i hate the process to connect with my bluetooth headset
Comm Manager -> Settings ->
Bluetoth Settings -> Devices ->
klick -> set as wireless stereo
gives any app to do this with one klick or one button ???
I use a set of Logitech bluetooth headphones (made for the iPod). All I need to do to connect is to push the action (play/pause) button on the headphones and two seconds later I'm paired and connected (assuming the bluetooth on my Prophet is on). It may differ depending on what headphones you are using but I'm very glad I don't have to click through all those menus like you do.
Thats fine for headset devices with A2DP, but what about a device with no buttons of note, such as the motorola dc800.
I use multiple A2DP devices, and only plan to get more (headset, car, stereo). I dream of a utility which would make this process easier.
Surur
please !!! it´s so hard find a app to do this ???
help me please anyone !!!
I would like a way to do this too.
Related
i hate the process to connect with my bluetooth headset
Comm Manager -> Settings ->
Bluetoth Settings -> Devices ->
klick -> set as wireless stereo
gives any app to do this with one klick or one button ???
What headset are you using? I have Logitech wireless stereo headset. I connect it like this:
1. Turn headset on.
2. Press button on the headset once.
3. Headset says "beep" and bluetooth audio is connected
What the button?
I have four on my Sonorix :roll:
Only three on Logitech and two of them are volume controls so it's easy
This also doesn't seem to work on my i-Phono Minis, does anyone have a small app that switches this or knows of the API call needed to get the wireless headset to kick on?
Thanks,
Jon.
It's an A2DP issue. Some headphones connect, others do not.
The HP FA303/Logitech headset is one that works. The Moto HT820 is another but has an annoying high frequency distortion. I believe the Jabra BT620 also works correctly but I haven't personally verified this.
My I-Tech S35 BT Headphone adapter
I have to go thru the same process to get a2dp wireless stereo working.
Comm Manager -> Settings ->
Bluetoth Settings -> Devices ->
klick -> set as wireless stereo
I have tried shortcuts using vijays excellent app, but end up getting the wireless headset audio instead of full blown stereo.. there must be a better solution to this..
nolodude said:
What headset are you using? I have Logitech wireless stereo headset. I connect it like this:
1. Turn headset on.
2. Press button on the headset once.
3. Headset says "beep" and bluetooth audio is connected
Click to expand...
Click to collapse
I´m using the I-Tech Blueband
and i think i had see a BT-stark to connect with one button but i don´t find it..
This issue is very likely one of the reasons why A2DP was never officially released.
i think Buzz have write a little tool to do this but it´s hard to find it on the big forum...
Sleuth255 said:
This issue is very likely one of the reasons why A2DP was never officially released.
Click to expand...
Click to collapse
That doesn't make much sense - the reason why they didn't release technology was because it took too many steps to turn on? You wouldn't remove a room from a house just because the contractor put the switch in an inconvient location...
no... the reason it wasn't ever officially released was because of inconsistent device support. Some headphones connect just fine (HP, Logitech, moto) and others don't. Some headsets sound just fine (HP, Logitech) and other's don't (Moto HT820).
Hey guys. I had a moto ht820 (or whatever) and they connected automatically when they were turned on, but crashed frequently when getting calls. Now I have BT620s (jabra) and they work nice However I do have to go and connect them (sux).
So I am posting in hopes that VJ will see this and write a quick connect for the STEREO BT headset like he wrote the other one for Hands Free.
Later; Lew
I'm experience the same problem i have a2dp on my device (mda vario) but everytime i'll have to go to bluetooth, device's, select the headset and set as wireless stereo. isn't there a way to do this automatic?
Becouse it's really bugging me. i have the jabra 620
I have been using for awhile the Moto HS850 and have been able to initiate calls (via voice command), answer calls, etc.
Not too long ago, I went and purchased a H700 (for the noise reduction). For the life of me, I couldn't get the initiate call via VC to work, and it works perfectly with the HS850!
Does anyone have any idea why I would not be able to get the H to work?
Hey guys,
is now a solution out there to connect with one button
the jabra bt620 ??
regards
zehn
My Moto works very well and connect automatic...
a2dp hack
hello guys here is a a2dp hack, just download the cab upload to your device open it fromn your device
soft reset
then discover and add your headphones(stereo)
right click and select set as wireless stereo....
uploaded to htc p4350 worked perfect for headphones plantronics stereo bluetooth
doesnt work
check this page
http://www.teksoftco.com/index.php?section=freeware
here is a2dp toggle
Hi,
Just a quick question. My Moto HT 820 also works both playing music and working as head set. Unfortunately it's mono .
For the tests I've set the wizard to connect to Moto only as wireless stereo but
it keeps playing mono
Is that my issue or general ?
I run MX6r3
cheers
Hello everybody,
I just would like to hear some (technical) comments regarding making stereo bluetooth headset usage more convenient with a device like the HTC Universal.
