Guys,
Ever since i upgreaded to the new rom from the cingular, my wifi wont work unless i reset the router, which means none of the hotspots work for me, or my work wifi. My wizard still detects all the available networks but wont connect it. so also my question is was there a major hack or registry edit in the wifi section in the new ROM 2.17, since it wont work for me ever since i upgraded to the newest one.
FYI i did flash it back to cingular and it works fine, then back to 2.17 and it wont work.
Thanks alot
Related
Hi. The Wi-fi on my G1 has stopped working.
I rooted my phone with the RC9 uk version by JF. I had no problems connecting to encrypted network.
I tried moving apps onto sd card and ran into problems so I wiped my phone and reset everything.
I cannot connect anymore on open or encrypted network. I can view it and when I try and connect it, it try's to obtain ip address and then fails!!?
Any ideas? Thanks
Hi
Does anyone think it's worth flashing back to the original version? I suspect not because it worked ok on the jf version I have but don't know what else to try?
I will try another wireless network at work today.
If my phone is picking up the network but not connect sound like a hardware problem or just a software one do you think?
Thanks
I had a similar problem but it was a router issue. I would def try another router before blaming the phone.
Ok. I just tried another router at work with an open network and its still the same. Shall I flash the phone do you think. Don't really want to do it again but I use the wifi network a lot and I am worried it could be hardware.
Thanks
well if you flash it and still have the problem then its hardware based. So nothing can hurt from flashing
I re flashed with latest version rc9 jf version and now working again. Thank you neoob
I flashed to the 6.5 rom listed here and things were going okay. Lately Ive been having problems with the phone freezing and text messages not working as they should. I want to flash back to the 6.1 firmware however Im looking to still tether my phone so is there any way to get the Internet Sharing program on the device or something close to that wmifirouter didnt work too well for me. So any ideas on what could cause the problem in the first place or how to unlock the tethering on the 6.1 firmware.
So, I got this 6800 from a friend of mine along with a 6700 ( with a very bad battery ), figuring that I am going to develop software for 6.0 I went with the 6800 for the Rom Upgrade. I had the original Qwest Rom on here
Software Version 2.13.656.2
Firmware Version 1.39.00
I went ahead and followed the Ryan Mogul Cricket flash info ( yes i plan to flash this to cricket also ) however sadly before I installed his cricket ROM, i went ahead and followed the instructions for the NUERom2_5049 and after the flash ( done via laptop/activesync connection ), the phone seemed to be bricked. I tried every trick in the book from using the 1G MicroSD card that I have with the ROm on it ( considering the 4G wouldnt work at all ), and couldnt get anywhere.
I also tried flashing Sprint/Alltel/VZW Roms without success, I finally came across the Stock Rom ( Upgrade ) frm Qwest, ran it from Laptop, worked like a charm.
OK now for the questions... Here is some quick info about the new rom. It is Software Version 3.35.656.2, and the Firmware Version is 3.37.20 . At this point I am considering a couple of options.
1. leave the working rom on here and just play with the registry, settings, software, etc.. to get my goal accomplished.
2. Flash this thing over to Ryans Cricket Rom for Mogul ( Hey Ryan if you read this... Is that compatible with the Qwest Mogul?) and go ahead and start the service.
3. Custom Rom, and find a way to get the Cricket info in there.
Also I am using PRL1039 from CK right now, working like a charm so far, I am also wondering if this unit will work on cricket as is if I change some settings.
Just a few things im trying to figure out right now. Along with the ability to get the device to become a Portable Hotspot/ Wireless Adapter ( I now finally have this working as an internet connection....Laptop to PPC via USB Cable, PPC to Netgear Router via WiFi, and im online! Thanks a bunch for anyone with any suggestions, I look forward to seeing what I can do with this device. Also I have the SPL 1040, should I chance it for Cricket?
Thanks in advance!
First thing you want to do is re-do your PST settings to Cricket as the stock ROM changed all of that. Including unlocking your MSL/SPC code to all zeroes and loading a Cricket PRL on there. Follow my Cricket PST settings thread for that. Then you want to remove your memory card and boot up your current ROM into windows mobile and connect to active sync. Make sure its connected you should be able to access the files on the device through your computer and sync icon in taskbar will be green.
