man this is one,i was feeding my cat before i headed off the bed with my exec in the side pocket of my jacket, as i bent over i felt my exec slip and before i knew it, it landed in the cats water bowl..
like a ninja i grabbed it so it was under for maybe .5 of a second, i dryed it out over night with toilet paper and a hair dryer, it doesnt turn on, but when i plug it in over usb, windows see;s it and instead of a green light for charging i get a red one.. can my exec be saved?? i love her dearly
-mofo
Delete this thread and start one with a less stupid title.
the title is thus, as i have dropped my $1200 mobile into a bowl of water on this mobile is stored my day to day running of my company, it is 11pm on a sunday night and i have lost all the infomation i need to pull a pay cheque for the following week, so i belive the title is not retarded i belive it is fair.. lets see what you say when you drop yours in a pool/spa..
cheers
-MoF0-
mofotron said:
lets see what you say when you drop yours in a pool/spa
Click to expand...
Click to collapse
I'll say - "HELP: Dropped handheld into water - How can I bring it back to life?"
Not "OH GOD HELP ME!!!"
So, Mofo (?), does ActiveSync still work?
mofotron said:
man this is one,i was feeding my cat before i headed off the bed with my exec in the side pocket of my jacket, as i bent over i felt my exec slip and before i knew it, it landed in the cats water bowl..
like a ninja i grabbed it so it was under for maybe .5 of a second, i dryed it out over night with toilet paper and a hair dryer, it doesnt turn on, but when i plug it in over usb, windows see;s it and instead of a green light for charging i get a red one.. can my exec be saved?? i love her dearly
-mofo
Click to expand...
Click to collapse
1. Buy a new exec
2. Sync it to your PC to recover your files
3. Buy a memory card
4. Buy a backup program and learn how to use it
mofotron said:
man this is one,i was feeding my cat before i headed off the bed with my exec in the side pocket of my jacket, as i bent over i felt my exec slip and before i knew it, it landed in the cats water bowl..
like a ninja i grabbed it so it was under for maybe .5 of a second, i dryed it out over night with toilet paper and a hair dryer, it doesnt turn on, but when i plug it in over usb, windows see;s it and instead of a green light for charging i get a red one.. can my exec be saved?? i love her dearly
-mofo
Click to expand...
Click to collapse
Normally when you get a red light it means that your exec is not recognizing that there is a battery inside it.
Perhaps check the battery? Is it seated right after the fall? could water have got inside the battery? Maybe your exec is OK but your batt is dead
I read somewhere that drying with heat ie hair dryer is a big no no - they need to dry naturally.
I shudder at the thought of this happening to me - but i read elsewhere that a guy dropped his in a puddle and it lived - so maybe you'll be lucky too.
Matt
cool, im over it, im sure its dead, so all i can do i pull it apart and clean all the boards and hope for the best..
as soon as it hit the water i pulled the battery pack off it, so less than a 3 seconds wet, then with a hairdryer on low.. i heated the case so i belive i got most of the water...
now.. when i plugged i tried to active sync it.. it didnt sync.. but windows found a usb device.. unplugged it.. ready to be pulled apart.. i got my t9 torx screws and switch cleaner anti static gloves/cloths also called into work sick,,.
still not sure about the red light tho.. atleast i got a light i guess.
-mofo
USB device huh... Like in bootloader mode I guess, but I don't know if this would help. Sorry.
cool im happy now, after doing an all nighter, and reading the serivce pdf, i pulled it apart blasted it with board cleaner and soaked all the boards.. dryed them by hand.. 6hrs and 14 cups of coffee later its back up :lol:
its up 110% i say 110% because before it took a bath it was looking grubby, bits of crap in the cracks etc etc.. now it looks brand new and works..
now if this should happen to anyone else i took the following steps
as soon as you get your hands back on it.. pull the battery out straight away..
wrap in a clean cleaning towl and gently shake the excess water out of the device
now this part is open to debate
i used a hair dryer to dry the device before i opened it.. on a low heat.. not directly onto the device.. but to heat it..
i rested the device on the heating vent for 4 hrs before cracking it open.
i have to say the confidential service manuel PDF is great thanks guys!!..
after opening the device.. i noticed a few spots of residual crap.. not much, it was easy to clean, few hairy moments put it back together fired it up and now its on the active sync doing its thing, the screen is bright and very clean
cheers guys, and the guys that pmed me, thanks ill return the tools after i get some sleep
Congratulations dude! Now don't forget to get a backup program for your Universal before something bad happens again! :wink:
I'd just like to point out to anyone reading this that if your Universal is looking a bit on the grubby side, chucking into the cat's water bowl and taking a sickie next day to get it all dried out is probably not the best way to go about cleaning it. You run a fairly good chance of a broken phone, and a scratched nose from your very pissed off cat. :lol:
lol @ shuflie!!
