Related
Hi,
Does anyone knows a method for repairing my old P3300.
The problem is i've tried to upgrade to wm6 and something went wrong,
ATM i only have a screen with the Tmobile logo,
I can open the bootloader, but if i load the bootloader and try to run the official rom update i get the error 122 cannot connect to device.
If i'm in the bootloader and try to start mtty, it all goes as it is supposed to go
I can see the phone in mtty and can get it into flash mode when i enter the bootloader password.
Even when the phone is in this mode the official upgrade won't see the device.
So my question: is there a way to flash/upgrade the rom from mtty?
If yes what are the commands for it in mtty.
If not does anybody know an other solution?
Btw it's a sim unlocked and Cid unlocked P3300 From the Netherlands Tmobile.
IPL 1.13.0001
SPL 1.13.0000
GSM 02.49.90
OS 3.4.0.0
Thanks
Janus
Same here, I think we need the original T-Mobile rom.
RaZoR X said:
Same here, I think we need the original T-Mobile rom.
Click to expand...
Click to collapse
sounds like you did't run the USPL before you burned your Rom, try and do a search on this in the forum, there are plenty of fixes to get your phones up and running again.
another tip, look at the wiki and download Tmobile UK/Ger version, that should do the trick at least to get your phone running, then make sure you do the USPL before you brick it again.
neilhhardy said:
sounds like you did't run the USPL before you burned your Rom, try and do a search on this in the forum, there are plenty of fixes to get your phones up and running again.
another tip, look at the wiki and download Tmobile UK/Ger version, that should do the trick at least to get your phone running, then make sure you do the USPL before you brick it again.
Click to expand...
Click to collapse
I did ran the USPL.
I took a look @ the wiki, but I think those files (all of them are less then 100k) are theme files.
"T-Mobile_NL_MDA_Compact_III_1.13.114.1_NLD_ExtROM"
IPL: 3.13.0001
SPL: 3.13.0000
The USB is working
With the "PDA Phone ROM Update Utility 3.6.3.1." from HTC I tried to get the MDA functional again.
In the Verify the ROM you want to update window it says this:
From:
Image version: -blank-
To
Image version 3.13.405.1
But after 2% sometimes 7%, it says this: "Error [244]:Invaild model ID".
So maybe the USPL didn't went well.
At the Artemis_Upgrades section of the wiki there isn't a T-Mobile file to download. The language doesn't matter to me.
Which device are you guys trying to flash with a new ROM, if its a UK T-Mobile device its not got the WiFi hardware so don't go putting a ROM on the device that expects WiFi support, T-Mobile Artemis units from Holland did have WiFi built in as does the true HTC P3300 unit, the UK T-Mobile device does not - Mike
RaZoR X said:
I did ran the USPL.
I took a look @ the wiki, but I think those files (all of them are less then 100k) are theme files.
"T-Mobile_NL_MDA_Compact_III_1.13.114.1_NLD_ExtROM"
IPL: 3.13.0001
SPL: 3.13.0000
The USB is working
With the "PDA Phone ROM Update Utility 3.6.3.1." from HTC I tried to get the MDA functional again.
In the Verify the ROM you want to update window it says this:
From:
Image version: -blank-
To
Image version 3.13.405.1
But after 2% sometimes 7%, it says this: "Error [244]:Invaild model ID".
So maybe the USPL didn't went well.
At the Artemis_Upgrades section of the wiki there isn't a T-Mobile file to download. The language doesn't matter to me.
Click to expand...
Click to collapse
ok hear'd this one many times before, your running vista >?
try and search the forum, there is a fix for this then your phone.
@Mike it's the "Dutch" version with indeed WiFi
@Neilhhardy
No, I'm not running Windows Vista at the moment.
Me too have the same problem - flash allways stop at 2% , also can`t flash radio - stop at 73-75% - any idea?
the phone is original HTC (have Wi-Fi and not branded) - never CID locked go to bootloader without any problems but can`t flasing - I think case problem is standart HTC flasher exe - for early models have different flasher software - I have Jaf WM but Jaf WM do not support Artemis - did have released other soft that alow flashing Artemis?
