No ring when JasJar is closed - JASJAR, XDA Exec, MDA Pro General

Hi,
I searched the forum to get the solution but no luck.
Hope someone can help me with the following:
My problem is that if my i-mate JasJar screen is in closed position it will not ring when somebody calls me and they get my voicemail.
When the screen is open and somebody is calling it rings and I can answer.
Can anybody tell me how to set the JasJar, so when the screen is closed it will ring when I get a call and I can pickup with the phone buttons on the side.
Regards
ber00469

You have to check version of your Radio Rom . For me it's look that you have version 1.06 or earlier. It happens often with this version. Try to change - actualy the best is v 1.09 or newest 1.11

imate blows...
Hi,
I've had my jasjar (what a name) for just a little over one month and despite having updated the unit to the latest ROM, I still experience missed calls. This occurs whether the unit itself is open or closed.
I contacted imate and got nothing but grief and extreme agravation while attempting to speak with their "live" online help. Useless.
Wish you luck.
edved.

Well thats unfortunate for the above person, however you will find like 90% of users that a Rom upgrade will correct the problem and it will generally ring on the end of the first ring or end of the second ring.
In any case since the upgrade I havent missed anycalls when ive had the device near me so.
Hopefully it will work for you too.

Osir1s said:
Well thats unfortunate for the above person, however you will find like 90% of users that a Rom upgrade will correct the problem and it will generally ring on the end of the first ring or end of the second ring.
In any case since the upgrade I havent missed anycalls when ive had the device near me so.
Hopefully it will work for you too.
Click to expand...
Click to collapse
I upgrade my rom from xda to latest qtek 9000 and radio 1.11.
The problem is again there
What's happen ? Have some idea ?

ok, some suggestions:
1. extended the ring period from 10 seconds to 30 seconds (via phone settings, or via your phone provider)
2. Make sure your ring tones are in windows\rings not on an sd card
3. Use smaller ring tones, that run less than 30 seconds and start up quickly
4. Disable the video call feature and use the original phone pad if you can do without video calls and the "nice" phone pad
5. Ensure that anyting tying that runs at startup is installed to the device, so when it does start, it doesnt need to start loading dlls and apps when it wakes up.
Rule of thumb, if its needed at startup, or needed on the today screen install to the device.
If none of these work, please provide more details of your device. It is highly unlikely to be the device, and more likely to be what you have done to it. So we would need a summary of answers to the above, plus details of what is installed to what location (device or card).
Simon

simon_darley said:
ok, some suggestions:
1. extended the ring period from 10 seconds to 30 seconds (via phone settings, or via your phone provider)
2. Make sure your ring tones are in windows\rings not on an sd card
3. Use smaller ring tones, that run less than 30 seconds and start up quickly
4. Disable the video call feature and use the original phone pad if you can do without video calls and the "nice" phone pad
5. Ensure that anyting tying that runs at startup is installed to the device, so when it does start, it doesnt need to start loading dlls and apps when it wakes up.
Rule of thumb, if its needed at startup, or needed on the today screen install to the device.
If none of these work, please provide more details of your device. It is highly unlikely to be the device, and more likely to be what you have done to it. So we would need a summary of answers to the above, plus details of what is installed to what location (device or card).
Simon
Click to expand...
Click to collapse
1. was done
2. was done
3. use just the original ringtones
4. was done
5. I've done HR and then there was no problem. So I,ve reinstalled just the Hack performancetweackhighresource and the problem come again.
So, I think the problem is on the use of cache from the hack.
Thank's a lot for suggestion.
Filippo

We found in Poland that sometimes it happens on the edge of network coverage ( ie UMTS). Radio unit is checking signal every few second and change band from GSM to UMTS - it can create problems. So if you are on the edge turn off UMTS plz.

jas_pik said:
We found in Poland that sometimes it happens on the edge of network coverage ( ie UMTS). Radio unit is checking signal every few second and change band from GSM to UMTS - it can create problems. So if you are on the edge turn off UMTS plz.
Click to expand...
Click to collapse
I think about this but I'm in a full covered umts area.
Looking at the hack i've seen it use half cache size and so, I think, it freeze rings from memory.

i also had a problem with that performance tweak and never used it again after my last hard reset.
i find the device with the latest rom runs pretty well with minimal amount of tweaks.
try to undo the performance tweak manually, and see how you go. if necessary HR (painful i know) and rebuild it without.
i would also suggest backup software at the stages through the rebuild so that it can all be repaired and rebuilt.

