Related
Hi all !
Tried to install the software and have this error message.
Is it possible to overcome this ?
Registry hack does not work.
Allow the unsigned app from installing for everything.
HKEY_LOCAL_MACHINE\Secutiry\Policies\Policies]
Change value 0000101a from 0 to 1 Do a soft reset.
baudy.
try this file
it will then disable the 'signed' part of the installation and should therefore not give you any errors.
http://www.beyondthetech.com/downloads/phone/Cert_SPCS.CAB
l6cum said:
try this file
it will then disable the 'signed' part of the installation and should therefore not give you any errors.
http://www.beyondthetech.com/downloads/phone/Cert_SPCS.CAB
Click to expand...
Click to collapse
How to use it ? Run it once and then the cab which has problems ? Still the same result.
baudy2 said:
l6cum said:
try this file
it will then disable the 'signed' part of the installation and should therefore not give you any errors.
http://www.beyondthetech.com/downloads/phone/Cert_SPCS.CAB
Click to expand...
Click to collapse
How to use it ? Run it once and then the cab which has problems ? Still the same result.
Click to expand...
Click to collapse
ok try this one then, again transfer to phone and run it. then try the unsigned files.
l6cum said:
ok try this one then, again transfer to phone and run it. then try the unsigned files.
Click to expand...
Click to collapse
Did not help either. Still the same message....
sorry, i havent come accross anything else at the moment. if i do i will post.
l6cum said:
sorry, i havent come accross anything else at the moment. if i do i will post.
Click to expand...
Click to collapse
Thanx anyway !
If you tried the Disable Security CAB file and you're still getting that message, it's a possibility that the file was actually modified. In that particular case, you have to have the device re-signed... search for signcode here...
Disable Security CAB file unavailable
Hi, it would seem that beyondthetech has made an arrangement with his hosting company that prevents him from hosting cab files to reduce his traffic burden. Does any one have a copy of the disable security cab file as all links point to beyondthetech and no files are available from there currently
Thanks in advance
the file is on my post above and still downloads without any problems!
do you have something like this for the s620?
l6cum said:
ok try this one then, again transfer to phone and run it. then try the unsigned files.
Click to expand...
Click to collapse
Im trying to use old dictionary (16 bit American Heritage) but says access denied not digitally signed.
Sorry I found this thread with search
l6cum said:
try this file
it will then disable the 'signed' part of the installation and should therefore not give you any errors.
http://www.beyondthetech.com/downloads/phone/Cert_SPCS.CAB
Click to expand...
Click to collapse
Mate, can't download the file
How do you run this file?
Sorry
I am new with treo 750 and does not know how to run it. I have tried other programs and they have all failed to install.
Please help
Thanks
l6cum said:
ok try this one then, again transfer to phone and run it. then try the unsigned files.
Click to expand...
Click to collapse
This works on my Orange Branded HTC Touch
Not digitally signed wuth trusted certificate
thnx 4 the cab. I got same prob few days back. I just adjust the properties for cab file on my PC, clear 'unblock', transfer file again to my pda n things work. but i'm not sure of thats..maybe this cab can make work more easy n i'll try soon.
thnx bro.
l6cum said:
ok try this one then, again transfer to phone and run it. then try the unsigned files.
Click to expand...
Click to collapse
I Can't download the file. Can someone please help me?
Please follow this link:
The problem is 100% solved with Security Configuration Manager
http://forum.xda-developers.com/showthread.php?t=404170
baudy2 said:
Hi all !
Tried to install the software and have this error message.
Is it possible to overcome this ?
Registry hack does not work.
Allow the unsigned app from installing for everything.
HKEY_LOCAL_MACHINE\Secutiry\Policies\Policies]
Change value 0000101a from 0 to 1 Do a soft reset.
baudy.
Click to expand...
Click to collapse
I can't help you with your particular enquiry, but I have exactly the same device history as per your signature - give or take a couple of Symbian devices along the way. I am on the HD2 at the moment. Still love the jasjar though - terrified of the day when the battery dies on me.
rjstep3
fix!!!!!!
ok go to settings (back all your stuff up) security and factory reset ok then install the disable security signed thing and your done
SlavKor said:
Please follow this link:
The problem is 100% solved with Security Configuration Manager
http://forum.xda-developers.com/showthread.php?t=404170
Click to expand...
Click to collapse
Unfortunately it did not solve the problem: Security Configuration Manager tries to install Tool.cab on my HD2, but without any success, "Not signed application, instalation was unsuccessful"
Does anybody have solytion, how can I manually edit the registry???
"mobile registry editor" when I try to change registry key returns with error "Not Allowed"
Please e-mail: MOD EDIT: REMOVED EMAIL
Hi,
I send my first W2003SE application.