Now flash the unlocked bootloader Olipro2.40 exe. You can find that in my htc unlock tools directory on my share site, link provided in my PST settings thread.
After that is all said and done you can flash any Custom ROM including mine. If you use my Cricket ROMs all you have to do is activate the data connection and enter your [email protected], password cricket, blank domain, check save password. Done.
If you use someone elses NON cricket ROM you can always use my Cricket WAP or WAP and Arcsoft CABs to set up the Cricket information for you. Hope this helps.
already redid the spl stuff, still cant seem to get the msl back to 000000 but i do have the correct one. Just got the unit working as a wireless adapter so thats a plus, i need to get this thing over to cricket next, so I can get my account set back up. right now using Skype for phone service sicne I have WiFi. I will try your rom again, Ryan , as soon as I get things going with this again. Thanks for the tips, they seem to be coming in very handy ( been googling your posts for help with this device ) I know the 6700 inside and out but the 6800 seems to be a new dog right now, been playign with it for a while, got alot figured out, but still more to learn. Thanks again
ok just to update a bit, ive made a few slight changes, got a few new accessories, and tweaked out a few settings, however, all this and i still havent gotten the MSL back to 000000. Any ideas at all, tutorials, walkthroughs, hits, tips, tricks, or otherwise step-by-step directions so i can get that back to 000000 insead of the 6 digit code it is now, then maybe *2/228 will work and i can actually use the data features. Thanks in advance.
hello guys, I have a HTC Touch HD and I have a problem with wifi networks .. I flashed the 'hardspl 1:56 el' axlor 6.1 as in the guide, but I'm not the most research of networks (not see any network) I tried to put all the radios, but nothing ... not even manually entering the keys wpa or freeing up the network I can not connect ... I tried to restore everything, but the problem persists ... can anyone give me a hand?
i have the same issue !!!!!! any one help please
My wifi connects to networks but the phone doesn`t browse the internet.I`m sure it has something to do with some setings but I don`t know what.Can anyone help?
without further information it is impossible to help you. what kind of network is it, how is it encrypted? what rom/radio rom are you running? is it your private network? do you have the key for it? what are your settings that you suspect of making it not work for you?
It`s a student public network on my faculty.It`s open for everyone to use.And they use it without any "encription" or password.
Bought my phone used.I guess it was all set to work, but I installed some rubish I couldn`t delete...rest of it you can predict.
I returned my phone to factory setings, and since then wifi doesn`t work.Everything else works.
OS 5.2.21855(21855.5.0.85)
manila version 2.5.19211619.0
Radio version 1.09.25.14
Thank you very much in advance!
ok, that is something to work with. your rom is not a shipped one, and from the version number, i can't tell, who cooked it and how old it is. however, it might be a common bug of that rom that wi-fi doesn't work properly. also, your radio is fairly uncommon, most people these days use the latest radio 1.17.29, which can be found on the forum. remember to perform a hard reset after flashing another rom or radio rom. in general, one can assume, that, once you flashed a shipped rom and the latest radio, the software on the phone is as it should be, and if wi-fi doesn't work then, it might actually be physically broken.
im currently running trigger 3.2 with nothing else (no special kernels or themes or anything) and recently I have not been able to establish an internet connection over 3G. I have only been able to do it over wifi. I went to the tmobile store and the guy told me that since it was rooted he couldnt help me but to ask you guys instead. so heres my question:
is this problem because of my phone or because of my rom? im hoping its just the rom so i can flash a diff one but im wondering if anyone has a solution to it or anything like that.
Wireless&network> Mobile network> APN. Make sure T-Mobile's detailed are checked, as in there's a green dot next to the APN. Reboot afterwards.
Try reflashing just the modem first before you resort to a whole ROM flash. KB5 is really picky with sending/recieving data on my Vibrant, and I had to flash the KA6 modem to get it to work well.