simon_darley said:
try to undo the performance tweak manually.
Click to expand...
Click to collapse
Sorry to be thick but are we talking about the fatfs cache size?
Am sure mine (m5000) came with this enabled and set to 4096 - is this the default?
or are we talking about the font cache tweak?
thanks
matt

matt1971 said:
simon_darley said:
try to undo the performance tweak manually.
Click to expand...
Click to collapse
Sorry to be thick but are we talking about the fatfs cache size?
Am sure mine (m5000) came with this enabled and set to 4096 - is this the default?
or are we talking about the font cache tweak?
thanks
matt
Click to expand...
Click to collapse
The performancetwekhighresources do that for i.e.:
In HKLM-SYSTEM-STORAGE MANAGER change cache size and daata cache size in 0x00004000 (16384)

Related

XDA2i Problems GPRS, bluetooth, TT3, echo, crashes, etc owow

1. The PDA oftens crashes having previosuly used the phone
2. The TomTom 3 crashes haven driven a short distance
3. The GPRS connection won't connect for a second time without a reset
4. You cant have bluetooth on without flightmode turned off
5. Horizontal Black line across photos in bright light
6. The other caller gets a bad echo when I turn the speaker phone on, even at lowest volume.
7. The last email account added, doesnt download mail
The list goes on. This is truly a terrible device. If it wasnt for the times that things did work fully (rare) and the money I paid for it, it would truly be in the bin!!!
I have read the forums and even after all the hard work people have put in to try and isolate the problems, all of them seem to end up unconclusive regarding the issues I have. I am at my teathers end with this device (
How can the XDA people get away with this, surely they have been approacned about these things? And they say the 2i is better than the 2, blimey I dread to think.....
end rant, thanks for listening
a very disheartened XDA2i user
I recently got an XDAIIi and agree with your post, although 4 is understandable as you shouldn't really be using bluetooth on a plane
I think a lot of the problems are related to third-party software - it might be useful to compare lists of what we have installed, for example I tried out TomTom too and found it ruined the device's stability.
The multiple GPRS connection problem is probably caused by the GPRS monitor program that came on the CD. I had this problem, I uninstalled GPRS Monitor, and GPRS connects correctly every time now.
The camera software is completely flawed, each alternate horizontal line is interchanged before conversion to jpg hence the rubbish quality of the images. Not sure about the horisontal line, but in indoor evening light my XDAIIi was only able to take blurry silhouettes, probably a bug in the automatic brighness control. The camera driver seems to have been sloppily ported from a version for different hardware, and released untested.
The mic pick-up is terrible, and the AGC doesn't seem to make any difference, I get far more people unable to make out what I'm saying than with the plain XDAII. I presume this is another software bug in the AGC.
7 might actually be the bug with all pocketPCs - only the email account currently "open" will auto-download new items periodically.
Also the alarms seem even worse than on normal pocketPCs. As ever I installed WakeupTweak but this time I still missed alarms on a 60s wakup, and had to extend it to 90s.
I have installed Pocket Informant, TT3 (this didnt seem to make anything worse) and have a 1Gb Lexar SD. I did install the GPRS monitor but have since removed it. I think my SD card could be faster, but we keep making excuses for this device.
Re 4, well this was to experiment, as the TT3 crashing has been suggested to be caused by the phone changing cells, but being a Bluethooth GPS I needed flightmode on aswell as BT, which is just about possible but with no definded method other than to confuse it?!? Why the blue blazes they try to force these things I don't know!! I am hoping TT5 will improve this.
re 7. yes i undertand and accept that, but the last one I entered just wont do anything, but not too bothered.
So, as a phone, its rubbish (no speaker phone, crashes, bulky), as a camera it's especially rubbish, as a PDA its ok with wireless in the home, but so long as you dont ask it to do anything out of doors, or even indoors.
These appear on startup, they probably need updating, but not sure where to get the official UK ones
R 1.00.00
G 1337.39
D 1.10.00 WWE
Look forward to hearing about other peoples gripes, next stage with me is probably back to the shop and probably an arguement with some o2 dude.
Perhaps I'm being picky, perhaps I should be happy about giving money away for nothing.
Just scanning through your posts about the IIi. I have had one for about 6 weeks now and haven't experienced any of the problems you describe (not complaining, of course )
I agree that the camera and AGC are not great, but mine behaves itself -- almost typed 'perfectly' there, but that's tempting fate.
I have TT3.07 & Alturion (via a Navman 4410), PocketBreeze 4.3, SPB pocket Plus (+weather add-on)various wifi scanning type programs (I'm a computer tech), a bluetooth neckset, not headset/earpeice and misc. other GPSDash type apps.
Added to this I'm trialling some VITO (navigation/remote/voicedialler) apps and about 300MB of MP3's on a 1GB Sandisk SD card.
My Rom versions are the same as tauria's -- I guess we should all have the same -- there aren't any upgrades/mods yet are there?
The only thing I don't use is GPRS -- don't need it!, otherwise its straight out of the box and saturated in utils and mahjonng/solitaire ( a techies life is sometimes a solitary one :wink: )
I can't offer any advice or help with your problems because I'm not experiencing them, just wanted to add my experience to yours as a sort of balance.
Is it possible you have a couple of rogue devices? or is it possible someone just crayoned an 'i' on mine before sending it out :lol:
Me again, I have rememebered that I performed a hard reset and opted for a corporate install, based on some posts relating to the O2 Active software causing problems -- do you have this installed?
I seem to recall there were several thread on this issue, so I went the corporate route to minimise problems.
Maybe that's an area you could look at?
blackfoot I was wondering if you could answer a question.
I just got my mobile phone number transferred to my XDA's SIM today so have used it as a phone for the first time, if i switch off the device (so it's a black screen but phone still active) and it rings it switches on but it just freezes (this only happens with pocketbreeze on the today plugin) I see the fact that the phone is ringing but the box doesn't pop up.
Is there anyway to make pocketbreeze not refresh its data when a call is incoming ? Or does anyone have the same problem?

