Hey guys, i would like to know if it's possible to do a hardreset without activesync cause mine dosent work, think some files are broken.
Can't open my sms, calender and so on. There is a window that pops up and saying: "No program memory available, stop programs and try again. I have a lot of memory over and i do not have any programs running, iw tried soft resets a few times but it dosent help.
//Nille
Active Sync has no relation to doing a hard reset. Just simultaneously press (and keep pressed) the Power Switch and the Camera button while pressing the reset switch with the stylus.
Related
Hi,
Please give me a hand...
I can read text messages' headline only, but I can't read the contents.
Whenever I touch any headline, which shows blank.
Actually it's empty (white screen without format).
And IE was happening as the same case also.
Sigh...
I recently installed a trial version software as a cleaner for release more memories.
I deleted some files and let main memory of 13% free,
but I'm feeling so bewilder that I have making a quite mistake.
I couldn't read webpages on ie and couldn't read any text messages on mailbox,
after I deleted "some lnk files", "the whole directory of GPRS MONITOR
in My Device\Program Files\" on my O2 Atom.
Could any one help me to solve my problem, please? :?
You have to try to reset your device.
Have you tried the soft-reset of your device ?
If that does not work you will have to do a HARD reset.
For soft reset, press the small recessed button at the bottom of the Atom.
For HARD reset (you will lose all your data, but at least you will get back a working Atom), with the Atom OFF, press the small recessed button at the bottom of the Atom AT THE SAME TIME press the power button at the top.
You will be prompted for hard reset press BOTH the CALL and HANGUP buttons.
Last option : Reflash yor ROM.
Re: You have to try to reset your device.
Experimenter said:
Have you tried the soft-reset of your device ?
If that does not work you will have to do a HARD reset.
For soft reset, press the small recessed button at the bottom of the Atom.
For HARD reset (you will lose all your data, but at least you will get back a working Atom), with the Atom OFF, press the small recessed button at the bottom of the Atom AT THE SAME TIME press the power button at the top.
You will be prompted for hard reset press BOTH the CALL and HANGUP buttons.Last option : Reflash yor ROM.
Click to expand...
Click to collapse
:wink: Thanks for your kind reply.
I've already tried soft reset it for many times before I post this message. :?
:roll: I made the hard reset at last....
You're right, at least I can recover my Atom.
hi, after instaling pretty much of applications on my wizard it just stopped respond. if u do a soft reset it boots but freezest on todays screen and thats it. there is a massage dispalied "low memory". i cannot do a hard reset, upgrade rom anything. is there any other way to perform a hard reset ?? (i tried comm mnr+voice+plus soft reste) HELP !!!
cheers, matt
Some people have joy with - turn off - press and hold comm, record and camera buttons and press power on.
If that fails you should be able to flash your device with the same rom. Turn off, press camera button and hold then press power button and bootloader multicolored screen should come up. Connect via usb to pc and reflash rom.
hi
i am facing a problem i want to reset my dopod 818 pro cell phone, i had n virus i want the cell phone to be reset to the factory setting, as i was using the O2 phoe i was reseting the phoen but in this the reset function is something different can u guide for this this. for reseting the phone .
thanking you
mahendra
To do a hard reset:
hold camera and comm manager buttons... keep them held
the press the soft reset button with the stylus
you should get a message, possibly about formatting the memory,
now you can release the cam and comm manager buttons
press the green call button, to format the memory
you should be back to the original operating system, without any other programs..
remember to back up contacts with activsync, and anything else on your ppc, because it will be wiped.
Hi people. having a bit of a crisis. my mini s wont startup any more? it just hands at the 'windows mobile' graphic?
anyone know any genuis solutions to help me get it working again?
pretty please *crying*
mark
Have you tried to give it some time? When i had old version of Polish official WM5 ROM from Era operator, my Wizard took more than 5 minutes to boot (instead of less than a minute with newer ROM). Also, sometimes it did hang in the process. What seemed to help (though i have no idea why) was not allowing the backlight to go off by tapping the screen once in a while during the boot process.
left it on, with charger plugged in to maintain juice all morning and its not gone any further
And how about keeping the device awake - tapping the screen during boot process?
it stays permanently awake from reset
What i meant, is that when my device booted, after a while the backlight went off. if i didn't tap the screen to turn it back on, the device simply hung. Then again, that was probably just a problem of my ROM/software combination, since i never saw anyone else describing such problem. If you have your data backed up, you might try a hard reset, if not, maybe someone else can give you a bit more useful advice
it just stays on. no tapping required.
is a hard reset the same as holding down the power button til it turns off because ive done that a few times now
any suggestions?
nope, hard reset is holding the comm manager and voice memo buttons pressed and pressing the side reset button. Keep these buttons down until you get a question if you want to restore your factory defaults (you'll have to press the call button if you do). Be arare that you'll lose all the data on your phone (those on the storage card will stay intact) - all the files, contacts, messages. I hope you have a backup of those...
strangely enough, held down those three buttons and instead of asking me to hard reset it vibrated and then popped the txt mesages screen up?
very bizare
must have been retaining the boot graphic on top of the apps?
thanks for the help!
mark
Well, i must admit - that sure is odd.
there is another way to hard reset - turn off your device completely (holding the power button for a few secs, and answer the popup message asking if you want to power down "yes" (from your earlier posts i understand that it worked). When the phone is completely off (no LED blinking), press the two side buttons i mentioned earlier (voice command and comm manager) and while holding them power the phone up just as you normally do - by power button. Keep both side buttons down until you get the question about resetting. If you hold the buttons and it gets to the windows mobile screen, then one of them might be faulty.
[EDIT]
I just thought o0f something else - if the SMS window pops up, it would mean that the device is actually booted, so it should connect with activesync. Maybe connecting it to the PC, opening the device's folder, and navigating to /windows/startup folder. Thye problem might be caused by one of the applications run on start, so try moving (not deleting) all items from startup to some location on your PC. Then do a soft reset (the reset button on the side). If it boots, post the list of apps you had in startup, maybe we can figure out which one was causing trouble and put all others back to startup. If not, then the problem is somewhere deeper in the system, and a hard reset will probably be necessary.
[/EDIT]
Hello to all of you... I have a Mega...I actived the wlan and my phone got stuck...I turned it off and now, when i turn it back on, it hangs on the 'insert pin' screen...i removed my simcard but the same happens...i click 'cancel' and I can see that wlan is still on..an my phone is still stuck..it doesn't connect via active sync, i can see only my sd-card...i have some cntacts i would like to save from the phone's memory, but if i can't do it, i will perform a hard reset..so i'm asking you...do you happen to know how to save my contatcs??? thanks!
After hours of searching, i found out what happened to my phone..It got "Newton's ring" (an oily rectangular shape in on the display)
http://forum.xda-developers.com/showthread.php?t=591292
And it's met on the Touch Pro, Diamond and others...
I think I'll send it to warranty...
I'm not really sure but you can try a hard reset:
Hard Reset
1. Power Off the phone.
2. Press Both Volume UP & DOWN Keys together.
3. Keeping the keys pressed, power up the phone.
4. The screen will display a message.
5. Press the Volume UP Key.