Dude, where's that PDF file? I'm having problems looking on the FTP at the mo. :-/
Guys,
We have a radio technician as one of the moderators over on MTekk and he recommends Isoprophil Alcohol (from **** Smith) to expel the water. Ironically it was only a couple of days after he told us what to do that I dropped my XdaII down the toilet (flushed fortunately)!
Steps:
1. PULL THE BATTERY! It is current PLUS water which damages the boards.
2. If you have one (and can)... pull the backup battery.
3. Hold the thing tight and spin it around at arms length to spin out as much water as possible.
4. Open the thing in a clean area on some kitchen towel (or whatever) and fairly drown the boards in the Alcohol, this dispels the water. Use a number of orientations to get the stuff everywhere - under components is the important place. Try not to drown the screen itself, any water in there will disperse over a few days.
5. Use some canned compressed air to blow under suspect areas - gently and not too close or condensation forms, it's cold stuff.
6. Allow the device a good few hours to dry in a naturally warm, but not hot, area. Do NOT use a hair dryer, it can overheat the tiny compnents and literally blow them off the board.
7. Cross your fingers/pray/whatever and fire it up.
My backup battery didn't survive as I couldn't remove it and it shorted out, but the device has been pretty good since, all things considered. A few tiny marks in the screen is the only visible sign.
p.s. While I understand your feelings the post title really is crap, I nearly didn't bother to look.
Dear Mofotron, sounds to me like your device not restarting had more to do with your heating it up for 4 hours. Next time go straight for the isopropryl (aka rubbing) alcolhol and flush all the water out that way. :twisted:
Congratulations, awesome that the device is still working!
Is there any chance to see that PDF document´?
It's in the ftp site somewhere...
Yep, this link should do it:
ftp://xda:[email protected]/Universal/UNniversalL_Service_Manual_CONFIDENTIAL.pdf
mofotron said:
cool im happy now, after doing an all nighter, and reading the serivce pdf, i pulled it apart blasted it with board cleaner and soaked all the boards.. dryed them by hand.. 6hrs and 14 cups of coffee later its back up :lol:
Click to expand...
Click to collapse
You must feel very happy indeed
If you're looking for a good backup program, I suggest using SPB Software Backup....
Well its been almost a week now and i cant belive my luck, everytime i look at it, i get flashbacks of seeing it sitting in the bottom on the water bowl with the camera flash flickering.
ive had a zillion pda over the years from the palm 1x to the newtons 900/2000/2100 psions etc etc so ive had a fare experience when stuff goes wrong, just this time i think emotion really come over me.
being so late at night at the time 11pmish on a sunday i wasent really in the clearest of minds.. i had to get as much water out of the device as soon as possible, so resting on the a/c vent on 24deg and gently warming it with a hair dryer where the only options i had.. then i started digging in the garage for my old techie kit at like 1am, when i found most of the tools i needed and even borrowed a few off a local off this board!!! as soon as i cracked it open i felt better it was clean water so most of the water stains where easy to remove.
but now it works and thats all i care about.. no visable damage at all, no dead pixels or keys only werid thing is everytime i sync it now the date/time changes to 2-may-2004 3am, but i can live with that.
the sequence of recovery can be explain thusly
retrive device
remove battery and back up battery if you can
try and expell as much water as possible
crack it open
Iso Alcohol everything ( i used isorub its an australian product, from supermarkets, for general household use )
let everything fully dry out before reassembly ( 2-3 days i covered my boards in an anti static cloth for a day and a bit )
carefully put everything back together the video cable cant be bent at a certain point so you only have like 1-2mm or wire to fish thru the connectors.. all should be well if not, im sorry get another device and use it as parts.
-MoF0-
o2 Exec back from the dead.. " ZombieExec "
Well done MoFo, you managed to recover from a disaster that my wife puts her phones through on a regular basis.
Imagine, knowing that every time you go to the bathroom you have to drop your jeans, then keeping your mobile in your back pocket ... she has heard a premature splash 5 times so far.