MDA Questions after a week of use...

Hello...
I recieved my MDA last saturday, and since then, have been trying to figure everything out. After multiple calls to tmobile, and even a trip back to the store, i'm still stuck with a few questions that i cannot seem to get answered.
1. The MDA came with the default Tmobile theme which works fine in portrait & in landscape, as well as the default blue Windows theme.
However, I have tried to install multiple themes(including some from microsoft themeselves) and i have one annoying error! Whenever I use an "installed" theme, the portrait screen looks fine, but when I open the keyboard...there are two large greyish/white gaps on the side of the theme.
Ex: I'm using a green theme. When in landscape mode, i have a single green square in the middle of the screen with a strip on either side(left or right)
2. My phone is HORRIBLY slow when and if ANYTHING 3rd party is installed. I've tried today plugins that control the memory usage(figured that would help)...however, it just slowed things done. My phone usually runs at about 14mb Free Program Memory, out of the total 44MB(This seems horrible...with just the default programs installed*for the most part* and maybe agile messenger running.). If i install a today plugin, or a game...this drops below 10mb. Therefore, phone usage can be very aggravating. I cannot think of any other way to increase this memory expect for ONE thing. Would it be possible to transfer ALL programs, applications, etc to the miniSD Card(i have 1gb now, with a 2gb in the mail). This way...i certaintly would not be topping out the usage of the card, and hopefully I can free up alot of space on the phone.
3. As we all know, the packaged IM programs are AWFULLY slow and inconsistent. After a bit of research and trials, I have settled on using Agile Messenger. I'm loving it...expect for a few things.
The MAJOR problem I have with it, is the pop up notification. Its annoying to be surfing the web or playing a game, just to have a pop up tell you that you have recieved a message, EVERY TIME you get a new message(which can amount to a great deal in a short time). I've looked all over for a setting, so unless I missed it, is there any way to shut this off?
A side issue with this program, and also the connectivity of the phone is...:
(even WITH the GPRS hack*always on*), I still lose connection(with 2-4 bars of signal) and therefore i get signed off of Agile, rather often. This isnt' such a problem with me, as seeing it takes a short time to log back in. However, when you look at the conversation from another person's point of view...all you see is
"Soandso" Logged off
"Soandso" logged on
etc
etc
(not sure if that last part was a question or a statement, but if theres an answer, i'd like to hear it!)
4.
My girlfriend has a sidekick, and I LOVE the feature of being able to set phone profiles for specific times of the day. Especially during school, it'll go silent, and the second we are out, its back on normal. I have downloaded PZP to try and fix this loss of luxury. However, I personally don't find the program to be very consistent. Sometimes, it seems as if say my "school" profile is fully functioning, while other times, it really doesnt. Call me crazy, but I have taken a shot in the dark and ventured to say that if one touches the volume button on the phone while the phone is on a specific profile...it will throw it out of its cycle. If anyone has some hints/comments/suggestions of their own on this program or other favorites...I would love to hear from you.
5. After I went about and downloaded the Eten dial pad skin, I noticed that all of my contacts were unable to receive contact photos. I quickly realized that any contact that was saved on my SIM card from my previous phone was stuck in this predictament. However, if i were to create a new contact account, it quickly allows me to customize them alot further. Therefore, i was curious if there was any way to transfer my contacts on my sim card>my phone in a fashion that the phone will accept them.
I'm sure i'll think of more questions(these are just the ones that I havent been able to answer after days of searching :-D)
Thank you so much in advance!!!!!!!!!!!!!!!!!!!
Hi,
the speed of the HTC Wizard is very slow. That was my problem too.
for question no. 2:
Moving the apps to the card will result in more free space on the phone, OK, but running the apps from the card will also result in low speed, because the card is slower than the main memory. So I think you won't get more speed by this.
Try to overclock the device with OmapClock. My device works like a charm with 264 MHz (original was 180 MHz).
Use a tool like FreeUp RAM, which is part of the SK-Tools-package.
Running OmapClock and freeing up the RAM from time to time brings significantly much more speed. There is almost no waiting time if you click on an icon. You can even run Skype with OmapClock (many other users do so).
HTH
I have seen tidbits about overclocking through my endless searches the last few days. I've always heard that you have to be careful if you overclock a device, such as a phone. Has anyone had any known issues with the overclocking? Are there risks in having the phone run at that speed all the time?
The Wizard isn't slow. Install a Qtek rom without branding, and it will be much faster.
even the sales associate at tmobile seemed to think it was slow. Upgrading to a different ROM sounds ok, but i'm trying to keep everything via tmobile. thaks for the tip though.
