Hallo everyone!
I am new in the forum and new in the PDA world , my last phone that I used was Nokia 6630, and now I have Qtek 9100 , but I am still confused and hope for some help from you..
1- I was setting a ringtone for contact group, when anyone from any group calls me, I can hear a ringtone then I know that this person is from that group, is it possible to do that in my Qtek 9100 ( WM5 ) ?
2- I am using Voice Command, when I recieve a call, the woman says the number, is there any possibility to disable the Voice Command only for the recieved calls and leave it enabled for other functions ?
3- I miss some of applications that were installed in my Nokia Smartphone, like an application for changing the cm to inches or kilogramms to pounds etc.. , is there such application already installed in Wizard ? Or do I have to install it myself ? If yes, what is the name of such appliction ?
4- If I want to install an application, what is the better way, installing it in Memory card or in the Phone memory itself ? Is there any differences if I install it in MC or in the Phone itself ?
I have much more questions, but right now I am trying to figure out the rest myself..
Thanks in Advnce!
No setting for a group but you can set for each contact - in the contact fields - option for ringtone.
there is the free converterce for conversions see here http://www.freewareppc.com/calculator/converterce.shtml
Most of the time best to install to storage card to keep program memory free on the device. Although some applications like notem etc.. need to be installed on the device memory to work properly.
Thanks alot for your answer.
But what about the Microsoft Voice Command ? Can't I just disable it when I reciev a Call ? because it annoys me when the woman mentions the number, I want to disable it from that function and leave it enabled for all other functiones.
Start>Settings>Voice Command
Select Phone>Options>uncheck announce incoming calls
Thanks csterns for the answer.
new question claimed in my head.... Can I restart the phone without turning it off ? Just Restart and not turning off... Any idea how to do that ?
I appreciate any comment.
I'm not sure if you a referring to "resetting" vs "restarting". To reset the phone it does shut down and does shut down (soft reset)
To soft reset you can use this:
Or if you are not using a protective case which covers up the sides of the device then get the stylus and simply poke it in the hole just beneath the infra-red receiver on the righthand side.
Thank you all for your replies.. But I was actually meaning "Restarting" and not "resetting".
But does the "Resetting" do the same as "Restarting" does ? As much as I know, if I do the "Soft Reset" I'll loose any datas or programs that have been saved or installed before, is that right ?
And isn' there a way to only "Restart" the WM5 instead of doing a "Soft Reset" ? Like in the Windows XP for PC, if you click on "Start" then "Turn off Computer" you'll notice there is a "Restart" button.
Everything that has been mentioned so far (including the hole and the stylus) is known as a soft reset. This is exactly like restarting your Windows based PC. Nothing is lost, all your programs and data are still there. "Soft reset" is the correct terminology when talking about PDAs, not a "restart".
A hard reset is where you will lose data. A hard reset can only be performed through a combination of button presses OR by going to Start -> Settings -> System tab -> Clear Storage. Once there it will ask you to confirm you want to hard reset. There is no way you can do it accidentally unless you are really silly!
Aha, thanks Keitaro for your answer. Well that means "Restarting" in PC is the same as "Soft Reset" on PPC, what about any settings I changed, will they be back to default when I do the reset ? I mean like Volume or any settings that I changed in the WM5.
Thomas1234 said:
what about any settings I changed, will they be back to default when I do the reset ?
Click to expand...
Click to collapse
Settings such as volume etc does not get affected by a soft reset.
If you are really worried about understanding what does and does not happen during a soft reset then all you have to do is this...
1) Use your backup program to perform a FULL backup and store the image somewhere other than the device itself, eg storage card. This is only so you can be safe that you go back to where you started if goes wrong. However, I can guarantee you that nothing bad will happen so you won't even need this backup file but do for your piece of mind...
2) Make some random changes, eg volume, today theme, ringtone, documents.
3) Perform a soft reset
4) Check all the changes you just made before the soft reset and you will see that they are all the same as before - nothing has changed
5) Delete the backup because it's not needed
Actually...if you've made any recent (last 30 seconds or so) changes to the registry and then do a 'reset button' soft reset those registry changes may be lost. However this problem doesn't exist for the 'hold standby button down for 3 seconds' soft reset. However, I doubt that you are doing any registry changes right now just remember this for the future.
