Related
Hi,
What u guys recommend is it too late now ?...When it's Successor Kaiser will be out ?...Keem reply coming..
Thanks in advance Cheers mates
Bump........
No One care To reply in the community of 200,000
depends on what you will be using it for really, if you want a stable bluetooth connection for a car kit and you dont want to be rebooting the phone daily then in my experience i would not buy one. If i new about these problems before i got mine then i definately would not of brought it.
it does have a whole host of features though so i suppose you cannot have everything.
If they sort these problems out which i keep hearing they will then the phone will be worth having.
I will now go and see what the Kaiser has to offer as might be time to switch already from this rubbish. (Annoyed as you can tell and only my opinion, due to the fact that car kit works fine on my wizard and no rebooting of phone. This one does not work correctly with car kit, people cannot hear me speak, and phone has to be rebooted 2-3 times a day, and yes the phone has been replaced and it is the same problems.)
zomig
there is nothing wrong with my car kit as my wizard (o2 xda mini s ) works 100% with it, this is an issue with the Bluetooth stack on this device and has been mentioned more times than i care to remember.
It quite simply does not work. It is also supposed to be fixed when they eventually release a new rom. But i wont hold my breath.
If you really need the keyboard, then, the Hermes might prove OK (albeit, if I were you, I'd REALLY wait!). If you don't need it, wait or get he Trinity - the latter is much better IMHO than the Hermes (built-in GPS and, hopefully, FM radio).
Strange My new Hermes works better with my Bluetooth Headset than my wizard did. Sound is clearer and louder. and on my wizard when I would answer a call the caller would get a earsplitting screech as I pres the answer button. This is not a prob with the TYTN
Jules
Thanks u all guys .....really appreciate it
I don't care abt Bt Problem will have a look on trinity does t-mobile rlease trinity ?
I hope someone is able to help me.
Okay I have the Wizard, upgraded to Wizard Mobile 6.
Shortly after, all my bluetooth devices (car kit, headset...) had their microphones die. In other words nobody could hear me when speaking through any kind of bluetooth.
I then flashed the Radio ROM to a different version, and bluetooth was repaired. But now the problem has returned for no reason.
Why does my Wizard's bluetooth audio in keep failing, yet its speaker works fine and I can hear other people?
Is there a recommended update to the Bluetooth Stack I can try?
CJSnet said:
I hope someone is able to help me.
Okay I have the Wizard, upgraded to Wizard Mobile 6.
Shortly after, all my bluetooth devices (car kit, headset...) had their microphones die. In other words nobody could hear me when speaking through any kind of bluetooth.
I then flashed the Radio ROM to a different version, and bluetooth was repaired. But now the problem has returned for no reason.
Why does my Wizard's bluetooth audio in keep failing, yet its output works fine and I can hear other people?
Is there a recommended update to the Bluetooth Stack I can try?
Click to expand...
Click to collapse
I do have exactly the same problem. After flashing XDA Mobile 6 Release 3, microphone has worked for couple of days, and then suddenly died. Interesting, microphone is working with Notes but not with phone. I went back to
XDA Mobile 6 Release 2 for some other reasons (read: 2MB more free memory for critical application) but the problem with Bluetooth microphone remains. Radio is 2.25. Any advice?
--
Pogo
There are also at least 3 people at the Wizard Mobile 6 thread with the same issue. Very surprised none of the experts here have been able to propose a fix. Makes the phone virtually worthless if you can't use it in the car etc.
As a workaround, I have found if you mute then unmute the phone volume, the issue is sometimes temporarily resolved for a short time. It always comes back though
I have been asked to join this thread. Per a PM:
We love the ROM you have provided, and are very thankful, however it was not until installing it that this issue arose. It does not seem fair to leave a number of people with a phone that is unusable for 'phone calls'.
Click to expand...
