I have a few unusual problems - JASJAR, XDA Exec, MDA Pro General

Hello!
I've just got the MDA Pro which I've bought on an online auction. It generally works, but I have a few problems with it...
First of all, I got it with no charger apart from the USB cable... is it supposed to be like that?
Second, I didn't get any CD with drivers, and when I connect it to the computer, it asks for a driver... I tried looking for the drivers online, but I couldn't find anything. Where can I get them?
Also when I started it for the first time, I got a screen saying "Test Only, Not For Sale".... this is weird!
Another thing is a strange version number. The ROM version is ok, I think... it's 1.30.68 WWE. But the Radio version is 0.00.00 :shock: However, the phone seems to work well....
The last thing is that the MDA has a German keyboard, but an English ROM, so some of the buttons are wrong... for example, I press Fn+2, which should give me a ", but I get a @ instead. Is there some program which changes the keyboard layout in the system?
All in all, I like my new MDA, but I'd like it more if I could at least connect it to the computer, so that I can install things on it. Right now I can copy stuff to my MDA using a SD card, but I can't install programs that way

Hi Starlight, welcome to the board.
Be wary of what you buy on online auctions
1. Charger cable - it does come with a mains charger normally, but a USB lead will be fine, if slower. But you can buy one on ebay for around £4.
2. You shouldn't need the drivers that are first asked for when you plugin. Just click "no this time" or something, and it'll shut up if you have appropriate user rights on your PC.
Then, you need to go to microsoft.com and download ActiveSync. Ideally disconnect the pda first, install, and then plugin usb again, and everything should recognise itself and you'll be away.
Note - using the sd reader method is much faster in any event, for large files like films.
3. Test only sounds odd. Sounds like you're using a test rom, I've not seen it before. Is it every time you boot, or just in use itself, or just the once etc?
4. Radio 0.00.00 means the phone was once network locked, and has now got Buzz's special rom on it, used to unlock it to simunlocked. Read around on the board about this should it be necessary, but basically, find your operator and flash it ASAP with a nice official rom. 0.00.00 shouldn't do any harm, but it was only a special rom for unlocking.
5. Keyboard - I think some other guys have solutions on this on the board. Worst (or best?) case, use an essential app called PQz.
V

I can answer some of your questions:
- mine came with a charger that you can plug in the mains + the usb cable
- you don't need a driver, just download active sync 4.1 from the Microsoft site, install it, THEN plug your device in (obviously that should have come on a cd)
- regarding the rom 'test message', looks like someone sold you a prototype. I can be a good or a bad thing. Hopefully you can flash the rom and upgrade it to a 'standard' model.
Good luck!

Thanks for the answers!
Wow, a prototype... well, that explains why it was so cheap! It was cheaper than other MDA Pros, that's why I bought it.
I've downloaded ActiveSync 4.1, but it said that I need Service Pack 2, so now I'm downloading a 272 MB SP2
As for the charger, I think I'll buy something like this: http://photos.allegro.pl/photos/oryginal/10/1092/109247/10924799/109247999
It's supposed to be an universal charger for everything which can be charged by an USB cable, so I hope it will work
I'll try to look around the forums for something about the keyboard...

Sorry for the double post, just wanted to add something...
I got a CAB version of some registry editor and changed some keyboard settings, and it works well now!
The SP2 is 53% downloaded, and I have to install it before I install ActiveSync to connect the MDA to the computer...
As for the "Test Only, Not For Sale" message, it appears on the startup screen after a reset... and there's a i-mate logo under it. So I guess my MDA must have been flashed before, because there's a T-Mobile logo on it...

