I am having a very strange problem on my Cingular 8125 with the original ROM and WM5. The same problem appears on my colleagues Ipaq PDA which he recently upgraded to WM5. The IT Manager's Ipaq PDA doesn't show this problem. Here is my problem...
In the Server Configuration under Activesync, we have to put in the string
https:// and after doing that Activesync connects to the Exchange 2003 server and downloads all my emails correctly. I disconnect the USB cable from my laptop or if I put my phone to standby and then reconnect, I see that the https:// string is missing from the server name though the rest of the name is still there. Our config requires SSL and use RPC over HTTP (whatever that means).
Any suggestions?
you don't need to enter in the https:// part because if you check the box in AS for "This server requires an ecrypted (SSL) connection" it will automatically assume https://
(Open active sync---menu---configure server) - On PDA
(Open active sync---Tools Config Server Source) - On desktop
lvlolvlo said:
you don't need to enter in the https:// part because if you check the box in AS for "This server requires an ecrypted (SSL) connection" it will automatically assume https://
(Open active sync---menu---configure server) - On PDA
(Open active sync---Tools Config Server Source) - On desktop
Click to expand...
Click to collapse
What you are saying makes sense. However, the problem we started with was - keeping the setting without the https://, I tested the following scenarios:
1. Connect via wifi to work network: Activesync works and gets the emails from OWA server.
2. Connect via wifi at home: Activesync fails giving the 80072f0d error which says "The security certificate in the server is invalid. Contact your Exchange Server administrator or ISP to install a valid certificate on the server.".
3. Connect via USB or IR or Bluetooth to the laptop which is connected to the work network (wired LAN): I get exactly the same error.
To resolve this, IT suggested to put the https:// prefix in front of the server name and we found that it works. But, then we got the new problem as it doesn't save the prefix (which I think it shouldn't as SSL is checked). The question is - why including that helps? Also, why does it allow the IT Manager's Ipaq to save the prefix? We compared and he has the same build of WM5 on his Ipaq.
Thanks for the all ths suggestions.
You should install the certificate on the device. The SSL certificate that is.....
go to the site where your exchange owa then export the certificate....
transfer the certificate to your pda
install the certificate to your pda
now you should be straightened out.....
Importing certificate didn't work
I imported the Verisign certificate into my phone, but I still get the same error. See the image below showing that the certicate has been installed correctly:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Related
Hi there,
i need some help with the topic mentioned above. I read a lot through this forum and the Internet but couldnt get any clue how to achieve it. I actually want to use MSN and ICQ via ActiveSync/BT
I have a German O² XDA mini with R1.12.00, G1337.42, D1.12.01GER (is there a way to update the ROM? This german document on the xda developer ftp isnt available). I am running XP Home with SP2 and use a MSI BT Stick.
It seems that the key uses tis BlueSolei Software from ITV from this thread:
http://forum.xda-developers.com/viewtopic.php?t=18537
but i cant manage to get ActiveSnyc running... my XDA and Windows are pairing but i cant sync...
I am also too noobish to configure my COM Ports in the Pocket PC. They are always blank, so i cant choose any ports?!
When i sync with the ppc sync tool it says:
Connection cant be established. Check dfü & proxy settings and. Then Try again...
Thanks in Advance...
smurf
same Problem.
Can anyone help please ?
ok, i solved my problem. Dont know exactly how but i can post what i did...
First i deleted all COM ports in the Device Manager of windows (except COM1&2). I deinstalled my BT Stick and restarted Windows.
i then installed the bt stick again and then installed and deinstalled this bluesolei software for ppc about 10 times :evil:
after that everthing worked fine. AS over BT, MSN, ICQ, PAN and so on...
....
I tried to Install the PPC software on the magician but it installs only on the pc and not on the PPC,
where did you download the software for PPC ?
Theres an excellent guide for this over at Modaco in the smartphone forums somwehere.
The method is exactly the same, i did it on my MDA and it worked flawlessly! Just follow the procedure to the letter... even including restarts!