Click to collapse
(Bolding added by me)
I don't know what to tell you. If the rom doesn't work for you, then don't use it... Don't tell me its "not fair". I use MS Voice Command, and XM6r3 and have never seen this issue with my Bluetooth headset (Jawbone). I've also tested this out with a Plantronics Explorer 210 headset that I have and it has not problems with XM6r3 either. My A2DP headset (Spider) also works fine on XM6r3 with MS VC. I've stated this in the past when people have said they have BT issues on my rom. Sorry, but I can't reproduce it, so its hard for me to fix something that isn't broken for me.
Try this... Do a hardreset on your device (take a backup first if you want), then leave it as the base rom with NOTHING extra added. Run that way for a few days (how ever long it has taken before) and see if the problem happens again. If it doesn't then its not my rom but something being added to it (probably screwing with the registry someplace). If it does happen, then as I've stated before, I've seen a number of BT devices be flakey on WM6 (especially car kits). Try a different rom then. If someone with the problem can pin it down, I'll be happy to do what it takes to fix this issue if its something in the rom that is causing it.
Thanks mfrazz. What wasn't fair was not the bug, but that you had not responded to previous mentions of it, i.e. not fair to leave us with it. We love the ROM and put a lot of our life in your hands in a way, as we rely on our device so much for work and play. Hope you understand.
Now then, I have already tried a hard reset and the problem never occurs, until WM6 is put back on. Sure, 'use another ROM' is all very well, but we love yours - again, hope you appreciate the sentiment. If you're in a relationship, are you the kind of guy who tells a girl who loves you, 'find another boyfriend', or do you try to make it work
SO, I am wondering if this is related to the glitch you mention where sometimes when switching out of vibrate mode, the ring tone becomes muted. For that, your solution is to play the ringtone again, then it becomes unmuted.
Similarly, our Bluetooth devices mic's are being muted, and if we mute then unmute them again, then they become unmuted. A link that helps point you in the right direction?
Please note, this is not certain bluetooth devices being 'flaky', this is ALL devices. 4 at the latest count, including rock solid Nokia CARK7W car kits and Jabra headsets.
Some people put it down to MS Voice Command, which I have never installed. What does that program do, do you know, to cause the bug? Again I hope that might help point you in the right direction.
Please don't dump us Let's try to fix what is wrong in this relationship
BT problem solved?
CJSnet - not sure if you have resolved this. I was having the same problem and noticed people with reTouched dialer were not, so I loaded that dialer and the problems went away. I am using a Plantronics Voyager 510. Seems the problem might be with the standard dialer.
Hope this helps
CJSnet said:
There are also at least 3 people at the Wizard Mobile 6 thread with the same issue. Very surprised none of the experts here have been able to propose a fix. Makes the phone virtually worthless if you can't use it in the car etc.
As a workaround, I have found if you mute then unmute the phone volume, the issue is temporarily resolved for a short time. It always comes back though
Click to expand...
Click to collapse
Thanks, I'll give that a try. However WM6 has pretty much finished the Wizard for me, and I'm hoping to get a TyTN II soon as a replacement. Shame.
Hi,
on my htc wizard the internal speaker (for phone) and microphone stopped working. if i connect the headset it works, i can use the phone with it and talk to people. if i disconnect the headset, i cannot hear anything and the communication partner does not hear me. might this be a software issue or is a hardware problem more likely?
i think it might be the jack for the headset, since the display still works and all connections are established using one cable between the parts of the phone. And it is rather unlikely that the speaker and the microphone break at the same time. am i correct in assuming the same logic/amplifier circuit is used for the headset jack and the internel microphone/speakers?
disregard that, after penetrating the headset jack with a needle it works again...
Wizard
Ok, now I have been reading and reading on how to flash the HTC Wizard aka 8125's and I got everything but what I really don't know is...does the sims card need to be in the phone and am I looking to write a unlock code down when and if I see one. I have tried to flash my phone three times and I still can not do it. Even though I am reading the ever detailed and fully understandable directions, I am missing something. Can someone tell what it is?