Thanks for the udpate. Glad to know you managed to make work ok in the end! :lol:

I still have a big problem with ActiveSync... please check my other thread here

Related

Jam not recognised by windows/activesync

Hi Guys,
New to the ppc scene, so please be gentle!
I've had a search through the forum, and can't find the answer to my problem, so please help me, if you can.
I have just been given an imate jam by my dad, his old work phone. It hasn't been used for approximately 6 months, so I had to charge the battery (and back up battery) to get it up and running.
Now I've got it charged up and switched on I've encountered a problem:
When I connect my Jam to my PC (XP Pro) it lights up the charge LED but then nothing, no installing drivers or anything. When I start activesync it doesn't see the Jam, when I go to device manager on my pc it's not there.
The Jam has also reset itself a few times, so I was thinking I should upgrade/reflash the software - but I can't do that when the PC doesn;t see the Jam.
Have I missed something, done something stupid or is the Jam knackered? Any help would me muchos appreciated
Many thanks in advance.
My device is an imate jam, details below:
ROM Version: 1.03.00 WWE
ROM Date: 11/01/04
Radio Version: 1.01.00
Protocol Version: 1337.38
Ext ROM Version: 1.03.163 WWE
Not sure if this helps anyone help me with my problem, but thought the more information the better!
Thanks in advance for you help
Check your connection settings in ActiveSync.
Ok, I've just tried the settings you suggested, though for some reason I can only select COM4?? I'm using activesync version 4.1.4841.0
When I try and connect I get the error shown in the attached image
Although some have had luck with AS4.x, others as well as myself have experienced that it doesn't work very well with the Magician. Use AS3.8 and it works flawlessly.
ok, I've changed to activesync v3.8 and still no joy - it just goes in circles looking for the device on COM4
I'm showing:
COM1 Not Installed
COM2 Not Installed
COM4 Available
Infrared Port Not Installed
USB USB is Available
This is driving me crazy!!
Normally when the magician is plugged in to the usb port, windows should recognize this and go through the usual driver installation procedure. If not disconnect the magician, switch off all settings in AS and reboot your PC. After the PC has booted and you logged-in, connect the magician to a different usb port. If the windows plug+play install routine does not appear, go to control panel and add the device manually. Once the device is added, then put back your settings in AS.
ok, 2 reboots later!!
when I connect it (on a different port) all that happens is the LED goes Orange to indicate that its charging - no drivers are installed.
When I go to Add Hardware it can't find the Jam (tried changing the port) and if I go to device manager its not there (not even with a ! Warning next to it).
I'm now trying to add it from a list, but I can't find imate or HTC in the list of manufacturers.
I'm totally stumped, this is insane!
Any more ideas?
Try hard resetting the magician then check AS settings in the magician also.
I've done a hard reset and rebooted my pc again, still nothing, even when I try and add it manually.
I've even tried connecting in bootloader mode, but that won't work either!
Could it be a hardware fault? Or more likely a software thing?
Not being recognised
Hi
I had the same problem today, it turned out to be a faulty cable(brand new spare). I used a different cable and all is good.
:wink:
I've now tried 3 different cables, 2 latops and a desktop PC and am having the same problem no matter what - I reckon my Jam's screwed up somehow!
Take a look on the connector, try to clean it(with alcohol preferably and with battery out of jam). You have to have AS installed before you connect the jam to pc for the first time, otherwise it will cause problems. Did you try BT connection to active sync? Did it work? Did your dad experience these problems too?
Ok, there's definately a problem with my device.
I can pair it up via BT and transfer files etc, but as soon as I connect with Activesync I get the same error message as I posted earlier in this thread.
I've tried cleaning the mini-usb port (battery out) with alcohol, still no joy.
Spoke to my dad, says he never used activesync, just used it as a phone and a sat nav, nothing more.........
Starting to get really wound up by this now. Unless anyone has any other ideas (dropping it from a great height??!!) I think I'm gonna have to send it to a repair centre for them to have a look at it
i had an intermittent problem like this wherw windows would say a USB device connected to the system was malfunctioning etc..
It cleared up after a while donno why... when uve connected the JAM, wiggle the connector around a bit and see if anything happens....
The message you get is not necesarilly caused by faulty device, I got that message many times before I was able to properly configure my active sync over BT.
the cable supplied with imate jam looks like a normal mini usb cable but its not.
its different then the mini usb cable. You cant use a mini usb cable (from ur camera,card reader etc.) with your imate jam.
Once I used my camera mini usb cable with imate jam and i got the same error which omhaigh is having. Netither Windows recognize my imate jam nor activesync. I plugged in my imate jam cable and it was all good again.
In short, you need cable supplied with imate jam to connect it with pc.
The Magician's USB cable is a standard one. I've been using various USB cables on my laptop. home desktop, and office PC without any problems.
yeah, it is completley standard, ive used 5 different cables and all work,
I've now tried a whole host of PC's and Laptops at work, using several mini usb cable and bluetooth (both built in and dongle on different machines) following the advice above and in the BT active sync thread.
No matter what I do (including cleaning the ports with alcohol etc) I get no joy what so ever, and always end up with the same result!!
I've read that connecting the device to a pc before installing activesync can cause problems.......I'm starting to think that perhaps my dad's done that and either can't remember or is too embarrassed to admit it! Is there a fix if this is what has happened?
I'm guessing its gonna have to go to a repair centre