Where in Tesco would one find IsoAlcohol? I don't recall seeing it thus far, but I'd have thought WD40 was a pretty good water dispersal agent too?
Good old WD40. Like my grandad said to me all those years ago:
Grandad said:
If it needs sticking use duct tape, if it needs unsticking use WD40!
Click to expand...
Click to collapse
(Anything else and you have your Leatherman, right?)
If only Leathermans had Torx bits, life would be so cool.
On the topic of thread titles, how does one become part of the Mod team? I see a lot of posts here relating to the title, and I would have been happy to change it =)
Related
Title says it all.
Phone was on before submersion and non-responsive after. I removed all easily removed parts (back, battery, SIM, stylus) and it is air drying.
Yes ... I washed my hands!
Any suggestions?
To be honest I think a total strip down my be in order to totally get rid of all the moisture.
I might be wrong but Never Say Never
Even if you totally stripped it down the damage is permanant and done
I'm not trying to be a downer, but here is the reality.
1) You probably shorted the phone out. It's dead
2) By some LUCKY chance you didn't short the phone out, let it dry for a LONG time with out supply any power to it. Assuming you can bring it back to live, the internals have already gotten wet. Water + Electronics = Corrosion. Your phone won't last long
That sucks man
I would suggest a full or as full as you can tear down and a flush with distilled water and then a very good drying.
I left mine out screen facing up in the pouring rain for 5 hours
was soaking but still working lol
the backlight wasnt happy though,
dried it out and took the battery out after playing with it wondering how it still worked.
all was well
occasionaly you get the white powedery corrosion on the various processor legs (makes contacts where you dont want them ) which most of the time cleaning them off with fix and issues .
Edit my wizard was playing some mp3s the otherday and fell of motorbike at 50 mph and hit the road , stopped picked it up it was still playing the same tune through the speakers ,
amazing build quality for a heavy device to survive that .
Just wondering... When using your phone in the rain is it dodgy? Like will it break the touch screen if it gets too wet? Should we all be buying gay covers?
TheGMan said:
Title says it all.
Phone was on before submersion and non-responsive after. I removed all easily removed parts (back, battery, SIM, stylus) and it is air drying.
Yes ... I washed my hands!
Any suggestions?
Click to expand...
Click to collapse
You should rename yourself the PMan! :lol: Sorry could not help myself :wink:
There is some hope for you - read this story http://forum.xda-developers.com/viewtopic.php?t=54874
If you plan on attempting to clean it, don't use distilled water!
The best thing to use would be pure rubbing alcohol.
Well ... disassembled and patted it dry. Left it out to dry for about 24 hours ... reassembled.
Viola!
Powers up and everything seems to working fine.
GldRush98 said:
Even if you totally stripped it down the damage is permanant and done
I'm not trying to be a downer, but here is the reality.
1) You probably shorted the phone out. It's dead
2) By some LUCKY chance you didn't short the phone out, let it dry for a LONG time with out supply any power to it. Assuming you can bring it back to live, the internals have already gotten wet. Water + Electronics = Corrosion. Your phone won't last long
That sucks man
Click to expand...
Click to collapse
Well you are a downer man.
New phones now are hard to short like that, though water do soak into the boards, just hope it didnt soak and damage your screen. Just take apart and dry.
I woke up this morning to find my 8525 sitting in my computer chair as usual. Only to reach over and grab it, and ....its sitting in three inches of water. I have no idea what happened, or how it got there. All i know is my phone wont turn on, and is totally dead. Is there ANYTHING that can be done to right this horrid tragedy? Any help would be a gift from god. Thanks
Wow.
Sorry about that.
Let it dry out before trying to use it. Since it's wet, you have nothing to lose by taking it apart to facilitate this. You could dry it faster by using a hair dryer but NOT on the heated setting.
agreed; but let it dry for a day or two before you try, you should also put it somewhere that will provide additional moisture evaporation (gas oven with pilot lights or a furnace room, behind a PC fan or the like). i saved my old Sony S710a by letting it bake in my hot car for about 6 hours while i was at work. just make sure its totally dry before you try, and considering you already voided the warranty with the pool of water incident, you might as well take it apart if you can to make sure its completely dry.
hmm, bad luck.
