Related
go to hklm\software\oem\voicecommand and set the value of "launchapenable" from 1 to 0
when activating voicedial from your headset (press connect button at the headset 2 sec.) it diverts all audio to the bluetooth.
works also with musik.
pressing the button again it disconnects the bluetooth and the main speakers are active again.
in this case the original voice dial does not work anymore until you change the value back to 1.
for me a good solution because i don't use voice dial and prefer insted skype and headset.
Very good tip...will try that!
Cheers...!
Works on QTEK S100 with Jabra Bt 250 Headsets?
Do you happen to know if the BT specification of the EXEC allows it to transmit stereo audio? Say from a mediaplayer to a BT car kit?
If so, that would send me over the edge and Id have to buy a BT carkit!
...ohh, on 2nd thoughts, it would also depend on the bandwidth too. Anyone know what sort of frequency range BT stereo may be limited to?
for stereo output is another reg.hack needed i think. because pushing the voicedial button at the handset it activates the bluetooth headset profile for listening to the voice but voicedial doesnt start. so you can use it for normal micro and loudspeaker.
maybe anybody knows how to activate in this case the "high quality audio profile" by editing the registry instead of "headset profile"?
Great job, The sound (in music) is good ? i tested this but the sound wasnt good.... I think my headset isnt good for music.
yes it depends on the bluetooth profile. for good quality "high quality audio" (A2DP) profile is needed.
blueangel
would this work on a blueangel running WM5?
gazela00 said:
Works on QTEK S100 with Jabra Bt 250 Headsets?
Click to expand...
Click to collapse
How did u do it....I mean yours is not a WM 5 OS...Pls advice
hdubli said:
gazela00 said:
Works on QTEK S100 with Jabra Bt 250 Headsets?
Click to expand...
Click to collapse
How did u do it....I mean yours is not a WM 5 OS...Pls advice
Click to expand...
Click to collapse
No it does not work in QTEK s100....
Works -but not great
very tinny muffled sound on my moto HT 820, was hoping it would work as well as the bluetooth stack update for the magician.
Sound does come out in both ears on my stereo phones. but I dont desire to listern to the tinny sound.
Still great find and discovery. Just hope someone can progress it to A2DP asap.
sorry, but can anybody tell me how to edit the registry in WM5? I never did it before. What tool do you guys use? Is it something free?
Thanks.
I used PHMREGedit
Here's the link:
http://www.freewareppc.com/utilities/phmregistryeditor.shtml
andyes....it's free.
Tried it with my BT200
I know the registry works....but cannot get it to play on the headset.
It works...becos upon pressing the phone button on the head set for 2 sec, the audio comes from the handset. On redoing it again, the audio goes off from the handset.
Mine is working fine. I really like the way its now.
Thanks a lot.
Ooops....
my Bt200 wasn't working. That's why there was no audio coming from it.
Need to figure out why there is no audio coming from the headset.
Sigh another problem!
So basically, the registry works.
Im using Total Voice COmmander and it works with WMP.. No need to install another software to play music thru BT.
I just press my Jabra headset twice and it goes "Say Command".. then I say "Play a music"..
Sometimes it's stubborn and Calls someone or Says "Today you have no Appointment" but I guess with a lot of practice, my Dopod understood what Im saying and played me a song.. Now, Im having trouble with my Dopod catching the title of the song i want it to play. I've placed voice tags on the songs and 50% of the time, my dopod got it right.. got to work on the other 50% though..
I just bought a headset for my Atom Exec and I can't work it all out, I want to listen to music from the memory card so I have set the bluetooth to Hands Free, Wireless Stereo and headset, all three are ticked. All is working fine but the only problem I have is when the phone rings you can only here it through the stereo headphones which makes sence but I can see this causing problems if I put the headphones down, I will miss calls as I want hear the phone ringing. Is there a way to make the phone ring also threw the speaker on the phone as well while using the headphones?
Unfortunately I don't think so. If you turn the Stereo Headset profile on all sound is routed to the headset. If someone knows how it would be great.