Missing Installation CD-ROM and Manual

Hello all,
I have just bought the Jasjar on ebay, after months of hoping and dreaming!
The unit works fine, but the twit who sold it to me has 'lost' the original CD and manual, leaving me with no way of:
Syncing to my computer (tried it, but XP demands the install software)
Working out how to use the phone element (such as sending text messages).
Generous souls that they are at clubimate, they want to charge me $60 for this information!
I was wondering if someone might be able to send me a copy of the files / a torrent of the disk, so that i can at least install it on my home computer and read the .pdf manual.
Much appreciation in advance!
Stephen
active sync can be found on the ftp
ftp://xda:[email protected]/Universal/Tools_Programs/active_sync_4.1.zip
manuals can also be found on the ftp
ftp://xda:[email protected]/Universal/Original_German_and_Englsh_Manuals_etc/
have fun with it
Many thanks.
Is this ftp to the activesync the one that the computer will install so that it recognises the Jasjar? I downloaded activesync to my pc, but when I connected up my jasjar, my computer wouldn't recognise it, because the 'Install new hardware' utility had not completed!
Aha! The ftp part of this site appears to be the possible solution to my problems. When I connect my jasjar to the pc, which software file would I direct the 'hardware installer' to though?
Many thanks for your help so far!
there shouldnt be a ´hawdware installer´... active sync should recognise the jasjar without problems...
do u have it connected directly to the pc or to a usb-hub? try doing it directly
I was using activesync 3.8 from the windows website. Could that have an effect?
When plugged it, the bubble pops up, saying Device recognised: POCKET PC USB SYNC, and then the Hardware install dialog box comes up.
I will try with the latest version of Activesync, and see what difference it makes.
Wm5 (which is on your universal) only works with AS 4.0 or higher. Check the ftp for that or download directly from MS. I recommend AS 4.1, since it is much more stable than 4.0.
ActiveSync 4.0 doesnt work with aku2 roms if i remember correctly so try 4.1 (link can be found in my 1st post in this topic)
Okay, I downloaded and installed Activesync, and it will still not recognise my JJ, saying it cannot be found. At the same time, the computer says 'USB Device not recognised'. Argh!
Does anyone have a solution to this problem?
My XDA Exec has just been replaced by O2, but my PC reports the 'USB Device not recognised' error. I suspected the new phone but I plugged it into my laptop and that works fine.
Im pulling my hair out here, its very frustrating. I have installed 4.2, uninstalled, tried 4.1, no luck.
I tried connecting with the phone switched off, no difference. Tried after both PC and phone rebooted, no luck.
There must be something in the Windows USB settings that has gotten screwed up, but I don't know enough of that area to feel brave enough to tamper with it.
Any ideas guys?
Thanks
Nasdaq
Ah, I have a solution to my problem!
After many reinstalls of different versions, I had a brainwave, why not try syncing when no other USB devices are attached! Hey presto! It works!! :lol:
I found that my USB Skype phone was conflicting somehow, so unplugging that works fine. I'll sort the USB phone out later, being able to sync is much more important atm.
Cheers
Nasdaq

