Related
Hi,
I have already red more forum on this question.
I have e problem trying to connect to ActiveSync by bluetooth .
When I pair my JasJar to PC not appear the service "ActiveSync", but "Serial Port".
Therefore ActiveSync, on JJ, can't connect to my PC.
I have already configure ActiveSync on PC to connect on right Com port.
Please help me, i have lost some night to try it.
had same problem,you have to get rid of all phantom bt ports there is some stuff on windows support
Thanks for reply,
How can I remove phantom bt port?
Pozzame said:
Hi,
I have already red more forum on this question.
I have e problem trying to connect to ActiveSync by bluetooth .
When I pair my JasJar to PC not appear the service "ActiveSync", but "Serial Port".
Therefore ActiveSync, on JJ, can't connect to my PC.
I have already configure ActiveSync on PC to connect on right Com port.
Please help me, i have lost some night to try it.
Click to expand...
Click to collapse
Please, can someone help me?
On my computer and Universal, I find it easy to setup BT Active Sync if I activate the setup on the Universal first using active sync app. There is an option within the active sync app to sync via BT. The computer will then recognize the device and will ask you if you want to pair it. On the other hand, if I try to pair them beginning with my computer to search for the Universal, after pairing and ticking all necessary boxes, it still won't sync.
After pairing and ticking all necessary boxes. Make sure you reset BOTH your computer and the Universal.
The problem is that when I pair my Universal to PC, not appear the service "ActiveSync", but "Serial Port".
I've already tried to delete everything and reinstall bluetooth pen, with his drivers and with windows drivers, and ActiveSync too.
I've also deleted all pairs and all port on Universal.
But I've not obtained any result.
I don't know what to make.
Can someone help me?
Please.
Nobody has had my same problem?
Any idea, please?
I had the same problem until I upgraded from Toshiba BT stack to Wildcomm BT Drivers stack (4.0.1.700).
Things I have learned:
- If UNI is connected via USB then AS service will not show in device pairing on PPC.
- You need to create an incoming COM port on PC and set AS to allow connections to this port.
raad said:
I had the same problem until I upgraded from Toshiba BT stack to Wildcomm BT Drivers stack (4.0.1.700).
Click to expand...
Click to collapse
I haven't change the bletooth stack.
Until some week it makes worked regularly, but an evening, I was configuring my Laptop to use the JJ like BT modem, when the AciveSync service has begun not to recognize more like such, but like “Serial Port”.
I've already tried to delete everything and reinstall bluetooth pen, with his drivers and with windows drivers, and ActiveSync too.
I've also deleted all pairs and all port on Universal.
But I've not obtained any result.
Yesterday, I have tried the synchronization with an other PC with a fresh installation of windows, but the result has been the same one.
Therefore the problem is on JJ, even in the registry.
I don't know what to make.
Please, can someone help me?
Up
Please help me...
Don't know if this will help and I claim no credit because this solution was written in some other threads. For the universal with a Toshiba bluetooth on your PC:
first, pair your Universal with your PC, you get "serial"
On your PC, create the following "bluetooth local com" (Control panel)
- COM7 Toshiba BT Port (COM7) LocalCOM-Server[SerialPort(TOSHIBA LOcalCOM)]
- COM6 Toshiba BT Port (COM6) LocalCOM-Client
In your activesync, allow connection to COM7
Now comes the fun part. On your universal, go to your bluetooth settings, devices, edit your device and press "Refresh", possibly more than once. Serial Port will change to ActiveSync.
It worked for me.
Eric
Also got to the control panel on PC and delete the bluetooth modem that was created. When u add a new incoming port on PC make sure it's not COM8 because that is used by JJ for USB modem connections.
same on treo 750v
I have the exact same problem on my Palm treo 750v. Searched the whole internet for a solution and found some other people with the same problem but no resolution. The only recommendation that seems to work is to do a hard-reset.
The problem started on my device after I played around with the Soft GPS port. It seems that it screwed up some COM port references for good...
I had the same problem on my notebook with Toshiba's BT drivers. I uninstalled them and connected an external USB BT which fired up the MS default BT stack.
After I completed the pairing using Bluetooth Devices (in control panel) and clicking Add in the devices tab, I used the COM Ports tab and added an incoming port and copied the number of this com port in the AS connection settings.