Try all the above suggestions. But make sure you have disconnected your battery
Tried putting the battery back in after about a good 4-5 hours of being in the sun. All i get is a crackling noise when i try to place the battery to the metal conductors
Ewww.. I know it is stressful for you not to switch on the phone, but doing that will just make matter worst. Since you said that it wont turn on, I presume that you've tried it once (Strike 1), and you did it again 4-5 hours later (Strike 2), which usually others just leave it for at least 1 day (but probably the sun does help).
Can you identify what water is it? Can there be mineral within? Which may cause a short circuit somewhere in the phone. You'll need to open up the phone and clean it up somehow.. either DIY or get some phone shop people to do it. Your warranty is 'washed' anyway.
Try This
Stop Drinking!
Read This To Possible Save You Phone
OK, this comes from my many decades in the electronics industry.
1. PULL the battery. Do not put it back in in few hours.
2. Where did the water come from? Was it really water or? You need to know this. It's real important because mostlikly the PCB is contaminated. Anything that got inside has most likely contaminated the board and will cause shorts, intermitent contacts and the like. Even rain or spring water, it's the minerals...
What you have to do most likely is disassemble the unit. Get a gallon of DISTILLED (not Spring) water. Distilled, also know as deionized is free of all minerals. You are going to have to carefully submerge the board without the LCD in the water and gently rub it with a very soft tooth brush while underwater. Next take it out and put in another bath of distilled water. Agitate it gently. This proces should remove any contamination as long as the offending liquid is not sticky or heavily acidic or base. In the case of the later 2, you are most likely screwed.
Ok, so now you have a wet board. Genly shake the excess water off of it. Turn your oven onto WARM. Nothing above 150 F. Let it warm up and then shut the oven off. Put the PCB in the middle of the oven directly on the rack, close the door and come back 8 to 10 hours later. If the board isn't dry, repeat the steps again.
If you are luck and didn't fry it from trying to power it up, it may work again.
I have saved lots of radio equipment from rain & saltwater submergence this way.
Feel free to PM me if you need to. Good Luck.
I used to have a motorola and dropped it into a bucket of water. Dried out in a few days and it was working fine.
my 8525 recently fell in the sink. as soon as i seen it in the sink i pulled the battery out. rigged the phone up on something in the floor so air could ventilate under and over, set the hair dryer on high (but without the heat) and 5 or so ventilation fans from a desktop pc wired to a 9v battery. let the hair dryer go for about 15 minutes but left the fans on over night. took the phone with me to school the next day and left it in the car during both of my classes. came out put the battery in and powered it up. works just fine now
http://www.wikihow.com/Save-a-Wet-Cell-Phone
ive heard the rice thing works, ive alway wanted to flush with alcohol, that would in theory dilute the water and the alcohol would dry out faster.
Ok so heres the deal. I put the battery in. Power up the phone, gets to the vp3g startup screen, then fades to white. Could someone point me in the direction of a tutorial that shows me how to disassemble a Hermes CORRECTLY.
Hopefully ill be able to give it a DI Water bath and breath a little life back into her. Thanks for all the help guys, I really appreciate it
It's drying out slowly. I had a Hermes that did the same thing - eventually getting to the "screen behavior" you describe. I never fully disassembled it. I just let it sit open, with the battery out, keyboard pulled out, and the back off. Eventually (after leaving overnight), it was fine. Worked normal ever since that with one exception.. I had forgotten to pull the SD card. The SD socket never worked again :-(
Moral of the story: don't forget to take out the SD card.
todd_jg said:
It's drying out slowly. I had a Hermes that did the same thing - eventually getting to the "screen behavior" you describe. I never fully disassembled it. I just let it sit open, with the battery out, keyboard pulled out, and the back off. Eventually (after leaving overnight), it was fine. Worked normal ever since that with one exception.. I had forgotten to pull the SD card. The SD socket never worked again :-(
Moral of the story: don't forget to take out the SD card.
Click to expand...
Click to collapse
yeah i got lucky. when mine fell in the sink i had the SD card out and in the laptop doing hw. so i guess im really lucky that the sd socket still works
Not worried about the SD card as much... Anyway, Ive popped the back off of my 8525 after removing a couple screws. On the back of the circuit board there is white material that can be wiped off with a little rubbing alcohol and an ear swab. What is that crap? Ill go further in depth here soon once it fully drys. I sure hope I can get this thing running again, birthday is the 13th and would be a nice little gift to myself to get the phone working. Thanks for the help guys
WOW Just look it here...Thats what I call the Power of Unity man. Great piece of work, info. I love all You people. If the world learns anything from XDA developers then there wont be any more human sufferings I am sure..Enjoy friends the power of forum..