Pb with my USB cable

Hello!
I'm quite a newbie in the whole HTC world, so please answer with simple words!
Here is my problem : my HTC just wouldn't "see" my PC (neither under XP nor under Vista) when I plug the USB cable. Of course, I have already tried to reinstall ActiveSync (XP) or Sync Stuffcenter (Vista), but it doesn't work.
The battery is still charging so I assume that the cable is not broken...
Do you know if the USB cable HAS to be the HTC one? (I might currently be trying to use a Canon or Nikon one, initially designed for a digital camera...)
Any other idea?
Thanks,
Ced
on your htc try going to
1º- settings:
2º- system:
3º- then go were it say´s usb to pc
4º- there you will find a box ,if it has a check on it then uncheck it ,but if it
dont have a check on it then check it
5º- have fun with your device
In alternative....
...Make sure that activesync is talking to the USB port: On the windows PC, open activesync and look in the menu File-->Connection settings. Make sure that "Allow USB Connections" is ticked.
By the way, i don't understand why but once in a while this checkbox becomes unticked without reason....do you have the same?
Thanks for your answers, but it still isn't working...
@pzucchel : on Vista, ActiveSync does not exist I think... and on Sync Center, there is no such thing as "allow USB connections..."
@LAMM44 : the case was unchecked, so I checked it, and here, miracle, my computer shows me a window telling me that it is uninstalling something... ... ...and then... ...nothing! The PDA doesn't have a letter, this bl..dy SyncCenter does not see anything, ...
Thanks anyway, if you have any other suggestion?
Any service which might not be running and should be activated on Vista? (I don't think so, because it is not working on XP either)
Any thoughts about this USB cable thing?( Do you know if the USB cable HAS to be the HTC one? (I might currently be trying to use a Canon or Nikon one, initially designed for a digital camera...))
Ced
EDIT : the "uninstalling" thing was about Windows Mobile Device Center. When I run this program, I can see the "allow USB connections" case, which is checked... but with the case on the PDA checked or not (the one with the advanced network stuff), WM Device Center still says that the mobile device is not connected...
I can confirm you can use Any USB cable (i am presently using one from Garmin) - even through USB routers. You are right - my comment on the USB port was related to win XP. BTW, are you sure you are using an up-to-date activesync?
I have downloaded the last one on XP yesterday... But not on my computer (mine works with vista).
I can try to update Vista WM device Center... but this should have worked on XP!
Thanks for the answer about the USB cable... It seems to be a pb on my HTC then. I went through all the menus but don't see anything relevant...
...did you consider a hard reset? of course, not having activesync you cannot back up- but maybe you can use the sd card.
are you using active sync 4.5? do you have an original rom?
Yes, I wanted to do a hard reset... but not without backing up my contact and SMS!
Would you know where these are stored in the memory? (if I could just copy/paste a folder on the SD card, then I could reinstall windows mobile completely...)
I tried ActiveSync 4.5 on XP yesterday yes. I have never reinstalled WM, so I am a bit lost... What is an original ROM? If it is a DVD of WM or something, I have to search, I am not even sure I have it... I think I have the initial HTC DVD, but is there WM on it? Certainely...
BTW, would you advise me to install WM6 instead of WM5? Is it faster? And a last question : what does "ROM Tnyynt 015 (CE OS 5.2.20273 Build 20273.1.3.3) " mean? (I must admit that I don't understand I mere word of the Trinity wiki... what is a kitchen ROM for instance???)
OK, a few things to be explained!
you probably bought your trinity and it comes with an ORIGINAL rom inside it, that should be more or less working. For example, initial roms didn't even allow to use the internal GPS, that was installed but not usable because of software issues.
I don't know where you live or where you bought it, but typically your telephone company or the seller (dopod, HTC, Qtek) provide regional upgrades and improvements of the operating system (windows mobile) and of the radio rom (the one controlling WiFi, GSM, GPS, Bluetooth, etc.). Sometimes it is the case, sometimes they forget about you since you bought it and they got their money - bye bye!!!!
Then....comes XDA-Developers!
here, we generate our own operating systems and improve further the possibilities of the various systems. For example, many of us are using Windows mobile 6.0 and 6.1 on the trinity, we can switch a french telephone into an english telephone, unlock the telephone to be used in any country, etc.etc.
A telephone is much more powerful than a PC 10 years ago: in terms of processor, graphics, memory, I/O. Not a surprise that, as a PC, software can be improved. Believe me (it is at least three years i am following this): the speed, functionality and performances of the telephone can greatly improve!!! I am using the rom cooked by TNYYNT, version 15, which is based on windows mobile 6.1 and a very recent release (build) of it.
Main negative consequence of installing a cooked rom: don't expect that warranty will be valid!