Cardcaptor_RLH85 said:
I doubt that you are doing any registry changes right now just remember this for the future.
Click to expand...
Click to collapse
If he's only just beginning to understand the difference between a hard and soft reset, and what each do and don't do, then he'd better hope he's not fugging about with the registry!
Thanks too much, Keitaro, for this great post.
And I appreciate Cardcaptor_RLH85's post too..
Well to be honest, I knew about "Hard Reset" and "soft reset" before, but what I was fearing is loosing datas and settings after the soft reset, I really didn't know that Restart = Soft Reset, I thought "Soft Reset is usefull when a programm hangs or a problem shows up and I never know that it is exactly the same as Restart for PC.
About Registry Edit, yes I still didn't change anything in Registry, well only 3 days is this baby in my hands.. But I have read here in this forum much about editing the Registry to solve some problems and issues, I really don't fear the editing, because I did this many times in my PC I don't think PPC is more complicated than a PC.
Thanks for you all.
Related
I am tired of the screen alingment process every time i do a hard reset.
Can it be removed?
I have the A30.09 ROM wallaby
RSU 33.02
Bootloader Ver. 5.15
I think you've never use a PDA that had a messed up alignment. Believe me, the alignment process is there for a good reason. Wihout it you can't reliably type or select items.
The process is needed because the screen touch sensor response varies from unit to unit, and this is how you can get a consistent response.
llawrence1969 said:
I am tired of the screen alingment process every time i do a hard reset.
Click to expand...
Click to collapse
Just for curiosity, why do you need this much of hard reset ?
i've bee upgrading using ROM kitchen and there is always something i don't like or use regarding the additional software hence the hard resets.
Obviously a misunderstanding -- the screen alinement i figured if removed from the startup process doesn't mean it won't be available under start settings and system when you need it and therefore would use less ROM. I believe i read that that is possible somewhere but can't remember.
Not really the screen alinement is part of the ROM removing it would mess things up big time...
Beside again why those many Hard Resets??? if you continue like that you wont need to remove the the screen alinement you will need a new device.
:?:
the screen alignment + all the usual startup cut & paste junk has been removed on previous cooked roms, so I know it can be done, and I know wut u are talkin about...after a while, those things can get very annoying
Finally!
Someone who knows what i'm talking 'bout.
The hard reset are to try different ROM installed apps after flashing a ROM kitchen. It's not that unusual in this forum...read the posts. If something happens I have copies of ROM backup on SD card, PC and all the tools necessary to get my XDA up and running.
Hi lawrence,
I'm searching too for a solution on this! If anyone knows how to remove that cut 'n paste and align screen, I would like to know that!
The reason why, is that I'm creating applications for some people that like to forget to charge... :?
After a weekend, they sometimes have a hard-reset. Now I need to create my own ROM that reinstalls those applications without that setup-screens!
Sam
I still think that the fact that you want to remove the screen alignment from the cold start process shows that you don't understand why it's there in the first place. It's not just to teach the user how to click on the screen. If the screen alignment isn't done you can end up with clicks being registered in the wrong place.
I can understand deleting the tutorial, but IMO a guy who lets his battery run down to the extent that it needs a cold boot will also not be able to figure out that he needs to go find the screen alignment program when his screen clicks get all weird on him...
the screen alinement i figured if removed from the startup process doesn't mean it won't be available under start settings and system when you need it
Click to expand...
Click to collapse
well how can you choose the screen alinement if the screen dont understand where you are pressing because of lack of alinement
OK,
Let me say that the alignment is importent, but that cut 'n paste and setting up the time-zone is something I really don't need for a good PDA-Setup...
Any suggestions?
Sam
A while ago I did think of a way to not have to align at every coldboot:
- save the alignment parameters somewhere in ROM
- have welcome.exe check for the presence of alignment data in ROM,
and use those, in stead of calling TouchCalibrate.