P.S - I thing cause right solution is to flash your device with original version - the OEM version that was instaled by factory will fix the problem
this worked for me on a unlocked mda compact 3
format your memory card first with your pc then copy the rom file (nbh)to your memorycard and rename it to ARTEIMG.nbh
start bootloader and follow the instructions.
http://wiki.xda-developers.com/index..._Card_Flashing
rom i used http://makus.folijka.pl/OrbitO2UK.rar
I found the right solution and fix my phone stop at 2% is hapenind when the phone was flashed before cid unlock (bricked) and can be restored ONLY with ORIGINAL version for that phone
1. go to www.htc.com then go to support area and register your headset by they own htc serial number!!! this is most important step!
2. download update soft - the supportsite know what exactly is rirgt version and language for your pda
3. Flash your phone and will be alive
4. USPL and make after that what you want with your headset
TESTED and WORKED for dead phones(but phone must go to the bootloader)
I did a reset with the rec, pwrbutton and resetbutton. And now he's up and running agian with WM6 Haha
I tried to unlock the device with the AthenaUnlocker, but I got this error:
0x0, 0x100000, SPL-verify.nb
I think I killed him lol
ppl said:
I found the right solution and fix my phone stop at 2% is hapenind when the phone was flashed before cid unlock (bricked) and can be restored ONLY with ORIGINAL version for that phone
1. go to www.htc.com then go to support area and register your headset by they own htc serial number!!! this is most important step!
2. download update soft - the supportsite know what exactly is rirgt version and language for your pda
3. Flash your phone and will be alive
4. USPL and make after that what you want with your headset
TESTED and WORKED for dead phones(but phone must go to the bootloader)
Click to expand...
Click to collapse
this may had worked for you but at the HTC website I get the error that my phone is not branded. true it's a tmobile phone...
can you give me the serial number you entered? if you dont trust it you may make the last 3 digits a X
thanks
Janus
Hi, I have a TMobile MDA with IPL 2.26 and SPL 2.26 and I was trying to put a new rom but the program gave me an update error when reached 99% an now it is stuck in the boot screen (shows in the bottom USB connection) but when re-running the program it does not connect and activesync does not detect the phone. Before the rom update program ruu gave me the that said the phone required a newer program version.
Did I screwed the phone or there is a solution?
Thank you in advance for your help and best regards
Issue Was solved downloading from T-MOBILE the updated ROM and executing the program
Nick
Nope, you're good.
As long as you can enter bootloader and it reads usb in the bottom corner, your wizard can be saved. Don't worry about active sync, it won't read. Get a stock rom from your provider...if Tmo, it is available on their website. Plug in the usb and get into the tri-color boot. Run the stock ruu. Do not let anything interfere with the process, so disable your screensaver, don't let cats or kids near the usb cord, etc (trust me on that one!). NBow flash the stock rom. It will take 10 minutes roughly, be patient, DO NOT unplug usb for any reason...let it flash and reboot. Once flashed, make sure you are cid/sim unlocked...use lokiwiz (read the sticky on unlocking). You cannot change roms from stock to custom without first unlocking. If you are already unlocked, once you have the stock rom re-installed, you can flash to a custom rom. The linky in my siggy explains in detail about reviving a "bricked" wizard.
Hello!
I have strange problem with my Wizard. 4 month ago i was trying to install Pathfinder 1.2, but when I installing this ROM using ShellTool my PDA bricked. Now all the time it's frozen on Splashscreen with IPL/SPL GSM and OS information. All HR completed without any errors and all ROM's upgrading finish correctly.
Once time, after 2 months for breaking, my Wizard just started and working very well, I do 2 HR and few SR and my Wizard still working good, but when I shut it down and pull out battery my Wizard again frozen and until now can't wake up. I have CID Unlocked by imei-check. I tried to install many different ROM's, e.g. Wizard Love, Dopod (CHS), T-Mobile, Orange (PL) but nothing work. I also tried way with SD Card but my ROM's doesn't work, I think I need some working dumped ROM. I was searching help on few forum but poeple on polish forums don't know how to help me. May someone here have idea where can i find working dumped ROM or have any other idea how can i fix my Wizard?
Thanks for any help
alldoe
PS Sorry for my english
which is your device,post full data of your phone,IPL/SPL...? Make...?
As you say you installed through Shelltool,is it a G4 DOC chip version ?