Said this, a warning: you do it at your own risk. Therefore my suggestion is READ before you do things. Now your activesync problem is minor, but making the wrong upgrade could block your telephone. Nothing is "forever", but a badly stuck telephone requires good skill to recovery it.
So, step by step: is anything else working in your system? if so, i would concentrate in this active-sync problem only, for the time being.
If you would be intrigued in learning more and play with your P3600 (or P3600i, there are actually two models!) then be preparred in reading a lot on this forum! in this case, start from here:
http://wiki.xda-developers.com/index.php?pagename=HTC_Trinity
I hope i was able to make things a bit clearer for you, don't hesitate in asking more.
i see it right now: to backup your contacts and SMS, without activesync, you can do it with this program called pimbackup that is described in
http://forum.xda-developers.com/showthread.php?t=299705
you could download it directly from the telephone (or send it by email), save the installation program onto the minisd and save the contacts/sms onto the minisd card (Storage card). Then, after the hard reboot, you will have to reinstall the pimbackup and restore the contacts/sms again. is it OK?
Thanks a lot for these explanations! I will try pimbackup tonight.
Actually, I bought my HTC on ebay, and the previous owner had upgraded it to have the radio working, and had installed a lot of softwares and tweaks... But now I would like to choose my own! I understand the principle of the ROM upgrade of course, but I am just a bit lost with all the different ROMs! What is a kitchen ROM, what does "dump the ROM" mean? See, I would need a back-to-basics tutorial!
BTW, is it legal? (I mean, the packed ROMs come with Windows isn't it?) just to know!
Thanks again!
Hi, the fact that there are a lot of tweaks and radio upgrades on your HTC doesn't play much in your favour!
When you are ready, and only when you are ready, go and install Radio Rom 1.56 and the rom TNYYNT 017 (I am ASSUMING you have a P3600 and not a P3600i...right?)
http://forum.xda-developers.com/showthread.php?t=413612
somebody could disagree...but i think it is the best choice!
Concerning the legal aspects, i am not a lawyer but microsoft is well aware of the XDA-Developers site, including HTC and the involved companies. Many of us do believe they use this site for beta-testing....but again, search yourself on the site to know microsoft's opinion...
My argument: I paid for the WM license, I bought the hardware and i would like to have a nicely working system - if they are ready to support their customers they should let us know ;;;;-)
By the way - about your question on the "legality" that made me thinking about it . Read this thread and enjoy it!
http://forum.xda-developers.com/showthread.php?t=290190
Whaou, great post about the legality, thanks!
I think I have a 3600 and not a 3600i (I am a bit ashamed, but I don't know how to know this.......), but the fact that the radio wasn't activated when the previous owner bought it seems to mean it was the 3600, no?
Thanks a lot for PIMBackup, it worked perfectely, and really fast!
Now that my backup is done, I'm a bit stuck, because I still haven't solved the USB problem, and I need the connection to download the ROM...
ready for a hard-reset? settings-->Clear Storage (dont worry - it will not clear the minisd...)
just before the hard-reset : do you think my usb connection has any chance of working after that?
EDIT : hard reset done, USB working just fine!!! Thanks a lot!
Now I'm ready to spend hours trying to install install Radio Rom 1.56 and the rom TNYYNT 017.
(do I need to install TNYYNT first?)
EDIT2 : OK, I have installed TNYYNT 017, it's really simple actually, and must faster than my bugged WM5! I haven't tried the radio yet.
Thanks again!
EDIT3 : BTW, would you advise me to install Tomtom 6 or 7? Thanks again!
Answer one: of course i think you have some chance...especially now that i know it works!
Answer two: go for the radio rom...and donate to TNYYNT since he did really a great job. If you try other roms, you will notice the difference (i tried all of them, essentially). The radio rom is also very great in my opinion, and the update is easy.
Answer three: TomTom 7.4 is indeed the best (even better than IGo).
I am happy that it worked out and i was helpful.
Tomtom 7.4?
On tomtom's website, I can only see the 6th version of Tomtom Navigator (http://www.tomtom.com/products/category.php?ID=2&Language=1)
Where could I find the 7th?
Hi again!
I'm quite happy with my installation now, I tweaked a bit starting from TNYYNT 017, then Radio Rom 1.56.
In particular, I followed the instruction of http://www.milow.net/public/projects/windows-mobile-skin.html to have a nice iPhone-like skin.
Now, I would like to make a backup of these few hours!
(I'd like to make make my own ROM, is it "dump the ROM"? if yes, would you have something clearer than http://wiki.xda-developers.com/index.php?pagename=Hermes_HowtoDumpRom ?)
I still have one problem, my internet WLAN connection doesn't seem to work (right after the installation of TNYYNT and radio 1.56). My Wifi is seen, the password entered and it says "connected", but when I launch any webpage with internet explorer, it stays at the "locating" stage (first, "Connecting" is written, then "Locating", then... nothing!). Any idea please?
Thanks again for all your help!!!
EDIT : hhhoooo noooo, now I've got this blinking start menu problem!!!!! http://forum.xda-developers.com/showthread.php?t=295816
GGGRRRRRR!!!!!!!!! Well, any suggestion might help a lot!!!