- if no calibration data is found in ROM, then after calling
TouchCalibrate save the data in ROM.
the calibration data is stored in the registry in this key:
[HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\TOUCH]
"CalibrationData"="507,517 150,237 153,781 866,782 861,241 "
I also noticed that the xda-2 is much better aligned without calibration than the xda-1.
samvds said:
OK,
that cut 'n paste and setting up the time-zone is something I really don't need for a good PDA-Setup...
Click to expand...
Click to collapse
I have the same problem. Sometimes when I should change SIM for some reason, I should remove battery for couple of seconds. The following occurs:
1. Device reacts as during hard reset: align, cut-n-paste, installs T-Mobile apps, soft resets, the installs something again.
2. Then I should go to SD card to start sprite backup file restoring. It asks me whether i want to restore or not, then to start or not, then restores 16 M and asks wanna soft reset or not again (stupid process).
3. I don't know why, but default today screen theme which recorded in sprite backup file is usually broken, so I need to tap Settings/Today/Spiral/OK/Default Theme/OK
4. After all I should set correct date and time hence it resets to Sep.2003.
All these steps take about 5 minutes!!!!!! And this is after TWO seconds of work without battery.
The question is: is there any way not to perform all these annoying operations when i leave XDA without main battery for some time. As I know, there is internal battery in XDA, which have enough energy to keep rom alive for this time.
Briefly, I will be happy, if XDA will do soft reset instead of hard when I change my SIM.
Anybody help please!
Just getting to grips with my new mini after putting my XDA2i to one side - and it's slow as hell.
I've found some apps can take 20 secs or more to load - and I'm using the standard apps, with no tweaks at all. It’s completely unusable so I’m assuming something s wrong otherwise everybody would be talking about this.
I'm now resetting it to the basic install (Hard reset followed by a soft reset as the customisation is about to install) – I’ll post me results later…
Some other points:
- What an amazing box - better than opening a new Mac
- Why oh why do those f*ckers as MS STILL have to put us through a noob cut & paste exercise on every reset.
- Did anybody else get the basic/business/full O2 install options promised in the quick start manual? I never saw this option on startup.
So anyway, I've got an O2 clean machine, manually configured my connections, and surprise surprise, everything is (more or less) zipping along.
It’s noticeably more sluggish that the 2i, but that’s expected – now all I need is a third part app that will allow me to assign one of the hard buttons to the light so I have a handy torch on me – anybody got any ideas?
More great news – PocketTV is now available for WM5 – www.pockettv.com
You entertain me..... I don't know why, but you do
Oooo Pocket Tv for WM5
strongp said:
So anyway, I've got an O2 clean machine, manually configured my connections, and surprise surprise, everything is (more or less) zipping along.
It’s noticeably more sluggish that the 2i, but that’s expected – now all I need is a third part app that will allow me to assign one of the hard buttons to the light so I have a handy torch on me – anybody got any ideas?
More great news – PocketTV is now available for WM5 – www.pockettv.com
Click to expand...
Click to collapse
Agree.. please, hardware button to handy torch !!!!!!
strongp said:
Just getting to grips with my new mini after putting my XDA2i to one side - and it's slow as hell.
Click to expand...
Click to collapse
I'm having the same problem.
strongp said:
I'm now resetting it to the basic install (Hard reset followed by a soft reset as the customisation is about to install) – I’ll post me results later…
Click to expand...
Click to collapse
What is it you've done? Reinstalled the OS from a non O2 ROM or something?
I'll go have a look round, which will probably answer my question.
Rolo.
Rolo,
You need to do a hard reset (see the manual) – Once you’ve got the ‘press the send key to blatt everything’ message you need to press the green phone button, but don’t worry if you get it wrong as the other buttons don’t seem to do anything. (another triumph for the O2 technical authors). Then after going through the setting up process you will be told that the O2 extensions will be loaded in 5 seconds, - before it can do this do a quick soft reset (stylus in the hole, no keys pressed).
Then you will need to set up the network settings. In programs there is an application called O2, and in that you can ‘get settings’. This may do the settings for you – it’s worth a try, as you can always reset it again afterwards if you want.
Anybody know what this program does?
Thanks for the help. I'll give that a go . I found that disabling the MSN toolbar from the today screen made quite a difference to performance as well.
I find it hard to believe anyone could put up with it as it is. Bah.
