Camera not working - JASJAR, XDA Exec, MDA Pro General

I have an O2 EXEC running the T-Mobile ROM so that Blackberry Connect will work.
Everything is running fine except the Camera application. When I try to run it, I get an error saying something like the program is not signed and cannot run and I should try to re-install it. I have tried replacing the camera.exe app but, as it is a system file on ROM, it will not let me.
Any ideas?

Re-install
Turns out a full flash re-install was required to fix this problem

Related

Unable to remove programs

Hi all,
From some time I'm unable to properly remove any installed software, doesnt matter if it was just installed seconds ago or while ago. When I try to remove, I'm getting: "Some_software was not completely removed. Do you want to remove it from list of installed programs?".
In fact, nothing is removed. I tried soft reset few times. Also, I'd like to avoid hard reset since its quite a lot of work. Someone maybe possibly have an idea how to fix it avoiding hard-reset?
thanks,
Chris
try to remove the program using Activesync. Maybe it will help you.
thanks
The only way to remove all the files is to ask the software developers for a list of files / extentions. I had this problem when trying out different software and found when trying to re install some, the re installation failed. After removing all the files, I was able to re install.
Ralph
When you try to uninstall a program which has components running in the background you will fail.
If you make a softreset and try to uninstall it again, you will success.
Another choice to uninstall these programs: it seems totally defferent than the problem, but when I use vijay555's phone-kill application I can uninstall immediately those ununinstallable softs.
That's it.
It works.

skype and pocketSnes won't launch on o2 exec?

So I just installed skype yesterday, and it ran fine, somehow today when I try to run it, the window busy logo pops up but than it never launches! I tried uninstall than reinstall to my device, than the SD card, but still no luck.... I click on the icon and it just won't launch, I check all my running apps, it's not listed in there......
same thing with my pocketSnes, it will launch fine, but when I try to load any ROM, it will just disappear.
I have 23mb free on my o2 exec and they are all on my device instead of my SD....
can anyone please help or give any suggestions?
thanks in advance.
skype needs lots of rom to run
shut down everything else, if necessary, do a soft reset.

Can't uninstall app

I tried to install Bandswitch except for some reason it didn't work so I tried to uninstall it, it said that it was not completely removed and if I want to remove it from the list of installed programs, but the app still shows up in the uninstall list and I try to install the latest version it says it can't since there is a version already installed, it also tries to replace it but gives me an installation unsuccessful message.
Is there any way of completely getting rid of this and then being able to install the latest version.
sounds like you might need to hard reset unless you speak to the developer of the app you are having problems with.
unless... try installing the same version again?
aLlamaWithARifle said:
I tried to install Bandswitch except for some reason it didn't work so I tried to uninstall it, it said that it was not completely removed and if I want to remove it from the list of installed programs, but the app still shows up in the uninstall list and I try to install the latest version it says it can't since there is a version already installed, it also tries to replace it but gives me an installation unsuccessful message.
Is there any way of completely getting rid of this and then being able to install the latest version.
Click to expand...
Click to collapse
Hi. You can use SK Tools to uninstall the app, and also use Memmaid to delete the shortcut(icon).
No hard reset needed
Windows Mobile can be a ***** for uninstalling apps. Usually if there is a process still running for the app when you try to uninstall it you will run into trouble.
Soft Reset between using an app and trying to remove it. Of course if the app loads itself on Start-up this will be futile
In this case it may be a Hard-Reset to fix the isue. Sorry.
rumz82 said:
Hi. You can use SK Tools to uninstall the app, and also use Memmaid to delete the shortcut(icon).
No hard reset needed
Click to expand...
Click to collapse
Agreed, if you are using the "remove programs" option that comes with the phone, its not good.
I use Memmaid and it always removes it completely for me so as mentioned give that a go first before a hard reset.
aLlamaWithARifle said:
I tried to install Bandswitch except for some reason it didn't work so I tried to uninstall it, it said that it was not completely removed and if I want to remove it from the list of installed programs, but the app still shows up in the uninstall list and I try to install the latest version it says it can't since there is a version already installed, it also tries to replace it but gives me an installation unsuccessful message.
Is there any way of completely getting rid of this and then being able to install the latest version.
Click to expand...
Click to collapse
Are you trying to uninstall via ActineSync/WinMODeviceCenter?
Do it from the phone and install by copying your cabs to the mem card and ruuning the installer from there.
Then you won't have a history of installed apps that builds up with AS/WMDC.