Now, I initiated the AS over BT from the Jasjar and it said something like "it cannot find the service or whatever and would you like to create one". I clicked yes, when it took me to the list of paired devices. From here I did what leblan has also noted "your device and press "Refresh", possibly more than once. Serial Port will change to ActiveSync." I too found that the serial port changed to ActiveSync. The key, IMHO is to hit that "Refresh" button; i.e. once your device and PC are paired and connected, going to the BT devices and editing (press & hold)the device name (the notebook or PC in this case) you will get the services which will initially say serial port, but when you click refresh, it will change to AS.
jj activesync via microsoft bluetooth stack
both from PC and JJ :
delete eventually existing pair between them;
from PC:
if there isn't create a local service COM port. I created COM8 not protected, automatic start;
from PC activesync:
remove flag both for USB and other connections;
from JJ activesync:
try to connect, it ask for pairing, reply yes;
In "mode" flag on turn on bluetooth & make this device visible;
search for new devices, when PC has discovered complete the pairing;
after paired, you can see a serial port and other PC's services;
stay there;
from PC activesync:
now turn flag on other connections setting COM8;
from JJ:
refresh and You can see that serial port begin activesync;
tip OK for close all bluetooth setting windows, You are redirected in activesync.
enjoy start to sync
15hours of crying and knocking the device. i've successfully fixed it...
i did this (credits to google)..
Delete all paired bluetooth devices from PC and from MOBILE.
CAUTION - USE IT AT YOUR OWN RISK <--- I used a registry editor for the mobile phone (google for regeditSTG2) and opened the Branch "HKLM\SOFTWARE\Microsoft\Bluetooth\ActiveSync" There might be a Key with a hex-String like this "0016cxxxxxx" --> delete it. Change the View to display the values in this Registry Branch, then delete the "LastConnected" Value and set the "Initialized" value to "0"
Turn bluetooth OFF>ON
Pair from PC
Confirm on DEVICE (dont need to select anything just enter code and press OK)
Go START->Active Sync->Connect via Bluetooth
Click to expand...
Click to collapse
Voilla worked for me..
hope this helps someone else
Hello everyone,
I need some help wth this problem.
I have installed Windows Vista RC2 on my laptop.
I've got a Belkin Bluetooth Dongle V 2.0 with EDR it uses Widcomm drivers and I've managed yto find the latest driver that work on Vista Widcomm Version 5.1.0.2500.
I've have a problem with file transfer to and from my laptop.
Evertime I try It does not find my pda.
My pda is paired with my laptop.
The service that it finds are: 1 Dial-Up Networking, 2 Obex Object Push, 3 Voice Gateway this is what it shows WSter on my laptop.
On the pda instead it find this: 1 Headset, 2 Serial port, Dialup Networking, Wireless Stereo and that all.
Should it show as well the Obex Object Push on the pda??
I've got the tick in receive all beam file in the infrared menu.
The Bluetooth is alway on.
I tryed my pda as well on my sons desktop which has the same bluetooth and it send and receives file with no problem but that users Windows XP.
Am I missing something in Microsoft Vista.
On the Laptop I can syncronise with my pda with no problem via USB using WMDC.
Do I need to download something extra for the bluetooth to work fully.
Please can anybody advice me please.
Thank You
Gigino
Hi,
I can't get sync over bluetooth to work with the WMDC in Vista.
First I established a partnership with the device using a USB cable. That worked!
Then I paired my toshiba laptop (internal bt radio) with the blueangel (ticked the ActiveSync service checkmark). That almost worked.. I entered the same passkey on both and then vista tried to add a driver for the blueangel, but never found the driver. Goes online, doesn't find it and prompts me for a CD. Does such a driver exist? I just end up with a nonfunctionning "Bluetooth Peripheral Device".
If I press on nevertheless and on the blueangel I "Connect via bluetooth" it authenticates and says "Connected", but on the laptop in WMDC it says "Connecting" for a while, then "Error".
Any help appreciated!
PS: Amazing job on getting WM6 out on this device!!
jamesjay said:
Hi,
I can't get sync over bluetooth to work with the WMDC in Vista.
First I established a partnership with the device using a USB cable. That worked!
