Related
I was looking to buy a memory card for my jas-jar and was surprised by this page on Kingston's site which says that it only supports 1GB maximum memory. Does anyone have a 2GB card here, anyone used it with their universal?
Kingston
I am using a 2Gb card no problems at all
could you tell me the company and other details of the SD card model etc?
I have a 150X 2GB ADATA SD CARD and works perfectly!! installed in an i-mate JASJAR. I bought it on ebay.
Same here, I am using a 2GB Sandisk Ultra (Black color) and no problems.
I'm Using 2GB Kingston ultimate X120 with no problem at all
Mine is 1 120x "hyper speed", "MAGU" brand card - works fine
I've read it working with a 4GB card also, worth googling to make sure.
Think I'll make that my next card if so, end of Jan.
On that point, it's ridiculous to think that my first hard drive was a massive 40MEGABYTE one in a 386 Amstrad.... here we are with something a hundred times that, the size of a postage stamp.
Madness, but GOOD madness....
My first SD card is a transcend 4GB card but I encountered problems with it. I can store and run applications normally on the 4GB card, but the camera application can't use the card as a means of storage. Thus off it went back for return. I bought the San Disk 2GB Ultra instead and never had any problems.
I can also confirm a working 2GB Ridata 150x SD working ok on my jasjar.
Had to reformat it on a pc the first time, tough, because straigth from the packaging, i only read 1gb capacity in the jasjar.
After formating, all's well!
Still, i didn't saw almost any speed increase...
I know that the device itself probably doesnt get to the top speed of the card, but...
Anyone else could post their toughts on what (if any) speed increases they had on their devices, as well as the cards brands and sizes?
4gb
mine's working fine with a 4gb transmedia card
With my JAMin in the post and I sold my 1GB SD with my JAM what is the maxium I can get and work?
I really want a 4GB can I do this?
Thanks
Yes I can confirm that the 4 gig card will work. Mine is a transcend brand and It works well.
Mike
A 2GB SimpleTech card works well on mine as well. This same card did not work on the Magician.
just to add to the list the a-data 4gb mmc plus works first time in the JAMin.
rkde said:
just to add to the list the a-data 4gb mmc plus works first time in the JAMin.
Click to expand...
Click to collapse
Thank you, thank you! I've just got one from eBay and wasn't sure about cpmpatability until I was your post!
rkde said:
just to add to the list the a-data 4gb mmc plus works first time in the JAMin.
Click to expand...
Click to collapse
I have this card and the camera application will not write to the 4GB SD card. Everything else I’ve tried on the JAMin and the 4GB SD card is fine. I had a 1GB SD that worked with the JAMin camera application but the 4GB SD does not. Looking for a fix, I’m going to try stopping the extended ROM from loading but I’ve never done that and I have not loaded anything or hacked the JAMin in any way.
i'm using a San Disk 1GB works excellent. I would suggest you try the 2 Gb one (if that's enough for u )
Hi Tanquen.
Your problem can be fixed by filling up your 4GB SD card with files (such as MP3 songs) till it has <2GB left. Then the camera software can write to the SD card. It looks like there is a bug in the camera software that it can't work if SD card has more than 2GB space.
Try it.
I have problem with Transcend 2Gb x150 SDcard on my new Qtek S200. It loosing connection with SD when reading or writing a lot big files. Looks like this card too fast for S200.
Hello
do you guys know if a 4 GB SD Card will work with the Universal. I saw in one of the signatures that people are using 2GB SD Cards, was wondering what is the upper limit?
I have an AData 4GB card purchased from some dodgy geezer in Hong Kong via eBay - it works perfectly. So go ahead and get yourself one
I've got transcend 4GB SD 150x works good
I've got a MyFlash 4GB card,
works perfectly
sl9 said:
I have an AData 4GB card purchased from some dodgy geezer in Hong Kong via eBay - it works perfectly. So go ahead and get yourself one
Click to expand...
Click to collapse
Me too
noname 'My Flash' 4GB 200x turbo MMCplus works too.
phsnake said:
I've got transcend 4GB SD 150x works good
Click to expand...