My current situation is as follows:
The stereo bluetooth headset that I am using is http://www.itechdynamic.com/en/products_spec.asp?cid=2&pid=02040
The inconvenient problem I am encountering is the cumbersome method of going into "wireless-stereo/hands-free/headset" mode immediately after switching ON my headset.
The pairing between the device and the headset was not an issue, however one would think that once paired - there would be no need to go into the "Partnership Settings" again, and again, and again, etc...
So assuming that the Universal device has Bluetooth ALWAYS active, I switch ON my headset and the only think that works is the Multi-Function-Button on the headset that triggers the voice dialer / voice commander. Once the phone dialer is running I conveniently go into hands-free mode. This is fine and all, but quite useless when I am not using the phone dialer.
I mean, after switching ON the headset, and then I start to play an audio file - the headset should be the point of audio output, not Universal's speakers. This does not happen after switching ON the headset. To make this happen, I must do the follwing:
1. Switch ON the headset
2. On the Universal Device, go to Comm Manager and select the Settings tab
3. Choose Bluetooth Settings...
4. Select the Devices tab
5. Select the defined Partnership between the headset and the Universal device, in my case this selection is "i.Tech Clip S"
6. Under the "Select services to use from this device" we have:
a.) Hands Free
b.) Wireless Stereo
c.) Headset
All three are selected but in reality are not working (not yet anyway..)
7. Clicking the REFRESH button causes the services selected in point 6 above to change. Clicking the REFRESH button causes the Hands Free and Wireless Stereo services to be de-selected while the Headset service to remain selected.
8. Select the Hands Free and Wireless Stereo services and click on the Save button.
9. Now all is well!
So, the problem obviously is in point 6 where what the Universal device says is not actually what is reflected in reality.
But in order to work around the problem, I must do points 7 and 8. Since I wish to make an app that does the things mentioned in points 7 and 8 - I need to know what the REFRESH button actually does.
All I know so far is that the REFRESH button does not just elicit values from the registry. It does something that results in the registry values being written. This is where I would really appreciate your comments.
qtek 9000 MS voice commander 1.6 handsfree voiceenable !
It doesn't work , but now http://www.jetwaremobile.com/index.htm I have this ?!!!
But the voice down in my pocket PC. I want that Handsfree is only "ON", not "OF" after click?...
I had a |Plantronics bluetooth headset which connected as soon as it was turned on. I now have an iTech S35 Bluetooth stereo headset. This won't automatically connect. I have to go through all the menus to select as wireless stereo and handsfree - a total of 9 taps!
Not sure if this is the fault of my device or the headset.
Anyone know how to get them to connect automatically?
happens to me too although i have different make of headsets... dunno the cause either what i do is delete the partnerships and reestablish them. I do this everytime I get the iffy behavior. so it's no big deal.
I have the same problem with my jabra BT620s headset. It connects it self as a Bluetooth handsfree and can use voice dialing, but It doesn't connect automatically as a wireless headset. I have to go to Wireless Manager and set it there...
Any way to make it automatically... or at least with a use of a simple click?
hmmm... known issue on the BT620s, however the fact that the iTech clip is also affected is new to me. Quite frankly, I'd never asked.
There are several headsets that don't have the issue, but its about 50/50.
I've been having a similar problem with Lubix NC1s (btw, had the problem on my MDA too).
Until I know a permanent fix, I've used iLauncher to place a Bluetooth icon on the System Tray, so at least I can get to the device profile in 2 clicks.
rpodos said:
I've been having a similar problem with Lubix NC1s (btw, had the problem on my MDA too).
Until I know a permanent fix, I've used iLauncher to place a Bluetooth icon on the System Tray, so at least I can get to the device profile in 2 clicks.
Click to expand...
Click to collapse
How did you get to the shortcut - I couldnt find which programme / file to select?
SHC said:
How did you get to the shortcut - I couldnt find which programme / file to select?
Click to expand...
Click to collapse
This is using iLauncher from SBSH:
Under Settings>Shortcuts you can select "* Shell Tray Tab *" as your tab, then "Add" Bluetooth from "Cpl Applets".
One click opens Bluetooth Settings, then click on Devices.
Ah Ha! Done it, Thank you.
I often wondered how you got shortcuts on the bottom tray!
thanks
With the iTech you have to press the MFB buttton (the flashy one) once it is turned on to connect it. Bloody stupid I know. I don't turn it on to watch the light flash, I turn it on to connect it to my device.
Hi-I tried this with a trinity and itech and a single press of the button just activates voice dial then disconnects. Any ideas?