What you can do instead is set the phone to vibra + ring mode so that if you don't have the headset on, at least the phone will still shake.
hi Seal,
which bluetooth headset did you get? i'm asking because i just got the atom (not exec) and can't get the BT to work as a wireless headset - it only works when making calls.
also, you mentioned 'wireless stereo' checkbox, i don't see this option in the atom but it could be an exec feature.
thanks.
Hi, I bought the Plantronics, I use them every day and love them, it is such a great thing to not have wires hanging around.
http://www.plantronics.com/australia/aus/products/cat5180067/cat5620033/prod29780013
"I has an Atom", and I also have a mono, ordinary Bluetooth headset (Planex BT-03HS).
Seal: try turning off the Wireless Stereo profile, then getting this program called BlueMusic by Teksoft - it has an option you can uncheck that will allow the ringtone to come through its original source instead, while still routing music through your BT.
Yes, the program can do this even in unlimited trial mode - however, it only puts your music back on the BT band after a call in full-mode. I have no idea if this will work on stereo headphones like yours, but it's worth a shot.
Slamming_Sammy: With BlueMusic I can pipe stuff from TCPMP to bluetooth headset - which supports only handsfree - just fine, whilst still not missing a call. BlueMusic emulates the A2DP protocol so your phone doesn't have to. There's actually a free binary out there called BTAudio (which Bluemusic is based on), but its less stable than Bluemusic when it comes to disconnects and receiving calls.
Oh, and by the way, the Atom does support Wireless Stereo (A2DP). However, you can ONLY see it if your bluetooth headset has the profile as well (mine doesn't by the way). AFAIK only stereo headsets have this; even the newest BT2.0 mono headsets don't.
thanks a lot Ultimate. I was just about to try btaudio which by the way, works great, so I won't try bluemusic yet. so you're saying if my BT headphone is A2DP capable then I wouldn't need to run btaudio to route audio to my headset?
thanks.
Yes, that's what I'm saying.
Bluetooth stereo headsets are expensive, tho, AND the Atom is known to have dodgy A2DP support (except with BT2.0 devices), so you might want to hold out on the purchase.
Can enyone tell me if it is possible and how??
I have a Parrot 3100 and works fine for calls but can't put it saying nothing that comes from TOMTOM.
I have a friend that one time he heard the tomtom on a head-set.
But only one time and never more.
He doesn't know how!
Can enyone help me?
seem to recall people saying it works if
gps is connected first and then headset
You need a bluetooth headset with AD2P proflie. The standard hards free profile will only route calls to the headset. That said, if you press the voice dial button on your headset when an instruction is being read out, you will hear it in the headset (once only) - probably what the friend experienced.
Hi. I use a piece of software with my standard bt handsfree.
Chartcross Bluetooth Audio Router
The sound quality isn't stunning, but it lets all sounds that usually come from the inbuilt speaker to go through the handsfree instead
Tryed Chartcross Bluetooth Audio Router on my Trinity WM6 using hands free car kit (Delta System)... When activated it switches off the car speakers (like when calls arrive) but sounds still are on the speaker of pda...
Do you thing it will be necessary a reg tweak?
THX
No idea sorry. I only got my Trinity 2 days ago. I was using a prophet before which worked fine with it. I'll let you know if i do find anything though
IN MY HAND-FREE car kit my tomtom turned off the radio and instructions in car speakers.
right now that doesn't happen.
Infortunately i've tried so many roms i don't know i used at that time, and how make car speakers work again. Any help?
Well, just got my TyTN II. For me it is worth the upgrade from the TyTN.
I have only one issue. My Jabra 320s headset is about 30% lower in recieving volume than it is on my TyTN I. On the original TyTN, the volume was just about right, any lower and it wouldn't be usable, but now that I am running it on the TyTN II it is un-usable at such a low volume.
My question is this?
Is this issue fixable through software/registry etc...
And does anyone have any idea how I can fix this?
JB
That's the big question, low BT headset volume when calling is a consistant issue with most headsets on Kaiser vs Hermes. Time to email HTC support, it's a bug.
lol no problems here. Using Plantronics Voyager 510SL.