Rolo.
strongp said:
You need to
Click to expand...
Click to collapse
Cheers. Job done, and now it's so much faster. (Hard reset was different in manual to wiki so corrected).
Then you will need to set up the network settings. In programs there is an application called O2, and in that you can ‘get settings’. This may do the settings for you – it’s worth a try, as you can always reset it again afterwards if you want.
Anybody know what this program does?
Click to expand...
Click to collapse
I've just tried it. Selected the only menu item which said "Get settings". A text message popped up at the bottom saying "SMS sent", but visibly it didn't do anything else. I've waited a couple of minutes to see if I'll maybe get a message back with the settings or something, but nothing yet. My network settings are blank.
I'll give it half an hour or something and have a look and see if I can find the settings. If it's simple enough for you to point me in the direction (UK 02) that'd be cool, otherwise no worries - I presume this is for GPRS type stuff?
Thanks again for you help.
Rolo.
I was also not given the different install options on first start up. However, i did a hard reset and not by the method in the manual which didn't work - there is a 'CLEAR STORAGE' option in system settings that works instead. Then on startup i chose BASIC install and the O2 UI was not installed. So much faster now - it was ridiculous before.
The key thing is that this way, you get the speed increase and you won't need to manually input all the settings. Much better
Dr Doom said:
I was also not given the different install options on first start up. However, i did a hard reset and not by the method in the manual which didn't work
Click to expand...
Click to collapse
I used what was in the PDF manual linked to in the Wiki which was comms+voice+reset. The Wiki originally said it was camera+voice+reset.
Comms + voice + reset didn't work for me. Tried it for ages. It's important people know this in case the hard reset doesn't work for them either
Dr Doom said:
Comms + voice + reset didn't work for me. Tried it for ages. It's important people know this in case the hard reset doesn't work for them either
Click to expand...
Click to collapse
its comms & voice (hold) + quick short press with the stylus reset.
Screen will then say press green key to reset.
help!!! all expert
My dopod 838 pro hangs sometimes once per day or on alternate days. Other than tat its working fine.
Will hard reset solve the prob>?? Will hard reset damage the phone? coz as everything is working well i don wan to do hard reset tat will worsten the phone function...
Anyone? help
You can hard reset your device as many times as you wish, it won't damage your phone at all.
Just be aware that all your personal information and all programs installed by you will be erased.
In other words, it will be returned to factory defaults.
Regards,
Rayan
juninho_10 said:
help!!! all expert
My dopod 838 pro hangs sometimes once per day or on alternate days. Other than tat its working fine.
Will hard reset solve the prob>?? Will hard reset damage the phone? coz as everything is working well i don wan to do hard reset tat will worsten the phone function...
Anyone? help
Click to expand...
Click to collapse
Welcome to the board juninho, Rayan is right hard reset will not harm your device. I would not be rushing to hard reset though. A hang can be caused by many different things, but folks on this board cannot make very targeted suggestions unless they know:
when the hangs occurs
are you running any particular application,
do you have a few today plugins running,
do you fully close apps when you are not using them,
have you taken steps to stop active sync running by itself,
what apps are installed,
what mail eg push mail options do you run?
is device connected to the PC at the time it hangs,
does the hang occur at night or when on charge
does it occur when a notification or an alarm is due
etc, etc, etc
In short I'd try pinning down the cause or else a hard reset may only temporarily fix the problem until you re-create the problem again.
Cheers
Mike
PS Avoid attention grabbing thread titles and make the title as descriptive as possible. This helps people who are searching by thread title, I doubt anybody searches for the word "weird" if they are trying to get an answer to a specific question.
Thanks
oh ok thanks .
My applications are as follows:
IN PHONE MEMORY:
1) Pocket plus (cant use)
2) Spb dairy
IN MEMORY CARD:
1) Lexisgoo english dictionary
2) sprite backup(cant use)
3) transportation bus guide
4) spore map
Those cant use i just delete prog wit files left. ( I don tink i wan use registry editior)
Tot of buying spb backup - any recommanations???
hang
and forget..my phone hangs most of the tme after normal usage. The backlight went off wit the todays screen showing- then all the rest freezed
Well there are one or two things that concern me. It appears you uninstall by deleting files and not the add remove programmes facility. This can leave a messy load of unused files in the system/memory and it also makes the registry untidy/slow.