The thing is when I try to install the software on my ppc it's not really installed.
when the installation process is over it pops up the AS add/remove winow saying that the app would be downloaded next time I connect it (when it's connected already), so I disconnect and reconnect it
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
reply yes and then it just closes without installing anything on the PPC..
Finally got this this going !
Guys, you don't actually need the bluesoil stack to have messaging and internet over bluetooth. I have a guide here that will tell you everything you need to know about setting up active sync over bluetooth (which let's you access the net) including how to remove hidden com ports on your PC if your port number for active sync is above 9.
guys i have a big problem syncing my wizard contacts to my outlook.
I never used the sync before but i was gonna copy my contacts because im gonna install the new rom.
anyway
USING ACTIVESYNC 4.1(re installed again after this problem nothing changed)(also reinstalled the office 2003)
please bear with me, the problem is when i connect the phone to the pc activesync tries to sync
it gives an error which is this
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I think the problem is this
Synchronization Fails because ActiveSync is incorrectly registered with Outlook but idont know how to fix it
this is a really awful problem for me i would appreciate your help mates.
This isn't really a fix for your activesync, but there is another way to keep your contacts after a rom update. There is a file called pim.vol in your root directory. this has your contacts, calendar and some other stuff. copy it to your storage card before you update, then replace the new one thats there after the update. Soft reset and everything will be there. I don't think the stock file explorer will let you do this, try total commander or resco explorer.
thank you very much!
any ideas why activesync is doing this???
Which version of activesynch is it and did you look at the MS site?
http://www.microsoft.com/windowsmobile/help/activesync/default.mspx
Synchronization Error 85010014
ActiveSync reports a Synchronization Error code 85010014 because of one of the following reasons:
Synchronization Fails because Application Data Folder is Redirected
Synchronization Fails because Outlook is in Offline Mode
Synchronization Fails because of Outlook script blocking
Synchronization Fails because ActiveSync is incorrectly registered with Outlook
Click to expand...
Click to collapse
PaulK_CMF said:
Synchronization Error 85010014
ActiveSync reports a Synchronization Error code 85010014 because of one of the following reasons:
Synchronization Fails because ActiveSync is incorrectly registered with Outlook
Click to expand...
Click to collapse
Click to expand...
Click to collapse
thank you for your response
it was giving this error at first couple of times and then it change to that picture
so my problem is it is incorrectly registered with outlook.
any ideas how to fix this?
UP!!
please help.
can't upgrade the rom because of this
also reinstalled the office 2003
Edyhan said:
UP!!
please help.
can't upgrade the rom because of this
also reinstalled the office 2003
Click to expand...
Click to collapse
i looks like you have a .pst file Corrupted try to delete your .pst file in outlook,you will lose all the settings and data from outlook .
also try this;
http://forum.xda-developers.com/viewtopic.php?t=51649&highlight=
Ok fixed it
a format fixes everything
I think outlook is my problem too
I am having similar difficulties. I will try what you suggest - thanks!
give this a try... http://www.palm.com/us/support/downloads/usbswitch/index.html
In the latest ActiveSync 4.5 Beta2 there is an option to get device Certificates (Tools, Advanced Tools, Get Device Certificates). In this menu is also Active Information Rights Management, however both of them are greyed out and cannot be selected. In the help there are details about what these are and how to use them, but they obviously don't work. I assume from the help the PC must be a member of an Active Directory network (mine is).
Does anyone know if these features are disabled due to this being a Beta release of ActiveSync or are there some changes that have to be made to AD to get them working? There is little information on Microsofts website.
Andy
A quick update on this and a request for some assistance from people running any version of WM6 on their Wizard please.
I have been informed that the 'Get Device Certificates' option only works with WM6 devices and NOT WM5. Since I haven't taken the plunge and installed any of the WM6 ROMs that are floating around can someone check whether this option is available when running ActiveSync 4.5 (final release NOT the Beta).
