Database Users

XDA2 Screen, And Accesories For Sale

To cut a long story short, i dropped my xda2 in the toilet at work!
so went home and claimed it on my house insurance and i now own a lovely spvm2000 but im left with this xda2 thats been down the pan, the thing switches on and it all appears to work fine except its black listed, obviously coz i claimed on insurance so i will open it up and sling the pcb in the bin, unless anyone wants some componets from that, but i shall not be selling the phone complete or the pcb seperate. so for sale i have everything else here is a list of what i can think of
fully working screen with no scratches
houseing(scratched but back cover is fine)
4 styli (3 in original o2 retail pckaging)
all the box with instruction and sw cd
leather case
aluminium case (scratched)
Genuine Battery
Cradle
thats all i can think of atm, if u want any of it just make me and offer, dont want much for the stuff as its just sitting there redundant now and not being used!
if u can think of anything else that came with the phone that ive not listed let me know and ill let u know if i got it!
mike

NeCrOpHiLiCaT -- IF you cut the upper part of the PCB off, I'll like the board parts please. CYM

let mw know what bits u want and ill take them off hte board

hi
how much for the lcd ??

im open to offers on all the parts, make me an offer and ill let u know whether i like it or not 8)

I'm interested; did you get my e-mails? Hopefully I am not getting blocked.

pm sent

I need the screen..if u can spare obviously at some cost...pls let know

what about the housing?,my is very damaged and looking for another one.

Connector
Hi Mike, Im interested in the connector that is connected to the mother board, at the base of the phone , mine's gone caput ! :?

the housing is damaged but depends on how bad urs is if it worth akeing my one. the screen is still for sale, and as fot that connector what one do u mean?

connector XDA2
Hi the connector is the one at the base of the PDA, that connects to the dock for charging / activesync, and is connected to the PDA's Mother Board,
Thanks Brennen.

ok that connector looks easy enough to get off, how muchy would you offer for it, if i can remove it without damaging the legs?

How does twenty quid sound...............

did u still got the front AND/OR back casing (as long as it's only scratch not cracked) ? how much will it cost ?
thx.
contact : [email protected]

hi ,i need the motherboard
I can offer you 100.00 US Dollars for the motherboard, can you send me to New York city?
How much is going to cost me the shipping charges?
This is my email
[email protected]
we can work out about my offer
regards
Jorge

I am interested in the screen.
Hi
I am interested in the screen. Can you please give me an idea of how much you are looking to get for it. I am in london, how would it work.
thanx.

Re: connector
Hi, yes I'll have the connector ( £20) you can contact me on
[email protected] ok

i have a problems with my lcd.
http://img11.echo.cx/my.php?image=dscn44310av.jpg
how much for your lcd?
if somebody want another piece of my qtek 2020 (dopod) i can deal...

Wizard Repair Guide?! Mines Broken :(

Hey Guys,
Well, I'm a bit gutted really! I dropped my XDA Mini S on the floor with the charger in and the connector IN the phone has come apart from inside the phone. The little metal bit is practically hanging out. I'm wondering, if i were to take the phone apart could i re-connect the little part? (I have a soldering iron if thats as simple as its going to be?)
Just wondering if anyone had any guides on how to take the phone apart and take a look at whats wrong?
Any help would be so much appreciated!
Many Thanks,
Tom

The service manual is hosted on the ftp site.
ftp://ftp.xda-developers.com/Wizard/Docs_Tutorials/
Hope this helps.

I suspect you probably broke the socket off, but if you have a soldering iron, you might as well try to get a new mini USB connector to work with.

You might try Pocket PC Techs:
http://www.pocketpctechs.com/main~unit~UTStarcom_XV6700-554~area~repairs~item~REP-USBCON01~name~UTStarcom+XV6700+Mini+USB+Connector+Replacement+Service.htm
I rang them up about an issue I had (screen on the fritz) and they seemed pretty knowledgeable and helpful.
Alternatively there's a company I found today in the UK. I can't vouch if they're good or not.
http://www.xdarepairs.co.uk/home.asp
Good luck.

Well I also have an issue with my wizzard... the mini jack connector (of the handsfree) is a bit loose.
What I am saying is that it does have a good connection with the rest of the circuit and sometimes the sound of the speaker goes off, then I have to insert the habdsfree and tickle it a little bit until it has a good contact.
? have some basic soldering experience,do you think I should give it a try?