Sorry just re-read, I have an R35, thought you did too. You could try the Bluetooth audio routing program from below, there's a program & a separate today screen plugin version:
http://www.trianglepowers.com/ppc6700/
Not sure if it'll work or what the quality may be like but its worth a stab.
instructions with Bluetooth X5
For those that have a Tytn and Blueant X5 (with the latest firmware)
- turn on bluetooth on tytn and the X5
- quick-press volume up and down buttons -> Done (you might have to have your bluetooth in discoverable mode -> not sure)
BTW - Blueant X5 are fantastic - I have had it for over a year; and now about 5 of my work colleagues bought them too.
daedalia said:
With the iTech you have to press the MFB buttton (the flashy one) once it is turned on to connect it. Bloody stupid I know. I don't turn it on to watch the light flash, I turn it on to connect it to my device.
Click to expand...
Click to collapse
I have an iTech S38 and it works the same with the MFB button. If it does not work for you (ie when you press it you just get voice command) then I think it's a rom issue, not the headset itself. Ie, the bluetooth stack is not recognising the request to connect from the headset.
Try A2DPToggle
http://www.teksoftco.com/index.php?section=freeware
Can also be made to work with one button press using mortscript.
Surur
Hi folks
I've got my self a pair of HP Bluetooth headphones (very nice btw!) but every time I want to use them, I have to turn on bluetooth, go into bluetooth devices, press and hold the bluetooth headphones and select "set as wireless stereo".
My question is, is there anyway of getting my phone to automatically pair with my bluetooth headphones? Rather than having to go into the bluetooth settings everytime?
Or even put a shortcut on the today page would be easier enough?
Thanks
I was having the same question, but people sais that it is not a good idea to keep your device recoverable from other devices all the time from security point of view. So, i refused from this idea
mixmasterollie said:
Hi folks
I've got my self a pair of HP Bluetooth headphones (very nice btw!) but every time I want to use them, I have to turn on bluetooth, go into bluetooth devices, press and hold the bluetooth headphones and select "set as wireless stereo".
My question is, is there anyway of getting my phone to automatically pair with my bluetooth headphones? Rather than having to go into the bluetooth settings everytime?
Or even put a shortcut on the today page would be easier enough?
Thanks
Click to expand...
Click to collapse
I found out that if you create a shortcut (.lnk) with notepad and put this in it:
23#ctlpnl cplmain.cpl,23,1
You can get right to the bluetooth devices screen. I haven't seen how to pair something automatically though. hopefully one of the bluetooth guru's here can figure that out.
Thanks Jizzay1
Start -> link -> Tap+hold -> connected
Alot better than comms manager -> bluetooth settings -> devices -> tap+hold -> connected
Maybe someone will find a way to press a link and connect straight away, but this way I can live with in the mean time
Obviously different to bluetooth headsets. I use a Nokia HDW-3 and it connects everytime, my bluetooth is not set to discoverable either
I'm not sure why you guys have to re-pair your headsets. I never have. If bluetooth and the headset are on then I can make calls through it.
icemantwilight said:
I'm not sure why you guys have to re-pair your headsets. I never have. If bluetooth and the headset are on then I can make calls through it.
Click to expand...
Click to collapse
I'm having this problem with my STEREO BT headset, and it sounds like mixmasterollie is too, but it seems like the people that don't have this problem are using normal mono headsets. Please correct me if i'm wrong.
I'll have a mono headset to test tomorrow to see if my 8125 will pair with it automatically.
As iunderstood for the phone calls my STEREO headset is pairing automatically, but not for music
Jizzay1 said:
I'm having this problem with my STEREO BT headset, and it sounds like mixmasterollie is too, but it seems like the people that don't have this problem are using normal mono headsets. Please correct me if i'm wrong.
I'll have a mono headset to test tomorrow to see if my 8125 will pair with it automatically.
Click to expand...
Click to collapse
I just tried my friend's over the ear plantronics 510 mono headset and it pairs automatically once i turned on bluetooth on my phone and on the headset. My 8125 doesn't say anything on the screen once it's been paired, but it works.
Sounds like i just have to live with manually pairing my IOGEAR stereo headset.
Try playing with the "action" button on the headset. On mine, the volume up button has a dot on it. I turn on the BT, turn on the headset, wait a couple seconds and hit the volume up button twice. It automatically goes into wireless stereo when I do that. Boy, was I happy when I discovered that!
No such luck I'm afraid, my HP BT Headphones don't auto-pair, no matter what buttons I press on the headset
I think wireless stereo and hands free act differently, whereas the hands free ones connect automatically but the headphones only option doesn't.
Shame really!
Hi! I need an help from you! Do you Know a tricks, shortcut or software that directly start up the bluetooth earphone like wireless stereo device? I each time would like play music via bluetooth must activate the bluetooth, go to comm manager, bluetooth settings, device, tap&hold on the device and tap setup wireless stereo!
Tnx
Stefano
isnt there anyone?
Well on my BlueAnt X5 buletooth stereo headset I just turn on the head set and then press the power button again and it automatically connects straight up. Maybe u have a connect button somewhere on your headset too.
Of course this is after setting up the pairing when I first bought it... and with bluetooth swithed on.