I´ve follow all steps from the file, and it occurs an error. ERROR 150. It tells that the ROM upgrade utility is not design for my device. It asks me to get the proper ROM upgrade. What is it means??
Related
I want to unlock my siemens sx56 when i tryed to use the xdaunlock it said unable to find rom bla bla
some one suggested me to upgrade the rom to xda 1.2 this willl solve the problem but when i downloaded the fie XDA-developers-SER-v12.exe and executed it. It said ERROR 007: NO ROM IMAGE FILE
cannot find ROM image to upgrade PC please download and try again.
Please help me .
Try downloading again.
same error
I've managed to get myself stuck up a dead end.
My device: Orange UK spv c500.
SPL: 2.00.0013
OS: None!
I upgraded to wm2005 but despite updating the reg keys posted by subliminal I couldn't install the certificate I use to ActiveSync with my Exchange Server; so I decided to downgrade.
I immediately realized my first mistake - I didn't have a backup of the old ROM on SD. Instead I downloaded one from a link in one of the forums and used psdwrite to put it on my SD card. I ran the update, but it failed and the device wouldn't start.
My next mistake was to try and re-flash the 'phone with the latest Orange UK ROM (v4.2.1.1). What I'd forgotten was that this updates the bootloader at the same time.
The flash appeared to go fine, but on restart I'm stuck in the bootloader. When I attempt to re-flash again the summary in the RUU says "Image Version:" ie no image version present.
If I was still on a v1 bootloader I'd be able to run IU_SPL+PatchedRUU again to give me an IU mode bootloader. With a v2 bootloader I can run this as many times as I want, but it won't put a lower version on.
Without an IU mode bootloader I can't "r2sd spl" to use itsme's dowload tools. Without a working OS I cant use TyphoonNBFTools to flash the SPL.
Can you think of any other solution?
If there was someway to "con" the rom update process into installing an older version of the SPL I'd be OK. Alternatively if it was possible to change the version of the SPL in SPVDEVS-SPL.nbf I could get it on.
Thanks for your help.
robhughadams said:
I've managed to get myself stuck up a dead end.
I immediately realized my first mistake - I didn't have a backup of the old ROM on SD. Instead I downloaded one from a link in one of the forums and used psdwrite to put it on my SD card. I ran the update, but it failed and the device wouldn't start.
.
Click to expand...
Click to collapse
did you tried this rom backup with your card writer i used this one with psd write and it worked download this one and try it ;-)
greets { ps let me know if this time you sucseeded ;-) }
http://rapidshare.de/files/2633600/backup.rar.rename.html
Hi guys I really need your help PLEASE,
I have only had my O2 XDA II Mini for 2 days, and I decided to upgrade the ROM early so I don't have to backup all my data before I have any (if you know what I mean).
Anyway, I went to www.seeo2.com to get the official upgrade. Clicked onto Oceania (i live in Australia), followed the instructions exactly for upgrade and downloaded the ROM upgrade. For everyones information the filename is ma_o2asia_11100_922_11100_ship.exe. Anyway, I had my device connected, had is synched up and started the upgrade process - at 11% an error appeared saying there was a RADIO ERROR and that I must restart the process.
I restarted the process, and an error came up saying ERROR 120: COUNTRY ID ERROR. And says that the ROM is not designed to be used on my device. I DOWNLOADED the Rom from the O2 website in the Australian section.
Now, my screen is stuck with SERIAL up the top and V.1.00 down the bottom when not connected to the computer, and USB up the top and V.1.00 down the bottom when plugged into the computer. The ROM upgrade continues to give me the same COUNTRY ID error.
PLEASE PLEASE HELP ME
Kindest Regards
Nick Chapple
Go to this link and scroll down to the post by Buzz Lightyear, this will sort your problem for you.
http://forum.xda-developers.com/vie...0&postorder=asc&highlight=country+id&start=25
I don't know If you got the help you wanted? But it seems that you crashed or it crashed your installation.
1. If you can restart you O2 on OS try this:
You will find the ROM on XDA FTP under MAGICIAN-Shipped_roms-o2asia_11100_922_11100_ship.exe
Then extract the .exe with winrar and open it.
to prevent crash again on radio installation try to delete or cut away the RADIO_.nbf. Start installation with ROMUpgradeUt.exe
When finished you probably have your rom and extrom upgraded and not your radio.
You can try this install with RADIO_.nbf again.
2. If you can't start your OS on O2 and you are stucked on Bootloader.
try install from SD card.
If you don't know how, you will find many posts on this forum how to do it.
I can explain to you step by step if you need it.
I downloaded the USPL file and followed all the steps, put the ROM that I wanted which was a 6.1 in the RUU folder, made an AS connection and ran the USPL. When I finished the Updater said it had failed with a Code 270 error message, but the RUU screen in the USPL said it had completed successfully. When my phone booted, I had the same ROM, same information as before I flashed it....what am I doing wrong? I am not shy about flashing my phone, I'm just missing a step or something. I removed my SIM and SD card to flash, that is correct also right? Suggestions would be appreciated because now that I have my Wing, I plan to try out many 6.1 ROMS until I find one I like. Also, can anyone tell me how I can get the latest most up to date version of Open Touch....when I click on the link it goes nowhere and ttrans says he's working on it, and then I saw another link where another person has started working on that ROM, Can you provide correct links so I can read about what's going on with that? Thanks!
Typically I have to try a few times before my ROM flashes right usually 2 or 3 tries. I get the same message too just give it another try.
Hi guys,
I wanted to return to the original W.M 6.5 in order to install new Android NAND, so I formatted my SD card, placed the image and loaded the bootloader. Unfortunately, the installation was interrupted. After that when trying to repeat the procedure bootloader says "Upgrade ROM code error Please try again" . I am trying again, but the same thing happens over and over again. I tried installing it via USB connection, but it installs 1% and gives the same error "000028002 NOT ALLOW".
Does that mean that I have bricked my phone and if not, how am I to fix that and install what I wanted to install?
Message says it all. ROM code error.
Fliashing from SD will remove HSPL so you have no CID bypass.
ROM you are flashing is not matching your devices country ID so you need to find a ROM that is correct to flash via SD or flash via USB & flash a suitable HSPL first.
Before proceeding flashing, check ROM & radios are correct for your device as too many people are bricking their devices by silly mistakes these days.
Thank you!
My phone is an Orange bought form UK. I fount the required ROM (ver. 3.14), but the same thing happens again. I tried to find the original 1.72, but it cannot be foung anywhere. Any ideas?
Flash HSPL via USB then ROM via USB
I managed to install the stock ROM, now I am going to pick a nice NAND Adnroid.
Thanks for the help, much appreciated!