USB Device not recognized

I just bought used Hima through, because I broke LCD screen on mine. And I got it with some old German ROM on it, it's working fine, but I would like something newer and in English. The thing is, that when I put phone in USB craddle, it only charges the device and says that USB Device Not Recognized. I cannot upgrade ROM nor anything else, just charge it. On my previous broken Hima, I had no such problem... Does anyone has clue what is wrong and what is the solution?
Thank you in advance...
I just found out that when I want to sync, I can do it, but have to pull cell phone toward me while it's in craddle. But doesn't work when I want to flash ROM. So I guess it's pins problem. I looked them and don't see anything bad, anyone has clue what to do?
OK, I finally managed to install ROM, I had to stick something to push forward my Hima in cradle. Does anyone know what can I do to fix that problem? It's the pins connection problem...
first of all..i don't understand why you started a new topic on this problem because THERE IS ANOTHER TOPIC WITH THIS PROBLEM JUST 3 LINES DOWN AFTER YOUR TOPIC...if you had read but didn't......about the conectivity problem with the pins cradle usb cable and advanced functionality of the usb-pc function..and thath it works just for the charge and for standard conectivity is says device mailfunction...
Because I had german windows 2003 that had no advanced functionality of the usb-pc connection! And also I didn't see too many similarities with those posts which aren't three lines down after my topic.
I changed 2 craddles and also had same problems. But I managed to access PPC when I gave some pressure on cell phone while in cradle...
I have another broken Hima (LCD screen broken), and wondered if I could take his connector?!

Latest Fast WM 6.5 ROW for Artemis (xda Orbit)