There are a couple of programmes that you say "can't run" but they are ones that should run. In fact sprite backup should be fine and is a good backup facility. (I use SPB however and find it excellent if you backup regularly and keep say most recent 5 backups + one done immediately after a hard reset. I then delete one of the oldest ones for every new one I create. I keep more than one because it's quite likely you backup thinking ebverything is working fine and then find later there's some application that used to work but you've saved after it went wrong - so you can see it's good to have a few backups going back maybe a couple of months.)
I think you have a choice here. Try to pin down what is causing the hang - could take a long time. Or go for a hard reset. In your case I fancy the hard reset because you have only a few things installed.
This may not cure your problem - in fact it lkely will not - but it will clean your system. This done you can then start doing some of the standard things listed on this forum to avoid hangs - I can pint you in the right direction if you need it.
Throughout this process take quite a few backups i.e after every installation you make. - boring I know but eventually you can reduce the number of backups you do.
Last alternative - just live with one hang a day. Soft reset does not take long. Could be very annoying though!! In normal use I think from experience that a hang once a week to two weeks is about normal!!
Mike
wow
wow thanks for e good advice!! ya think i just maual delete the prog tat don work and leave the files behind(i m afraid of deleting files tat will cause the phone harewire.
I tink i am goin to get the spb backup. I dwnloaded the trial version but cant backup everything cause tink somtin cause the hang prob. If after i do hard restart i will onli dwnload those prog which works and which i need.
i can keep my fingers crossed and see wat happens next.if it still hangs i will do a hard reset.
And any video player which i can use for dopod 838 pro to play music video to recommand?
goto
WM5_Tweaks_Performance
help
hELP....I finally did my hard reset-& dwnload essential prog - but it got worst! hang near to 3 times per day! wat shld i do>????
Right nw i got:
Phone memory- Pocket Plus
Spb diary
Card Memory- Spore digital map
Lexisgoo English dictionary
Pocket Xpdf
Spb backup
Transportation guide
Pls help
Did you take my advice and create a backup after EVERY installation you made? Indeed did you take a backup before the Hardreset?
Mike
Hi Juninho,
anyone of the apps you mentioned could be the root cause of your freeze issues.
It would be wise if you install a single app at a time and then rigourously test the stability of your device before installing another app.
I guess you might have to repeat the hard reset and start from scratch and remember take a backup after each app installation so ou can easily "roll-back" to a known current working state (this will save you future manual re-installations).
juninho_10 said:
hELP....I finally did my hard reset-& dwnload essential prog - but it got worst! hang near to 3 times per day! wat shld i do>????
Right nw i got:
Phone memory- Pocket Plus
Spb diary
Card Memory- Spore digital map
Lexisgoo English dictionary
Pocket Xpdf
Spb backup
Transportation guide
Pls help
Click to expand...
Click to collapse
?
U mean every prog b4 installation do a backup? if i do , hw am i suppose to kw if which prog cause e hang? i mean- tat means i will have to install one prog, backup- then use it for few days to see if it hangs- then dwnload next prog- and the process continues???
Thanks
right on the money...
standby
I did i hard reformat but did not do single dwnload+ backup coz all my prog quite impt to mi.
However i found out one solution. Whenever after i used my phone, i just press the standby button everytme- this solved the hang prob
Thus tink it hangs coz it got prob goin into standby mode- anyone can help?
(even if i find out which appication hangs my phone-wat can i do>? don install? pls advice)
That day i installed this software named Spedbooster by teksoft and the problem started. after a soft reset my device bacame extremely slow especially when browsing file via file explorer and the internet.. It was almost unusable....
many things i had tried to resolve this...but none had works. so i think i had to do a hard reset....so did anybody here know anyhow i can hard reset my blueaangel as my power button is damaged and no longer working... any software or resolution.. please help me..thanks..by the way i`m using wm 6.5 re7.1 by xplode
i would also say a hard reset is the best option.
you can try and perform a hard reset without the power button just reset, press camera+record and in the menu appearing set enable kitl NO, clear registry hive YES, format storage YES and confirm with the mail button. as long as you can access the menu, you are fine hard resetting without the power button. http://wiki.xda-developers.com/index.php?pagename=BlueAngel_WM5_For_Beginners
or alternatively you can try using mtty.
i cannot confirm that this works, i have not tried it, i just copied that from -=this thread=-:
type task 32
and if you get a 'level=0'
then type task 28
then task 8
Click to expand...
