when i checked my phone this morning....the black rubber was of the battery cover and it was stuck on the windows mobile boot screeen???
half the time my phone wont wake up when i push the power button??
any ideas???
Lol !
Sorry dont mean to laugh but are you saying your phone did this to itself ?
I've heard people syaing the rubber pad has come off before but its due to being in a pocket etc ...
As for the boot screen .. ? have you installed an old version of SPB Pocket plus, as old versions cause it to lockup before booting.
Make sure your running a rom version 2 + like the O2 rom im using, fixes loads of bugs.
fair enough mate....
well yeah the phone was on the fire place and when i woke up and went downstaires to check my phone the rubber was stucj to the phone wallet....
and then i checked phone and it was on the boot screen...
ermmm im running the latest spb pocket plus mate and ive got a factorty Tmobile rom....havent upgraded it
spb pocket plus version 3.1.1, Build 5369
you recon i should uninstall this and install ilauncher?
no thats the same version as im running, its older versions you have to worry about.
Whats the ROM version your using ?
oh guess wat mate...just as i pulled out y fone...i found it was on windows boot screen..
im deleting spb pocket plus...
oh guess wat mate...just as i pulled out y fone...i found it was on windows boot screen..
Related
after i flashed my rom A.30.09 on unlocked siemens sx56 A.20.10 running t-mobile, theres a row of blue dashes on the top of the screen now and is there no matter wat i do
i havent tried hard reset or re-flash yet
has this happened to ne one before? how can i get rid of it? thanx
Hey mate,
Asre you running Spb Pocket Plus version 2? If so, this is the battery monitor feature. You can disable it form the Settings Control Panel.
HTH's
Dave
thanx!
haha thats exactly wat i thot it was at first but i looked at it from the wrong end cuz it never went down haha. now i see that its going down from the right. thanx!
hey bro !!
i got this imate jasjar 2 years back and i love my uni allot.
need a help from you bro...i am new to all these hav been goin through 100z of threads everyday bt not gettin my answers i hope you would help me out..!!
actually my jasjar suddenly started behavin weird it switched off by itself n wen i switched it back on after the windows mobile screen shows up my jasjar gets a dead blue screen n nothin happens.
tried to connect with active sync 4.0 and 4.1 bt it would not respond and show dat the phone is not connected.
i came across a thread in which a guy said to press bright light button + power button+softreset it sent my phone to a usb mode
then i used mtty tool and its command task 28 to check if my jasjar is wasted or still breathin lucky enough it dint give a formatfaliure msg and there were some steps i followed .
everything went as told n now m stuck on where to get official wm5 for jasjar and how to get out of the usb screen and how to flash the rom...??
please help
To exit boot loader mode: http://wiki.xda-developers.com/index.php?pagename=Uni_Stuck_Bootloader
With regard to restorig WM5 - I have the official O2 XDA Exec files for their last software release. But I think you said your's is an iMate.You could see if the iMate version listed here: http://wiki.xda-developers.com/index.php?pagename=Universal_Upgrades is still available - if not maybe someone has a copy somewhere.
Hope this helps.
hey dat was gr8 bro....bt m still stuck with finding of wm5 for my imate ...!!
i found i mate upgrade bt when i clicked on download an error popped up "550 or 505 change of directory sumthin..."
well i followed the instructions u sent me it worked well bt still need to flash with wm5 ...!!
any chance of u or ur known havin a copy of wm5 rom
its been weeks and everything is gettin hazy ur help would be appriciated allot
thank you so much ..<!!
bro thankx for help i actually flashed my uni with kdskamal cooked wm5 bt my jasjar still gets dead on a greenish screen as it used to get before in blue screen wht m i supposed to do...??
Hi,
Try flashing with a WM6 rom (Tomal's ROMs are always good) and see if you get the same symptoms.
If you do then I suspect that you have a screen/cable connecting screen problem.