You say it's stuck at the splash screen with ipl/spl and gsm version,which splash screen,is it OS (Rom) initial splash screen or a Bootloaders (Multicolored) screen ?
Secondly ,try to get it into bootloaders (multicolor) screen,if it gets into bootloaders,connect it to PC via usb cable,check small usb appears at the bottom of the bootloader mode in the phone,if it does,than flash a carrier's official Rom to recover back to it's default status.
Good luck
Try the Button's ROM (which is in Wizard Upgrading subforum). Then unlock it again (It may be causd by a fake CID unlock when you try to unlock when IPL/SPL is 2.xx)
My current
IPL/SPL 2.24
GSM 02.25.11
OS 2.24.10.1
I have G3, but I was using ShellToll because I can't install by RUU file.
My Wizard stuck at ROM Splashscreen, i can get into bootloader screen, but when I flash any ROM, everything upgrading well but after Reboot it still frozzing at Splashscreen. I was tried Button ROM sometimes but it doesn't work, I have CID unlocked by Imei-check.uk and everything is okay, I can install ROM from G3 and G4 chips. And ... I remember, that before CID Unlocking my IPL and SPL have different value.
PS. I was unlocking my CID, after my Wizard bricked.
alldoe said:
My current
IPL/SPL 2.24
GSM 02.25.11
OS 2.24.10.1
I have G3, but I was using ShellToll because I can't install by RUU file.
My Wizard stuck at ROM Splashscreen, i can get into bootloader screen, but when I flash any ROM, everything upgrading well but after Reboot it still frozzing at Splashscreen. I was tried Button ROM sometimes but it doesn't work, I have CID unlocked by Imei-check.uk and everything is okay, I can install ROM from G3 and G4 chips. And ... I remember, that before CID Unlocking my IPL and SPL have different value.
PS. I was unlocking my CID, after my Wizard bricked.
Click to expand...
Click to collapse
You can download this rom CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe on XDA,it contains IPL/SPL 1.01,and upgrad this rom,then you'll find your IPL downgrad to 1.01,and SPL still is 2.24,and then,use aWizard tu unlock your CID,after this,your CID should be unlocked,you can use RUU upgrad any rom you want.
I just do this yesterday,my CID isunlocked now.And RUU now works on my device.
luoluomeng said:
You can download this rom CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe on XDA,it contains IPL/SPL 1.01,and upgrad this rom,then you'll find your IPL downgrad to 1.01,and SPL still is 2.24,and then,use aWizard tu unlock your CID,after this,your CID should be unlocked,you can use RUU upgrad any rom you want.
I just do this yesterday,my CID isunlocked now.And RUU now works on my device.
Click to expand...
Click to collapse
Hello! I have CID unlocked. When I install Button ROM my IPL and SPL is the same (1.01). Every RUU works but It still frozen. 2 Days ago i found on other forum this advice:
INSTRUCTION :
1. miniSD - formated in PC - FAT format (now FAT32 !)
2. Wizard On and Bootloader (press reset and keep photo button let go reset) 3 color display. Put in card to Wizard.
3. Connect USB - PCC to PC
4. Launch MTTY 1.42 (my ver.) with USB connection
5. Write command - r2sd os end press enter
6. Program it will record OS on miniSD
7. After recording make Hard Reset or turn on Bootloader
8. On Display should be written - Format partition ?? (5 sec.) - to confirm press Voice dial button. If inscription it will disappear repeat point 7.
9. If Format partition successful wait OS is write. Done.
10. Draw out miniSD
11. Make Hard Reset
12. Enter in bootloader
13. FOR NON CID WIZARD - Flashing Wizard RUU (must be proper version) - ERROR 300 is bad RUU ERROR 266 turn off Wizard and turn on connect to PC
14. With CID (for example CID G4) seek forum for flashing Wizard with CID G4
My Wizard it lives
Click to expand...
Click to collapse
I was carry out all command step by step, and after flashing proper version Orange ROM my Wizard woken up, but today my Wizard get stuck again and now this way don't work, and I have to find a new method to rescue my PDA.
My Wizard woke up! I find ERA PL ROM (RUU_Prodigy_3829_382130_027111_TMO_PL_PLK_Ship) which flash excellent and working, but now I have a new problem. I can install other ROM after that but none of them work, every stucked at Splashscreen like before.I need to find some WM6 ROM which will working? Someone have some suggestion?
alldoe said:
Hello!