Click to collapse
same here.
not good
I will works fine but after you rich the maximum data with combination of software, you can encounter slow moving of any application hanging more often than usual and it will eat your battery 4x faster than normal consumption. :?
The speed of the card doesnt make much of a difference when using the it in the PPC. But you will notice the 150x SD card in a card reader for on the computer. Speeds of read and and write will be really fast, but it has no effect on PPC speeds, the PPC can only go so fast.
iv got a 150x transcend in mine working fine, well iv used it for about 4 months now, it does however have some slight issues with the camera...
before you can save images direct to the card you must have less than 2GB of space left on the card as the camera prog does not recognise anything more than 2gig, so if you try an take a pic with an empty 4gig card it will fail (unless you set images to save direct onto phone)
1 other problem i have encountered, i dont know whethere this was down to the camera, the phone or the card but, when i was away on holiday, i had around 2.5gb of audio and was using the camera a fair bit on my travells, then 1 day when i took a pic it overwrote (is that a word?) :lol: everything on my card!!! when i went into my storage space it said that the card still had 3gb taken up on card but when i went onto file explorer there would be nothing left showing on the card other than images i had taken since :roll: bit of a pain in the ass but it hasnt done me any wrong since then, still filling it with lots of audio/txt/images and no more problems (touch wood)
i had this experience with a 1GB sandisk card. I think it happens when a read or write to the SD card fails or doesn't finish [not sure here], happened twice the 1st instance I was able to use the SD card again [reformatted it with a camera, then again using Resco Explorer on the PPC] the 2nd time it happened the card was dead. Right now I am using a 1GB miniSD [in the adapter of course] which I bought for my ex-PPC [a Wizard] I plan to get a 4Gb SD card as well. If the speed of the card is only really noticeable with card readers then I'm ok with that [as I transfer songs and such via my notebook's in built card reader]. Hmm time to go SD card hunting over the weekend!!! Wonder what I'll do with the miniSD though... I have a 1Gb card in my digicam as well, maybe I can pass that off to my lil sis or something... :roll:
Ive just bought "Platinum" 4GB. It cost me 82$, here in Poland.
Universal report it have just 3,56GB but it is working as expected. Ive benchhmarked it in pocket mechanic - index:122
best reg,
Piotr
I got a Transcend 4Gb 150x SD Card [Part No.: TS4GSD150]. For around 88USD. It is reported as 3.86Gb under Resco Explorer.
I bought a MobyMemory 4Gb card from, suprise suprise, www.mobymemory.co.uk. Almost certainly rebadged from somewhere else but I though it was a good price at under £50 and works fine on my XDA Exec. They also throw in a free SD reader as some readers have trouble with 4Gb SD cards. I had to reformat the SD card under Windows XP for it to be seen by both the Exec and Win XP (as shipped, only the Exec could read the card).
Have the wiki and tomeraider on there - great for being a smartarse down the pub.
sl9 said:
I have an AData 4GB card purchased from some dodgy geezer in Hong Kong via eBay - it works perfectly. So go ahead and get yourself one
Click to expand...
Click to collapse
I've just ordered one for a total of 37 quid
Hi guys,I am new here .
I am wondering if anyone has tried the new 8GB SD card on the Universal? dose it works?
BTW,My hx4700 which is 2004's unit and it works perfectly with the 8GB CF card. so...the new HCSD card will be working too?
I am using the ADATA 4GB 150X card too,it will take at least 12seconds :shock: to boot the phone pad once I press the CALL button in device shut down mode,is that normal?
thanks,
best.
-LB
SDHC will not work on old and current devices IIRC it needs a special SDHC capable SD slot for it to work with the newer cards. Dunno when SDHC will come to mobile devices though as I fear that the trend is that manufacturer's are moving towards transflash [aka microSD] and miniSD.
my 4GB main SD card worked so well, i bought 4 more to encode movies on
now i need a better DVD ripper Wondershare pocket DVD stupid is too quirky. can't rip some DVDs, sometime frame seqences willl repeat dejavu...
bnycastro said:
SDHC will not work on old and current devices IIRC it needs a special SDHC capable SD slot for it to work with the newer cards. Dunno when SDHC will come to mobile devices though as I fear that the trend is that manufacturer's are moving towards transflash [aka microSD] and miniSD.