But lets rule out software first.
greetings bro...!!
i was up all night flashing wms
i used mtty software so many times that its commands are like hard weird in my brain cant get them out now....lolzzz
my stubborn uni was still stuck on the same dead screen but the only fun thing was that every time i flashed a new wm it used to get stuck on diff colours blue red green black...lolzzz
i scratched my head and i scratched my ass to an extent that i guess it started thinking lolzzz
i got some nice screw drivers and opened up my uni..
damn dis thing is wicked and messy it has things dat i dont know about n havnt even dreamd of in my stupidest dream i hav been lost in a computer motherboard with some good virus as my friend n some bad scary virus but in my uni motherboard i would neva..!
so i just fixed it back...n it worked for a while n den i dont know what tickled its ass.
busted again...!!
i guess ill hit the HTC service centre.
thanx allot bro
respect for ur effort and help...
Hi
for some strange reason the option "incoming com port" in the blue-tooth setting on my jasjar has disappeared. i was wondering if anyone else faced the same problem or if there is a way around it? editing registry n stuff.
because of this the previously paired devices are working fine but the new devices are unable to search the serial/com port facility on my uni.
i have tried resetting but still no luck.
any suggestions?
also i would really appreciate if someone could give me a solution for reading arabic and other such languages on uni.
(btw i am using i.e.TML 8.5 Rom and when i installed it at first the functionality was present so it cant be a ROM issue.)
...
lol... sorry abt earlier maite! i just realized the ridiculous thing i just did. i was supposed to post the reply to ur prob and then start with my sad story but somhow i managed to skip step one .
i m not expert on the device but i like it very much so i when i got one with my o2 contract i bought another one sim free just so that one would keep other company. as far as ur issue goes i have faced almost the same prob in the past and the solution was
1) rotate the screen 90 to get acess to screws at the bottom of the screen.
2) open the screws screws ... btw u might wana check if they are properly fastend before you try this step as i observed that if the screws are properly tightened this problem may solve itself... carrying on open the screws and that would detach the screen from the hinges.
3) where the hinge comes off strip open the cover a little bit and you will see two connections, one for the backlight and one for display (just like any other LCD screen.
4) press the big grip like thingee i.e. display connector with a flathead screw driver to assure they are properly in place. because in my case the connector had come off and hence was causing the system crash. although in my case the screen was only going blue after a while not the whole color palette.
just try if this one works because i m not sure if imate people are going to be any help in this case. i tried calling them a few months back for the lenscover and they said they dont support this device any more :S.
Hi, I'm having a big problem with my device, I've bought the European version and didn't touch the ROM or radio for a cool 3 months, but I often update to the latest Cookie HT, and lots of different apps. Then it got a weird behavior that if I use the device and it got a little hot it would restart by itself and after the restart got stuck on the white logo screen. It would happen often when plugged and Activesynced to my computer.
I lived with this situation for the past month but now I had enough, I've updated the radio to the latest I could find, and the ROM to Energy with Cookie HT.
Now it's worse, I can't get it to stable on the Home screen, I can see it but can't play with anything, stuck...
And BTW when it get stuck the bottom of the phone is quite hot, even if I left it for quite some time.
Edit : The Sense UI isn't loading and it actually a good bug, cause the device is running smoothly even on ActiveSync. It feels like the CHT is to blame, at least the latest one to date.
Edit 2 : Sorry, I was wrong, now it got stuck during SPB backup restoring connected to ActiveSync.
Edit 3, Sorry 2 : I've let it cool, turned it on and somehow the CHT is back and working wonderfully, this is weirder then I thought.
Edit 4 : I've managed to run Android 2.1 Desire and it was running good until it got a little warm and then froze. I'm beginning to suspect this is a hardware issue.
I realy need help feaguring this one out.
I've replaced a couple of Radio versions and this device keep jamming up, it's now unusable. I need to get it relaxed and cold before I try to turn it on again.
Can it be that the ROM is responsible ? should I go back to the stock with no mod at all (it would KILL me though).
