I need to print PDF's to a bluetooth printer...i have tried printboy but it reformats my document and it is essentially unuseable...i tried clearview and the PDF is not visible unless I bring it into active sync first to allow it to create tags on the PDF.
Adobe Reader 2.0 for Pocket PC. I can view the document but the print button it greyed. What gives?
I would be fine with IR printing but it fails every time I fire a document.
Oh I have the Verizon 6700 version of the Wizard.
Thanks in advance to anyone who can help I have been searching on and off for a week and it is driving me insane....
did you try following program?
JETCET PRINT
http://www.westtek.com/pocketpc/jetcet/
Yes i tried that software. I also tried it along with the Clearvue Pro. When I try to view the PDF in Clearvue it is blank. If I bring the same PDF in via Active Sync then it mentions that the PDF is untagged and if I would like it to attempt to tag. Once I run it through this I can see it and print.
The problem with this is that people in the field will be using this and they wont have access to Active Sync. They have to download the PDF and print on the fly.
Did you try using the adobe ppc pdf reader instead of clearvue? I think it is free. Also I think HP has some printer software/drivers. Dont know if it will work but worth a try.
Yes, I have tried Adobe Acrobat also the print button is greyed. I am trying to figure out how to activate it and have been on ADOBE's site in the forums but no one seems to know...also I tried to get the HP drivers but cant find them anymore. They say something on the site about discontinuing the drivers after Oct of 2005 or something.
If anyone has an idea how I can ungrey that print button or get the HP drivers it would be great. I can view my PDF perfect in ADOBE I just cant print.
Thanks again i really apreciate any help and I really need to get this working!
here is a link to download the hp mobile printing 4.0
http://www.pocket4you.com/freeware/index.php?vypis=jedno&id=199
Hope it works for you.
Great! I am downloading now. Thanks a million I will let you know how it works out!
hp mobile printing won't work because you're running WM5.
You may want to try this. It's expensive, but it may work for you. It has a 15 day trial period too.
http://www.bachmannsoftware.com/pbce.htm
Justin
Ok well I installed it but it doesn't seem to install properly. It gives me an error that it may not work properly because it was designed for a previous version of Windows Mobile. I am of course using Windows Mobile 5.
Any ideas or suggestions?
Any idea how I can get the "Print" button in ADOBE Reader for Pocket PC 2.0 active?
Weatheryoko,
I tried the bachmansoftware solution it is what I called Printboy. It does actually print but the problem is that its sends it somewhere forst where it converts the PDF. When it comes back down and I print it it completely reformats it all out of sequence. It doesn't "Paint" the way I had the report layed out...
I sent them an email this morning to ask them if they could pint me in the right direction as to how it performs this conversion and maybe that will give me insite on how to re-write my report so that the conversion wouldn't affect the content layout so drastically.
Haven't gotten any feedback as of yet from them
lstrike said:
Yes, I have tried Adobe Acrobat also the print button is greyed. I am trying to figure out how to activate it and have been on ADOBE's site in the forums but no one seems to know...also I tried to get the HP drivers but cant find them anymore. They say something on the site about discontinuing the drivers after Oct of 2005 or something.
If anyone has an idea how I can ungrey that print button or get the HP drivers it would be great. I can view my PDF perfect in ADOBE I just cant print.
Thanks again i really apreciate any help and I really need to get this working!
Click to expand...
Click to collapse
On the adobe site it says it works with bluetooth hp printers. Did you try to turn the bluetooth on the wizard on and pair it to the printer? Maybe you can pair the printer and phone using jetcet? Anyways these are some suggestions to try if you already havent. Good luck.
Yeah actually the funny thing is that I am using an HP 450 bluetooth printer...I can the jetcet application comes bundled with Clearvue professional (thats the only way it will print PDF as jetcet by itself doesnt see the PDF's) problem is when I open the PDF in Clearvue it looks blank...
I think it has to do with the fact it is an untagged PDF...
If i take the same PDF and bring it into the handheld using Active Sync it is tagged I can see it and print it...
It is super irritating that Microsoft didn't build native printing functionality into Windows Mobile to begin with...
I am still struggling with this...
Related
Is there a working version of the acrobat reader for windows mobile 5?
My imate Jas-jar came with Clear Vue PDF viewer included. I think it is bundled with WM5 however it does not appear in the programs folder. Try opening a pdf file, and I think you will find it opens in Clear Vue .
ClearVue doesn't seem to open about 75% of my files, which were all created on highest compression... Gotta find a better alternative. I had Picsel on my Palm before that was awesome.
ClearVue is on the companion CD, you need to install it manually.
ClearVue is the most ****ty pdf reader I have tried so far and was the initial reason why I asked for adobe acrobat reader for wm5 in here.