Click to expand...
Click to collapse
Thanks for the info bny,
that's a good news for my wallet ....
I've got a Goodram 4GB (x150) card, from Wilk S.A -Poland
works perfectly
I am about to buy a 4 GB 150x Class 2 SDHC Secure Digital Card for my recently bought O2 Neo handset. I would like to know if anyone has tried this earlier and knows if it works.
Umesh
O2 Neo
i have a-data 4gb turbo sd 150x and it works well
Thanks Speeed. Do you know if that is a Class 2 SDHC. I remember reading some post here which said a SDHC 2.0 format might not be compatible with HTC Prophet.
is SDHC working in a prophet?
Hey Umesh, I do have exactly the same question. I already have a 1 GB SD card. But now I need to upgrade and I am wondering if I can buy a SDHC class 2 or even SDHC class 6 card. Can you please post your experiences.
ADVAthanksNCE, Peter
umesh said:
I am about to buy a 4 GB 150x Class 2 SDHC Secure Digital Card for my recently bought O2 Neo handset. I would like to know if anyone has tried this earlier and knows if it works.
Umesh
O2 Neo
Click to expand...
Click to collapse
I have the Transcend 150x 4gb SD working in my Prophet for almost a year. The only issue is one that applies to all SD cards and not just the 4gb, that is today plugins sometimes don't like to be on the SD card, otherwise everything works perfectly. It seems to me I remember at the time I bought my 4gb SD card there were some models that had issues with the Prophet. I guess you could just get one of the cards that has already been proven to be compatible.
transcend card
I also have a 4gB transcend card that works perfectly....
gujjuman said:
I also have a 4gB transcend card that works perfectly....
Click to expand...
Click to collapse
You can order one here, they have others for sale too, but you might want to get one that works for sure.
http://www.newegg.com/Product/Product.asp?Item=N82E16820163159
Topram 4Gb
I have a Topram 4Gb 150x sd card and have had no problems. I got it from Ebay.
please note it uses SD 1.1, which is the maximum the Prophet supports.
check it out here:
http://cgi.ebay.co.uk/TOPRAM-150X-4...ryZ18871QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
Hi,
I have a samsung oem 4go 150x, bought on ebay from fastmemoryman, and it is also working perfectly on my prophet.
Topram and Soho failed. Still looking for a good 4GB card!
Hello guys,
Here's my experience with 4GB SD card dilemma using a Qtek s200:
1) Topram 150X:
*Works ok till 2GB but data written beyond 2GB can not read back.
*Surprisingly there's no error after chkdsk, xp-scan.
*No error when writing beyond 2GB but data is not really written.
*Original content of the sectors do not change at all.
*Deep analysis under WinHex states defect starting at sector #3964927 of about 8 million sectors.
* FAT16 and FAT32 all formatting combinations possible on Qtek as well as XP which is surprising. No error using Panasonic SD Formatter as well. This card doest not react to any write operation, even if it fails !!!
SOLUTION: Created a 2GB partition using WM5torage + XP and bypass defected area.
2) SOHO 150X:
*Looks horrible with 5th class sticker misaligned.
*Comes with 90MB of defected sectors already marked bad in FAT.
*Healty reformatting impossible.
*All sectors beyond 1GB are unreadable & unwritable.
SOLUTION: Sent it back to the seller.
QUESTION TO ALL POSTS CLAIMING TRANSCEND & A-DATA WORKS WITH NO PROBLEM:
Of course the 4GB SD's are recognized well when insterted in Prophet. But did you go beyond 2GB and up to 4GB? I strongly need someone who would confirm having written full 4GB and able to read it back with no data loss !!!
I think just inserting the card and seeing 3800MB something free means NOTHING and you should load the card completely without no data loss to be sure everything is OK.
Many posts claim problem with camera not saving to card. No sense anymore, it's not related to the cards but the cam.app as the free space calculation issue is well known now.
Waiting for some good news about Trancend and A-Data which i want to try asap...
