Hello Everyone. i have a pc that is hooked up on a LAN that gets net access via VPN on a local host. My PPC (XDA2i) on 2003 se is connected to my pc via Bluetooth on a PAN. so what i need is for the PPC to be able to access the LAN so it can connect to the host computer via VPN for net access... i tried 2 different apoproaches.
#1 I bridged the 2 connections (PAN and LAN) under the same Subgroup as the host. eg : 192.168.0.xx , Host = 192.168.0.1 . problem is the pc is unable to ping the PPC and vice versa. so if they are unable to ping what more establish a VPN connection. strangely, the pc is able to access the LAN, but the ppc isn't.
#2 I tried using XP's ICS. I enabled all the forwarding settings and assigned the PAN a different subgroup IP (192.168.1.xx). VOILA !!! the ppc is able to ping the host (192.168.0.1) I'm assuming the pc is forwarding ping packets to the ppc. but the pc acting as a NAT doesnt help solve my problem. weirdly, the ppc is unable to establish a VPN connection.
the type of VPN is unsecure uncrypted PPTP.
thanks everyone in advance
Related
i got usb wlan adapter. it's ip is 192.168.1.130.
the lan adapter in my pc has 192.168.1.84 ip.
all computers on my local wired network has 192.168.1.* addresses and 255.255.255.0 subnet.
i fixed the IP of SD sandisk wifi adapter on my mda compact to 192.168.1.131.
Usb adapter is in peer-to-peer (ad-hoc) mode and i normaly connect with ppc to it. i got 80-100% signal all the time.
the problem/question #1: why i cant ping from ppc to PC ? firewall turned off.
#2 - if i could ping it, would i be able to ping all the other ip's on my wired network?
#3 - if i could be able to ping all of those computers, how should i set-up a workgroup on ppc and be able to map network drives through wlan link?
#4 - if i would be able to map the drive over wifi link, would i be able to add mine 20.000 mp3s to the pocketmusic's playlist and play them wirelessly?
thanks in advance!
And when i ping from PPC - i see on pc that "received" packets are raising -
ie. now it shows 12 packets received, when i run ping on ppc to pc, the
number increases to 16 (4 pings!) but all are time-outed....
And if the IP on both sides are set to "automaticly", they got assigned
169.254.*.* IP's. Then the ping goes through correctly but i can't still
access the network. The network bridge between LAN and WLAN connection only
made things worser, making my internet connection unusuable (DSL through the
same LAN connection) so i deleted the bridge. Now - ping is going but i
still cant map my pc's drive.... what could be the problem...
Same problem
Dakky,
I have the exact same problem. I bought a Netgear WG111 Wireless USB dongle. I created an ad-hoc network, connected to it but can't connect to the internet or browse my shared. On my desktop the sent packet go up but not the recieved.
Are we both being stupid, can't you connect your PPC to your PC using an ad-hoc network? I have now tried to connect with two different desktops to my XDA and a friends XDA IIs running WM5 to my desktop but had no success. I can connect to an access point and browse file/internet no problem.
I have an XDA EXEC and run XP Pro on desktop.
I've got similar problem. I have Linksys Wireless-G usb network adapter, i assign same class IP adresses (192.168.2.1, 192.168.2.2, mask 255.255.255.0) the wifi connects in ad-hoc modebut how can sync over wifi ?, if I am able to sync over wify i will be able to use my pc's internet connection wich is a lot faster than any gprs/edge
I don't think you can network in this way - basically you have a bunch of clients but no 'server' I think you need a wireless hub (with Internet connection in there somewhere) in there somewhere.
If you do a search on microsoft web site ther is some info about using a PC as an internet share for other PCs but you have to use a very specific IP address rnge for this and set the share PC up in a certain way
Hello Everyone. i have a pc that is hooked up on a LAN that gets net access via VPN on a local host. My PPC (XDA2i) on 2003 se is connected to my pc via Bluetooth on a PAN. so what i need is for the PPC to be able to access the LAN so it can connect to the host computer via VPN for net access... i tried 2 different apoproaches.
#1 I bridged the 2 connections (PAN and LAN) under the same Subgroup as the host. eg : 192.168.0.xx , Host = 192.168.0.1 . problem is the pc is unable to ping the PPC and vice versa. so if they are unable to ping what more establish a VPN connection. strangely, the pc is able to access the LAN, but the ppc isn't.
#2 I tried using XP's ICS. I enabled all the forwarding settings and assigned the PAN a different subgroup IP (192.168.1.xx). VOILA !!! the ppc is able to ping the host (192.168.0.1) I'm assuming the pc is forwarding ping packets to the ppc. but the pc acting as a NAT doesnt help solve my problem. weirdly, the ppc is unable to establish a VPN connection.
the type of VPN is unsecure uncrypted PPTP.
thanks everyone in advance
I've installed a dhcp server on my windows xp pc via dchp turbo.
because i want internet access on my magician via wlan, so i shared the internet connection of my desktop pc via wlan with this dhcp application.
On my notebook, i get all the IP's from this dhcp server and the internet connection works.
But on my Magician (Spectec SDW-820), i dont get the Ips via this DHCP.
Which services does a pocket pc need to get the ips from the server ?
I just registered on my desktop this services: DNS Server, Gateway Server.
Hi, i need help about connecting my Pocket PC and using ICS
So this is what i want to achieve:
1. I have internet connection on my laptop via LAN
2. when i connect my HP IPAQ 114 with usb cable and sync using Active Sync i have internet on my PPC
3. I have another laptop that i want to "give" internet to via my wireless card on PPC connected wireless-ly to Laptop2
4. This is the scenario i like to create:
http://digitanium.blogspot.com/
Can someone help me with this?
I do the same thing as my curent internet is from a usb modem
so i turn on internet sharing on my pc
and set my phone's ip to be on the same subnet in my case 192.168.0.X
set my gateway to the ip on the pc in my case 192.168.0.1
set my dns to the same dns the pc use
if you don't know your dns
you can get it from a console and typing
iconfig /all
on your pc
tnx but i tried that and then i don't have internet on pc1 because of the mac of it is my password to the internet provider
can i somehow fis that?
ok i set my Local connection1(internet) to ics to the local connection 4 (activesync created and it made its address 192.168.0.1)
this seems to be normal but now my active sync can not connect to my device
and my laptop1 ip must be 10.10.16.79
Hello!
I have connected phone to PC and set 'internet sharing' on the phone, to have internet access on the desktop. It works well.
Then I connected other PC to that PC, both through LAN cards and set up home network.
Then I wanted to set up ICS (internet connection sharing) on the host PC, to access internet also on the other PC.
Problem is, that ICS is by default using address 192.168.0.1, which you can't change in winXP. And also my phone is connected to the host PC with the same address, which if I change, I loose internet connection on host PC.
How can I change this address which phone uses to connect to PC?
semi-bump.
Current setup: cable modem w/ wireless beams connection to my PC via wireless LAN. Modem is 192.168.0.1 on LAN, I'm .9, static. I want to setup ICS from my PC to my mob by bluetooth, as the wireless connection in my room is awful so I have to have a USB wireless adapter snaking under the door & out into the hallway.
Problem: ICS setup wants to host the service on 192.168.0.1 but that's the router & can't be changed. Is there any other way to do this? Cheers anyone.
can i circumvent this by connecting to the pc using bluetooth via activesync? won't i still need to setup ICS in the bluetooth config, or does activesynch overrule it?