Hi, does anyone know how to select the predictive text that pops up whilst typing from the hardware keyboard on the Wizard?
At the moment I can seemingly only select it by click on the screen with the stylus, which is rather inconvienient when thumb typing.
I have scoured the posts for a mention of this but to no avail, so apologies is this is a regular!
Thanks.
I did it once by accident and forget the key stroke. But I am thinking it was either a press of the tab key or the down arrow to get into the matching word list, then an enter to select the word...
Other things I found.
Pressing the red dot twice will lock the keyboard in this mode, two preses gets it unlocked. Good for entering a string of numbers.
Same pressing twice of the shift key will shift lock the keyboard. Same deal pressing twice unlocks.
You simply press the down arrow to select the word then enter? Does that not work? I seem to remember that being how it was done but I've had PT off for a while now...
That's the one!
Much obliged.
Does anyone know how to disable the predictive test? I find it more anoying than anything else.
FreakinSyco said:
Does anyone know how to disable the predictive test? I find it more anoying than anything else.
Click to expand...
Click to collapse
Start -> Settings -> Input -> Word Completion -> Untick "Suggest words..."
Simple.
Just look around all the other apps in Settings, you might learn a thing or ten
Does anyone know how to delete suggestions that come up? I have noticed that too often mispelled suggestions come up with predictive text, which I think "learns" from typos that I too often make.
http://wiki.xda-developers.com/index.php?pagename=Changing_Device_Language
User suggested words dictionary
In addition to the system dictionaries for the suggested words, there is also a user-defined one, compiled by Windows Mobile dynamically. The location of this file is in: "\Windows\dyncompdict.dat". This file can safely be deleted. Editing the contents of this file is more difficul, please see the following for a useful application to generate a new one:
http://www.hollmen.dk/mikppc.htm
Click to expand...
Click to collapse
I've become the proud owner of a Touch HD just yesterday. The thing I find oddest about it so far is that I don't get any word completion pop-ups as I enter text. I'm not talking about just the HTC-specific input methods either; it doesn't happen even when I use the Letter Recognizer or the standard Windows Mobile keyboard.
I've turned on all options I could find that looked remotely related to this, and I have yet to see a single word completion pop-up since I got this device. Am I missing something or are those pop-ups not available on this device for some reason?
guney said:
I've become the proud owner of a Touch HD just yesterday. The thing I find oddest about it so far is that I don't get any word completion pop-ups as I enter text. I'm not talking about just the HTC-specific input methods either; it doesn't happen even when I use the Letter Recognizer or the standard Windows Mobile keyboard.
I've turned on all options I could find that looked remotely related to this, and I have yet to see a single word completion pop-up since I got this device. Am I missing something or are those pop-ups not available on this device for some reason?
Click to expand...
Click to collapse
i can't speak for all methods, but i always use HTC's FULL QWERTY, you just need to "flick the switch" from "ABC" to "T9", this switch is somewhere to the left of the space bar. hope that helps
buggybug0 said:
i can't speak for all methods, but i always use HTC's FULL QWERTY, you just need to "flick the switch" from "ABC" to "T9", this switch is somewhere to the left of the space bar. hope that helps
Click to expand...
Click to collapse
Thanks. Just tried it, but that's not what I'm talking about. If you haven't used another Windows Mobile device before (and Palms using graffitti used to have this too, I think), you might not have seen this, but when writing on the keyboard or letter recognizer (or block recognizer), WM pops up a menu of completion options after you type in one or a few letters (depending on your settings). For example, if you type "ob" you might get a list that contains "obese, obstruct, obvious"; and when you add a "v" to make it "obv", the list would refresh to show "obviate, obvious", etc.
What you've described to me is just the T9 guessing mechanism, which always suggests options with the same number of letters as the number of keys you've typed to that point. It only makes sense when there is more than one letter per key, so that, when you type, say, a sequence of three keys, there is ambiguity in which combination of the multiple letters on each of those three keys you might have meant, and the device shows you options of these combinations to pick from.
Incidentally (and this may sound pedantic, but), for that same reason, I don't see any point in using the T9 setting with the full QWERTY keyboard as you suggest, since there is no such ambiguity and the option that you'll see suggested is precisely what you've typed anyway.