I have strange problem with my Wizard. 4 month ago i was trying to install Pathfinder 1.2, but when I installing this ROM using ShellTool my PDA bricked. Now all the time it's frozen on Splashscreen with IPL/SPL GSM and OS information. All HR completed without any errors and all ROM's upgrading finish correctly.
Once time, after 2 months for breaking, my Wizard just started and working very well, I do 2 HR and few SR and my Wizard still working good, but when I shut it down and pull out battery my Wizard again frozen and until now can't wake up. I have CID Unlocked by imei-check. I tried to install many different ROM's, e.g. Wizard Love, Dopod (CHS), T-Mobile, Orange (PL) but nothing work. I also tried way with SD Card but my ROM's doesn't work, I think I need some working dumped ROM. I was searching help on few forum but poeple on polish forums don't know how to help me. May someone here have idea where can i find working dumped ROM or have any other idea how can i fix my Wizard?
Thanks for any help
alldoe
PS Sorry for my english
Click to expand...
Click to collapse
i have the same proplem but i have a g4 wizard and it's not cidlocked tell me plz what to do plzzzzzzzzzzzz :'(
I unlocked a Cingular 8125 and went to load TNT Professional ROM. The phone kept losing communication at 99% and when I went to reload the original ROM from HTC's site, now I have NO O/S. I DO have another one, but my wife is using it until we get her a pink BlackJackII. I really like these phones, and can't believe I crashed this one! I don't have any Mini-SD cards. Any way to rebuild this thing?
Nobody has any ideas for me? I really need to get this phone running again!
Your not using Vista are you?
Most comm errors are due to weak or discharged battery,not having enough juice to complete the the flash,get it fully charged and try again,secondly,Yes! don't use winVista.
Download the official stock rom and flash to recover back.Get the phone in Bootloaders (RGB screen) hook up the phone and watch small usb appear at the bottom of the Bootloaders,if its there,run the rom to flash,it'll start to flash,but if small usb is not present than most probably its a comm fault.
I was using a Win2K machine. I had 2 batteries that were fully charged. I have a friend that will lend me his miniSD adapter and use my 1gig microSD card to get the info off my wife's phone and copy it to this one. He has a Sprint version of the AT&T Tilt. Might see if he wants to check out this site.
OK. I have access to a miniSD card now. Do I just take my wife's 8125, make a backup from it, then put the card in the bricked phone and load bootloader?
Read this thread for more specific instructions :-
http://forum.xda-developers.com/showthread.php?t=276963
But this method will only work if both the devices are already CID unlocked.Secondly,most important,both the devices shud be of same DOC Chip version,G3 or G4.If you back up a rom of G3 on a G4 device,it'll brick it and vice versa,make sure both the devices are of same DOC Chip version.
They are both G3's. I think they may even be from the same batch. If I unlock hers, won't I lose all her data?
YUP ! but first make a back up of all the personal data on her phone to your pc,for this use either 'PimBackup' or any similar back up application and than unlock it.Its necessary to have both phones CID unlock,otherwise,this method won't work.
OK, I used Lokiwiz 3beta and superCID unlocked the other one. When I run mtty, and use the r2sd all command, I get
R2SDBackup()-Download type=5
usTotalBlock= 1 sizeof(SDCARD_SIGNATRUE_TABLE)=512
I have left it sitting there for an hour and nothing else happens. Isn't it supposed to have several more lines of text scroll by? Also, I can't figure out how to get the dead one to boot to the miniSD.
ok,did you read the method carefully,the link I posted above ? you are getting it correctly.
This methods involves many steps.
Step 1.
Back up all the data on your wife's phone to your pc with 'PIMbackup',than downgrade to IPL/SPL 1.xx either through flashing 'Button's Rom 1.05 or you can even flash official stock rom Aku1 for this,when getting IPL/SPL 1.xx either way,apply lokiwiz02b and not lokiwiz 3beta to CID unlock your wife's phone,or you can use WST_4.2.2 tool also to CID unlock it,but its must to have IPL/SPL 1.xx to CID unlock in both the ways.Only after getting the phone CID unlocked,you can Backup the rom on a miniSD card.
Step 2.
After successfully back up of the rom on miniSD card,insert this card in your dead phone and get the phone into Bootloaders mode (RGB screen).