How about adobes own with a VGA hack for force it to high res? this is what i use.
can you be more specific about that vga hack ? Also; iahev tried to install adobes acrobat reader, but had no luck ....
hi
i have working version of acrobat reader, got it from adobe website, here is the link
http://www.adobe.com/products/acrobat/readstep2_mobile.html
Try the one for ARM and X-Scale models
Ok Bye
get tweaks2k and use the 'force vga' thing
Hi,
Have a look at a program called Styletap - apparently it allows you to run Palm OS apps on Windows Mobile v5.
I haven't tried it yet, but I used to own a palm with a few progs so I might give it a go.
It might help you run your old Palm reader.
Regards
Michael
tintoy said:
get tweaks2k and use the 'force vga' thing
Click to expand...
Click to collapse
what does that 'force vga' thing actually do ?
You must download free Adobe 2.0 Version in ENGLISH !
That is the only one, work with the Universal.
All other Lang. are not working !
If it freeze during start, tap sometimes on screen,-it will works !
Adobe's version of Acrobat
Got to go with the Adobe version - sure its bloated and takes the usual age to load each time you start it fresh - but it beats clearview hands down
AgentJ said:
You must download free Adobe 2.0 Version in ENGLISH !
That is the only one, work with the Universal.
All other Lang. are not working !
If it freeze during start, tap sometimes on screen,-it will works !
Click to expand...
Click to collapse
It doesn't works with my qtek 9000
Strange, it works om my Qtek9000! Did you try a soft reset?
It works !
Just re-installed and soft-rest
Thanks rastaman !!!!
Re: Adobe's version of Acrobat
The Mailman said:
Got to go with the Adobe version - sure its bloated and takes the usual age to load each time you start it fresh - but it beats clearview hands down
Click to expand...
Click to collapse
Bloated? It takes a couple of minutes to load for me!
Gimme a PDA version of Foxit, and hurry up 'bout it!
It took 15 secs to load on my Exec. Not great but at least it can actually read PDF documents unlike ClearVue.
Adobe reader for pocketPC v2.0 work well on my o2 mini.
If I can remove some plugin, it could be smaller in installation. Anyone can help which files to remove? Thanks!
Regards,
Arto.
Adobe acrobat 1.0-better than 2.0
Hi guys. Of cource i am looking for something better that could open all sorts of books like all of us.I stumbled upon this post and I see your issues.I must admit thet the embeded clearvue Pdf(if I'm right) suks and I never used it.Also I downloaded the Adobe 2.0 when I got my Jasjar,just to realize theat IT HAS 14 MB!!!.A lot .And loading ...and loading...
Anyways,I owned before mj jasjar an Ipaq and had adobe 1.0 on it.So I installed it on my partner(Jasjar) and it works wonderfully for me.
Opens up in seconds and does all that needs to get a book or a document.
I'll try to put it up here someplace. Let's see if I can figure it out.
I found something here as well: http://www.hpcfactor.com/support/cesd/s/0067.asp
also : http://downloads.zdnet.co.uk/0,39025604,39050362s,00.htm
Good Luck.
Hi Peeps,
I have a 20mb PDF installed on my Tytn. ClearVue can open the pdf, but when I try and scroll down the document I get the progress bar at the bottom like its trying to display the page but instead it closes the application completely.
I have downloaded Adobe Acrobat for Pocket PC version 2, however it fails to install and states its not got a trusted certificate.
Can anyone help?
Cheers
Pdog
I could be wrong, but I highly doubt you'll be able to open a 20MB file. You probably don't have enough RAM available...
I have a similar problem with ClearVue as well. In my case it immediately closes when trying to open any PDF file. Anybody an idea is really appreciated.
Thanks
StonyA
Also i've the same problem. Pease help us !!!! Thanks
Have you downloaded the correct version of Adobe for PPC? I have it installed and no problem opening files.
efjay said:
Have you downloaded the correct version of Adobe for PPC? I have it installed and no problem opening files.
Click to expand...
Click to collapse
Which one did you install? Do you have a link? When I checked recently, there was so sign of WM5 support ... ???
Thanks.
ClearVue PDF
I was using CV as it came installed in my Dopod. It must suffer from some sort of memory leakage or other gross memory management flaw since it takes forever to "redraw" even a small document of less than 70Kb. I tried to ope a 1.4MB document and went ok, aside of the time it took to display each page. In short, it is useless. In spite of no specific support mentioned on Adobe's web site, I went on and installed Adobe for PPC 2.0. It worked flawlessly! For those of you who are interested in downloading the app, here is the link: http://www.adobe.com/products/acrobat/readstep2_mobile.html
Disregard the warnings referring to compatibility and/or certificates. It should run perfectly. As for screen redraw speeds, no comparison! Adobe PPC2.0 beats CV hands down!