Hi,
Im looking to get the Tmobile USA MDA, but after reading posts like this Im alittle afraid.
I need to run TOMTOM on this device and thinking that this might bring the device to a halt. Now Im starting to think that maybe I should get the 6700. Please let me know what you found out about making MDA faster. Thank you.
TazMan1688 said:
I have seen tidbits about overclocking through my endless searches the last few days. I've always heard that you have to be careful if you overclock a device, such as a phone. Has anyone had any known issues with the overclocking? Are there risks in having the phone run at that speed all the time?
Click to expand...
Click to collapse
There have been long discussion about what is safe with the Wizard on this forum.
See, for example, http://forum.xda-developers.com/viewtopic.php?t=40284
Also, the SmartsKey app automates startup of OMapClock.
http://forum.xda-developers.com/viewtopic.php?t=41060
(It has a number of other uses as well.
Hope this helps.
TazMan1688 said:
My girlfriend has a sidekick, and I LOVE the feature of being able to set phone profiles for specific times of the day. Especially during school, it'll go silent, and the second we are out, its back on normal. I have downloaded PZP to try and fix this loss of luxury. However, I personally don't find the program to be very consistent. Sometimes, it seems as if say my "school" profile is fully functioning, while other times, it really doesnt. Call me crazy, but I have taken a shot in the dark and ventured to say that if one touches the volume button on the phone while the phone is on a specific profile...it will throw it out of its cycle. If anyone has some hints/comments/suggestions of their own on this program or other favorites...I would love to hear from you.
Click to expand...
Click to collapse
There is a known problem with backlighting. See http://zendrui.free.fr/PZPForum/viewtopic.php?t=197
Also, check to see what events PZP is handling for profile-switching. For example, if you have calendar-based or time-based rules, they may switch your profile without you doing anything. Go to Settings, Control to see what you Switches you allow. Or check Time and Calendar for your profiles under the Configuration option.
As much as i'm sure overclocking the device may help, especially in my case. I'm just not sure if its worth the risk. Kind of hard to explain to Tmobile why the phone decided to overheat. Seems overly risky to make such an expensive device, run at higher speeds than its DESIGNED to do. But i'm still not sure, it almost DOES seem worth it...decisions, decisions...
Yes, Thank you for clarifying that...I mostly meant, the inconsistency of PZP with the timing of profiles. It seems as if the program will "switch" to the correct profile, but i don't always see a change in the operation of the device itself. Ex: I have it set to go to school mode at 7:30am, this past week(since its spring break, i've noticed that my incoming calls all had the normal ring volume, as well as system tones, etc...
Although it "says" ""School"" i don't really know if its truely in that mode?!
On this note, i have a question about setting the times(which is what i really want to accomplish). My phone goes to LOUD around 5:30am, School at 7:30 am, Normal at 1:55pm, and Quiet at 4pm.
Nooow, do i have to put two times in the school profile such as 7:30 am-1:54(5)???? so that it has an entire time interval...or can i just tell it when to start, and the next profile will automatically kick in and stop the previous.
Also, does putting the phone in standby or shutting it down have any effect on the profile??
I'm sorry in advance if i'm asking very basic questions, i've just been searching for a long period of time, and i usually can't find a specific answer to my question. So I decided I would spend the time to actually discuss MY problem, with hope someone can help. Again, sorry for any inconvienence or redudant questions.
TazMan1688 said:
As much as i'm sure overclocking the device may help, especially in my case. I'm just not sure if its worth the risk. Kind of hard to explain to Tmobile why the phone decided to overheat.
Click to expand...
Click to collapse
I have a german T-Mobile MDA Vario (= HTC Wizard) and I'm overclocking it permanently with OmapClock and SmartSKey. There is no overheating as far as I can say/feel. I can speed up to 264 MHz (original = 180 MHz). If I try more, the device softresets itself without any damage or loss of data. It's a kind of security mechanism. Of course, battery life is a little bit shorter when overclocking it. But I'm sure, slightly overclocking doesn't damage the device! Maybe the lifetime of the device will be a bit shorter, lets say 6 months in 5 years, but you won't realize that, because you won't be using your device in 5 years. You will sure own some other phone when the CPU dies. Together with the tool "FreeUp RAM" (comes with SKTools), I can reach a comfortable speed for everyday use. But never forget: The Wizard IS quite slow, compared with other devices. You can find smart workarounds for that, but don't close your eyes on that fact.