If it fades to white, it is still wet.
You need to let it dry a lot longer before trying to use it.
Sterch said:
On the back of the circuit board there is white material that can be wiped off with a little rubbing alcohol and an ear swab. What is that crap?
Click to expand...
Click to collapse
Well, those are either stuff from the water or stuff from your phone that is washed and gathered to form some dangerous circuits (much like coffee water rings, that things tend to get to the edge of waters). These stuff may conduct electricity, hence making your phone goes nuts. Search and destroy all these 'crap' Good luck. Don't try the phone unnecessarily until you are sure that all 'crap's are gone. One of these 'crap' may potentially kill your phone (ok, it is usually not that serious, but just incase )
Sad story, I was lucky with similar story, but much cheaper. I left my Nokia BH-600 Blue Tooth Head set in my panties and give them to washing-mashine. 40 degrees program for 30 minutes ended by wringing on 800 turns/minute
When I found it in the pocket I just left it to wither up and it didn’t worked. So I tried to re-charge it and WOW it works and the battery has normal capacity.
Video of 8525 / Hermes being dismantled
Sterch said:
...Could someone point me in the direction of a tutorial that shows me how to disassemble a Hermes CORRECTLY ...
Click to expand...
Click to collapse
Don't forget the popcorn: http://www.youtube.com/watch?v=zsljpn74SW0
Hi, dropped it in the toilet today.
Been drying it off for 7 hours in front of a heated fan. Tried to turn it on, the HTC screen comes up but it's really faint so I took the battery out straight away.
What are the chances of it working again?
ethos84 said:
Hi, dropped it in the toilet today.
Been drying it off for 7 hours in front of a heated fan. Tried to turn it on, the HTC screen comes up but it's really faint so I took the battery out straight away.
What are the chances of it working again?
Click to expand...
Click to collapse
So you took the battery out after the 7 hours? - Not good in such cases the first thing to do is always to take out the battery - However I had a similiar problem a while ago - but with a nokia phone - local electronics store took it to repair it for free but **** happens I sim unlocked it and they told me I had to pay 200 bucks for the repair - I googled a bit and found that you should take the whole device apart and try everything seperated then put every single part into ethanol (I think it was ethanol not shure :S) over night and in the morning let it dry - repeat up to 5 times - if no hardware was fried everything should work again - my phone worked again
No, I took the battery out after like 20 seconds.
I then took it apart and wiped it off and put it in front of a heated fan for about 7 hours!!!!
I dropped my 8125 in a cup of Vodka and Sprite and took the battery out right away. Let it dry out for 12 hours, turned it on and got a white screen. Took the battery out again and decided to order an 8525 to replace it thinking it was dead. Hours later, I tried to start the 8125 again and it magically started working. Guess it was a long hangover but just shows that given enough time, it might come back.
WELL... left it in the airing cupboard overnight.
It now turns on fine, the screen is working but I can still see a little bit of water but other than that it all works fine.
Going to leave it in front of the heater again today to hopefully clear the last of it up.
CHUFFED!
To my home fish tank
My old sony eriksson drop into my fish tank.!!!
Initially it don't work.
I put phone and battery apart inside a big cup and covered it with rice and voila..., after two days it was like new.
It was an old trick form my mother.
Hope it help
Hints and tips available.
The best way to recover a water damaged device is to get yourself a good denture brush and some denatured alcohol. Take the device apart down to its base components. The board, LCD board components for your soft keys ect. The biggest problem that I've experienced is that it sometimes fries out the flash for the camera which will stay on. Now with your denatured alcohol and your brush just gentle scrub the board components and the connections this will absorb the moisture upon evaporation. Also its always good to have a nice heat gun thats also a good way to reflow contact points on the board say you have connection issues with your mini USB port. I've been doing electronics repair on PDA and cell phone devices for sometime. So anyone who has questions feel free to ask. I hate hearing about people who dump 200 dollars for a repair that you can fix by spending 5 dollars.
I would like to start a thread but since my membership is at the junior status I dont see it being read. But I will post it anyway.
C Brown said:
...I would like to start a thread but since my membership is at the junior status I dont see it being read. But I will post it anyway.
Click to expand...
Click to collapse
Sorry, I don't follow your logic. Post up what you know, based on your experience. I assure you it will be gratefully received.