I just got the Cect P168+ iphone clone (I do not like it) and I really really want to stay with my smartphone and I really want the rom flashed and upgraded, please help me. Someone may even eme to my personal email ([email protected]) if this needs to be done away from this site.
Thanks so much.
KIM
Hi guys,
i recently received my iTech R35 A2DP Bluetooth Headset for my Touch HD which is identical to HTC BH S100 since its only rebranded.
Pairing, controls and everything works fine, but when playing music the connection constantly gets lost for short terms regardless of the distance between the phone and the Headset.
The weird thing about it is, that the headset works perfectly with my friends HD. He even could go away like 10m without any kind of interruption.
I already tried some different settings with HD Tweak but no improvement.
Besides I noticed that overall bluetooth performance with my phone, as it once took about 30 minutes to send a 50MB file, isn't that good.
Thanks for any help!
Update:
I tested the Headset today with two other phones (SE W950i and some Nokia). It worked perfectly so I figure something has to be wrong with my phone. I'll perform a hard reset on the weekend and see if it changes anything. Otherwise I'll have to contact the customer service.
Has anybody here experience with german support. If I had to send the phone in, how does it usually take til u get your phone back?
Well, I just performed the hard reset and it solved the issue. Very strange since I hadn't installed that much programs.
Well, the problem returned and I now figured it out in detail.
There's no correlation with the programs installed.
Once the Bluetooth headset is in the Bluetooth-Device-List as it was connected before the constant lags are there.
If I delete it and re-pair the headset the lags are gone for this one time until the headset got disconnected. Even if I get out of range and return in reach connection is crappy from then on.
Didn't anybody recognize such a strange behaviour too?
I have a similar issue with my Sony Ericsson HBH-IS800 phones.
I thought I'd solved it by re-pairing with the handset, and initially that pairing seemed to last for a while, but now it seems I have to re-pair at least once a day to avoid the stuttering (it's really bad, isn't it?)
Frankly, I'm getting pretty disenchanted with my HD. Every time I discover a tweak which sorts an issue, another issue raises its head. I've lost count of the many hours I've spent trrying to get it to work as it ought to.
Wishing I'd got an iPhone. Okay it's not as good on paper, but at least everything works....
I have to agree the bluetooth is dodgy for me at the best of times in trying to connect to any computer.
Surprisingly, Ive had a good file transfer between my HD and MaxOSX, I can't say the same for Windows XP or Vista where on both accounts it has failed to connect via bluetooth to perform an active sync.
Petee said:
I have a similar issue with my Sony Ericsson HBH-IS800 phones.
I thought I'd solved it by re-pairing with the handset, and initially that pairing seemed to last for a while, but now it seems I have to re-pair at least once a day to avoid the stuttering (it's really bad, isn't it?)
Frankly, I'm getting pretty disenchanted with my HD. Every time I discover a tweak which sorts an issue, another issue raises its head. I've lost count of the many hours I've spent trrying to get it to work as it ought to.
Wishing I'd got an iPhone. Okay it's not as good on paper, but at least everything works....
Click to expand...
Click to collapse
Thanks for your information. At least I'm not the only one with this issue.
Meanwhile I tested this behaviour with my buddies HD and it's the same pattern with his one.
I contacted german support today and will report after their answer.
i've been having the exact same problems with my hd. i would be able to pair it with my landrover, but then the connection would be lost. (there's another thread on this somewhere).
anyway, i tried installing BTRestore and BTRestart along with Mortscript and a custom script to help keep the bluetooth active. however, my problem was not that the bluetooth was turning off, but that the connection would not stay active.
so i installed a custom rom, Dutty's version 1.7, and also installed jetware bluetooth program (www.jetwaremobile.com); so far so good (*fingers crossed*). this is my 3rd day and the bluetooth works great. the phone connects with the car instantly, my phonebook works and i can make and receive calls without losing the connection.
so maybe updating the rom will help you too.