Problem after NoDo update with Tom XAP Installer

I am facing a problem, I can not sideload normally apps using Tom xap installer. I have my phone synchronized, start the deployment and after sometime I get an error saying that my phone is locked or zune is closed. BUT, the app has been installed, it can be found at the app list. The problem is that some apps don't start after that and the ones that start are slow and buggy.
I also cannot run WPDM I suppose due to the same reason, either fails to launch touch experience or if I manually launch it there is no connection.
Right now I am using blacksideseven v1.5.7392 but the same thing happened with BoyPPC's v5 rom.
I never had this problem with the original DFT rom (although WPDM was still not working).
Any ideas will be appreciated,
thanks
It crash on DRM protection. Have this problem too. Never had problem on 7008 roms.
I had the same problem when I briefly tried 7008 just before the NoDo came out...
Just remove DRM from XAP
Download http://forum.xda-developers.com/showthread.php?t=908293 and use Deployer with DRM remove.
I am a bit skeptical, but I will try it. thanks for your answer!
nevermind. I deleted tom xap installer and I instal xaps using WPDM and everything is fine now. probably there was a conflict between those two. Now I have to figure out how to access files using WPDM because although it says connected, I can't.

[Q] Swiss cheese ee03 Camera

Has anybody with this rom flashed had any troubles with the camera fc'ing when trying to take a picture? For the longest time now whenever i try to take a picture it would fc and tell me the process com.sec.android.app.camera has stopped unexpectedly. Could someone with a working camera send me their apk from the /system/app folder to test if that would fix my issue?
min0rity said:
Has anybody with this rom flashed had any troubles with the camera fc'ing when trying to take a picture? For the longest time now whenever i try to take a picture it would fc and tell me the process com.sec.android.app.camera has stopped unexpectedly. Could someone with a working camera send me their apk from the /system/app folder to test if that would fix my issue?
Click to expand...
Click to collapse
go under the camera settings and under the wrench icon tab their is an option on page 2 i think to update camera firmware... select it... then select check firmware then select update... then run the samsung apps store app then it should say if their is an update to the camera. if shut down phone and turn back on and rerun the samsung app store...
i tried that already, downloaded the samsung app and re-ran it, says error service unavailable (error code 4002) when it searches for the firmwarer update edit: tried fixing permissions under cwm and would no-ciq play any role in not being able to get the update?
min0rity said:
i tried that already, downloaded the samsung app and re-ran it, says error service unavailable (error code 4002) when it searches for the firmwarer update
Click to expand...
Click to collapse
i would go into clock works mod and then reset the phone and do under advanced i think and clear delvik cache. I would also not use a program like Titanium Backup as you could be restoreing files that are causing the issue. The only restore i do is with my backup and text messages only. I then let the market place update all programs then after that is done I then install from the market my programs... I also recommend that you delete everything on the sd card other then your music and dcmia folder (camera saved pics).... then reset the device.... and then after reflashing then rom then do the no icq then do the fm radio gtalk thing then turn it off and use odin to flash the modem...
i used the ee03 tar to flash the rom to my phone so everything was already done including the modem. i tried clearing the cache and fixing permissions with no luck. ill give resetting the phone a try and see how well that will work for me. also before doing that, do you think you could send me a copy of your camera apk from the system app folder to see if that would work for me?
what you suggested isnt working :-\. i did factory reset, cache and dalvik 3x and and tried doing the firmware update and still no luck. i also formatted the sd card and removed all the extra stuff off of it
min0rity said:
i used the ee03 tar to flash the rom to my phone so everything was already done including the modem. i tried clearing the cache and fixing permissions with no luck. ill give resetting the phone a try and see how well that will work for me. also before doing that, do you think you could send me a copy of your camera apk from the system app folder to see if that would work for me?
Click to expand...
Click to collapse
ok will see what i can do for you... here is mine from stock 2.2 i will reinstall ec05 later today...
i dont think the 2.2 camera/firmware will work with 2.3 would it?

Categories

Resources