If you've seen the other kind of completion options (i.e., "complete words for partial typing") let me know...
guney said:
What you've described to me is just the T9 guessing mechanism, which always suggests options with the same number of letters as the number of keys you've typed to that point.
Click to expand...
Click to collapse
I'm sorry. I noticed that what I typed above wasn't correct.
I wasn't seeing full word completion suggestions in response to partially typed in words in T9 mode because I had the "word completion in T9 mode" option under "T9 Settings" disabled. Enabling it does provide full word completion suggestions after typing only a couple of keys. I stand corrected.
On the other hand, that's still not what I'm looking for, because that only provides a couple of options displayed horizontally on one line. You can't fit many word options onto that line. (At least not the longer ones.) I'd like to see the standard Windows Mobile behavior of popping up a menu of vertically stacked completion options where you may be presented with up to four selections of any length (sometimes including even multi-word completion options). The HTC-specific input methods with their own peculiar completion behavior are fine by me, but I don't understand why I don't still have the default Windows Mobile completion behavior when I switch to one of the standard Windows Mobile input methods!
Actually, even the HTC-specific input behavior is a little screwy. There's also a "word completion in ABC mode" option under T9 Settings, but even when I enable that, I get no word completion options after switching to ABC mode in the compact QWERTY or full QWERTY input methods...
A few things definitely seem wrong with word completion behavior on the Touch HD. I just hope someone here might have enough insight into the matter to know of a fix or workaround...
guney said:
Actually, even the HTC-specific input behavior is a little screwy. There's also a "word completion in ABC mode" option under T9 Settings, but even when I enable that, I get no word completion options after switching to ABC mode in the compact QWERTY or full QWERTY input methods...
Click to expand...
Click to collapse
Scratch that... I've seen this work now too. I suppose it was a little stubborn, or needed a close-and-reopen of the keyboard first...
In any case, my original issue still stands: I'm looking for the "plain old" Windows Mobile word completion suggestion pop-up when using letter recognizer or the standard keyboard, with the vertical list, which fits more options of longer words.
If anyone knows of its whereabouts, please chime in!
guney said:
A few things definitely seem wrong with word completion behavior on the Touch HD. I just hope someone here might have enough insight into the matter to know of a fix or workaround...
Click to expand...
Click to collapse
I was about to start a post just like yours..I've enabled word completion but I don't see anything. Also, when I open the tool Dictionary Editor I don't see any suggested words at all. And when I add one or two of my own, it still don't work. There must be someone who knows more about this issue ???
bump...this would be helpful
also, does anyone know how to make it so T9 starts suggesting words after typing only 1 letter?
Copied from the Diamond Forum ...
beemerTPPC said:
IMPORTANT: previously be sure that HKLM\Software\Tegic\eT9\XT9SupportMSSip has a value of 0.
Simply change these two registry keys under:
HKLM\system\currentcontrolset\control\layouts\e 0010409
Ime File : \windows\xt9ime.dll change to Ime File :\windows\compime.dll
and
Layout Text : XT9 IME change to Layout Text : COMP IME
And soft reset.
Click to expand...
Click to collapse
... this should fix the problem. Kudos to beemerTPPC.
Gave to above a go, but found those settings were already there!
But strangely, after a couple of soft off/ons the letter recogniser, block recogniser, standard keyboard and SPB keyboard all have word completion.
The HTC offerings are weirdly different;
The full qwerty only offers word completion when you type the first three letters of a word then hit backspace to delete the last character typed. The same happens with the compact qwerty and phone keypad, but rather madly they will not let me type letters at all... only numbers... very odd!
The above solution enables me to have the Word Completion popup witth the following keyboards: 'keyboard' and 'block recognizer' and 'letter recognizer'.
It is not supported with the 'Full QWERTY' (my main keyboard).It removed the T9 completion that was there (and was not adequet). Now I cannnot use both ABC and T9 modes.
Is there a way to have both the T9 and the word complete popup, or at least the latter (the ppopup word complete) when in ABC mode on the 'Full QWERTY' keybord?
Please advice
Thanks
gadgetuk437 said:
Gave to above a go, but found those settings were already there!
But strangely, after a couple of soft off/ons the letter recogniser, block recogniser, standard keyboard and SPB keyboard all have word completion.
