S.O.S.: Jam + internet + desktop... - JAM, MDA Compact, S100 General

Hi guys!
Is it possible to surf the web with my Jam using the internet connection of my desktop pc (in office with lan connection and in house with dial-up!)?

Yes it is, you need to setup activesync over bluetooth however or activesync over Wifi with an add-in card.
There are a lot of guides around on how to do it with bluetooth!

Well!
With only the USB cable is not possible?

Yes it's possible with AS via USB. I've been doing it a long time ago. I don't really surf but I use it to update currency and weather in WorldMate Pro.

zerimar, can you explain me how can I do it please?

There's nothing special. As long as there's a working USB connection between the PPC and AS, open your browser and type in the url.

... not quite yet!
You have to go to connection settings within AS and set "this computer is connected with" to "internet"
then you can surf with your mdac via usb

thormdac said:
... not quite yet!
You have to go to connection settings within AS and set "this computer is connected with" to "internet"
then you can surf with your mdac via usb
Click to expand...
Click to collapse
I don't see what you mean coz I didn't need to do anything in AS Connection Settings.

Hello,
I dont think you need any extra settings to be done. Just have your PC connected to the net and Synchronize your device with active sync and open Pocket ie...Thats it i do!
Regards
Carty..

I know what he means cause i got the same problem, one of my 2 pc connections (one work one home) the work one has a corp lan proxy. ive got only one application that can connect thru the firewall which is Egress RSS reader.
is there anyway to give the proxy link plus username and password like you can in egress to the connection details on the phone or within activesync somewhere?
ive seen on other forums people asking the same thing.

Related

ActiveSync Over WIFI

ActiveSync Over WIFI - does anyone know if this is possible.
I use WIFI at home on my XDAII for the internet, but would like to Sync it with my laptop without having to drag the cable home (or buy another usb cable)
Any ideas ?
Cheers
Yes, sure you could do it! Just make sure ActiveSync Connection settings on your desktop PC include Ethernet (right click on ActiveSync icon on the taskbar, choose Connection Settings and click on Allow network). Then, run ActiveSync on XDA-II and choose same 'synchronise via Network' setting - there is one on the 'Advanced' tab I think (can't say exactly, as my wife plays Lines on it right now ) - just type in your PC NETBIOS name (I guess it will be there already if you connected via USB before). I've tried it and it worked straight away (although takes few secs more to connect).
fishmedia said:
ActiveSync Over WIFI - does anyone know if this is possible.
I use WIFI at home on my XDAII for the internet, but would like to Sync it with my laptop without having to drag the cable home (or buy another usb cable)
Any ideas ?
Cheers
Click to expand...
Click to collapse
YOU BEUT ! I'D KISS YOU ... if
1. you were female
2. you were good looking
3. you were in close vacinity!
I had to run active sync, go to tools > Options > Server
And add "//myname" and untick SSL
However, my WIFI network card is set to MOBILE WEB GPRS (for IE and MSN, inbox etc) and it wanted WAP network GPRS so tried to dial up.
I changed the WIFI card to be WORK instead of INTERNET and it worked great.
Not sure if I have WORK and INTERNET set up correctly, it is basically how it came setup for GPRS access. But I don't mind changing it over now and then unless someone knows a better way?
(interesting that I managed to do an o2 Active update via the WIFI card! and not WAP GPRS - something I can't do while connected via USB? but can surf via USB )
Anyway... RESULT ! cheers
Well, obviously not female (while nothing is impossible in modern world - you could change sex, not only ROM version in your XDA ). As for the Wi-Fi card setup - it's quite simple, you'd better set it to 'Work' always unless you are connecting from Starbucks, and then change properties of 'work' connection, checking 'Connects to Internet' box and entering your proxy address. All these 'ISP' and 'Work' settings seemed to be pretty confusing to me first time until I understood how it works. You could not browse network through an USB cable (a mystery to me, since it's a normal PPP connection!), so Wi-Fi is probably the best option for all tasks - synchronisation, browsing etc.
Thanks for your help, I'll have a play

Connecting to internet through Active Sync

I am trying to configure my XDA2 to connect to my PC and surf the internet via a BT connection. I can Sync via BT but when I try to set up my connection it keeps asking for a phone number despite me saying it is over a Bluetooth connection and my IP is broadband. Sorry if this has been asked but I did search for any info on this.
thomo said:
I am trying to configure my XDA2 to connect to my PC and surf the internet via a BT connection. I can Sync via BT but when I try to set up my connection it keeps asking for a phone number despite me saying it is over a Bluetooth connection and my IP is broadband. Sorry if this has been asked but I did search for any info on this.
Click to expand...
Click to collapse
Why do you need to setup connection for since it's already connected with ActiveSync via BT? Basically once you get connection between your device & activeSync, that's all the step you did. Unless a firewall has stopped your device from accessing to the internet; if it's the case, create exception for your activeSync, and retry browsing with your device.
hope this helps.
regards.
thanks for yor reply, Each time I try to connect the the interneet on my device it keeps trying to connect via GPRS and not through my PC via BT....
Go to ActiveSync, open the options menu & go to Rules tab.
At the bottom, you will find Pass Through Conenction, make sure its set to The Internet and not Work
Cheeeers 8)
thats it, it finally works. Thanks very much.
Glad to hear that, thomo
You're welcome anytime, dude :wink:
activesync through bt
go to setup in bluetooth and select the activesync in bt
pair the pda or ppc
give password
in wm2005 select activesync through the bt
brouse internet
i did myself
I'm having a similar problem and have effected the setting as above, however IE on my IIs says "the page you are looking for cannot be found". My computer connects fine and I have the same issue when trying to connect the device via WiLan, although I do connect to the network.
I've been trying to fiddle with the settings for a few days now but no success...anyone out there got any ideas.
Many thanks
I have mastered it now, I sync using BT on my device, leave it connetced, close Active sync on my XDA 11, Click on IE and the device connects through my PC, super duper.........
Thanks, this is what i am looking for now. I will try it
i can now only online with cable, not through Bluetooth connection
go into the advantage settings for connections
there you should be able to change the network back to my isp insted
of my network
bluetooth-internet
Hai...iam new here..i have got O2mini and would like to connect to internet via bluetooth...
i try using usb cable and activesync program to serve internet and its working.
...i succesfully connect my pc and ppc via bluetooth by using ppc activesync but when try connet to internet its still go to gprs..
pls help me...TQ
like i said again and again in this thread it's all about which network is picked in advantage settings under network connections in systems
I also tried to make a connection to the internet with activesync and usb. But with my mda doesn't work. iexplorer says the page you are looking for cannot be found. But my ppc says "connectivity the internet Pc connection". What are the settings on your ppc, so i can check?
Somebody help me.
test with ping
and maybe messenger to see if it's a dns issue
and if people use pocketplus they prob should make sure that it's not set to close insted of minimizing otherwise the connection would most likely be closed when they close activesync
Thank you very much. You solved my problem.
ezzkht said:
Go to ActiveSync, open the options menu & go to Rules tab.
At the bottom, you will find Pass Through Conenction, make sure its set to The Internet and not Work
Cheeeers 8)
Click to expand...
Click to collapse