Then I paired my toshiba laptop (internal bt radio) with the blueangel (ticked the ActiveSync service checkmark). That almost worked.. I entered the same passkey on both and then vista tried to add a driver for the blueangel, but never found the driver. Goes online, doesn't find it and prompts me for a CD. Does such a driver exist? I just end up with a nonfunctionning "Bluetooth Peripheral Device".
If I press on nevertheless and on the blueangel I "Connect via bluetooth" it authenticates and says "Connected", but on the laptop in WMDC it says "Connecting" for a while, then "Error".
Any help appreciated!
PS: Amazing job on getting WM6 out on this device!!
Click to expand...
Click to collapse
Just curious, do you have WMDC 6, or 6.1?
Wmdc 6.1.6965
works fine here with wmdc 6.1. Besure to tick to the box for activesync in bletooth profiles on your device when pairing the first time.
Canaan,
I did tick the box.. which BT stack and monitor are you using on the PC and on the device? Were you prompted to install drivers on vista at any point? Thanks!
No, i wasnt prompted to install any drivers.Never have,not even on xp pro/wm2003-2005. I'm running vista and broadcom stack. Check your in discovery mode and your com ports match on both device and desktop/laptop bluetooth settings.
Here is how it is done under vista
1.go to control panel, bluetooth devices and turn your BT discovery on
2.then turn your devices BT on and search for devices
3.after finding your pc pair it with your BA ( i use passkey 00000)
4.then the wizard will ask you which services you want to use from your pc, select activesync
5.then open activesync on BA and select from the menu "connect via bluetooth"
and thats all
requirements are that you have WMDC 6 or 6,1 with default connection options (by default BT sync is on)
Thanks for you reply. I guess I wasn't clear in my initial problem description.. the steps you outlined are exactly what I'm doing. However, when I get to step 4 and pair the device with the laptop, vista doesn't find the driver for the BA. It looks online for it and doesn't find it, so it prompts me. I don't know where that driver is and so I end up with a non-functionning "Bluetooth peripheral device" in the device manager.
I'm kind of suspecting the Toshiba proprietary bluetooth stack and monitor on the laptop at this point. I had no luck with the MS stack either. I guess I'll try to get the widcomm stack going on the laptop, sounds like it's the only one that works with the BA.
well connect your device to cradle or usb, then run windows update, it will find updates to the windows mobile device driver (here it done it twice) install it reboot and your device will be found
there is no service "activesync" after devices are paired
Hi Xplode,
I did your steps and my BA can find my pc via bluetooth...
However, when you said a list of services comes up, and choose "activesync"... it is not there...
the only 2 sevices I can choose are "wireless stereo" and "serial port".
Also, when I try my PC to find my BA, it says that "it cannot detect remote devices"
Am I doing something wrong here?
do you have WMDC installed and updates installed ?
go to your bluetooth settings of your laptop and delete the serial port created for your phone and delete your partnership. delete partnership from phone too,then re-pair them.You should see your laptop's bluetooth searching for services on your device.It should list dial-up networking,serial,handsfree and activesync.If this fails,i suggest your try and force-install widcomm/broadcom drivers.On www.parrot.fr they have instructions on how to install a microsoft bluetooth stack over the toshiba one's.the toshiba stack doesnt play nice with a lot of devices.
Xplode, yes I installed the updates... as I have read before, connect via usb and run windows update... I found 2 updates, installed them and reboot...
Maybe before I go on, jst a quick question:
is bluetooth activesync faster than usb activesync?
The point of my question would be.. I wouldnt want to go through all these hassles if at the end, bt connection is slower, cause for me it is just a nice add in function, not a requirement.....
Thanks and please answer this question for those who have done it...
Bluetooth activeync is a little slower than usb activesync but for me,its still more convenient than carrying the cradle or cable around.
USE this way.
After having connect your device once over USB to the WMDC in BT device manager in your PC add an incoming port i.e. COM3, now go to the Mobile device, turn on BT, open BT manager and in the setting under Com port tab add the same # COM port, if you can't find under COM scroll to BTS, it doesn't matter where the port number is located. Now go to WMDC click your Device icon go to Connection Setting and instead of leaving the default Bluetooth for others device scroll to the number of Com port you choose before COM3. Try to connect from device et..voila. I really would like to know why u have to guess always everything with Microsoft and paying and never being paid for my long night spent to solve their problems.