The HTC offerings are weirdly different;
The full qwerty only offers word completion when you type the first three letters of a word then hit backspace to delete the last character typed. The same happens with the compact qwerty and phone keypad, but rather madly they will not let me type letters at all... only numbers... very odd!
Click to expand...
Click to collapse
I am in the same boat as you
How are you going with this Monkey of a problem?
Ive tried everything.
Please reply
Run HD Tweak
20. Keyboard (SIP)
20.2 T9 Mode
set it to Disabled
Soft reset
HTH
Hi,
has anyone noticed (or maybe not having the same problem as me) that when using phonepad in T9 mode and writing messages, it doesn't remember the words that you have selected.
for example HE uses the same letters as IF, now...on my old HD, if I typed HE and then selected HE from the list, then type HE again and selected it from the list, next time I typed the keys for HE, the phone would remember that I have used HE the most and HE wold be the fist option in the list....I've done this countless time, but HE is still 5th or 6th in the list of words (ID, which isn't even a word is always first)
as a side issue, one of the first things I always do is edit the T9 dictionary to add my name and other words etc following this..the T9 doesn't remember any new words that I add (I thought it as supposed to do this automatically?)
thanks for reading
Same here
I ve turned T9 of due to this
actually it does.
I had this problem before and only a bit of playing around worked.
Basically, you need to go in to text input settings (can be done from the keyboard pop up menu) and turn ALL the XT9 settings on (i think one or two are off by default)
then, when typing something new, simply turn off the t9, write in the new word then tap on it on the suggestions bit and it will save it to your XT9 dictionary.
Bare in mind that for shorter things, it doesnt for some reason.... only really 3 letter words like uni or bro. for these you need to find the xt9 program, open it and add it.
Hope all that makes sense?
Oh and the HE/ID/if thing sorts itself out after you've selected them about a million times. annoying i know but haven't found a workaround for that.
It does it for me. I've very happy with the way T9 learns from me, even to the point where it's suggesting things like usernames and email addresses when I start typing them.
i was using the letter recogniser input method for the last 3months and it was wonking perfectly. Entering a word, automatically adding a space after the word entered and automatically predicting 5 words i might wanted to write next. That was perfect.
Suddenly though last month the function of automatically adding a space after a word entered disappeared, and i cant get it back. And there is no option to bring it back at all, unless i use a 3rd party keyboard e.g SPB keyboard where it has in the word completion tab, the option to add a space after a word. It is not even an option in the default HTC keyboard.
Is there any way i can get it back? It was really helpfull in my job..
Thanks...
After some search here is the answer to those who might be interested to add this option:
WORD Completion Settings
HKEY_CURRENT_USER\ControlPanel\SIP
"SuggAutoCorr" <- 1 if AutoCorrect or Replace text as you type, 0 if not
"SuggChars" <-Number of letters before suggesting a word/s
"SuggWords" <- Number of Word/s to be suggested, set 0 to disable Word Suggestion
"SuggSpace"-> 1 to add space after suggested word, 0 if not
I'm really enjoying the updated android keyboard and don't think I'm going to install swype on this phone.
What I do not understand is how I can quickly add new words to the dictionary.
I know I can go into the "language and input" settings to add words, but yesterday I manually typed a word that was not in the dictionary and it asked me if I wanted to add it. What did I do different to get it to ask me to add a word to the dictionary? This will be a real time saver in the first weeks of using this device.
rumpleforeskin said:
I'm really enjoying the updated android keyboard and don't think I'm going to install swype on this phone.
What I do not understand is how I can quickly add new words to the dictionary.
I know I can go into the "language and input" settings to add words, but yesterday I manually typed a word that was not in the dictionary and it asked me if I wanted to add it. What did I do different to get it to ask me to add a word to the dictionary? This will be a real time saver in the first weeks of using this device.
Click to expand...
Click to collapse
Type the word, it will appear in the middle of the suggestion bar (correctly recognized words will appear either side), tap on the word in the suggestion bar.
jakejm79 said:
Type the word, it will appear in the middle of the suggestion bar (correctly recognized words will appear either side), tap on the word in the suggestion bar.
Click to expand...
Click to collapse
That's how I suspect it should work, though it only occasionally gives me the "tap word again to add to dictionary" option.
Though I'm noticing a pattern to words it will not add, such as expletives or words with less than 4 letters