Do a separate thread though, so it can be turned into a sticky by the mods.
Thanks
WB
Give it more time. I say 2-3 days to completely dry then try.
C Brown said:
The best way to recover a water damaged device is to get yourself a good denture brush and some denatured alcohol. Take the device apart down to its base components. The board, LCD board components for your soft keys ect. The biggest problem that I've experienced is that it sometimes fries out the flash for the camera which will stay on. Now with your denatured alcohol and your brush just gentle scrub the board components and the connections this will absorb the moisture upon evaporation. Also its always good to have a nice heat gun thats also a good way to reflow contact points on the board say you have connection issues with your mini USB port. I've been doing electronics repair on PDA and cell phone devices for sometime. So anyone who has questions feel free to ask. I hate hearing about people who dump 200 dollars for a repair that you can fix by spending 5 dollars.
I would like to start a thread but since my membership is at the junior status I dont see it being read. But I will post it anyway.
Click to expand...
Click to collapse
+1, the best way to clean your water damaged device and have hope of it working again.
It may take a while to work properly again; my 8525 went into water not once but twice! The first time I thought it was dead--lights on but only white screen. Had instantly removed battery and opened it up as much as I good and took some canned air to it. Kept checking it over the next week without success so went and bought another.
Anyway, about 3 weeks after the dunking I put the battery back in and on a whim turned it on and surprise!, works fine. This became my back up phone that I later took to Africa with me where I proceeded to drop it in a toilet. Since the air temp was 130 degrees it didn't take long to dry out and it's still kicking!!! Important point is to immediately remove the battery, take the device apart as much as you can, dry completely over a few days then attempt to turn on.
Hope this helps,
Steve
Mine went into the toilet this morning. I have disassembled it according to the directions (http://inuchanbt.blog54.fc2.com/blog-entry-100.html) and put it all back together after cleaning surfaces and connectors with alcohol.
It powers up now, which is far better than it was doing just after I fished it out of the pot. USB connection works, speaker phone works, etc.
However, touch screen does not. If I hold the screen at a certain angle I can see a faint outline of where water has creeped into the screen about 1/2 of the way across. Touch screen worked decently on first power up but now it does not work at all. All buttons work okay.
I am going to disassemble again after work and inspect the screen more closely. Hopefully will save me from having to replace the machine!
speckledpig said:
I am going to disassemble again after work and inspect the screen more closely. Hopefully will save me from having to replace the machine!
Click to expand...
Click to collapse
...and if its just the screen that doesnt work, thats a cheep, easy fix!
I just reassembled after cleaning again and touchscreen works.
I am going to evaluate tonight and we'll see!
Those disassembly photos were EXTREMELY helpful; thanks MUCH to whoever originally posted them.
I managed to spill an entire beer on mine, turned it off and let it dry as above,. everything worked great but the scroll wheel started to get confused as to which way i was scrolling it, cleaned as above with alcohol and no problems. Actually I have found that the scrollwheel on my tytn gets hinky every couple of months or so and have taken to cleaning it regularly, onve youget over the inital fear of opening up your baby it's a breeze.
That reminds me of my old Siemens SX1 *chuckles* i went swimming in the sea and i forgot i had it in my pocket.. after 15min i suddenly felt it.. I dashed to the shore and pulled it out of my pocket.. And it was still running! While water was dripping out!
And to be honest, i never cleaned it afterwards. i just let it dry in its current state.. but hell that SX1 has endured some hazzards, and its still working ^^
Altho a bit oldfashioned now
Anyway this is pretty offtopic i know sorry bout that
Hmmm. The keyboard doesn't work. It worked yesterday. Neither does the screen rotate when I slide.
I guess it will have to come apart again.
The connector had popped loose, or maybe I didn't connect it at all yesterday.
Anyway, works great, and the water in the backlight is noticeably less. It is drying on its own.
Fully functional 8525!! YAY!!!!!
O dropped my Atom in a mop bucket once.
Took battery out and tried to dry but was FUBAR. Sold it on eBay for $90AUD =D used that money to get a Hermes for $400AUD
ethos84 said:
Hi, dropped it in the toilet today.
Been drying it off for 7 hours in front of a heated fan. Tried to turn it on, the HTC screen comes up but it's really faint so I took the battery out straight away.
What are the chances of it working again?
Click to expand...
