Hello,
I have had a problem for quite some tome now with exchange server sync and my qtek 9100.
we have wifi at work and I can sync fine with exchange server, however when my phone is docked and connected to my pc it will sync with the pc but not with the exchange server. It complains about a netork problem when cconnecting and I presume it some clash with the LAN connection created via the pc and the pc wifi. I had accepted this and left it at that until recently I did a sync at home where I have a very similar wifi setup. the fone is connected to the pc and does a sync with both the pc and exchamge server fine. both the fone wifi and pc wifi were on and a LAN connection was also created with the pc and phone aswell, yet the phone was syncing fine.
Can anyone shed some light as to what is wrong with my work/phone setup so that it will also sync with the server when docked. The only differnce in setup is that my work wifi on the phone settings is for `WORK` and the home one is for `THE INTERNET`
Jass
After Some digging on the forums I found the following threads which have solved the problem
http://forum.xda-developers.com/viewtopic.php?t=47031&highlight=exchange+server+sync
and
http://forum.xda-developers.com/viewtopic.php?t=47874&highlight=exchange+server+sync
This then brings up the question of what does it mean to be connected to "Work Network", "The Internet", and "Automatic" in the Active Server Settings?
Related
Hi,
I understand that you can sync XDAIIs with outlook on my laptop connected to a server through some software, any ideas please.
Many thanks
Hi,
I'm not 100% sure on what you mean. If you can "physically" connect your IIs to the laptop (WiFi or USB or even BT) then you can simply use the normal ActiveSync route, install ActiveSync 3.8 and just link the two together.
Otherwise you can instead have ActiveSync (on the device itself) running in Exchange server mode and it'll ActiveSync straight with the server IF you have an Exchange server. I use this method myself and it works perfectly even over a GPRS connection.
Hope that was of some help. Sorry if I missed your point.
Before I set up push email my phone synced to the exchange server fine via USB, but whenever I sync my phone to my pc via USB now it syncs to the exchange server via GPRS not USB and I get an error on both pc and phone saying it is unable to sync to the server, I have tried disabling push and GPRS but still my phone won't sync to the exchange server via USB, this is reall annoying I can sync via GPRS but not USB, I don't mind this but the error message on the pc and phone I get each time just bugs me, anyone else have this problem and know how to sort it out...?..
check to see if you have the ce tificate installed. For the push to work you need exchange sp2 installed and security feature pack installed on PDA
what certificate adn where do you get it from, the PUSH is workign fine have AKU2 and SP2 i'm talking about syncing via USB are you like blind?, re-read my first post..
browse?
Can your PPC browse Internet sites while connected to your PC via USB?
I was experiencing this very issue for the longest time and the thing that worked for me was changing the connection settings in Activesync on the computer. Here is what I did:
File => Connection Settings => This computer is connected to: The Internet
For some reason, when it was set to Automatic the USB sync would work for a while and then stop altogether. Good luck.
I've been having a problem for the past week in that I could not connect to my Exchange Server or passthru to the Internet with and ActiveSync connection.
At least for the moment, on the Connections menu, clicking on "USB to PC" and disabling "advanced networking functionality" seems to have resolved the problem.
Anybody else run into this?
And what is this advanced networking, anyway?
I've also noticed that Sprite Backup would fail with it enabled, so it seems I've solved two problems at the same time...
i had that issue as well the work around i did was connect to my wifi connect my device to my pc sync then disconnect my wifi
still a pain
I've always just connected straight to the server over GPRS/UMTS. I haven't even installed Active Sync on my new PC.
hi Folks,
i have the same issue with Active Sync. I am using Active Sync for syncronizing emails, contacts etc ... I have discovered if you installed the device (hardreset) then you may able to sync with the exchange for the first time. After that you are not longer able to sync it.
I used different ROM's (Dopod, Qtek,O2) all have the same problem. I am not able to sync over Active Sync (4.2 latest and prior versions) with my exchange server. I need to sync over 3G Network and thats a bit expensive over the time with O2.
I think this device is more than incomplete since i am using a Wizard too and i have no problems with the same pc on my Wizard device.
I hope there will be a ROM update really soon that covers many issues discussed in that board here...
At least i am really disappointed about the device which HTC sold over the market.
Hi
On mine this works! - nevertheless i am using the IP adress - could be a hint for you guys
BR
Daniel
do you mean the IP address from the Exchange Server? Or do you pair your device with static IP addresses? :?:
Well ...
I got mine to work after i discovered that the proxy server i placed under gprs connection denied the connection to the exchange server. switching all to MyISP resolved the issue.
If you use a firewall try to look which address the RAPI Manager tries to connect to. Maybe that helps for you to solve your error.
Hi
I use the IP adress for the exchange Server name. The connection Between laptop and device is negotiated automatically
When I connectg my 8525 to my computer and Activesync starts it never syncs with my exchange server. It does this wirelessly but never when connected to my computer. I get the error: The server could not be reached. This can be caused by temporary network conditions. Support Code (80072efd)
Does anyone else get this and is there a way when connected to my computer the items selected for exchange server sync ( e-mail, contacts, calendar ) can be synched when connected to the computer as well? Wirelessly everything works fine.
__________________
Can anyone help with this issue?
yep i get the same exact thing, but dont know to how to fix! never had this prob with the 8125!
Hi,
after trying for hours I really need help:
ENVIRONMENT:
ELF (Htc Touch)
Laptop with Vista and Mobile Device Center 6.1
Office/Outlook 2007
Server 2003
WHAT I WANT:
Sync with our company exchange server both via GPRS (when I'm traveling) and USB (when I'm in the office)
Sync via GPRS works flawless. I configured the exchange settings manually. Synchronization of mails, contacts, and calendar works fine.
Problems start when I connect the device to my PC via USB.
The PC is in this case connected to our company LAN. After I plug in USB mobile device center connects and the synchronization starts. Problem is that it never ends. My device shows "waiting for network" and nothing happens thereafter. In the mobile device center error messages begin to pile up (saying that sync failed).
Aparently the device cannot connect to the exchange server via USB and the PC as gateway (at least, that's what I conclude from the messages). I've been playing with all settings I found but I'm stuck with the same problem.
There must be a way to do this! After all I had that in my old company (Windows xp and Windows Mobile 5), although i had to manually chose which connection I wanted to use.
PLZ Help !!!
Thanks
BlueDun
I found something!
Our exchange server has for internal (LAN) and external (internet) access different adresses. No wonder that it could not connect.
But there's the next problem: How do I configure so that I can chose the server depending on the connection I'm using? Of course, I could go to the exchange settings and change them every time I want to access but there must be an easier was that allows me to preconfigure two profiles for the same outlook mobile account.
Ideas please ...
Thanks