SHHC not compatible with Prophet
Not yet tried but given all the information on various sources, Prophet has no chance to recognize any SDHC card. When inserted we will probably won't see anything. Like a RAW card.
The most logical explanation is that the CSD layer of SD2.0 is organized diffently than SD1.1.
Didn't see yet any opportunity to use them with a future ROM update. The hardware limitations of the reader on prophet may be the cause.
g3k said:
Hello guys,
Here's my experience with 4GB SD card dilemma using a Qtek s200:
1) Topram 150X:
*Works ok till 2GB but data written beyond 2GB can not read back.
*Surprisingly there's no error after chkdsk, xp-scan.
*No error when writing beyond 2GB but data is not really written.
*Original content of the sectors do not change at all.
*Deep analysis under WinHex states defect starting at sector #3964927 of about 8 million sectors.
* FAT16 and FAT32 all formatting combinations possible on Qtek as well as XP which is surprising. No error using Panasonic SD Formatter as well. This card doest not react to any write operation, even if it fails !!!
SOLUTION: Created a 2GB partition using WM5torage + XP and bypass defected area.
2) SOHO 150X:
*Looks horrible with 5th class sticker misaligned.
*Comes with 90MB of defected sectors already marked bad in FAT.
*Healty reformatting impossible.
*All sectors beyond 1GB are unreadable & unwritable.
SOLUTION: Sent it back to the seller.
QUESTION TO ALL POSTS CLAIMING TRANSCEND & A-DATA WORKS WITH NO PROBLEM:
Of course the 4GB SD's are recognized well when insterted in Prophet. But did you go beyond 2GB and up to 4GB? I strongly need someone who would confirm having written full 4GB and able to read it back with no data loss !!!
I think just inserting the card and seeing 3800MB something free means NOTHING and you should load the card completely without no data loss to be sure everything is OK.
Many posts claim problem with camera not saving to card. No sense anymore, it's not related to the cards but the cam.app as the free space calculation issue is well known now.
Waiting for some good news about Trancend and A-Data which i want to try asap...
Click to expand...
Click to collapse
Friend. I have been using the Transcend 4gb 150X with my prophet for almost a year and let me tell you that baby is full!!! I have my GPS maps, a few videos, some big apps, and the rest filled with as much music as I can cram into the thing. It works without any problems at all, I also specify images to be saved directly to the card with no problems. I am not the only one that has reported compatibility with the Transcend.
g3k said:
QUESTION TO ALL POSTS CLAIMING TRANSCEND & A-DATA WORKS WITH NO PROBLEM:
Of course the 4GB SD's are recognized well when insterted in Prophet. But did you go beyond 2GB and up to 4GB? I strongly need someone who would confirm having written full 4GB and able to read it back with no data loss !!!
I think just inserting the card and seeing 3800MB something free means NOTHING and you should load the card completely without no data loss to be sure everything is OK.
Many posts claim problem with camera not saving to card. No sense anymore, it's not related to the cards but the cam.app as the free space calculation issue is well known now.
Waiting for some good news about Trancend and A-Data which i want to try asap...
Click to expand...
Click to collapse
+1
I'm using 4go SD card for more than a month... it is almost full and no problem with any kind of data...
So, it work perfectly.
For those than can't save photos on SD card, this has nothing to do with the SD card format. It depends on if you've unlocked Ext rom or not. It depends also of the rom you've installed on your prophet, some home cooked rom than have native unlocked ext rom will show the same issue.
4GB SD cards on Prophet
Thanks matterhorn for making it more precise. It's very nice to hear such clear feedback.
...and Cedric, are you also talking'bout a Transcend?
I guess you both use your cards on the PC using regular card readers. 2GB and FAT32 compatibility should be enough o cope with 4GB. If the card is healty, i see no reason why a recent, non-SDHC reader would not work with 4GB SD.
I also guess you didn't have any problem using full capacity after re-formatting. Reformatting should not be a problem for a good 4GB card to become bad.
I think i'll give another try with Transcend which is a reliable company and registered to sdcard.org while SOHO and TOPRAM are not. In my language, we call them MANUFACTURERS WORKING UNDER THE STAIRS.
g3k said:
Thanks matterhorn for making it more precise. It's very nice to hear such clear feedback.