Even if it's a bug with the Kaiser, (Probably software) we won't see any fix from HTC anytime soon. That's why I am asking the pros over here at XDA if there is a software/config workaround/fix that can be implemented.
JB
nuclear said:
lol no problems here. Using Plantronics Voyager 510SL.
Click to expand...
Click to collapse
ditto... while i'm not using the 510SL, i am using the 510 and it's quite loud with my Kaiser..
I found my problem and fixed it...
Ok, I'm an idiot... I fixed my bt headset issue with low recieving volume. Through my haste to try and fix the volume issue, I missed one key setting... I forgot to click on the small speaker icon on the top right of the screen and push the volume sliders to max.... Apparently, I only tried to use the jog wheel alone to raise volume and that works, but seems to work seperately from the volume icon levels.
So for me... I have the same volume levels I had as before with the TyTN I.
JB
I have another problem with this headset, I don't get the "stereo" service. The only thing my kaiser recognises is the "handsfree" service.
Does somebody now how I can make it work?
Buzz313th said:
Ok, I'm an idiot... I fixed my bt headset issue with low recieving volume. Through my haste to try and fix the volume issue, I missed one key setting... I forgot to click on the small speaker icon on the top right of the screen and push the volume sliders to max.... Apparently, I only tried to use the jog wheel alone to raise volume and that works, but seems to work seperately from the volume icon levels.
So for me... I have the same volume levels I had as before with the TyTN I.
JB
Click to expand...
Click to collapse
Sorry, this raises the volume in the BT headset for all "system" sounds like voice dial confirmation talkback to the headset, but the in-call volume remains lower than Hermes once you are connected, the slider has no effect. To be clear, if you adjust the slider while NO call is in progress, the volume in the headset will be affected, but after connection the sound volume remains low, no matter how you left the slider from before.
ronaldlokers said:
I have another problem with this headset, I don't get the "stereo" service. The only thing my kaiser recognises is the "handsfree" service.
Does somebody now how I can make it work?
Click to expand...
Click to collapse
Yes.. I had the same problem...
This may sound rediculous on how I fixed it, but it worked.
I paired my laptop and the Headset and then tried to listen to stereo music, and also paired the phone with the laptop and then it would pair correctly with the Jabra bt320s.
It seems to me that the kaiser has a few BT bugs that need to be worked out, and that different pairings will change either reg settings or configs that arent available to the UI...
JB
RemE said:
Sorry, this raises the volume in the BT headset for all "system" sounds like voice dial confirmation talkback to the headset, but the in-call volume remains lower than Hermes once you are connected, the slider has no effect. To be clear, if you adjust the slider while NO call is in progress, the volume in the headset will be affected, but after connection the sound volume remains low, no matter how you left the slider from before.
Click to expand...
Click to collapse
]
You are correct and I am still having low BT call volume, but at the time I was having low BT stereo volume as well. The sliders fixed the stereo problem, but didn't fix the BT call volume.
I haven't tried the fix yet, but I believe someone claims to have fixed the BT call volume with a cooked rom or a modified rom...
I'm not worried that we will have this fixed sometime soon.
JB
ronaldlokers said:
I have another problem with this headset, I don't get the "stereo" service. The only thing my kaiser recognises is the "handsfree" service.
Does somebody now how I can make it work?
Click to expand...
Click to collapse
I am using my Motorola HT820 BT headset without any issues since day one. I simply paired them, and made sure Stereo Headset was selected in the bluetooth options, and they just work. Volume and Track changes from the headset also work great. One thing I never liked about the HT820 was it's range, just about 20 ft. I used to have it paired with my laptop, but no longer since I have 4G of music on my phone....
how long does the kaiser battery last listening mp3 throught bluetooth headset?, anybody tried it?
will it drain battery MUCH faster than using included headset?
jspohn said:
I am using my Motorola HT820 BT headset without any issues since day one. I simply paired them, and made sure Stereo Headset was selected in the bluetooth options, and they just work. Volume and Track changes from the headset also work great. One thing I never liked about the HT820 was it's range, just about 20 ft. I used to have it paired with my laptop, but no longer since I have 4G of music on my phone....