Given my device has been apart too many times for me to admit to I thought I'd crack it open to take a pic for you guys. Not sure if this pic will help for those wanting to do some soldering:
Very large pic: http://farm1.static.flickr.com/216/452691530_f47801708f_o.jpg
Excuse the dust.

Ah! That picture at the bottom is exactly what I needed. The metal but at the bottom (the big sqaure) has totally sheared off....bloody thing. Thanks so much for the info on the repair guides. I may give those repair guys a call if i can't get it to work myself.
Thanks alot you guys
As for you WizeMan, it all depends on if you wish to void your warrenty or not. At the end of the day, I installed WM6 on my device so O2 would give me the finger if i tryed to claim. If I'm honest, I'm getting an upgrade next month so I'm not to bothered if I balls it up! Would be nice if I got it working though....
Lemmie know how you get on

unlock k-jam
i read all your write about how to unlock k-jam device but after all i get this message:
Lock Status: 0000000000000000
SIMLock Code: █⌠═eי∟80Γ█Σ☻< δ♠
how can i get it from this .........

lironasseo said:
i read all your write about how to unlock k-jam device but after all i get this message:
Lock Status: 0000000000000000
SIMLock Code: █⌠═eי∟80Γ█Σ☻< δ♠
how can i get it from this .........
Click to expand...
Click to collapse
A little bit of a thread hijack but that means it is SIM unlocked.

Let me tell you my news, my friends.
I opened my Qtek 9100 and fixed two serious issues regarding this phone, using... sponge (the one we use to wash the dishes)
1. I put some into the stylus socket (from the thin space it has) and also
2. On the top of the mini jack socket so when i assembled the housing it blocked it from moving (2 of the contacts are no more soldered and i dint have a soldering iron at that time)
Anyway, both operation went ok and my phone is more than fully functioning. Now the stylus is hardly (in a good way) comming out (it first gets longer then comes out).
I wanted to do also the safe singal fix, but didnt find the photos to apply it correclty, so if someone has them, please give link. If you need any info about the "Sponge" Hacks, just post or pm

WizeMan said:
Let me tell you my news, my friends.
I opened my Qtek 9100 and fixed two serious issues regarding this phone, using... sponge (the one we use to wash the dishes)
1. I put some into the stylus socket (from the thin space it has) and also
2. On the top of the mini jack socket so when i assembled the housing it blocked it from moving (2 of the contacts are no more soldered and i dint have a soldering iron at that time)
Anyway, both operation went ok and my phone is more than fully functioning. Now the stylus is hardly (in a good way) comming out (it first gets longer then comes out).
I wanted to do also the safe singal fix, but didnt find the photos to apply it correclty, so if someone has them, please give link. If you need any info about the "Sponge" Hacks, just post or pm
Click to expand...
Click to collapse
I'm still trying to get the a new fascia and will probably shove an eraser bit into the stylus spring mechanism to ensure the defect never happens. Also how did you discover the break in the solder joints on the headphones jack? I have a funny situation where the left channel of the headphones doesn't work but I suspected the headphones (the plug has to be pulled at an angle to get any sound out of the left) but now I am thinking it may be the socket itself.
By the way the reception fix pic doesn't load for me either but I unless you truly need it, don't waste your time doing it; I always have all 4 bars and sometimes have 2 bars.

AsGF2MX said:
I'm still trying to get the a new fascia and will probably shove an eraser bit into the stylus spring mechanism to ensure the defect never happens. Also how did you discover the break in the solder joints on the headphones jack? I have a funny situation where the left channel of the headphones doesn't work but I suspected the headphones (the plug has to be pulled at an angle to get any sound out of the left) but now I am thinking it may be the socket itself.
By the way the reception fix pic doesn't load for me either but I unless you truly need it, don't waste your time doing it; I always have all 4 bars and sometimes have 2 bars.
Click to expand...
Click to collapse
Allright here is the deal.
1. I found out the break in the soldier joints when i opened it. I was really suspicious about it because when i inserted my headphone jack into the connector, i had problem with the contact; the connector was loose and it muted my phones speaker. When i disassembled the phone using the service manual i saw with my eyes that the the joins where f-ed up.
2. I dont really need the signal hack i just wanted to experiment, i have 2.25.11 cingular radio rom and its great.
Btw i suppose you should better use the sponge, because the rubber may wear off but not the sponge...