Step 3.
Run the MTTY command to back up from miniSD card.This is only possible if you already have this phone CID unlocked,otherwise it won't work.
Both the devices must be CID unlocked.
Although,I'm still not sure if it works,but there's no harm to try,may be it gets going.
Is the progress bar supposed to change back and forth from blue-green to red while flashing?
YUP ! it changes during flash,but it'll become green on 100% completion and the phone reboots.
OK. I can't get this thing to take the WizardLove ROM, can't find Button's ROM, but I am trying to load the XDAMiniS ROM now. On my third try and the SPL still says 2.25. Battery is fully charged and I get an immediate connection failure trying to load WizardLove. I really wish I could find the original Cingular ROM for this phone, not the new(er) update.
Download Cigular official stock rom from here :-
http://www.htcamerica.net/support/8125/software-downloads.html
or
http://download.america.htc.com/RUU_Wizard_225111_22511102_022511_CWS_WWE_Ship_1.exe
Check out this link for all the Roms like Buttons Rom T-mobile 2.26 etc
http://wiki.xda-developers.com/index.php?pagename=Wizard Windows Mobile 6 for newbies
I am just about ready to give up on this thing. No matter what I do, when I try to boot it up regular, it still keeps freezing up and when I try to do a hard reset, I get a format is failed error message.
Last ditch effort
Can I use WST to make a backup RUU from the working phone and flash that to the dead one? All other attempts have failed to restore this phone.
I dont think so
Men you are already doing everything!!!
Does you have mtty... try this please it may works for you let us know what happend please...
http://forum.xda-developers.com/showthread.php?t=420785 the man in this thread stucks on splash screen so read just the mtty steps.
BTW does you unlock your wife's phone... is yours unlocked too? before do it...please respond.
The hope dies at the end!!!!! we have so much to´pics about this issue... why you are runing windows 2000? nad make upgrades? or does I missunderstood? extremely recomended Win XP.
I have Vista at home, and I read where many people here say that you can't do reflashes with Vista, so I use my computer at work, which runs Win2K. I haven't unlocked the second phone, but I thought that I did the first one. That was why I went to flash it. I wonder if the unlock didn't take and that put me in this predicament.
I understand now
Maybe a mistake using windows milenium or 2000 or whatever...
So if it say format failed i cant imagine other thing that do the thing i post you... so if you got questions about clear DOC Chip ask everything...
when you already get everything in a XP machine tell us please oh just for a recomendation unplug the minisd and during the process the mtty working on some lines dont launch programs check your USB cable maybe with a little scratch and moving makes a false contact at all.
First of all I am so sorry to bother you all!!!, as I can see from 3 days of non stop reading here and e;sewhere, its not always liked to ask questions, but I am sorry I really need help!
I bought a 8125 cingular from eBay (bought a x01ht but it hasnt arrived)
I have read seriously so much I am now confused! But I have tried to research this 100%
when I got the phone yesterday, I first sim unlocked it with the "All HTC" unlocker.. then I used unlock ext rom wizard, and Likiwiz02 for the cid.. I did see it say "your phone is superCID" unlocked or what ever...
I then tried to flash with x2h_wm 6.5 and it went through the steps like it should and finished and said your rom is updated, BUT when the phone rebooted, it was like it went DOWN not up.. I lost alot of things and now it said G not E for network, I had less signal, and had the roaming Icon. Well, after that My XP computer would no longer recognize the device.. I would plug it in and it would charge, and the active sync tries to connect but after a few minutes it says it can not connect.
I am able to "sometimes" connect top my Vista" device, BUT I have not yet mastered being able to flash a rom with Vista... as I always get RUU is closing, because of error.. and it leaves my phone in bootloader RUU mode, so i have to reset it. I have tried the instructions here http://forum.xda-developers.com/showthread.php?t=291723 and One time I was able to get pretty far without an errors from RUU, but it said I needed a newer version.. or something, and after that I am unable to do it do any RUU on vista, although most of the time I can get it to connect by going to the services- and restarting wm 2003 thing"
This is the details of my device (and yes I know is a G3)
IPL & SPL :2.25
gsn: 02.25.11
os: 2.25.11.1
Ext Rom: 2.25.11.102
Radio: 02.25.11
Rom 2.25.11.1 WWE (build 14928.2.2.0)
protocol ver: 4.1.13.12
My question is.. What am I doing wrong? How can I get either XP to connect, or Vista to run RUU?