...and Cedric, are you also talking'bout a Transcend?
I guess you both use your cards on the PC using regular card readers. 2GB and FAT32 compatibility should be enough o cope with 4GB. If the card is healty, i see no reason why a recent, non-SDHC reader would not work with 4GB SD.
I also guess you didn't have any problem using full capacity after re-formatting. Reformatting should not be a problem for a good 4GB card to become bad.
I think i'll give another try with Transcend which is a reliable company and registered to sdcard.org while SOHO and TOPRAM are not. In my language, we call them MANUFACTURERS WORKING UNDER THE STAIRS.
Click to expand...
Click to collapse
I use an normal SD card reader to format my card in FAT32 using XP every time I change my ROM, just to make sure there are no hidden nasties to cause problems. Newegg.com has good prices on the Transcend .
Also that tip about the unlocked extended ROM is a good one. When you can have 4gb, who cares about a few megabytes.
So can I assume to confirm the usability of a 4 GB card on my Neo -
If I slide in the 4 GB Card and it shows full memory (4 GB) as available in Memory Status --> Storage Card - that would imply that the full card is (read/write) compatible in the device?
Matterhorn, is your working 4 GB card SDHC 2.0 format ?
Practically, at best I would have only about a couple of minutes to test the 4 GB card at the store where I buy.
Anybody know if This PDA can support 4GB miniSD?
Thanks.
The Wizard is miniSD compatible. miniSD is derived of the SD specification that support up to 2GB memory cards. 4GB cards are SDHC compatible derived of the SDHC specification. For this reason 4GB memory cards are not compatible with the wizard neither with TyTN. I don't know any 4GB miniSD card from any fame manufacturer.
More information on this link from SanDisk:
http://www.sandisk.com/Assets/File/pdf/retail/SDHC1.pdf
Thanks maca2406.
But, did you try?
Anybody try it and don't work?
Thanks
ive got a 4gb sd card working with mine..i got it as a present so im not sure where it's from since it hasnt got a name on it..but it does work..
Hello EgemenBor,
Not 4GB SD but 4GB miniSD card on a MDA Vario (or Wizard, Qtek 9100, Imate K-Jam), right?
Thanks
Nope, but maybe a generic product works, look this link:
http://www.mobymemory.com/proddetail.asp?prod=miniSD_4096mb_MOBY_002
I don't trust on non branded products then I can not respond your question. but is important to know that neighter fame manufacturer has 4GB miniSD cards for sale (ex. SanDisk, Kingston, etc).
From that SanDisk article:
2. Look for SDHC logo on card and packaging itself
a. GB SD cards without SDHC logo are non-compliant with the SDA 2.00
specification.
Click to expand...
Click to collapse
Notice, they say "non-compliant" and NOT "non-existent." They are obviously cow-towing to device manufacturers here, plus expecting us to foot the bill!
The problems I've heard of with these cards are:
1.) They don't last as long. (Neither did 3.5" Low-Density Floppy Disks when formatted as High-Density, but I've still got a few originals hanging around that work....) It would be great to know what proccess they were using to create these drives as opposed to the 2GB ones....
2.) The card may need to be repartitioned into 2-2GB drives. (See this thread)
please remember that just because it doesn't meet the new standard, doesn't mean it doesn't work with the older standard-devices
I, for one, am grateful there are vendors serving this sub-market, even though the major players are moving on!
Thanks Blazoner.
Anybody have a miniSD 4GB card on a Wizard, that works well?
Thanks
maca2406 said:
Nope, but maybe a generic product works, look this link:
http://www.mobymemory.com/proddetail.asp?prod=miniSD_4096mb_MOBY_002
I don't trust on non branded products then I can not respond your question. but is important to know that neighter fame manufacturer has 4GB miniSD cards for sale (ex. SanDisk, Kingston, etc).
Click to expand...
Click to collapse
I have 2 mobymemory cards 2gb and 1 gb both work v well - if mobymemory say this 4gb card will work i trust them - i will most likely get one!