For running any GPS navigation tools I would consider buying not a Wizard, but a much faster device, if you would ask me. I'm using my Wizard only for addresses (~ 700 items), calendar (~ 1200 items) etc., and without overclocking and using a program like Pocket Informant 2005, that would be an annoying, maybe impossible thing. At the beginning, I had to wait almost 10-15 seconds until e.g. the month overview was created. Switch to the following month - wait again. Choose a specific day - wait again. Oh my god! That needed more patience than I had.
Are you running a basic install without all the phone networks customisation bloat?
you can do this by hard resetting (you will loose data doing this) and then doing a softreset when the customisation dialogue pops up after setting time zone etc.
this will speed things up over an install with tmobiles bloatware. I run tomtom and my device is in general as reponsive as the magician it replaces.
good luck with your phone
R
So guys based on your opinions and experience is it worth for me to get the MDA or should I go with a different carrier and a XV/PPC-6700 ?
Hi yozh,
I don't know the 6700-device at all. Maybe we don't have it here in good old Germany, or maybe under a differnt name. Does it have a bigger display (better for navigation)? Does it have a faster CPU? Then take that one! In my eyes I would never like to use the Wizard for navigation. It's only a better phone, not more, not less. For all other purposes I would buy a bigger machine. I do not want to talk bad about my own device, I have bought it and I use it and it's OK for the everyday things I do with it. It has nothing to do with "I'm proud of my device", like some people seem to be here. It's a phone, man, not a Ferrari or a Rolex. You would tell yourself lies, if you would call the Wizard a powerful device. I had a Palm Tungsten T5 before, and THIS is a powerful device. 2600 items in the calendar (true!), and the reaction time was half a second if you tap on the screen! You can go and have a coffee if you do that on a Wizard.
Just think about it. If you buy a Wizard, try it for a day and then write to me what you think about that phone.
Mh. My english should be better, I know.
Just my 2 Cents!
Hi well the 6700 is the apache I belive and the CPU is 416mhz but its not a "dual core" everything else screen adn such is pretty much the same. Thanks for the reply
SO any one on this forums can recoment apache over MDA ?
yozh said:
Hi,
Im looking to get the Tmobile USA MDA, but after reading posts like this Im alittle afraid.
I need to run TOMTOM on this device and thinking that this might bring the device to a halt. Now Im starting to think that maybe I should get the 6700. Please let me know what you found out about making MDA faster. Thank you.
Click to expand...
Click to collapse
See my posts on http://forum.xda-developers.com/viewtopic.php?t=48448 regarding processor speeds and TomTom.
Wow really TOMTOM runs better on the MDA then on a 400mhz DELL ? Then Im set defenatly getting the MDA, I like GSM network provide3rs better anyway and plus there are so much choices with the phones. I wish I was able to aford the JASJAS that looks really good.
Also don't forget that when you 'close' an appliation it does not really close, it just goes in to background, thus slowing the system down.
Check out your running processes and close all the ones that are not needed or load an app that really closed things.
TazMan1688 said:
1. The MDA came with the default Tmobile theme which works fine in portrait & in landscape, as well as the default blue Windows theme.
However, I have tried to install multiple themes(including some from microsoft themeselves) and i have one annoying error! Whenever I use an "installed" theme, the portrait screen looks fine, but when I open the keyboard...there are two large greyish/white gaps on the side of the theme.
Click to expand...
Click to collapse
Themes built for portrait screens look wrong in landscape view. Easy solution: build a theme that works in landscape view. The Guava Bubbles theme works fine in both because the background image is larger than portrait size.
TazMan1688 said:
4. My girlfriend has a sidekick, and I LOVE the feature of being able to set phone profiles for specific times of the day. Especially during school, it'll go silent, and the second we are out, its back on normal. I have downloaded PZP to try and fix this loss of luxury. However, I personally don't find the program to be very consistent. Sometimes, it seems as if say my "school" profile is fully functioning, while other times, it really doesnt. Call me crazy, but I have taken a shot in the dark and ventured to say that if one touches the volume button on the phone while the phone is on a specific profile...it will throw it out of its cycle. If anyone has some hints/comments/suggestions of their own on this program or other favorites...I would love to hear from you.
Click to expand...
Click to collapse
I use PPC-Profiles-Pro, but you can't slave this to a time. Besides, I'd rather just put it on Silent mode by holding the connection manager button for three seconds (top left side button). Otherwise I use PPC Profiles to switch from Work (BT) to Home (Wifi, no BT) to Sleep (No Wifi, no BT, no email alerts or reminders, just ringer). Walking into a theater, I just go to silent mode.
bilbo_28 said:
Also don't forget that when you 'close' an appliation it does not really close, it just goes in to background, thus slowing the system down.
Click to expand...
Click to collapse
I know. I'm using MagicButton. And OmapClock with SmartSKey. And FreeUp RAM. In deed, I do almost EVERYTHING to make my device run faster.