Finally, does anybody know how to uninstall ClearVue? Is it possible at all? If not, I may have to use Pocket Tweak to redefine file extensions for Adobe PPC
Cheers
Hi All,
Had my Dopod838pro for 1 month, now had problem
ClearVue PDF - Dopod program.
Whenever I click this program , will show this error
message:
A problem has occurred with gwes.exe.
Please tell Microsoft...
- No third party program installed yet except those from Dopod
- Done soft reset but still same problem.
- Cannot find this software in Remove Program
Can any one pls advise on how should i reinstall or remove this program or recitify this problem.
Thanks for reading.
hihi,
I have same problem with sylvester. Anybody know solution, please kindly help. Thank you.
I managed to get the ClearVue PDF working again
after 2 hard reset. On the first hard reset, ClearVue is better but still seem to be having the some problem, so I tried a second reset after which is OK. Maybe you should try that.
sylvester_k said:
I managed to get the ClearVue PDF working again
after 2 hard reset. On the first hard reset, ClearVue is better but still seem to be having the some problem, so I tried a second reset after which is OK. Maybe you should try that.
Click to expand...
Click to collapse
That's worth a try. Also the Graphics, Windowing and Events Subsystem (GWES) controls the graphics output. Some folks have found that having cleartype enabled causes errors.
Mike
I had used this on my Palm PDA for some time and had no problems. I downloaded the trial and found that when I went to preferences I couldnt scroll down the page to see all the settings/options. I tried the DPAD, moving the scroll bar with my finger and the stylus, it just popped back to it's starting place and the page didnt move.
Dataviz said it's because the software wasnt designed for a touch screen. Excuse me?! For one, I can scroll through the document fine with the dpad and I can pan a page by way of the touch screen. Also, palm devices have always been touch screens and didnt windows mobile start on PDAs with touch screens?
Anyone else tried the software and have it work?
Um, I guess this is not a direct answer to your question, but why on earth would you want to use Documents to Go? The Touch has native Work, Excel, and Powerpoint capabilities, no conversion required. You can even view and edit the new 2007 formats (docx, xlsx, pptx). The Touch also comes with the Adobe PDF viewer built in, so you're not getting anything out of that program.
I had good experience with Documents to Go on my palm pda. I thought I would see how it worked in windows mobile as reviews still gave it high ratings. But after that run around I unistalled it.
It's certainly a very good program - I used it on my old Clie UX40. I'm just saying it's completely redundant and unnecessary on a WinMo 6.0 device.
Does anybody know of a good PDF reader that works on the X1, or Windows mobile in general?
Adobe Reader LE works fine.
I neglected to mention that I would prefer something free. I searched for adobe reader LE, and was directed from the adobe site to one where I could purchase the program for 15.00$. I didnt even see the X1 or Windows mobile listed as supported devices or platforms, but I'll take your word for it. So am I looking at the wrong thing or something, maybe?
If not, then I could still use another solution
huh? It's free from adobe....go here:
http://www.adobe.com/products/acrobat/readstep2_mobile.html
are there any better good performing free finger friendly pdf readers
Xuanlong said:
I neglected to mention that I would prefer something free. I searched for adobe reader LE, and was directed from the adobe site to one where I could purchase the program for 15.00$. I didnt even see the X1 or Windows mobile listed as supported devices or platforms, but I'll take your word for it. So am I looking at the wrong thing or something, maybe?
If not, then I could still use another solution
Click to expand...
Click to collapse
Adobe Reader LE comes with the Xperia. Reformat your phone, you must have uninstalled it.
try this bro http://www.foxitsoftware.com/pdf/mobile/index.htm=
foxit is better than adobe on windows. haven't tried their mobile version though
double post
FoxIt is a great PDF reader, the only one I use. You have to pay, but worth it if you read regularly.
Hi Guys
I have been trying to get the reader to work on my PDA running 6.5 PDA and now running 6.1 with the great help from Tony Chef.
Before posting this i spent various hours looking up the problem on the net and reading here as well as trying factivation but nothing seems to work.
I successfully activate the reader and when I come to read purchased books it won't let me open the purchased books, only the downloaded ones. It either closes the reader programme down or says that my reader is not activated although it says it is at the bottom of the reader start up screen.. Can anyone either come up with a working solution or an alternative reader that can read micrsoft reader lit format files. I prefer to use reader as I find it alot better to use that adobe and other ones I have found but this problem is driving me mad!!! I am installed the latest reader for 6.1 and followed various instructions and hacks like factivation but nothing ever seems to solve it.
Thanks
Anyone !
alfie169 said:
Anyone !
Click to expand...
Click to collapse
you try to use Freda the free ebook reader, to download it go to http://www.turnipsoft.co.uk/freda/
Thanks for the reply, I can use reader for non DRM books but I have loads of books which I have bought which have DRM and the Freda software will not work with them, so back to square one, seems the only way is to get reader working unless I can remove the drm from the books