Thanks for the tip on the sponge. I am going to grab a used but allegedly "like new" body from eBay and also get one of those covers as well.

wanted htc wizard main board

I broke the screen on mda and purchased a replacement but I think i fried my main board during the installation of the lcd. Is anyone selling a mainboard for the wizard or know where I can find a mainboard? I have checked on ebay and have found broken phones with bad usb connectors or headphone jacks. I don't need that. If anyone is selling a mainboard for the wizard as well as the housing, as long as its in good condition, please let me know. Thanks --> Mistawright

Are you sure it's dead??
mistawright said:
I broke the screen on mda and purchased a replacement but I think i fried my main board during the installation of the lcd. Is anyone selling a mainboard for the wizard or know where I can find a mainboard? I have checked on ebay and have found broken phones with bad usb connectors or headphone jacks. I don't need that. If anyone is selling a mainboard for the wizard as well as the housing, as long as its in good condition, please let me know. Thanks --> Mistawright
Click to expand...
Click to collapse
I've just received a new screen for mine from HK. When I first put it in all I could get was a white screen, nothing else.
After ages of stripping down etc I found that it was the screen connector causing the grief - tape it down with some electrical tape and away it went.
Got versed in the art of connecting the screen to the main board and holding the battery in place at each stage of the re-construction to ensure it was still working.
I dropped mine and had vertical lines on the right side of the screen. Now, with the new screen in, initially it was fine but has just started wavering a little on the right side, so I may have had more than just a screen issue. Still as long as it lasts until my Kaiser arrives from T-Mo I'll be happy.

So are you selling a mainboard or not? If you are not what was the point of your post?

mistawright said:
So are you selling a mainboard or not? If you are not what was the point of your post?
Click to expand...
Click to collapse
The point was in the subject of the reply: ARE YOU SURE IT'S DEAD?
I offered help based on my experience changing the screen and questioning wether your mainboard was really dead or not.
But if you don't anybody offering advice and only want to buy another mainboard without really checking if yours is dead or not then I'll shut up.

lets start from the beginning.
1) I broke the screen.
2) the phone would power on but cracked screen.
3) I bought a replacement
4) after taking the phone apartment and replacing screen phone does not power on
5) Amber light does not come on on phone when connected to charger.
Instead of suggestions like the topic of the thread says I'm looking to purchase a working mainboard or a phone with a cracked screen that works at a decent price.

Hi,
Did you follow any replacement doc to do the job? Or you just started alone? I asked you cause I got a LCD for my friend and together we replaced it without any problems. Everything is working fine! Remember that exist many pitty hardware parts during the process you should care about it. If you missed or have broken one of them, you'll probably fried the main board or similar component!
mistawright said:
lets start from the beginning.
1) I broke the screen.
2) the phone would power on but cracked screen.
3) I bought a replacement
4) after taking the phone apartment and replacing screen phone does not power on
5) Amber light does not come on on phone when connected to charger.
Instead of suggestions like the topic of the thread says I'm looking to purchase a working mainboard or a phone with a cracked screen that works at a decent price.
Click to expand...
Click to collapse

X1 Ribbon cable - what happens and a fix I came up with!

Hi, I come on here quite a lot for information as it's an amazing resource! This time however, I'm attempting to give something back!
I experienced the "black screen on slide out" on Monday. Phone completely screwed. I've also had a few droppages and had it apart once before so there's no way warranty is gonna help!
I stripped it down and soon discovered what it is that actually fails on the ribbon. The coating had worn through due to rubbing on something during the slide out / in process. it had been playing up for a while, probably due to shorting out on the metal case, but now the tracks (aluminium?) had worn right down.....
In pic 1 i've circled the worn area. The shiny section is where i'd tried taping over it to prevent shorting, before i realised the tracks were gone.
Got an almost new one off ebay for 15 quid and, realising it was going to happen again, came up with a solution that, so far, looks like it will work....
A while back I bought some "anti rattle felt" for my car's dashboard - really thin and strong self adhesive felt to prevent squeaking joins between dash sections. I cut a piece of this and stuck it to the new ribbon. Once this stuff is on it's well stuck, by the way!
See pic 2 for the modded ribbon cable.
On reassembly everything is working just fine so far! Here's hoping that it lasts longer than 6 months this time!
Just need a new casing now as mine is decidedly second hand!
Hope this turns out to be of use to someone!

cool story bro

when i took apart my xperia to replace the housing this seemed like a really weak point in the device. glad to see someone who has had the problem has been able to fix it

Why does the screen go black?