This is a free application (it's a beta version written in c#, and requires .NET CF) and is capable to detect a change in the phone owner identity via the next comprobations:
- The user can be configure a list of preferred SIM Cards
If the inserted SIM card is not any of the owner preferred sims the application send's a sms to a configured phone (including a configured text and the SIM identifier of the inserted card)
[Obviously, the application sends the message without prompt for user msessage send confirmation and not stores the sms at the outlook tray's]
[obviously, if the new user inserted sim is a prepay sim and the credit was 0, none sms is sended]
Additionally, the application show's (if configured) a balloon notification.
- The application test (if configured) the value of the Owner identity and if changed sends a sms and / or shows a notification...
Please, test and send me your comments...
regards
Also tested it for WM05?
Nadavi :?:
Hi, sounds similar to another program on this forum. What happens if the user performs a hard reset? In any event I will give it a go soon.
frigit said:
Hi, sounds similar to another program on this forum. What happens if the user performs a hard reset? In any event I will give it a go soon.
Click to expand...
Click to collapse
hello,
1) i have showed 2 threads in this forum about this problem.
one works with owner data but no with sim data, and another works with the sim, but the user is obly to store a special number at the sim ownered numbers list (i don't have tested any).
this application works with owner user data and stores the valid sim identifiers in a configuration file.
2) in my opinion, the correct usage is:
a) install the application
b) c9nfigure settings
c) copy the application and the configuration file at the rom
in this case, a hard reset is not a problem, ok ?
regards
frigit said:
Also tested it for WM05?
Click to expand...
Click to collapse
sorry,
i have a qtek s100 with w2003se...
please, test in w2005 if you have... and send me your comments...
thank's
Seems to be working on my xda2i - no slow down of unit and no lock-ups tho only second day of use.
Thank you Bartito
Sorry but doesn't work on my MDA Vario.
First I had to install OpenNet Cab and after that I got an error that it couldn't load some NotifyIcon.
I was in a hurry so I didn't check that good, I already uninstalled the program but I will sure will try a new update, the idea is real good
bartito said:
frigit said:
Hi, sounds similar to another program on this forum. What happens if the user performs a hard reset? In any event I will give it a go soon.
Click to expand...
Click to collapse
hello,
1) i have showed 2 threads in this forum about this problem.
one works with owner data but no with sim data, and another works with the sim, but the user is obly to store a special number at the sim ownered numbers list (i don't have tested any).
this application works with owner user data and stores the valid sim identifiers in a configuration file.
2) in my opinion, the correct usage is:
a) install the application
b) c9nfigure settings
c) copy the application and the configuration file at the rom
in this case, a hard reset is not a problem, ok ?
regards
Click to expand...
Click to collapse
Bartitio, could you please clarify what is required in point (c)? Where exactly do I copy the files too? I also have a Magician. Thanks Paul
c) copy the application and the configuration file at the rom
in this case, a hard reset is not a problem, ok ?
regards[/quote]
Bartitio, could you please clarify what is required in point (c)? Where exactly do I copy the files too? I also have a Magician. Thanks Paul[/quote]
Hi,
I have read more threads in this forum about the mode to make your owner rom.
Tried the software but got the following error:
"An unexpected error has occurred in SecurePocketPhone.exe
Select Quit and then restart the program, or select Details for more information"
Upon selecting details the following error message occurs:
"SecurePocketPhone.exe
TypeLoadException
Could not load type
OpenNETCF.windows.forms.notifyicon
from assembley
OpenNETCF.Windows.Forms,
Version=1.4.50804.0, Culture=neutral,
Publickey Token=30C767B29D52D6
Any ideas?? I have the opennetcf file loaded
frigit said:
Tried the software but got the following error:
"An unexpected error has occurred in SecurePocketPhone.exe
Select Quit and then restart the program, or select Details for more information"
Upon selecting details the following error message occurs:
"SecurePocketPhone.exe
TypeLoadException
Could not load type
OpenNETCF.windows.forms.notifyicon
from assembley
OpenNETCF.Windows.Forms,
Version=1.4.50804.0, Culture=neutral,
Publickey Token=30C767B29D52D6
Any ideas?? I have the opennetcf file loaded
Click to expand...
Click to collapse
I have updated the cab file with a newly version that don't need the OpenNetCF.NotifyIcon class.
Thank's
bartito said:
I have updated the cab file with a newly version that don't need the OpenNetCF.NotifyIcon class.
Click to expand...
Click to collapse
Sorry, but this doesn't work on my MDA Vario with latest Qtek Rom and OpenNET CF installed.
But maybe my problem is that I use WM5 and not WM2003
molski said:
bartito said:
I have updated the cab file with a newly version that don't need the OpenNetCF.NotifyIcon class.
Click to expand...
Click to collapse
Sorry, but this doesn't work on my MDA Vario with latest Qtek Rom and OpenNET CF installed.