Click to expand...
Click to collapse
I bought a plantronics pulsar 260 and that one works too. In the shop they told me that jabra has much problems with their bluetooth headsets!
pepeto2001 said:
how long does the kaiser battery last listening mp3 throught bluetooth headset?, anybody tried it?
will it drain battery MUCH faster than using included headset?
Click to expand...
Click to collapse
I don't really have any idea, since I charge it nightly. I normally leave the BT on all the time anyway.
Strange problem with handsfree mode
Hi guys,
I have just purchased the Jabra 320s and was happy with the stereo quality and apart from the low volume issue on handsfree calls were handled quite well through the device.
Once, When the phone rang, it was answered by my wife using the phone answer key instead of the Jabra's answer button and since then I cannot answer calls through the Jabra. I have tried the options on the Kaiser whilst on a call to have the call transfered to handsfree but that also does not work, I have tried resetting and re-paring both devices and it still does not work for calls on handsfree (once paired, I have the handsfree option and stereo selected). The stereo is however working fine without any problems when playing mp3's.
Any ideas?
HasC said:
Hi guys,
I have just purchased the Jabra 320s and was happy with the stereo quality and apart from the low volume issue on handsfree calls were handled quite well through the device.
Once, When the phone rang, it was answered by my wife using the phone answer key instead of the Jabra's answer button and since then I cannot answer calls through the Jabra. I have tried the options on the Kaiser whilst on a call to have the call transfered to handsfree but that also does not work, I have tried resetting and re-paring both devices and it still does not work for calls on handsfree (once paired, I have the handsfree option and stereo selected). The stereo is however working fine without any problems when playing mp3's.
Any ideas?
Click to expand...
Click to collapse
Did you solve this problem, I just bought the 320s and am experiencing the same issue?
Does Wing work with Stereo Bluetooth Headset _ONLY_? One bluetooth headset I have works with Dell X51v, but has no luck with the Wing. Seems Wing requires A2DP(??).
Any ideas?
gbzbz said:
Does Wing work with Stereo Bluetooth Headset _ONLY_? One bluetooth headset I have works with Dell X51v, but has no luck with the Wing. Seems Wing requires A2DP(??).
Any ideas?
Click to expand...
Click to collapse
No, stereo is not required. I have two very cheap bluetooth headsets that both work with my Wing. The wing doesn't require A2DP, but does support it (supposedly).
On that note, is your headset visible in the Wing when you go and search for bluetooth devices (add new) in the bluetooth applet?
The headset works fine with X51v PDA so I know it is functional.
Yes, the headset is visible in the Wing's BT management interface. It can pair the partnership without any problem, when I tried to connect, sometimes I saw the microphone icon appear in the top bar of the screen, but it disappeared in seconds.
When I adjusted the volume, sometimes I heard clicks from the headset, but when I played music/sound, they always came out from the speaker.
What am I missing here? Thanks!!
psyop1 said:
No, stereo is not required. I have two very cheap bluetooth headsets that both work with my Wing. The wing doesn't require A2DP, but does support it (supposedly).
On that note, is your headset visible in the Wing when you go and search for bluetooth devices (add new) in the bluetooth applet?
Click to expand...
Click to collapse
update:
I got the bluetooth headset to work in the phone mode. but not with mp3/movie.
everything from the mp3 players (pocket music and media player) still come out of Wing's speaker...
gbzbz said:
The headset works fine with X51v PDA so I know it is functional.
Yes, the headset is visible in the Wing's BT management interface. It can pair the partnership without any problem, when I tried to connect, sometimes I saw the microphone icon appear in the top bar of the screen, but it disappeared in seconds.
When I adjusted the volume, sometimes I heard clicks from the headset, but when I played music/sound, they always came out from the speaker.
What am I missing here? Thanks!!
Click to expand...
Click to collapse
any solution for listenning to music!?!?!?!?
bt audio is a cab where the music will play on bluetooth
my headset is not stereo, and after i tried bt audio nothing happened.
Am I doing something wrong?
Please help!
Thanks!
Also havng trouble rerouting calls to headset...
Any advise???