I have said all along that i think a 4gb mini-sd card will work in the wizard as a 4gb sd card works in a prophet and they really have v similar roms. 4gb even works in a magician and that has an even older rom.
I base myself on what SanDisk says in this link in red:
http://www.sandisk.com/Compatibility/Device(8040)-T-Mobile-MDA_Vario.aspx
T-Mobile MDA Vario
(Mobile Phones)
Maximum capacity for this device: May support up to 2GB
Please check with your device manufacturer for details.
Also, SanDisk doesn't manufacture 4GB minisd cards. I have learned to pay attention to what SanDisk says
It would be necessary to check if to use more than 2gb works ok with the Wizard with this 4gb minisd card. Unfortunately I am in America and I don't have access to mobymemory devices.
maca2406 said:
I base myself on what SanDisk says in this link in red:
http://www.sandisk.com/Compatibility/Device(8040)-T-Mobile-MDA_Vario.aspx
T-Mobile MDA Vario
(Mobile Phones)
Maximum capacity for this device: May support up to 2GB
Please check with your device manufacturer for details.
Also, SanDisk doesn't manufacture 4GB minisd cards. I have learned to pay attention to what SanDisk says
It would be necessary to check if to use more than 2gb works ok with the Wizard with this 4gb minisd card. Unfortunately I am in America and I don't have access to mobymemory devices.
Click to expand...
Click to collapse
I will let you know if it works when i get one
maca2406 said:
Nope, but maybe a generic product works, look this link:
http://www.mobymemory.com/proddetail.asp?prod=miniSD_4096mb_MOBY_002
I don't trust on non branded products then I can not respond your question. but is important to know that neighter fame manufacturer has 4GB miniSD cards for sale (ex. SanDisk, Kingston, etc).
Click to expand...
Click to collapse
They claim it will work:
Mobile Compatibility List: New!QTEK 9100
Click to expand...
Click to collapse
Anyone any experience with these cards?
I just buy one miniSD 4GB from Transcend (55€!)... I will check and post...
turns out I have the 4gb memory card from mobymemory...last couple of days its been giving me a lot of hassle..asking me to format it which I did twice and now its stopped working the phone just does red the card...I've emailed mobymemory 5 minutes ago lets see what they reply with..anybody else have the problem of the phone not 'seeing' the memory card?
EgemenBor said:
turns out I have the 4gb memory card from mobymemory...last couple of days its been giving me a lot of hassle..asking me to format it which I did twice and now its stopped working the phone just does red the card...I've emailed mobymemory 5 minutes ago lets see what they reply with..anybody else have the problem of the phone not 'seeing' the memory card?
Click to expand...
Click to collapse
How long did it work ok? try formatting it on the device using sktools or storage tools
Take a look at this thread. It describes this problem and it's solutions in detail. Just read miniSD instead of SD.
Remember, it can still be compatible with the current standard, even if it doesn't comply with the new standard.
If all Fords are cars, does that mean all cars are Fords?
If all miniHDSC cards are 4GB or larger, does that mean all 4GB or larger memory cards are miniHDSC cards?
Click to expand...
Click to collapse
Hi,
I receive my new miniSD 4GB card... but my Wizard don't recognize it!
Is a new SDHC and even my laptop with a pcmcia reader card (old) don't recognize too! But I think card is OK because with my Sanyo Xacti C6 work well!
What can I do? Can I make 2x 2GB partitions FAT 16... maybe Wizard work?
Thanks
well my phone isn't reading the memory card and when I try to access it via a card reader on my pc nothing happens...just gets stuck..could it be that the card is dead?
I've had the problem for the past week or so...the card in general was really slow I.e. uplaoding files and accessing the card on my pc would take a while..
I try format miniSDHC 4GB card with 2 partitions 2GB FAT16 but Wizard don't recognize it! Even my old pcmcia card reader can't "see" it! At laptop only work with a card reader that works with SDHC!
Any Help?
Thanks
By this experience, I think Wizard can't read any miniSDHC card unless HTC make a firmware update (will do sometime?) to support this new standard SDHC!
Anybody have better good news?
But, I can't understand why Qtek 9000 and S200 can read SD 4GB, like some persons report it!!!
Thanks