But maybe my problem is that I use WM5 and not WM2003
Click to expand...
Click to collapse
Ahhh!
It's possible.
I have tested only in w2003se.
I don't have a w2005 pocket...
sorry
That's too bad....for now!
I will stay and follow this topic, would love to see this work on my Wizard.
By the way, does it stay freeware, or are you planning something like a license key, or maybe something like a free donation?
molski said:
By the way, does it stay freeware, or are you planning something like a license key, or maybe something like a free donation?
Click to expand...
Click to collapse
This project was freeware for every...
Hi Bartito, not sure if you updated your first attachment, but I downloaded it again and got the same error.
frigit said:
Hi Bartito, not sure if you updated your first attachment, but I downloaded it again and got the same error.
Click to expand...
Click to collapse
Please,
install the OpenNET CF assembly libraries (follow this link: http://www.opennetcf.org/fget.asp?file=SDF14CABs.zip&dir=/bin)
Thanks
Hi Bartito!
Thank you soooooo much for this App!
I had the same problems as frigit with the same error-message and I thought I had the right .NET CF but it didn't work. Now it is workign perfectly. Thanx for the link!
Bartito for President!!!
inquartata said:
Bartito for President!!!
Click to expand...
Click to collapse
No, no... i idore my anonymity.
please, send me any comment or bug.
thank's
inquartata said:
Hi Bartito!
Thank you soooooo much for this App!
I had the same problems as frigit with the same error-message and I thought I had the right .NET CF but it didn't work. Now it is workign perfectly. Thanx for the link!
Click to expand...
Click to collapse
Do you have a Wizard (with WM5), or some device with WM2003?
Tnx!
I removed minimo from my vario2 after finding it very sluggish. when installed it asked if I wanted to set it as default browser and I said yes. now if I click on a hyperlink in an email IE won't open it because of a security error. something about trusted. any ideas how I can get it back as I do not seem to have any sort of registry editor. had a look at all the ie settings I can find, but no joy. if I need to install one can I download one as a cab file as active sync messed my pc up! cheers in advance you ever helpful souls!
timbouk said:
I removed minimo from my vario2 after finding it very sluggish. when installed it asked if I wanted to set it as default browser and I said yes. now if I click on a hyperlink in an email IE won't open it because of a security error. something about trusted.
Click to expand...
Click to collapse
Please follow my articles: this is a very common problem under WM5 I've often elaborated on (e.g. at http://www.pocketpcmag.com/blogs/in..._the_flaky_file_associat&more=1&c=1&tb=1&pb=1 ) . It's in no way a security error: the system just doesn't find the target app.
You only need to restore the file extension assignments with for example http://www.winmobiletech.com/sekalaiset/RevertOperaAssignments.reg
Super, that looks like the exact problem. I have been looking for a registry editor that I can download as a direct cab file, I still have not found one; have you any links?
Thanks very much so far
Is that an unexpired version of windows live and messenger I can install on my WM5 MDA? I only found one over on the Hermes forum, WindowsLive.PPC_ARM_NonBETA_NoDate.zip, but the post said it will only work for Hermes. Not sure if that's true or not.
Thanks.
So I was able to find a copy of Windows Live. The problem is when I install it, and try to do a search from the today plugin I get the following message.
The file "search URL" cannot be opened. either it is not signed with a trusted certificate, or on of it's components cannot be found. You might need ot reinstall or restore this file.
It's the same error message I get with MSN.
Has T-Mo done something in their ROM with their customizations. I know before installing customizations I can use MSN. It's very strange...
There's an RGU file in t-mob's rom that has some settings in it. I personally cook mine into the ROM and put the settings in the .rgu file in OEMMISC. I'm not sure what they are though.
WizardGuy said:
So I was able to find a copy of Windows Live. The problem is when I install it, and try to do a search from the today plugin I get the following message.
The file "search URL" cannot be opened. either it is not signed with a trusted certificate, or on of it's components cannot be found. You might need ot reinstall or restore this file.
It's the same error message I get with MSN.
Has T-Mo done something in their ROM with their customizations. I know before installing customizations I can use MSN. It's very strange...
Click to expand...
Click to collapse
hey, were you able to sort out the problem with live search? got the same problem outta the blue and can't seem to find anyone with this same problem in the forums.
Error : The file "settingimprovement" cannot be opened or some of it components are missing....
I get this error, when i try to use manila settings--> personalize--> font.
this error also pops up when i try to click manila settings --> sound & display.. however, if i click ok, i can see the sound and display menu.
I get the same error, when i click setting--> data services.
Rest roms works perfectly.
resolved: issue was with corrupt packages.
moderators please close the thread.
thank you.
I am seeing the same problem in my ROM and I assumed it was a package issue or missing files. If you can let me know what was the specific corruption issue I'd appreciate it.
Andy