I think your PC will need to be on an AD Network with a CA installed - I can't verify if this is the case since the Help file and any information I can find on the web is pretty limited.
Can anyone running Vista check what options there are for Certificate Enrollment in the Mobile Device Centre?
Thanks
Andy
Anyone please?
For anyone who is interested the 'Get Device Certificates' does work when the attached device is running WM6...... You also need to be on an AD network with a CA installed in it since the certificates that are listed are all the templates that are installed in AD.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I have sucessfully enrolled my Wizard running WM6 for the ClientAuth and User certificates. This is much more friendlier and flexible than the enrollment utility included with the device (though not really any easier).
Andy
What is an AD? How about a CA? Thanks. I'm trying to use this tool because the wifi on my titan is really flakey and I'm hoping it won't be after I've installed the correct certificates.
SlamDance said:
What is an AD? How about a CA? Thanks. I'm trying to use this tool because the wifi on my titan is really flakey and I'm hoping it won't be after I've installed the correct certificates.
Click to expand...
Click to collapse
AD is M$'s Active Directory - As far as I know the 'Get Device Certificates' from ActiveSync only works in a M$ Active Directory environment with an AD-integrated Certificate Authority (CA) Server where the PC that is running ActiveSync is a member of an AD Domain. If you don't have AD & a CA then this won't work for you.
There are other Certificate Enrollment tools - HTC provide one with their devices, however most of these only Enroll against a M$ CA. I found this page a while ago:
http://www.jacco2.dds.nl/networking/pfximprt.html
This allows you to import certificates on WM5/6, I have never used it though as I have an AD environment.
HTH
Andy
Hi,
Is there any way to use the terminal server client to use different port numbers. I have terminal servers that use non standard as well as default ports, we change to get though firewalls ect. I know you can change the default listener port, is there anyway to enter the port number from the TS interface, in the windows world I would just enter servername:2323 and it would use port 2323.. Any ideas?
With the WM6 version of Remote Desktop you can enter the URL/IP Address followed by a colon and then the port number, but not in WM5.
You could try and install the WM6 version that's attached, although I haven't tried it on WM5. (DO SO AT YOUR OWN RISK, ETC)
What you can do with the WM5 version of RDP is
1. Copy and paste the default RDP Shortcut on the PPC and rename it with any name describing the server you want to connect to.
2. Run the new RDP shortcut and then use the Running Programs tab in the Start > Settings > System tab > Memory app to actually stop RDP. (This creates the necessary registry entries.)
3. Edit the following registry key on the PPC.
[HKEY_CURRENT_USER\Software\Microsoft\Terminal Server Client\<NEW SHORTCUT NAME>]
Add a DWORD value named "Server Port" and enter the new port number
you want to use.
For what it's worth, the WM6 version allows automatic login and is far more responsive.
Terminal Server
Thanks!! The WM6 works great, one note it doesn't replace the old version. Just had to create a shortcut to the new version and it works with no problems.
hey, i´ve got some questions,
The Lazy Slug said:
1. Copy and paste the default RDP Shortcut on the PPC and rename it with any name describing the server you want to connect to.
Click to expand...
Click to collapse
i copied the original wptsc.exe and renamed it to exampletsc.exe and started it. i stoped it as you describe and checked the registry for the keys but i can´t find a new folder with the name of the new rdp file... i can only find and edit the default folder.
The Lazy Slug said:
For what it's worth, the WM6 version allows automatic login and is far more responsive.
Click to expand...
Click to collapse
hey, how can i turn on the auto login function? and if, where do i have to put the data (server, username, passwort)? in the rigistry?
thank you!
Thanks for Remote desktop software. I am now able to connect to my Desktop PC with my HTC Touch (WM6). But I can connect only through data cable. Can i connect through wifi. I am already browsing internet in my Pocket PC through wifi through my above Desktop PC's Internet connection. Pl suggest. Thanks
still cant connect
guys
first of all thanks for the new cab file
i am using new wm6 with the software given...
but stillcant connect
its says invalid IP or computer name.. or a network error ocured.
while i am ableto access the computer using lan connection.
can not install
hi,
I downloaded the files, when trying to install, in my WM 6.0 its saying u donot have enough permission. pls help
thanks
Partha
partha06 said:
hi,
when trying to install, in my WM 6.0 its saying u donot have enough permission.