I'm frastrated and thinking of selling the phone if anyone would buy this piece of crap.
i am in the same boat mate.
mine is going back to htc tomorrow.
In the end i removed everything and took the rom/radio back to stock still the 'heat' issue exists.
It has been like this on test for nearly two weeks if i try to run the youtube app the phone switches off anything more intense and it hard resets itself.
I have learnt that if you leave it too cool down battery out etc it will switch back on and if you do nothing but make phone calls it will be ok?
Having read alot it appears this issue happens if the device goes over a certain temp. For example folks have been moaning about the phone switching off if used in a car whilst charging running sat nav.
I advise you to contact htc as i have done.
you may have already done this, but did you do a task 29 before flashing the rom (task 29 wipes the phone and gives you a clean base to start from). Also delete the application data on your mem card(important). If your phone wont boot you can enter the bootloader by removing batt and holding vol down as soon as you you put the batt back in,This will put you onto bootloader screen ( if you have hspl installed?) from here you can do task 29 and reflash your chosen rom. Oh and make sure you have required radio for the rom you choose. hope this is of some help thought id try
Just wanted to update that HTC took an effort and accepted my unwarranted device for fixing. They replaced the board and sent it back on their expense. The device now is working flawlessly !
Thanks to HTC for a GREAT customer service and support !!!
Well i love this phone to say the least so far...unfortunately ive never been able to use the phone...
My friend who i have literally taught everything i know to about phones and computers got this X2 prototype sp2 version phone from someone in his own ways...somehow im quite sure before i got it from him he tried to change the rom on the phone himself because i saw the phone working before he "gave it" to me because it stopped working all of a sudden...
problem is...
i cant reset it...there is no clear memory selection in the rom...AT ALL....
the rom has about half of the programs as a regular 6.1 rom should and it has no SE boot screen anymore, its just a blank white screen on startup and then it goes to the black screen with the rom version and the rest of that data...I cant access the bootloader for numerous reasons and before ANYONE SAYS I SHOULD READ AND SEARCH THE THREADS, lets me first say that he gave me this phone septemember 2010...and i have never been able to access the bootloader since ive gotten it!!!!!
Any suggestions??? the only thing i havent tried yet is to call sony ericson themselves but its about to happen soon!!!!
can i get any help?
i for the first time today put all the roms well almost all of the roms for the en version of one of the roms for the x2 today on my phone hoping for some type of change but to no avail...plus i cant seem to keep the phone charged as everything is on and i cannot access any programs
Did you try to flash the phone using de SE Update Service?
btw, the Xperia X2 aint got WinMob 6.1.
Just visit the SE Page, download SEUS and follow the assistent.
LuckeY-LuckeR said:
Did you try to flash the phone using de SE Update Service?
btw, the Xperia X2 aint got WinMob 6.1.
Just visit the SE Page, download SEUS and follow the assistent.
Click to expand...
Click to collapse
yeah it doesnt allow me to get into the bootloader at all...i have the seus program but i cant get past step 2 in the process of connecting to the phone
And mines does!!! lol 6.1 exactly
and im quite sure thats the reason its having all the problems that its having, not holding a charge, speaker driver not on the phone and half of the apps i uploaded on the phone arent even visible
My HD2 with the TyphooN CM7 v3.5.4 Rom one day just frozen. Befre that its ran 2 or 3 months smootly. After when I da a soft reset I got a "white screen" (without the logo). So I did a hard reset and this time when I started the pda its show me the HTC logo just with half jellow background. Of course its stucked again in this state. I started again in bootloader mode and tryed to connect the computer. Its worked but thats day I had no time for this. So I just took the accumulator out and I put the HD2 aside. Whe I arrived back I just put back the accu and started the phone... and its ran again.