Hi,
When the coating wears off the ribbon cable it exposes the tracks in it. when you slide the keyboard out the exposed tracks short out on the metal casing and the screen loses it's input signal.
thats whats happened on mine at least and i presume quite a few others?
HTH!

Update:
That's interesting: My phone was also losing signal with the keyboard out, and occasionally while closed up as well. It would just randomly drop to "no signal" for a few seconds.
It hasn't done it since replacing the ribbon cable.....could be coincidental of course.

I'm having the same problem
It just started a week ago and I got the phone in January off of ebay. I'm new to opening up the phone so could anyone help me find the correct tools or have a link to a site with pictured instructions?
I noticed that the sliding mechanism started to go loose about 4-5 months ago but didn't expect the screen not respond in landscape mode. I have yet to see the other symptoms you all are referring to. I would like to fix this before it get worse.

In mine case it went totaly black after one week of this problem... You have all the instruction on youtube, there is where i looked. For tools you can be inovative, but the exactly right ones come with housings from ebay, it is only 15EUR, and i bet you have some cracks so it wouldn't hurt replacing. That is what i did, along with ordering new sliding mechanizm, and new ribbon cable.
I am open for ideas to prevent my ribbon cable from being cut at it weakest point again.

I'm assuming my flex ribbon went bad yesterday, since sliding the keypad out causes my screen to shut off.
Already ordered a cable off ebay and will attempt to replace it myself :O

Replaced my flex ribbon cable with one I bought on eBay. The screen doesn't turn on at all now, which leads me to believe the cable I was sent is defective. Put the old one back in and it works okay, less landscape mode. ughhh what a pain.

great tips! my input is I bought a case off of ebay that was ~60$ and everything actually fit fine for me...so I wouldn't discount every seller but you do get what you pay for, the 15$ cases are probablly the ones that will give you problems

I working in a mobilephone repair center if anyone need help drop me a priv... i able to get 2nd hand or even brand new components

Replaced the flex ribbon cable -
I got my flex ribbon cable a few weeks ago and took it to my local repair shop. They replaced it but the LCD screen/optical joystick receives no power. The touchscreen and everything else on the phone works just fine now. I thought it was a defective item so it was exchanged with a new one.
Got the repair shop to replace it again and the outcome still remains the same as the first.
Theres no light coming from the screen nor the side illumination.
I just told the repair shop to just place the original back in for the mean time.
Before the repairs, there would be a flicker of white light and random illuminations. Now there's no lights at all except the power botton.
Could it be defective a batch that the seller was sending out? or the repair shop's mistake and is playing dumb so they do not have to admint fault?
Hopefully there's an easy fix to this problem.
-Also I did inspect the ribbon before and after the repair. looks new as the OEm
Can anybody help me out with this new problem after replacing the cable -

perhaps you should try a hard reset. Ive had problems in the past where the optical joystick and the illuminators did not work, and that worked for me.
On the other hand, the top illuminators are on the same piece of hardware as the flex cable that was replaced, so a faulty flex cable is possible. The bottom illuminators are on the circuit board that the optical joystick attaches to, separate but connected to the flex cable.
Ive recently replaced my flex cable and touchscreen. The experience i had with the faulty touch screen was that it appeared to receive no power, but was in fact displaying a dark backlit illumination that could only be seen in the dark. At the same time however, the screen did not display anything. I'm not sure if this is similar to your experience, but if so then your touchscreen would need to be replaced.
ive done all repairs on the xperia myself, and one thing ive discovered is if something doesnt work right after a repair, simply disassembling it and reassembling it to make sure all the connections are properly done has worked for me in the past.
"Before the repairs, there would be a flicker of white light and random illuminations. Now there's no lights at all except the power button."
Now when you say the power button, do you mean that a red light appears under it?
I dont know if i can come to a conclusion or that i can help (or have helped) you come to a conclusion, but i can only assure you that the xperia acts out in strange and weird ways.
Good Luck!