..I forgot for the further access you must start from BT manager on device --> acttyvesynch BT and click on your PC icon
to synch. If ever will not work maybe WM6 reset in your device actyvesynch to USB instead leaving BLUETOOTH, just change it.
Hope it helps somebody !
I ran into this same problem with the Toshiba BT stack on an ASUS notebook and an HTC Wizard (WM5). The solution was found in a Toshiba troubleshooting PDF.
From Control Panel, start the Bluetooth Local COM applet (installed by Toshiba BT), find the COM port labeled “LocalCOMServer[SerialPort(TOSHIBA LocalCOM)]”. Usually it's COM7.
After identifying the correct COM port, open WMDC, click “Connection Settings” under “Mobile Device Settings”, ensure "Allow Connections to one of the following:" is checked, then select the COM Port found above (again, usually COM7).
Proceed as usual and "ActiveSync" should appear instead of "Serial Port".
I'll continue the instructions for whoever might benefit:
With the computer's BT in discoverable mode, run ActiveSync on the mobile device, and tap [Menu][Connect via Bluetooth]. If there is no existing partnership, you'll be prompted to create one. Afterward (or otherwise), the computer will be checked for a running ActiveSync/WMDC process, and if all goes well, you'll see "ActiveSync" among the available services, which should obviously be checkmarked, followed by a tap on [Finish].
Now a BT link can be initiated from within ActiveSync on the mobile device, by tapping [Menu][Connect via Bluetooth] as above.
Hope this helps.
I'm trying to use my WM6 Black 8525 as either Bluetooth or USB modem. Cannot connect to my Thinkpad T60 laptop built-in Bluetooth as it only has Active Sync Bluetooth Service nor my Vista finds any devices that support PAN.
Any ideas would be helpful. Thank you in advance!
in vista do not try to get the modem over bluetooth working as pan. Do it as a dial up connection from the settings in internet explorer. On my hp I just partnered the bluetooth then went to add connection in ie. i found it with no trouble. I think it must be very dependant on the bluetooth stack on your pc. On my hp there is a process running called BTStackServer.exe that is doing it. On my dell this is not the case and it just will not work. In that case I use the wireless modem program built into the phone with a usb cable. following the instructions in help gets it to work fine.
I have also used the usb method on two xp desktops so it works just about everywhere.
With the pan, i think the problem with windows mobile devices is that they are acting in the same direction as a pc would. They are looking for a device, not acting as one. I bought a bluetooth dongle for one of my xp machines and installed the bluesolie software (stack?) and both ends showed the other as a pan device but both ends just waited for the other to expose their functionality until they timed out. i tried it with a hermes and a trinity.
i'm using ivt corporate bluesoleil and qtek 2020 wm5
can't connect via bluetooth
neeeeeeed help plz
http://www.geekzone.co.nz/content.asp?contentid=2417
i said ivt corporate bluesoleil
plz post specific directions
dont know the software you can try to look at the other guides for bluetooth they got on their site
or try the general thing with making a virtuel bluetooth comport and use that for activesync
or try to update the bluetooth software on the pc
...
Hi,
got the same problem with that ugly bluesoleil bluetooth stack; cause I'm running WM6 I had the choice of Com0-Com9, but that bluesoleil stack only delivers com-ports starting from Com11. The Windows Bluetooth stack wasn't available.
Workarounds didn't work. At last I got two correspondending COM Ports but the Connection with Activesync was disabled after a short while.
So I will buy another Bluetooth stick which uses Windows or Widcomm Bluetooth Stack.
So long
HonkBB
I succed to connect via bluetooth with WM6. I use windcomm bluetooth donggle in my PC. When I install the driver,which came with the donggle, the problem begin. I cannot connect my Hima to the PC. Then I delete the driver from windcomm and use only the driver from windows XP sp2.
1. Turn on the bluetooh from your PDA so that your pc can recognize your hima
2. explore your bluetooth connection on your pc, make your incoming port, and remember the port which automatically provide by the pc.
3. Open your active sync from your pc, open the connectio setting. Checkbox the "allow connections to one of the following" anda chose the port that you have just made in steps 2. And press ok
4. Open active sync, and from menu press connect via bluetooth. If your device haven't paired yet, then the next step to make pairing as usual
5. After you finish pairing step, you are ready to sync via bluetooth