Click to collapse
Did you flush before dropping the phone? If not, make sure to clean out all the "brown bits"
today i was cleaning the pool, since the leather pouch only clips on and doesnt actually have lashes to put the belt through it got lose and fell into the pool, fully submerged. it took me about 20 seconds to get to it and get it back out.
as soon as i had it out i saw it restart by itself. immediately took out the battery, put it in front of the heater and had it there for about 3 hours.
turned it back on and it works just fine. everything is try.
i guess thats nice to know, lol.....seems to be very water friendly....lol
we will see how it goes the next days, there is always the option Asurion.......
Wow, amazing! Please keep us updated through-out the lifetime of this phone. I am very curious.
I would really recommend taking it apart and letting it sit out for a day or two to completely dry out. There is bound to still be some water in the phone. But it sounds like you got real lucky
distilled water
If this happened to me I would soak it in distilled water then blow out with air compressor, then repeat
bhagwan said:
If this happened to me I would soak it in distilled water then blow out with air compressor, then repeat
Click to expand...
Click to collapse
Bad idea. The phone works as is. Clearly the water didn't penetrate very far into the device. If you soak it in water,distilled or otherwise,your going to be worse off. If you had a little water inside,then your best bet is to dissasemble it,and clean the boards with 90% isopropyl alcohol and let it sit in a warm place for a few days. Do not get this on the display however,it will destroy it. (I destroyed a laptop panel once by using to much IPA on a paper towel so I speak from had experience)
the phone still works
just like a charm........everything is tested......all day long.........its amazing.....
i guess this is the first titan that can swim.......anybody got the telephone number for the guinness book??? lol....just kiddin
Good to hear. People usually over-react to dropping electronics in water. Water does not damage electronics just because its there, and that seems to be what people think. The water would have to cover a full surface area of open contacts and create a short which destroy's some component or the whole device.
Its like the peeing on the electric fence thing. You don't get shocked unless you are close enough to create a complete path for electricity to flow.
Anyway, good to hear your phone survived, but its no miracle. Its probably more due to good hardware and EMC design that sealed the components well enough.
Yeah it's usually not the submersion that damages stuff it's either shorting out or damage during the fall. A few winters ago a buddy of mine was bringing some stuff back home for winter break (college) and he forgot to take his computer out of the bed of the pickup truck. It got snowed and rained on all night long. He took it in the house and disassembeled the entire thing to let it dry. Put it back together and it fired right up...
I dropped my old 6700 in a bloody mary once, I did the same thing, took out the battery, and put it in the sun for a day it worked like a charm...the key is pulling the battery ASAP...water is "pretty much" harmless without electricity, it's when those two mix that you're gonna have trouble...
today was a horrible day...
apparently leaving your g1 in your pants while they are in the wash doesnt work so well.
does not power on
anyone have any idea what can be done to bring it back or is it most likely fried
and if it is done then does anyone want to buy it as is?
I guess this is an excuse to get a g2
*UPDATE*
I guess no G2 for me just yet.
My phone works great now. Did not do anything special. Did disassemble the phone though so I can wipe down any residue i saw on main components such as the keyboard.
My advice to anyone that has this misfortune is not to rush things. I think i turned my phone on 2 days too early but I got lucky and it did not affect my phone. I figured this out because there was a lot of visible moisture in the screen when the backlight turned on. The keyboard was not functioning correctly either.
I did leave it in rice for about 36 hours but I do not really think that did much as far as the drying process goes. Best thing to do is go to a hardware store and pick up a torx driver set(mine was $4 at Home Depot and it was 36 piece set including torx philips hex slotted and pozi) open up the phone *be careful* of course and let it air dry for 3-4 days (not absolutely necessary to take apart the entire screen but if you feel comfortable go ahead). While it was open I wiped down the main board and the keyboard. I did not take apart the screen because I just did not want to take any other risks(mostly because i knew the screen worked) even though there was moisture, I knew it would eventually dry out. But the key to all of this was patience(I know its tough to go 3-4 days without your baby).
the link for the service manual is http://mikechannon.net/PDF Manuals/HTC Dream SM (A04).pdf
Most of the time, phones can live through the washer and live. You MUST take out the battery and do NOT attempt to turn it on for atleast 48 hours, as you will likely short out the phone. Put the phone in a big bag of rice to let it soak up the water, also use a blowdryer to help dry the phone out. However, your warranty is now void, and there likely will be some remnants of water within your screen.