Tags
Dismantle / Disassemble Sony Ericson Xperia X1
http://www.ifixit.com/Teardown/Sony-Ericsson-XPERIA-X1/788/1
http://www.formymobile.co.uk/xperiadisassembly.php
http://www.youtube.com/watch?v=AWDurQrRt-Y (REAR)
http://www.youtube.com/watch?v=iyGUbxFqvyc&feature=related (FRONT)
http://www.youtube.com/watch?v=elgC8hwHfYQ&feature=related
For info.
Mike

Thanks for the links. I've tried the hardreset and restoring the original rom but the issue is still there. It's really bugging me that everything works but the LCD screen. I'm currently using MyMobiler to use my phone. The touch screen works fine and so does the soft keys. Just no power for the lights. I might just give up and wait for another phone that catches my eye and then tinker with the xperia myself. but if anyone got a solution or want me to test something then I'll give it a try.
My warranty is no longer affective so I'll use my phone as a tester to help others with any problems.

TRIONDAVE, how's your Xperia running now with the cable mod that you did? Its been 6 months since you created the thread. I hope you're still around.
My Xperia X1 works nearly fine, except for the keyboard issues, so I'm thinking of opening it up. If your Ribbon mod helped I might just do it too once I've got it opened. Mine has a MOUNTain of cracks though, and the battery compartment itself is cracked on both side enough to make the compartment CURVED. Hence the Battery cover doesn't sit well.
I'm looking around for broken Xperias which I might be able to use to change the internal cracked casing. Lets see.

DatDereX1 said:
cool story bro
Click to expand...
Click to collapse
My thoughts exactly.

Hello guys, I am in need of real help over here!
Its just that Ive replaced my ribbon cable, the old one got screwd up.
However I got done for 10 minutes ago, tried to start up the phone.. without success :,(
The ribbon cable doesnt have anything to do with the start up, only the screen am I correct? Cause I cannot even start my phone..
Ive connected the charger, but when I remove the battery it shows a red light, meaning no battery, correct?
So what may the problem be exactly? Maybe the battery is all dead, or?
PLEASE HELP!

for the people with ribbon failures how long have you had the phone before it occurred ? im just interested on the cables lifespan.
mine is fine so far but i have noticed the slider is flimsy and rocks left and right.

Needed Button Strip - Anyone have HD2 Parts?

In the process of replacing my lcm, I managed to tear the button flex cable that connects to the mainboard.
I am currently looking for a the button flex replacement. What is the best way of tracking something like this down without going to HTC?
If there is no current seller/merchant available...Um...Is anyone selling an HTC HD2 for parts!?!?!?
Pics included...You can see the button strip, and the little 45 degree angle break on the flex..SUCKS!

I saw the break... Man, that's bad luck...
I hope you find a new button strip. The only other solution would be to solder fine wires from the point I highlighted on the photo. But that is very very very difficult... If you decide to do so until you find a new button strip I would recommend you to let an expert solder it, for example a television-technician. That shouldn't cost you more than a bier for the technician!
Wish you luck!

This just in, I have since purchased a broken hd2 and replaced the button strip. It has a light adhesive and is mounted on two small plastic posts on either end. To loosen the adhesive, just apply gentle heat (blow dryer) and GENTLY peel off. You might come across a stubborn part and want to give it a harsh tug, but you need to methodically peel it up using some sort of flat piece to get from underneath it.

Another torn flex Anyone has spare one or knows where can I get it?

I'm sorry but can't help. I get parts for iPAQs from iPAQ Repairs in the UK. I'm surprised there isn't something similar for HTC parts.
I'm interested in what an 'lcm' is. I've seen it mentioned but with no description.

i need one of these too. i hate htc's policy in not selling parts directly.
This button board should only be like upto $40 usd.

im needing a main board charger soxet broke if price is right ill sell

I have the same problem ....you solved?
where did you buy?

Hi
I got a keypad PCB on eBay... But it was very expensive

Found it http://cgi.ebay.com/Flex-Cable-Keyboard-PCB-HTC-HD2-T8585-HD-II-2-Leo-/320562469094

please how we can solder this wires
please how we can solder this wires

dvdaio said:
please how we can solder this wires
Click to expand...
Click to collapse
You should be a good electronic technician or know a good one. Otherwise I advice you not to try. I am a ordinary technician and I can say that in my case it was very very difficult and even if I tried hard, I wasn't able fix all connections. Only two of my buttons work right now.

How to Replace Button Strip?
Anyone know of a link showing how to replace this strip? Either I can't find key words for a search or there aren't any good videos out there. - thanks

Good to hear I'm not the only one to snap it so easily. Ordered a replacement from e-bay.

Sorry to dig up an old post but, I need that little wire that connects the wifi/bluetooth module to the main board. I replaced the digitizer in my phone and I somehow jacked up one of the ends on the cable. Anyone out there have parts?