, the bmp files are set in rom according to the file properties when viewed in total comander. So i cant rename or delete them nor can i overwrite them with your new files. I have jade 110 with hard spl rom flashed with HTC oem rom.
any ideas how to overcome this or am i doing something wrong
TIA

ukmapleleaf said:
this is a great mod - but, the bmp files are set in rom according to the file properties when viewed in total comander. So i cant rename or delete them nor can i overwrite them with your new files. I have jade 110 with hard spl rom flashed with HTC oem rom.
any idea how to overcome this or am i doing something wrong
TIA
Click to expand...
Click to collapse
I am not sure why. I've copied the files to a few different sets (stock rom, though) and they work fine. The files are not in rom. It could be due to your rom.

however, if want to change back to the original keypad how ah?

xtremez said:
however, if want to change back to the original keypad how ah?
Click to expand...
Click to collapse
As far as I understand it you have to copy back your saved original files.
By the way: I can not find these files on my Jade (with TotalCommander).

Owh..ic ic...thanks for clearing that up. Does anyone has those files? Just wanna keep incase.

I changed to a new skin, and the original one kinda looks better with the skin. But i think i accidentally replaced them. Can someone assist me please?

xtremez said:
I changed to a new skin, and the original one kinda looks better with the skin. But i think i accidentally replaced them. Can someone assist me please?
Click to expand...
Click to collapse
I'll post the original files later.. on the move right now. the files are in my notebook at home.

Thanks dude ...PM when u do so then..

Just alittle note about the condition in my Touch3G, i tried installing a various Iphone dialpads...and the software can't be removed even though i deleted it in the registry, plus when i don't use the default windows dialpad..all i get is a white screen with blank [email protected]@ (freaking me out)

replacing Bootscreen?!

Hey there. i downloaded a cab which makes me see the bootscreen (SE logo) an the animation (xperia) in my windows folder. i want to change the bootscreen, but i have no rights to delete and write in the windows folder.
so how to change the original screen with my new screen?

GearX said:
Hey there. i downloaded a cab which makes me see the bootscreen (SE logo) an the animation (xperia) in my windows folder. i want to change the bootscreen, but i have no rights to delete and write in the windows folder.
so how to change the original screen with my new screen?
Click to expand...
Click to collapse
Use File explorer extension, total ommander or resco explorer
1- rename the original file to BAK or whatever you remember
2-copy the new file into \windows\
There are 3 bootsreens
SEMC***.GIF isthe startup animation
welcomehead.192.png is the green Windows screen
As an explmple, I copied I my own welcomehead.192.NEW.png to \windows\ renamed the original file to welcomehead.192.BAK.png and then renamed welcomehead.192.NEW.png to welcomehead.192.png
Reset and changes wll apply

Thanx for your answer. i got the SEMC2904.bmp changed with the one i drawed. i hang it on my post if somebody wants it too.
*EDIT* okay i overwrote the old image but my new one does not appear ?!

GearX said:
Thanx for your answer. i got the SEMC2904.bmp changed with the one i drawed. i hang it on my post if somebody wants it too.
Click to expand...
Click to collapse
A thumbnail would be fine
You can upload a thumb to tinypic.com or else
Thanks for sharing

Here's the Thumbnail.
But do you have a tip for me? i copied the screen to my windows folder. i'm getting asked if i want to overwrite it. i agree, but if i reboot my x1 i don't see my new screen

Check
It appears that (like desktop Windows) the Xperia performs a check on boot of the file details. If the file is deemed "corrupted" it is replaced by the original from an unknown location.
Since you file quite likely does not match a hash check, or possibly is saved in the wrong format, it gets replaced.
I had this problem and as of yet have been unable to make an image that the device will accept.

yeah must be some kind like this but i want to have my own startupscreen!!

Change start text on swedish ROM?

I have tried to change my start text to something else but I really can't find that string 321 in ANY .dll on my device. I don't even have a shellres.dll.0409.mui as it says below.
Change Start Text
1. Unsign your shellres.dll.0409.mui
2. Open it in one of these three Reshack / PE Explorer / Restoratorand go to string value 321 and change the name from Start to whatever you want.
3. Save your modified file
4. Open MssignerorMultiple file Signer
· click Start sign Process (for MFS follow directions in the link)
· a window will pop-up with "Process finished!"
· You will see a that a text file has been create for your shellres on your desktop
· Open the text file, if you see "Warning: This file is signed, but not timestamped, Succeeded" you know the file was signed.
5. Transfer the modified file to your SD card
6. Open TC and navigate to the /Windows and rename your old file to "shellres.dll.0409.mui.bak"
7. Move your modified file from your SD card into the /Windows
8. Soft Reset
Can someone help me out please? The people at PPCGeeks are so slow

No one?

No because 0409 is for English rom
In Sweden the value is 041D
So find the file shellres.dll.041D.mui

Ye I have that file, but it seems I can't copy it to my internal storage with Total Commander for some reason. Well I can copy it, but the file seems hidden and stuff even if I take away those properties on the file before I copy it.

Try to modify this file taken from windows mobile 6.1 version 2.03 SVE
then you can make a cab file that overwrite the orignal file in the windows folder

Will it make any difference when I have 1.93 ROM? I'm too lazy to upgrade to 2.03 since it most likely won't make any difference (I checked the changelog for 2.03).

2.03 is much faster then the 1.93

And also more battery consuming I read, true?

ArtieQ said:
And also more battery consuming I read, true?
Click to expand...
Click to collapse
I don't think so, I'm using 2.03 standard rom and I don't see any difference.
Different versions of the radio can consume more or less battery and also
influence the function of the GPS.
There's a specific thread for radios.

I'll update later today then when I've charged the phone :]