active sync

can u go on the internet using active sync connection if so how?
abz_y2k said:
can u go on the internet using active sync connection if so how?
Click to expand...
Click to collapse
just connect to AS 4 and use it (of couse your PC must have internet connection)
I'm using ActiveSync 4.1, WIFI to connect my PC to the internet and an USB port to synchronize my Pocket (SPV M3000 /Qtek 9100)
When my Pocket PC is connected to the PC, this "lock" the WIFI acces to the Internet. After synchronisation, it's necessary to reboot my computer to be ale to use the WIFI acces to internet.
Do you have an idea to correct this problem (this never happens before with ActiveSync 3.8) ?
Thanks in advance.
Thank God for that I'm having the same problem when i connect my wizard to my PC for active Sync my wifi in fact my internet connection locks up. When i look in network connections on my PC I have another Local Area Connection 3 ??????
But my web is locked ????
As soon as i disconect my wizard i loose the LAC3 but have to reboot my PC to get web acess again???
Anyone got any ideas???
I dont have wifi acces at home but when i connect to the pc which is connected to adsl, the wizard is also connected to the lan as i am able to surf the internet. It seems perhaps you have established another connection via your pc? my wifi is disconnected btw.
WiFi Active Sync 4.1 O2 XDA Mini s
I have the same problem. After a tip from someone on the MS Active sync forum who said it may be something to do with security I have worked out the following.
1) All computers loose all netork connections if they are connected to the router wirelessly and I try to Activesync.
2) If the Activesunc computer is connected to the router via CAT5 and I Active Sync then all is ok.
3) If I disable wireless security both WEP and WPA I can Activesync with my laptop connected wirelessly via to the router without loosing my network connections.
4) Something strange is happening still: When the PDA is connected to Activesync both computers keep popping up the UPNP icon telling me new network device found, even though its been connected for some time.
5) I have tested with WPA security, I will test with WEP next to see if it still has the same problem.
All computers loose all netork connections if they are connected to the router wirelessly and I try to ActiveSync.
Click to expand...
Click to collapse
I hit this issue with my home LAN when syncing via cable - all wireless clients dropped their connections and I got an earful from the lodger :roll:
I found that this doesn't occur when syncing via Bluetooth.
Mmm, thanks for the info - I spent hours trying to get this running yesterday and hitting the same problems - I actually cocked up my entire network and had to reboot everything! Will try bluetooth later...
Martin

Access the internet via activesync

I used to be able to access the internet on my MDA Pro when connected to my laptop via activesync.
Now I can't!!!!
Could anyone tell me how to do this & the difference between work and internet settings?
Thanks
have you selected the pass through function in activesync?
work allows the use of VPN connections as it is expected to use names for the machines you are going to connect to. thus disallowing the use of "." in addresses.
internet allows the use of ".", but connecting a VPN connection is difficult over it. in order to use "." vpn connection addresses over the internet, you have to start placing exceptions in to the connections advanced section.
you should set it to Internet to allow the internet pass through feature.
hope it helps and is clear enough. if you need further clarification let me know. i just had to setup my wifes 2 days ago, and i can back track how i did it if necessary.
another question with same content.
use PC as a bridge for MDA (connected via BT or cable)
PC connected via proxy to the i-net.
on MDA the IE works fine, Opera doesn't.
any ideas??
greets, Ben
sorry dont use opera at all.
does it work with IE?
like I said before:
IE works fine
Opera not.

Question in internet connection

Hi,
This might be a silly question, but I was just wondering if it is possible to use the internet connection on a PC if the hermes was connected to it via USB?
I dont have wifi and my PC connects directly to the internet, is there anyway the Hermes can access this connection?
J'
Right now I am using my ATT8525 as my modem.
It took me a long time to get it but I'm still not sure how I excatly what settings I did.
One thing is ""Internet Sharing"
Find that and setup for USB and then connect. Your computer might see the connection and go from there.
Wish I could help more...
It should work automatically when your Tytn is connected via ActiveSync and your desktop computer has internet. No further configuration should be necessary on default. Just open the Tytn's IE and try it out ...
Oh my bad... I got the question backwards

Categories

Resources