hi guys,
i have searched the forums for wm 6.5 ROM, but lots of them are still in beta phase,have bugs or slow.
can anyone give link to a stable WM 6.5 ROM for my xda orbit
Thanks in advance
...
6.5
Babbelut ROM WM6.5-28005 v0.3 NLD/WWE
*spb mobile shell is great, he is currently developing beta rom
http://www.sendspace.com/file/97d3p7 (download link for v.3)
http://www.megaupload.com/?d=ZTXWO4D7 (download link for v.Beta)
Downloading it now, will check it later on. THX
Was about to create topic but found this and hopefully will try this and hope it works on my XDA Orbit 2. I brought it off Cex from Aylesbury and it needs some love and update as i have Windows Mobile 6.1 (eeurrgh) and brought it off cos i thought i can upgrade to Winodws Mobile so i hope these works well for me.
Any introductions of doing that?
Thanks in advance.
First link didnt work. The XDA tried to block it by restarting it themselves. Tried third time. And unlucky.
Second Link. How can i use NBH file for my XDA?
...
Wrong place dude..
this is for xda orbit 1/artemis..
your looking for xda orbit 2/ poloris..
you need to be here..
Rn
Hi all I'm new here. My phone "O2 XDA Orbit" behaving strangely. Suddenly the sound disappeared and I can not hear phone calls directly into the phone, and any other person hears me not(microphone off), and not just one click sound on the screen. If I restart the phone with USB cable inserted into the phone and computer (on), then the sound occurs again(but not in original style, sound occur in to the back speaker not in front ), and phone function almost normally with microphone (on)>>> until the next reboot when sound disappear again and microphone is off. I mention that;.... connection the phone to the computer can not be achieved in any of this cases. The error code (USB connection) connection on my computer is {Code 10(One of the USB devices attached to this computer has malfunctioned and Windows does not recognize it)} who can not recognize the new hardware. In your opinion of specialists in this field what would be done? I think something happens to the ROM which gives errors of hardware power. The sound occurs when I insert into the phone power charger connector and disappears when the power supply plug out ... Please if you can help me with some guidance what I have to do one upgrade of ROM or something? Specification of the phone is:
[*]IPL-3.04.0001
[*]SPL - 3.04.000
[*]OS - 3.4.0.0
[*]CPU - OMAP850
[*]Speed 201Mhz
[*]RAM 64Mb
[*]Flash 128Mb
[*]Data bus 16bits
[*]ROM 3.4.206.2WWE
[*]ROM date 4/18/07
[*]RADIO Vers. 02.67.90
[*]PROTOCOL Vers. 4.1.13.28
[*]EXT. ROM.Vers 3.4.206.101
[*]MODEL of phone -ARTE200
[*]Platform - PocketPC
Funny ...!!! Today I put the phone to the charger and after I removed the plug from the power supply, the sound has returned, but the USB connection to a PC still can not set ...! What should I do? A new version of Windows can install on my phone; without connecting the USB cable to the phone(ex.-of my card micro SD)??
Adryum said:
Funny ...!!! Today I put the phone to the charger and after I removed the plug from the power supply, the sound has returned, but the USB connection to a PC still can not set ...! What should I do? A new version of Windows can install on my phone; without connecting the USB cable to the phone(ex.-of my card micro SD)??
Click to expand...
Click to collapse
have you got activesync or windows mobile device centre installed on the pc?
if yes..
i suggest you buy a new usb cable.
i have this problem with a couple of cables.
"USB DEVICE NOT RECOGNISED"
but when i change to a differant cable, everything is ok.
flashing via micro sd - upgrading windows.
have you done uspl 1.11.cmon?
Thanks for your attention Raving in the first place ...! Data cable has no damage that I checked the same cable with my photo camera and it works normally with PC and I have two more data cables and the problem is the same. It seems weird that the phone do some work once, ...once not. It starts when he wants the sound, and can not find any explanation ... In contrast with the USB connection can not establish anything, something happens to the sound module and USB ...PC see's something, but it's not sure what it is, and says he can not establish connection with the new hardware and it gives me error "CODE 10". in Universal Serial Bus Controller and the Active Sync is instaled on my PC but he don't say a word about this connection...I don't know on what to do...! I must mention that this oddity occurred only three days go and without them I do something wrong ... He grabbed him crazy after a normal operation for a year and a half, because we had no problems with it until now ... I used as a GPS and the phone and I was really pleased with him. By the way, what they mean uspl 1.11.cmon? All data of my phone are in the first post.The phone it was once unlocked by someone else, and now I can use any SIM card from any GSM provider..............I forgot to say that I've rebooted 2 times in general mode and now works but without USB connection sound when he wants it or not................But I think she has lost some registry ...!!!