Click to collapse
yess!!! it worked and my device is even faster than it ever before!!! thanks for the very-very useful tip!!
does anyone know how this phone is hard-reset?
Do you mean how to hard reset......? For sure you can find in the manual......
It's same with HD
Hard reset: windows flag button: settings: security: restore factory defaults
But does anyone know how to perform a SOFT reset with the HD mini???
JohnJackson said:
does anyone know how this phone is hard-reset?
Click to expand...
Click to collapse
To perform a hard reset
1. With the phone turned off, press and hold the VOLUME UP and
VOLUME DOWN buttons, then press the POWER button shortly
and release it. You will then see a message on the screen warning
you that the operation will delete all your personal data and reset
all settings to manufacturer defaults.
2. Release the VOLUME UP and VOLUME DOWN buttons.
3. Press the VOLUME UP button to perform the hard reset, or press
any other button to cancel the reset.
and the MANUALS download page
http://www.htc.com/europe/userguide.aspx?p_id=314
Here is the cab for soft reset and power off. It working well with mine.
thx for power off and soft reset apps
Hei
Thanks for these apps. Soft Reset works fine, I've put it to "quick" apps.
Power off just switch my screen off and lock it.
Its ok to me too.
Good luck
Hi,
it's nice to have the application to make a soft reset. But what if the device freezes. Recently I've experienced it sevral times and I always had to remove battery to restart the phone. It's very uncomfortable. Any solutions for this?
Frank Caarls said:
Do you mean how to hard reset......? For sure you can find in the manual......
Click to expand...
Click to collapse
What's a manual?
Anyone found a reset button or method other than "battery out" ?
htc itself states on their website the "switch off - and on" as a soft reset. In case of a frozen device - it's battery out.
Lets face it: with the little red button the Mini would have been much more expensive
http://www.hard-reset.com/htc-hd-mini-photon-hard-reset.html
hello hatillac ,working fine cab soft reset my mini thank you
My device hangs frequently while editing contact details, or when a contact has a lot of SMS's. Haven't found a solution yet...
Laterman2 said:
My device hangs frequently while editing contact details, or when a contact has a lot of SMS's. Haven't found a solution yet...
Click to expand...
Click to collapse
Many people experience this problem. It's part of the design of HTC Sense.
I encourage you, and everybody, to write complaints about this problem in the support section of HTC website. Just as i did. It's the only way to force them to correct this problem with an update.
Laterman2 said:
My device hangs frequently while editing contact details, or when a contact has a lot of SMS's. Haven't found a solution yet...
Click to expand...
Click to collapse
why don't u use myphone for editing the contacts?
Most of the time, you'll have to edit contacts on the go. That's why it's a mobile phone.
I use pc Outlook to edit for now. But this is a serious handicap. Have to remember or write down details, and wait till i get home or to the office to power up the pc, and do the editting. Often, papers got lost. Or i forgot some details. This is really not the solution. Just a temporary method to get by.
All my older pocketpc and windows mobile phones made it very easy for me to edit contacts on the go. Never had problems with that. THis is one of the strongest points of windows mobile, despite its shortcomings on user-friendliness. What HD mini did was to kill this one very important advantage of windows mobile.
Why???
Just a small tip for frozen phones. Wait five minutes. It happens a lot that the phone is working again.
It's not supposed to be this bad. HTC is making the contacts editting of WM a laughing stock.
bart3385 said:
It's not supposed to be this bad. HTC is making the contacts editting of WM a laughing stock.
Click to expand...
Click to collapse
I've installed SPB shell on my fone- gives better user interface and does away with the HTC contacts editer- recommend to anyone, you can download 15 day trial to see if you like- be warned, you will