hello, i was wondering if there was any way to change the amount of memory shared between storage and software ?
Actually, i've got a lot of storage memory (as i'm mainly using my Sd card to install my software), but i'm lacking some software memory to run a few of them.
I've read about the memory unlocker, is there anyway to use it to "give" the 10 MB gained to the software memory ? or any software to share memory in WM5 like it was shared in W2003 ?
thanks anyway and sorry if i missed the answer on a previous post.
Related
Hi there,
In the previous versions of Windows Mobile (e.g. 2003 and 2003SE) it was possible to "split up" the total device memory by yourself.
The available memory is devided into Storage and Program memory. If you needed more storage memory, you could simply use that switch to "steal" some of the program memory to add it to the storage.
Unfortunately Windows Mobile 5.0 is missing this switch, which - I guess - is due to the use of flash memory.
But isn't there still a way to adjust the memory allocation? E.g. by using some of your handy tools...?
Thanks in advance.
I doubt it since for WM5's new system, the actual hardware is changed. Before, storage and program memory both went into RAM, so you could freely choose how much each got. Now storage has ROM, and program memory has RAM. You can't turn ROM into RAM since they are physically different, so you can't move memory from the storage to the program memory...
I have a question which puzzles me - perhaps the knowledgeable amongst us can answer it for me.
I have 2 devices, an Orange SPV M2000 (Blue Angel) and an O2 MDA Mini S (Wizard).
When I look at the device info I see this
........................................BA......................Wizard
RAM Size.........................128MB....................64MB
Flash Size..........................32MB....................128MB
Storage Size..................43.26MB.................47.46MB
When I look at the Memory Screen, the BA has 125.77MB main memory showing 62.88MB allocated to Storage and 62.89MB allocated to Program and a slider to alter the split of memory.
When I look at the Memory on the Wizard there is no slider and it shows 44.76MB allocated to Storage and 44.01MB allocated to Program.
Whichever way I look at it I cannot seem to make sense of the figures.
Can someone explain (in simple terms) what these figures mean and why there is such a dramatic difference between the RAM and Flash sizes on these two devices?
First the major difference between Blue Angel and Wizard. Blue Angel stores everything - your programs, data, etc. in RAM. It uses this same RAM for program memory. That's why you get a slider. It's also why, if your battery runs out or your reset it, you lost all your stuff. The Wizard, on the other hand, has memory dedicated for data/settings storage that's like flash memory (so you won't lose your stuff), and different memory for the RAM.
depending on the ROM/ExtRom/Radio Stack, etc. installed there's...
128MB total ROM
of which
44MB is available for storage of applications/user files
the rest is the operating system, extrom, etc.
and
64MB total RAM
of which
49MB is available for running programs/memory
the rest of which is the PIM running in the background, the phone running in the background, the radio stack running in the background, etc. All stuff that either the OEM or Microsoft decided you wouldn't want not running.
Thanks 'Z'.
Now it all makes more sense.
Sorry to resurrect a somewhat buried thread, but I was doing my research before posting by using the search function -- not bad for a newbie, eh? -- and ran across this thread which directly addresses some questions I've been dealing with, but I'd like to throw some stuff out to see if I understand completely.
As I understand it, the Wizard has 64MB of SDRAM, and 128MB of Flash storage memory, correct? On the developer.cingular.com it says 64MB Flash ROM and 128MB SDRAM which appears to be backwards.
On the device Memory manager after a hard reset and installing the Qtek 9100 customization .cab Storage shows Free 43.75 of 47.46MB and Program shows Free 27.18 of 44.01MB.
As I understand it, "Storage" is refering to the Flash non-volatile memory, and "Program" is referring to RAM, correct?
So this means that of the 128MB of flash memory, ~80MB is hidden, including the customization .cab. Of the 64MB of flash memory, more than half is taken up by OS, radio and other things.
Do I have that right?
Now, one more thing. If I drag a 5MB file onto the device, the storage in use increases 5MB but Program isn't affected. This makes perfect sense.
Syncing, however is a different story. A small test sync of email, contacts, and calendar uses 2.68 Storage memory but 3.7MB of Program memory.
I take it from this that when you sync, it writes the pim info to the flash memory but then also automatically expands it into system memory. Do I understand that correctly?
If I am correct, is there any registry hack or anything that can change this behavior? Would it really slow things down so much if your PIM info had to be taken out of Storage memory? Or am I missing something?