Yep! worst thing you can do is turn that thing on (or try) before its dry.
my g1 hasnt had a bath but other phones have (none with touch screens) and i take as much apart as possible and leave it that way till the waters gone (then like 4 more days just to me sure )
artifical drying sources reccomended (dont get too hot!!!)
I have had it in rice for about 24 hours now and its sitting on top of my dvr because it gives off a little heat so it should help the process.
just remembered that i didnt remove the sd card...
i was thinking that since it was in the washer with detergent, shouldnt i have just removed the battery and try to clean it in some type of solution...
I have read about a alcohol solutions but kind of scared and i just noticed that there is condensation around the edges of the screen
I'd say take it apart, Blow dry what you can, leave the pieces in a warm area for a couple hours, and then try putting it back together and turning it on.
anybody know how sensitive the screen is because i want to try and blow some heat on it but not sure if it will damage it
best part about handset insurance cover lost or stolen phones...hint hint
bladepbc said:
best part about handset insurance cover lost or stolen phones...hint hint
Click to expand...
Click to collapse
good point but im on att network using the g1 unlocked...
plus i rather not cheat my way out of it because this is my own fault
good news and bad news...
first of all it powers on and boots fine. Secondly the screen seems to be working perfectly (touch and all)
bad news i might have turned it on too early because screen still had noticeable water spots all over it. The keyboard also just spews random letters and commands (ie one of the letters controls the volume)
other good news 1.5 has onscreen keyboard
anyone have any advice on how to go about fixing the keyboard?
Advise for fixing the keyboard: take it apart and clean it.
ok well im taking it apart to clean it out and i see some residue but what should i use?
microfiber cloth?
cleaned out as much as i could but seems like the menu button is now acting up while the keyboard is still messed up
Aside from parts made of paper, parts with thin films (like the lcd), speakers, batteries, or fine parts that are difficult to dry, you can do a very neat job with 99% iso alcohol followed by deionized (aka distilled) water. This includes most (but not all) plastic casing, buttons, pcb boards, etc. Follow up with a hair blowdryer set on low heat (or if you have an electric heatgun, even better).
Get a semi-shallow dish, fill it with the solvent, submerge the part and scrub it lightly with a soft toothbrush. (probably don't scrub for polished surfaces like the exterior casing). Then directly rinse it under a stream of the deionized water. Finally, clean the dish out, fill it with the di water and scrub with the brush.
^ almost exactly what I did to recover a "dead" water soaked phone. Worked great, and learned a lot about how the phone is built
couldnt find 99% near by but got 91% which im assuming should work...
is it ok if i use bottled water(kirkland)?
oh and the spots on the screen are still there (light and dark areas)
thanks for the help guys
kp126 said:
couldnt find 99% near by but got 91% which im assuming should work...
is it ok if i use bottled water(kirkland)?
oh and the spots on the screen are still there (light and dark areas)
thanks for the help guys
Click to expand...
Click to collapse
I bought my 99% iso from Safeway. It comes in a 16oz container. Look for it in the medical supplies aisles. Don't use bottled spring/mineral water, as that contains... minerals. You need buy deionized (also referred to as distilled) water. Distilled water contains a significantly lower amount of mineral ion, which for the purpose of cleaning electronics would be considered contaminants.
Do the spots appear to be blotches of moisture? Perhaps there is fluid trapped between the various layers of the lcd.
ok ill go check out safeway tomorrow morning. thanks for clearing up the water thing.
it looks like its moisture because after leaving it off for about 5 or 6 more hours i saw a few spots fade a little bit.
I will take the screen apart tomorrow as well. Any special instructions on handling the screen or even cleaning it?
You might want to search for the service manual for the G1. It details a complete teardown and rebuild of the dream hardware.
some sort of a miracle just occured because my phone is not acting up at all anymore and i didnt even clean it with the alcohol solution yet.
Just woke up in the morning and turned on the phone and worked perfectly, with absolutely no problem with the keyboard(except that i think i forgot a screw and a few keys are a little loose) everything works fine.
only problem is that the screen still has what looks like condensation.
but the blotches in the screen seem to be slowly fading. Gonna pop it open right now and leave it out overnight.
thanks for the help
oh and the manual has a few mistakes in it as far as procedure goes but any person with common sense should be able to get past those
Damn, thats rough man. I dropped both my old phones in the toilet(damn you superbowl, damn you!!!)and both of them worked after taking them apart and drying them off but never really worked 100% the same...
Just a note too, those were non-touch screen phones.
Best of luck.