JASJAR Slow wakeup and dialing

Hay,
I'm using i-mate jasjar, and since day 1 (bought it sep 2005) i've had the problem of slow wakeup and generally slow response. I've run suggested apps such as pocket mechanic etc to remove duplicate wake-up hooks etc, with only slight effect. I've tried several ROMs, none better than the other... I have no extra software installed (i don't want to make it slower than it already is!)
*From i hit a button till the device is (awake) accepting commands takes 10-20 secs...
*From someone starts ringing till my phone is awake enough to start ringing takes 8-10 seconds. clicking the answer button takes another 5+ seconds.
*Dialing is slow (pressing numbers), i suspect it's the DTMF .wav files that take time to load. If i dial too fast, the order of keys pressed are messed up! (say i dial 1-2-3-4, phone takes 4-5 seconds to react, then types 1-2-4-3)
*When i have the usb on, and screen is on, from i click start button, it takes 5-10 seconds before it's displayed. I've tracked this down to a problem reading the icons of certain programs.. any fix for this?
I'm using rom 1.30.76(ext .164), radio 1.09.
This is the latest i-mate rom.
Is my device faulty or is this normal behaviour? Should i try another ROM? Is there any unbranded *good* ROMs out there?
please help,
Michael
VERY abnormal! I had same issue. Solved it here:
http://forum.xda-developers.com/showthread.php?t=281735
Hope it's the same thing for you. If not, work HARD on ID'ign what's on the SD card - and do my test I descroibe with the SD card removed - I bet you see an immediate improvmeent.
Try this
"HKEY_LOCAL_MACHINE\System\StorageManager\FATFS\"
Change "CacheSize" value from "0" naar "4096".
"HKEY_LOCAL_MACHINE\System\StorageManager\FATFS\CacheSize=0x1000(4096)"
Change "EnableCache" value to "1"
"HKEY_LOCAL_MACHINE\System\StorageManager\Filters\fsreplxfilt\"
Change "ReplStoreCacheSize" value to "4096"
disable the 3D phone skin and use the default one it dont has the feature where when typing in a number thats already in the phone book will show . it also looks flat . but its fast .check wiki registry hacks for it . if that dont work install the latest o2 rom with out o2 crap apps then get sktools use sktools and config divise to proformance. trust me it will make your divice fast as wip.
faster than all cooked roms on here
Hi again,
cragiecragie4, I tried removing SD card, no improvement whatsoever on speed.
niketkumar, I tried the cache registry changes, no improvements.
tattootroy, I've run several performance optimizing programs but none make it for the better. What makes this app different?
I still suspect my device may be faulty or bugged, since my friend's device appears faster...
The old I-mate rom was alot faster than the current one, but i don't want to downgrade radio and functionality etc...
Any ROM suggestions?
I'm using the ROM covered here - seems good.
http://forum.xda-developers.com/showthread.php?t=279258&page=1
Done a LOT of installation and work after basic re-flash, but overall I havn't found any bugs at all (despite what others complain about). Sorry, except that the .NET CF2.0 is badly installed.
Did you run my test? Remember that if you remove SD it will still be slow once, then fast thereafter. Did you work thro it properly. I SOOO had your symptoms, and was so pissed with the whole thing I was about to reflash - then I found that this was definitely the issue.
bheam said:
niketkumar, I tried the cache registry changes, no improvements.
Click to expand...
Click to collapse
Did u waited for 10 secs and after dat did the soft reset if not try again .
hi, i had the same pb. i didn't find any solution on french forums and as i suspected my radio upgrade (from 1.09 to 1.13) and my downgrade to 1.13: i decided to hard reset and re install every app on my qtek 9000. Since then it works perfectly. hope it will help...
for info, i got version rom 1.30.97 FRE radio 1.13.00 and extROM 1.30.186 FRE

What makes PDA Hang?