Next day the problem appeared again. The phone frozen so many different position. Showed me white screen and after the hard reset is ran but frozen the androud logo. Hardreset, run but frozen the screen lock. Hard reset and its showed me the starting HTC logo but its started to put slowly horizontal black lines and once its did a strange sound to. The long story short: I did the same rituale but this time its not worked. So I taked the contact with the store about the garantie. And started to set back the phone in the original state (wipe, factory rom back, SPL back) but I coudn't. The pda is droped me errors all the time. I cant change back even the HSPL to SPL. So I just took the accumulator out and went to sleep that day...
Next day morning was a same story. I put back the accu and the phone did everything what I want. I succesfully wiped the old memory, installed the official rom and set back the SPL. Ready to send back to the store... And I wanted to testing it but this time the pda didnt frozen. Its running.. yeah like the windows phone 6.5 usually, nothing any special (hovever the wifi bacome shorter than the android). Two days and nothing.
So I want to ask somebody because Im still think there is a hardware problem. Its can be possibel there is a harware problem and bacause the WP6.5 not use the phone as much as an Android do the problem is not appeared jet.
Or this was a software problem and I just have to start everything from the first step (I dont like the wp6.5)
There is any test program for the WP6.5 wich can be test your hardware?
Thank you for any help, and thank you to read this little bit long post.
Hey,
I'm sorry, but what's an accumulator ?
Another thing, were you running stuff on your device that made it run hotter than usual ?
Sometimes, overheating may cause unpredictable issues.
Marvlesz said:
Hey,
I'm sorry, but what's an accumulator ?
Another thing, were you running stuff on your device that made it run hotter than usual ?
Sometimes, overheating may cause unpredictable issues.
Click to expand...
Click to collapse
Oh! Thanks for the answer so much
Accumulator = Battery. Sorry for the word, english is really not my native .
I didn't feel its hotter than usual. Most of the time the phone is hotter a little bit but also when I run the official wp6.5 system.
Today I tried to put wp7 on the phone but this system still not love my SD cards (I bought a new Kingston just for this but stil no) so I tryed a new ICS rom. Its runed nice and I just think my problem solved (I started to belive there was some kind software crash) but now again frozen (when I trired to open the galery its frozen).
Maybe the problem is the overheating. I have to wait every time a few hours when I can do anything whit the machine. Now I reinstall the offical rom again again but I dont want to use the HD2 with the WP6.5 system and I still dont think this situation is naturally. Can you give me a good hint how can I test the hardware above the WP6.5?
lilalur said:
Oh! Thanks for the answer so much
Accumulator = Battery. Sorry for the word, english is really not my native .
I didn't feel its hotter than usual. Most of the time the phone is hotter a little bit but also when I run the official wp6.5 system.
Today I tried to put wp7 on the phone but this system still not love my SD cards (I bought a new Kingston just for this but stil no) so I tryed a new ICS rom. Its runed nice and I just think my problem solved (I started to belive there was some kind software crash) but now again frozen (when I trired to open the galery its frozen).
Maybe the problem is the overheating. I have to wait every time a few hours when I can do anything whit the machine. Now I reinstall the offical rom again again but I dont want to use the HD2 with the WP6.5 system and I still dont think this situation is naturally. Can you give me a good hint how can I test the hardware above the WP6.5?
Click to expand...
Click to collapse
Don't give up. And by the way, gallery crashes are ICS issues and are not being caused by your device, be happy. .
Try to run a CPU-consumer application/game and see if it overheats/reboots or freezes. Most HD games can do that, or try browsing the internet for about 30 minutes using 3G .
Marvlesz said:
Don't give up. And by the way, gallery crashes are ICS issues and are not being caused by your device, be happy. .
Try to run a CPU-consumer application/game and see if it overheats/reboots or freezes. Most HD games can do that, or try browsing the internet for about 30 minutes using 3G .
Click to expand...
Click to collapse
I put back the original rom. And the phone was totaly freezed when I entered the gallery and now cant move tought the HTC logo since a day. Its did this many time but with the android and not the wp6.5.
But now I have reason to send back. Set back the original statement was succesfull fortunetly. I know its a really good phone and I hope this issues just bacause I get a wrong one.