Thanks for any responses.
Gene
I hope no one minds that I bump this, it's been several days.
I'm fairly sure my basic understanding of the situation is correct: contacts etc are loaded into persistent memory (ROM) then loaded into system RAM as well -- I speculate to speed searches and such because RAM is so much faster than Flash memory.
However this has a drawback in that whereas a 64MB RAM-only ppc 2003 device was able to handle >5,000 contacts with ease, on the Wizard it takes almost all of the RAM.
I know it's possible to reduce the amount of RAM (and ROM for that matter) being used by other applications but I'm wondering if anyone has explored or figured out a way to keep the PIM info in ROM (registry hack, perhaps) until it's actually needed, and what the repercussions if any were, ie did it make using the pim info unbearably slow?
I have a question here. Why doesn't HTC put more flash ROM storage (maybe 1GB of flash ROM) into its mobile phone? Then we don't need external SD memory card.
I have a question here. Why doesn't HTC put more flash ROM storage (maybe 1GB of flash ROM) into its mobile phone? Then we don't need external SD memory card.
I'm sure they'll be increasing that in upcoming models. Only reason not to, typically, is to keep cost down a bit - and let the user add as much storage memory as they want; this is under the assumption that anything put on the storage card will work just fine, which is not the case with many applications :|
Hey,
I Was wondering
If there's downside installing programs to EXT_ROM ??
It's all free on my Jasjar and I did already install several apps there.
Is there any performance issue installing to ext_rom ??
Is it the absolutly the same Read/Write/Access time speed as Main memory ??
I was thinking maybe installing frequently heavy apps to main memory will have a benefit over extended_rom installations.
Regards,
MOBILER
nobody ?
dunno about main memory verus extROM speed, but suspect they would be similar. I woudl recommend installing as many apps as possible to your storage card. I have a 4Gb fast SD card and don't notice any particular problems
It has been the same for me.I have a few programs that start with the start up after coming out of sleep mode that do not lag and boot up just fine.Seems like they carry the same speed as the applications on my main memory
Thanks.. that's what I assumed, but I'm still not sure. It would seem logical that the chips are the same and that only software makes 10mb of it hidden and called extendedrom. I just like to give speed requiring prg such as Voice Command the best possible perfomance they need.
Hi there,
I've just become what I thought was a proud owner of an Orange M600. Their May catalogue says it has 128 Mb internal memory, the website says 64Mb. When I check the memory tab, the storage total is 42.55Mb (I've used 38.53), Program total 44.01Mb (used 28.35)
I was going to replace my O2 XDA 2S (Blue Angel) which comes with 128Mb.
Having installed about 4 out of my 7 must-have programs, i'm getting sync errors for out of space. It's a gorgeous phone, but is there ANY way of getting/unlocking more on-board memory, else I guess I'll be returning it.
What have other users done to combat low memory, is it just to install everything on the SD-Card...?
Please help/advise.....
TIA
You need to think of your M600 in PC terms - that is you have a hard disk (storage) and you have RAM (program memory). The storage is just that, for storing programs and data. Program memory is where your programs run and the more memory you have the more programs you can run simultaneously.
You will most likely want to get a storage card and install your applications here thus freeing up some internal storage space. An SD card works just like your storage space, so if you felt like it you could buy a 4GB sd card and have huge amounts of storage space. So far all my applications have installed and run fine from the SD card with the exception of AvantGo, which seems to want to remain in main storage. But generally just install on the SD card.
As for memory, mine is often less than 10MB free, but Windows will close programs automatically to free up additional memory as and when needed. My advice would be to not become obsessed with the memory and just let WM5 do its job, alternatively there are a number of task managers that let you actually close programs and free up memory rather than just minimising them, however, so far for me WM5 is doing a good enough job...
Digger is right. I install everything on Storage Card except the PocketZenPhone today plug-in.
Everything works just fine.
Storage cards are getting cheaper all the time. 8)
Digger, TheBrit
Thanks for your advice. I think you've convinced me to keep the phone. I guess pretty much all other pda phones are on the market at the mo with 64Mb memory, and i do like the sleek look of the M600.
Advice much appreciated...
J
Hi everyone,
am quite new to these boards, and have only just got myself a secondhand xda IIs. In the last half a yer I have owned a HTC hermes, universal & kaiser but have finally settled on the BA because the design just suits me more. So far so good- am very happy!