click 1.11.cmon in my signature.
this will divert you to a tutorial thread.
when you can connect your device to your pc successfully, you should do the uspl 1.11.cmon but not for now. do not try and flash a rom yet either, you will break your device. (thats what uspl 1.11.cmon is for)
id like you to just try the "hard reset".
back up all your data first.
bookmark the page as ill be updating it regularly.
personaly i think its your usb cable, eg:
one of my cables works with a micro sd reader but not my for my device, i understand your cable worked but now does not.. however thats what happened to me.
Sound engages when he wants and where he wants. If I restart the phone, sound disappears and microphone stop; and I can not talking on the phone. Enter data cable from PC to phone, and give the phone restart. Once the phone is starts, sound appear but only in back. When talking on the phone sound very loud and sounds of the touchscreen controls can not disconnect the rear speaker who remains engaged and does not want to disengage it from the normal operating mode. Another job here would be that when inserted in the charger cable, the sound is right: each speaker and microphone or operational. If I remove the plug (charger) of phone then the phone function normally just like before, but without USB connection. If I plug "USB cable data" on the phone, to the desktop I see message "One of the USB devices attached to this computer has malfunctioned, and Windows does Not Recognize it. USB Device not recognized." If I unplug USB cable from phone the sound disappears, and what I have to do is to start over again.......!!!!!!!!!
I tested all data cables, and are ok. The problem is hard. The hardware has a technical failure which somehow blocks the data on USB. Battery power consumption is higher and the battery is discharged rather quickly than it was before the cage. At night when I charge the battery full, morning at 10:00 is only 30/40% of capacity. But what is even stranger is that: when I connect phone to PC, in device manager shows me the new hardware (Mobile Device) but after a few seconds there appear a connection error code (CODE 10) that is the hardware can not start. Active sync has not started when the fault occurred..... In your opinion what should be done in this case? ... Should contact a service or ... in any way I can test something before others get the screwdriver into my phone?
sabih00 said:
hi guys,
i have searched the forums for wm 6.5 ROM, but lots of them are still in beta phase,have bugs or slow.
can anyone give link to a stable WM 6.5 ROM for my xda orbit
Thanks in advance
Click to expand...
Click to collapse
Thanks, i will test...
The connection was made the first attempt. After a week of "digging" through all possible places I noticed that the connection was obstructed by the firewall.PFFFFFFFF ..... Finally found! The FIRE WALL(on PC) settings to be set: ADD PORT------ "Outbound UDP ----5679" -on exceptions tab....See this:http://www.microsoft.com/windowsphone/en-us/howto/wp6/sync/activesync-troubleshooting.aspx?WT.mc_id=FWLink
TKX Raving U're the best...
...
Adryum said:
PFFFFFFFF .....FIRE WALL
Click to expand...
Click to collapse
lol, i didnt think about the fire wall being the problem.. typical that it was something that simple.lol although it did sound like a dodgy usb cable..
thats something ill remember
have a good new year dude!
guys i am having a problem....whenever i try to install any ROM i get error 224 device not responding......my htc is connected through activesync.....what can be the issue...i am using windows 7.
..
raving_nanza said:
ERROR [224] : DEVICE NOT RESPONDING
check the ActiveSync connection and run RUU again. if problem continues, uninstall active sync and re-install.
Click to expand...
Click to collapse
1. unplug device
2. re-connect device to pc
3. wait for active sync/wmdc to connect
4. run ruu
5. if error continues unplug device
6. uninstall active sync/wmdc
7. re-install active sync/wmdc
8. restart pc
9. go to step 1.
Rn
quertz?
Hi raving nanza,
you did a great work with BAB v03.
It works great. sometime the touchpanel reacts slow but good.
But i can't change my touch keyboard from qwerty into qwertz.
HKEY_LOKAL_MACHINE\System\CurrentControlSet\Control\Keyboard Layout\"Active" is "00000407"
Thats the German code - but still having Qwerty?
HKEY_LOKAL_MACHINE\HARDWARE\DEVICEMAP\KEYBD\"TaskManVKey" is "0x23"
HKEY_CURRENT_USER\keyboard layout\Preload\1\"default" is "000000407"
What to do?
...
che.bike said:
Hi raving nanza,
you did a great work with BAB v03.
It works great. sometime the touchpanel reacts slow but good.
Click to expand...
Click to collapse
thats Babbeluts rom, not mine!
i merely suggest it to the other users
ill look into your qwerty to qwertz keyboard, when i find out ill post it here and ill update the tips&tricks thread
Rn

Categories

Resources