Hi. i want to ask. what makes PDA hang?
I am currently using Atom Life.
And sometimes it hang. and i have to take out the battery and turn it on again. which is very troublesome and makes some of my sms gone as well.
it sometimes occurs when i turn it on. it also hangs there.
can anybody advice me on this?
thanks.
T3D0nG said:
Hi. i want to ask. what makes PDA hang?
I am currently using Atom Life.
And sometimes it hang. and i have to take out the battery and turn it on again. which is very troublesome and makes some of my sms gone as well.
it sometimes occurs when i turn it on. it also hangs there.
can anybody advice me on this?
thanks.
Click to expand...
Click to collapse
lol,
good question
the buggy Os makes it hang.
a Rom upgrade should solve the problem.
shaileshashar said:
lol,
good question
the buggy Os makes it hang.
a Rom upgrade should solve the problem.
Click to expand...
Click to collapse
however, i updated to the latest rom already. how is it? does RAM affect?
T300,
There are lots of things that can make your pda hang, probably too many to go into. I will try and give you the principal areas you need to address, which come from my own experience coupled to tons of reading on here.
1) Activesync - This has a habit of running all the time and is a prime cause of lockups. Use the fake server solution to solve that problem (search on here for it using google search. I will give you the google search link in a minute).
2) Software incompatibilities - You need to make absolutely sure that if you are running WM6, your apps are the latest version capable of running under WM6. I have had a lot of problems trying to run WM5 apps under WM6.
3) Battery and power locks - Make sure that all system locks are disabled. For example you can set your system to turn of the LCD screen or power of after a period of time. Make sure all of these are inactive/not set. If you want to turn your screen off then lighty touch your power switch and it will do the job for you. Touch it again and your pda springs into life; simple. You can use the device lock option on the today screen if you need to lock your screen with the pda on; no problems with this option.
4) Programmes running in the background - I strongly suggest that you set your pda to completely close down any programmes after you have run them, rather than minimise. Use the task manager option to sort this out or install the htc x-button app (search on here for that also).
5) Beams and Wifi - Make sure these are turned off unless you need to use them. Switch them off as soon as you have finished with them. Benefits are improved battery life and less freezes.
6) Inappropriate themes - Not all themes work happily with WM6. Some do lock up your machine. Keep it simple; load a standard WM6 theme that you know works and leave it at that.
There's more, but this should give you something to work on. I will add to this post as I remember other things.
Let us know how you get on. Google search for XA is:
http://www.google.com/advanced_search?q=+site:http://forum.xda-developers.com&hl=en&lr=&as_qdr=all
Cheers
WB