I am a complete noob though and having just upgraded to WM6 from WM2003SE (following the WIKI guide & wizard) I am a bit puzzled about my phomnes' memory capacity and what goes where....
Reading over the forum I have heard how the reformating of exended rom (?) etc can increase your available storage to 128mb as part of the upgrade process. This I did with the unlocker and formatting tool. But upon upgradeing it seems I have only 64mb available for storage , but 100mb for 'programs'.... I am a bit confused. To make it worse when I load programs on the phone it actually reduces the storage capacity available rather than the 'program' memory- of which I have 75mb free that I can't seem to get at!! Can anyone please tell me what I am doing wrong or else point me in the direction of where I can educate myself about this? ....I know it is a very basic question, but am a complete novice to pdas since the last 6 months so please don't flame me!!
Thanks
Think of this in desktop computer terms.
Storage == hard drive
Program memory == RAM
explanation:
programs are installed to either storage or storage card. programs run using program memory.
hey tnx, i was looking for such info too tnx m8 for the help
Thanks! Crystal clear now!
one (or so) more quetion...
Hi- quick folow up question if anyone has the time to answer...
So I understand I have 64mb storage- but in WM2003 you could allocate how much to put to RAM & how much to put to storgae right? So therefore if I had lots of apps I wanted to load onto the phone and I needed more storage I could just reallocate. Was there not a way in the whole upgrade process to allocate less than 128mb to RAM so that I have more storage? I think I missed something here. If it is safe to have less than 128mb RAM i think I may go back and do the repartitioning thing again. Some advice would be much appreciated.
If so my question is why is it recommended to have 128mb RAM- would reducing it to less than that cause the phone to run too slow under WM6?? Is there a 'safe' guideline for minimum amount of RAM to allocate? Further clarification would be greatly appreciated! (As I see it I have lost some 'storgare' capacity this way, beecause programs excluded from the WM6 rom, eg powerpoint etc , be reloaded and so eat away at my new storage of 64mb)
I think you may have missed the point: storage is flash memory, program memory is RAM. The difference is that pre-WM5 flash memory held your vanilla system, Extended ROM, and the default (for hard reset). Everything else that you customised or installed went into RAM, which was therefore split between storage of programs and data and program memory. Remember how when your battery went flat your device lost everything? That's why, and why a backup battery was needed. WM5 and later devices do not need or have backup batteries.
Since WM5 all programs and user data are stored in flash: this can make performance slower but ensures that you survive a power failure unscathed. There are ways to get round the performance issues, compressing files with UPX saves space AND time because reading a smaller file from flash is obviously quicker, and expanding it in RAM goes very fast indeed. However I would not want to overstate the performance hit that you experience working from flash.
So this is why you have lost the ability to manage the memory split - it's nothing to worry about and indeed I am very pleased because my BA now has more program memory than my Hermes.
Hope this helps!
jbn
ssjw1000 said:
Hi- quick folow up question if anyone has the time to answer...
So I understand I have 64mb storage- but in WM2003 you could allocate how much to put to RAM & how much to put to storgae right? So therefore if I had lots of apps I wanted to load onto the phone and I needed more storage I could just reallocate. Was there not a way in the whole upgrade process to allocate less than 128mb to RAM so that I have more storage? I think I missed something here. If it is safe to have less than 128mb RAM i think I may go back and do the repartitioning thing again. Some advice would be much appreciated.
If so my question is why is it recommended to have 128mb RAM- would reducing it to less than that cause the phone to run too slow under WM6?? Is there a 'safe' guideline for minimum amount of RAM to allocate? Further clarification would be greatly appreciated! (As I see it I have lost some 'storgare' capacity this way, beecause programs excluded from the WM6 rom, eg powerpoint etc , be reloaded and so eat away at my new storage of 64mb)
Click to expand...
Click to collapse
In addition to jbn's answer above you can also use a ROM that has a RAMDISK. This takes a portion of the RAM and creates a folder that you can use as a filesystem. Many people prefer these, I do not. I use my SD card and my onboard storage and have no problems with space. If you decide to go with a RAMDISK enabled ROM beware that you will loose anything you install to that section of the filesystem if your batter and backup batter go dead. Exactly the same behavior you had with WM2003 in your BA originally.