Can I flash by sd card.. ( I have seen both yes and no, and am confused on how to do it)
Tweeks I have done is installed a cab to remove roaming icon, reg. changed the G to E for Edge... Speed it up bu changing mem. and I think that's pretty much it!
Scream at me and call me stupid, BUT Please help me.. There are 10000000000000 different HOW TO all over the place, and all are different, and I really just would like a little PERSONAL help from someone..
THANK YOU SO MUCH!!!!!!
Tony
Also.. On the Activesync issue.. I have uninstalled and delete all tracers on my xp laptop and reinstalled both the newest version , and when it did the same, I uninstalled and reinstalled an older version... Still the same!
http://wiki.xda-developers.com/index.php?pagename=HTC_Wizard
best thing is to start with reading the wiki
Read it over and over...
I am not just saying it when I say I have searched and searched!
UPDATE
Although I received no answers, I thought I would upddate... I am so embarrassed, as the active sync was an easy fix.. (disable Firewall) I cannot believe it is that simple, as it was working fine before with firewall..
Ok I am following the instructions now flashing with XP button rom, etc etc.. Will follow up later!
Ok progress!
Well, I was able to flash to phone to button rom, and then CID unlock it with lokiwiz, but My IPL and SPL are different. SO i flashed button rom again, and its still the same... Can I go ahead and flash back up, or what do I need to do?
IPL 1.01
SPL 2.25
tlbaker78 said:
Well, I was able to flash to phone to button rom, and then CID unlock it with lokiwiz, but My IPL and SPL are different. SO i flashed button rom again, and its still the same... Can I go ahead and flash back up, or what do I need to do?
IPL 1.01
SPL 2.25
Click to expand...
Click to collapse
If all was successful your good to go.
And yes you can flash back up.
I am so ANGRY... I got to 100 % and my cat hit the cable and Now its stuck in RUU... I am looking for a fix.. ANY HELP PLEASE?
OK... got it going again... flashing back down to button, the only one that would connect.. and I will build my way back up...
Sorry for posting so much.. and thanks for the help!
I have flashed to T mobile 2.26.10.2 , IPL/SDL are both 3.08 And I have tried several times to go beyond WM5.0 but It never loads.. Any advice...
Thanks
Connect the phone to the PC and run Wizard Service Tool and press Enab. RAPI + Unsigned Apps button.
Then press CID Actions Button and Read CID block, this will tell you if your CID unlocked.
Well, I will try that, BUT I am assuming since I have a Tmobile ROM on a ATT phone its no longer unlocked???
When I ran the unlocker it said it was now SuperCID unlocked or whatever..
I will do the Service tools and see.. and Post back soon! THANKS
It is locked!
OK.. I ran the tools and it said it was CID locked... this was the results (not sure if usefull or not)
Checksum : fb67d2a2
CID: WIZCNG01
Its funny because when I ran the other lokiwiz it said it was unlocked..
I tried to unlock it and it said downgrade SPL to 1.06 or less.. AND thats the problem... When I Loaded Button rom the 4 different times I have had to flash it.. THE SPL never changes down.. One time I flashed it, I repeated it 3 times as per some instructions i seen that if you flash it again it will change.. NOPE did not change, the IPL always changes, BUT SPL stays the same.. SO If I flash again, this is the results SPL 3.08 IPL 1.01
Can anyone help me .. maybe use a diffrent rom instead of button?
HELP PLEASE!
THANKS
Have you tried to go back to the original ROM?
Problem solved
I am still tinkering, and adding patches now... BUT I was able to get wm6.5 (VERY SLOW ON MY WIZARD) so I went back to button rom, and installed XDA Mobile 6 Release 5 ROM, and I LOVE IT!!! like I said I am still adding stuff and playing with it, but so far its better than WM6 I have on my Cheetah (treo750)...
I will add the steps I took , and trial and error steps, so other people that are impatient and ask questions like I did, will know what to do.,.. BUT let me play with my new toy for a while!!!
One question.. Should I stay with IPL/SPL 2.26? Or should I go back up to 3.08 or ?????
Thanks