Sorry, it's been a while since HTC answered my questions but since their answer was quite disappointing I had no rush to post it.
Summarized they told me the HTC BH S100 was not compatible with the Touch HD even though I pointed out that it's in compatibility-list of the Diamond and both are running the same Chipset and OS and that it works fine after the first pairing.
As I'm tired of reconfiguring my phone I'll wait some time to flash another ROM. I hope WM 6.5 will be released soon and fix this problem, too.
Hi,
I go into bluetooth and search for my devices on my Omnia 7 but it seems to be stuck on Searching when I try and search for my MW600. Anyone experienced anything similar?
So far I have tried it with a couple of different headphones from SE and Plantronics but still no joy...
Jag har precis samma problem som dig med samma headset plus att min hörlursingång verkar glappa
Exactly the same problem, bluetooth worked for about a month but the quality was terrible. As time went by it got harder to pair with the car and now it just sits there searching...
I have the same issue, struggling with a lot of Bluetooth problems at the moment. I also have a MW600!
I can get it to pair with the MW600 if I turn WiFi off. After pairing it seems to work fine with WiFi back on.
With various power cycles, entering and leaving flight mode etc. I can get it to see some devices. Can't get it to pair with my car kit though no matter what I do, and that's the only thing I really want to pair it with.
It seems to be a common issue with Samsung Omnia 7s and Focuses. There is a blog post that google finds where a guy took his phone back and swapped it for another one, which then worked with all the devices his original didn't. One of the commentors then declared that upgrading the firmware to JK1 also sorted the issue. I promptly did this, voiding any chance I had of taking the device back to get a new one. It didn't work, so I'm stuck. The commentor has since come back and said it didn't fix the issue. Thanks for that .
I have an MW600 and I use it with no problems at all. Works perfectly. I have it paired with both my Samsung Omnia 7 and my old Sony Ericsson W610i.
The first pairing took me a while (some pairing codes blah blah), but after that, it's been really smooth. Just switch on bluetooth and the MW600 and they are automatically connected.
Of course, the song name etc does not show up on MW600's display -- I think that's restricted to Sony phone (my old W610i does that perfectly!).
Hope this helps.
I believe based on other peoples experiences there is a Bluetooth hardware problem with early examples of the Omnia 7. You probably have a later one where everything is fixed.
Oh and the reason the MW600's display doesn't show any info is because WP7 only supports version 1.0 of the AVRCP profile, so track info is not transmitted. I've used the MW600 with my old HTC Diamond and Touch Pro2 and got the track info to display. I'm hoping the profile will be updated by Microsoft at some point.
Supported profiles: http://support.microsoft.com/kb/2449475
Well, I jsut got a new 16 GB version last week and I have bluetooth problems as well. even after Nodo they still exist. I have a Parrot Minislim kit and my phone will find it and try to connect. I enter the PIN and hit "done" . It then tries to connect but doesnt. AM bringing it to a service centre tomorrow and will see what they do there.
Update on Bluetooth
17-apg said:
Well, I jsut got a new 16 GB version last week and I have bluetooth problems as well. even after Nodo they still exist. I have a Parrot Minislim kit and my phone will find it and try to connect. I enter the PIN and hit "done" . It then tries to connect but doesnt. AM bringing it to a service centre tomorrow and will see what they do there.
Click to expand...
Click to collapse
Well, I brought it to the Carphone Warehouse who are the service agents for Samsung and guess what , they cannot send it back for repair because they have no "PLU" in their system for this model citing that they do not offer it in their catalogue. They have told me this 2 weeks after I left in in with them. Now, I have got to get it back from them and send to Samsung myself. Like others here I must have an early model because it is doing the same things, sometimes connecting to my Parrot MiniSlim kit and sometimes not. I bought a 16GB version from Germany because I wanted an unbranded and unlocked version with this amount of memory.