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
mike2089 said:
Thanks!! The WM6 works great, one note it doesn't replace the old version. Just had to create a shortcut to the new version and it works with no problems.
Click to expand...
Click to collapse
does not work on wm 6.5, crashed abut ui
Hi all! This is a thread for the linux lovers aut there...
I have a hTC Touch Diamond with WinMo 6.1 and I want to remotely connect it to my ubuntu desktop.
DETAILS:
-my ubuntu connects to the internet through a (MSI) router that has a PPPoE connection
-I set up the Remote Desktop in ubuntu and got something like "Your desktop is only reachable over the local network. Others can access your computer using the address 192.168.x.xxx , x.local."
-Then I noticed that "192.168.1.100" was a link to "vnc://192.168.x.xxx::5000"
-Also the "x.local" was a link to "vnc://x.local::5000"
-I already have a VNC client for PocketPC (link below) but don't know how to use it...
-my PDA connects to the internet through a (orange)3G-connection
- oh...and yes...I'd like to remote connect NOT only from the local network!
If someone already got this kind of connection working, please,please share.
Thanks!
over&out
yes you need the client on the pda and the vnc server on your linux box
if you want to be able to use it over the internet thats just a setup thing for your lan network vnc works the same no matter what the client is running on
pda, another pc a mac you name it
suggest you read up on how you setup the vnc server and client
and get it to work on your lan and then move on getting all the ports opened and or directed so your router don't block it and it should work over the internet without an probs
http://en.wikipedia.org/wiki/Virtual_Network_Computing good place to start reading
First of all, you must forward ports (5900 and 0) on your router.
Later in system preferences you'll wind remote desktop settings
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Setup your password, reboot the router and voila!
In VNCViewer for ppc type your ip : no 192. or 10. but the one you can find ex. here :
http://www.ip-adress.com/
So, your IP::5900 and below type your password, click connect and wait for your ubuntu desktop appear.
DONE! this is how I did it
ok! After some searching/learning/trying I finally got it working. Here is how you do it:
NOTES:
- PDA: hTC Touch Diamond with custom ROM (DiaDuit)
- PC: LinuxMint 8 (based on ubuntu 9.10 karmic koala)
- internet connection (PC): through a MSI wireless router
- internet connection (PDA): orange 3G (my provider)
1. get the VNC Client (for PDA) from below this post (vncviewer).
2. set your linux box:
- press ALT+F2 to open the "Run App" dialog
- enter "gconftool -u /desktop/gnome/remote_access/network_interface" and hit RUN
(if you don't have a karmic based linux see this for help: https://help.ubuntu.com/community/VNC/Servers)
- configure the Vino application (this is the default VNC server in ubuntu based distros): http://www.debianadmin.com/remote-desktop-sharing-in-ubuntu.html
3. configure your router (if you have one): just forward the ports 5800 and 5900 for your local IP (mine is 192.168.1.100). You can use other ports; just have to change these default ones in vncviewer and ofcourse to forward them properly.
4. find your external IP (http://www.ip-adress.com/) and enter it in the vncviewer. Type your password. Hit ENTER!
5. scare your girlfriend and make her think the computer is possessed. (Well...in fact it is ! )
Feel free to ask me about anything I failed to explain.
Hi marginean.m,
your attached file seems to be corrupt. Can you upload it again?
Thanks!
it's not a rare file you can get it without using his attachment
http://www.google.com/search?source...ewer.zip&meta=lr=&aq=f&aqi=&aql=&oq=&gs_rfai=
mdajj said:
Hi marginean.m,
your attached file seems to be corrupt. Can you upload it again?
Thanks!
Click to expand...
Click to collapse
Here it is!