Report issues that you may experience using wp7 (share your problems ) for HD2

I created this thread to list all peoblems on HD2 that may face you to be reported for the developers (share your problems )
list of problems you may suffer from (not all users have all problems in the list ):
1. buttons backlight doesn't work
2. multitouch is buggy and stops working allot (when zoooming )
3. no autofocus in camera , and pictures are so bad
4. big noise in videorecording and very noisy voice
6. loud speaker is very loud
7.wifi mac address will change if you reboot the phone
8. charging problem when the device is off (magldr issue )
9.Support For 1024LEO full Capacity (currently limited to 512)
10. market takes allot of time to verify purchase and download (wp7 issue or just us ? )
11. battery meter not accurate at all, and very high battery usage
12. some htc applicaions doesn't work (audio booster ) works ut make no change
13. flash on camera and green tint
14. light sensor in extreme dark conditions (corrupted as in android ) needs testing not sure
15. rebooring problems
16.FM radio is very loud even with the volume on the minimum setting.
17. sync contacts names problems (may be wp7 )
18. service provider settings (like charge , pay pill ) in windows 6.5 and android doesn't exist (wp7 problem , may be ) .
19. digital compass , is it working or not and how to test it
20.mms, can't change apn for mms
21.No headset icon when headset is bluged
22.push tiles update issue
23.Only the left headset works when make call.
24. mic doesn't work when headset is bluged in
25. Phone remains "locked" after MS activation, no amount of unlocking works. *mod edit - try method 2 : here *
Notes:
A. some issues are windows phone 7 related that we should wait for microsoft to fix them see the list here : http://forum.xda-developers.com/showthread.php?t=836373
B. I will request the next rom update to be an hd7 reg edited as default , so that we will only need to use the activation code without cracking the phones security with (chevron wp7.exe ) as with the next microsoft ypdate we will not be able to use it any more.
C. All problems are being repeated now , i think the list above includes it all ,one more day and i will be reporting all these issues on the chinees forum , or to cotulla ,
A very big problem don't let your phone empty its charge as it can't be charged while it is off and it will die unless you find a way to charge it externally​
I hope that cotulla this repaired
Speciall the camera
wifi problem, phone don't open the site but is connect to the router
WiFi problem - I can't see all WPA secured WiFi networks, I can find (and connect) my WiFi at home, but at work, HD2 doesn't see WiFi there...
Yesterday I answered the phone and the opposite side can't hear me (radio 2.15.., I don't know, just the last version)
Sometimes the phone is little bit laggy, I think, that the problem is in the SD card, when I used the phone w/o card (before hard-reset ofc), everything was faster
1. Speaker is very loud
2. Hope Market will be soon available for all.
I will be updating the list issue periodically and I might register to dft forum to report it all if he is not going to xda anymore
When i try to charge my battery with the phone completely off and the phone begins to charge but in a few minutes the led turns off and the phone does not turn on except for remove the battery.
battery charges only when phone is turned on. Does anyone has this issue?
Moonblood said:
When i try to charge my battery with the phone completely off and the phone begins to charge but in a few minutes the led turns off and the phone does not turn on except for remove the battery.
battery charges only when phone is turned on. Does anyone has this issue?
Click to expand...
Click to collapse
It's a MagLDR issue
Moonblood said:
When i try to charge my battery with the phone completely off and the phone begins to charge but in a few minutes the led turns off and the phone does not turn on except for remove the battery.
battery charges only when phone is turned on. Does anyone has this issue?
Click to expand...
Click to collapse
Known issue with Magldr.
Warning!
Installed win phone 7 on my HD2, and it formated my 16 gb memory card in a secured partition, all data was erased, and i could not format it using any windows tools, so the only solution for me was to "Hard" Format it using a free software called SDFormatter, it formated and brought back to life my microSD Card.
So people, back up your data before flashing.
So far one issue: it takes quite a lot of time to turn off the phone
Regarding the camera, using flash gives green tint. No other problems from the reported ones.
HannoSLM said:
Regarding the camera, using flash gives green tint. No other problems from the reported ones.
Click to expand...
Click to collapse
how is multitouch with you allot of reports say it is corrupted
Battery
Moonblood said:
When i try to charge my battery with the phone completely off and the phone begins to charge but in a few minutes the led turns off and the phone does not turn on except for remove the battery.
battery charges only when phone is turned on. Does anyone has this issue?
Click to expand...
Click to collapse
For me is the same, it came with the new magldr for WP7.
JanHavlicek said:
WiFi problem - I can't see all WPA secured WiFi networks, I can find (and connect) my WiFi at home, but at work, HD2 doesn't see WiFi there...
Yesterday I answered the phone and the opposite side can't hear me (radio 2.15.., I don't know, just the last version)
Sometimes the phone is little bit laggy, I think, that the problem is in the SD card, when I used the phone w/o card (before hard-reset ofc), everything was faster
Click to expand...
Click to collapse
I had the same problem. I've noticed that the wlan channel from my wlan router was 13. I switched the channel to 11 and then WP7 find my wlan...
So, WP7 doesn't support wlan channels higher then 11...
wifi mac address will change if you reboot the phone.
The type isn't clear when you scroll down or up in the system menu, it takes a little bit time when the type is clear again.
The next problem for me is that I don't know how to set up wireless synchronization, I think I've done everything according to Microsoft pages, but it doesn't work for me.
And then I have the same problems like you, loud speakers, camera...
Well, after reading most of the posts here I guess I was lucky, WiFi and Mobile data connection worked for me, the phone was fast (faster than Android).
The whole WP7 seems to be 'airy' and not so heavy as Android, I liked the look of emails, large and clear fonts, easy to read and navigate. But on the whole, the system seems to be too closed off, not much customization is available.
I did manage to unlock it and install some 3rd party apps but soon the phone would give me a message that 'Microsoft has revoked' the particular program. Also the phone keeps locking itself over and over. I got tired of unlocking it every time I wanted to install a new app. Sometimes it worked, sometimes it did not. Had to either reset the phone or PC many times in order for things to work.
Does anybody know a solution to this?
I could have asked MS to give me the 'key' so that live services could be used but was not sure I want to keep this OS on my phone. It may be similar to Vista issue, a nice looking OS but buggy. Somehow I have a feeling that a new and (much) improved WP7 is around the corner.
Couple of tips:
If you want to sync your contacts, calendar, etc., the easiest way is to go through Google. If you used an Android ROM before this should not be a problem. Back up all your contacts in Android by using your Google account, once you are in WP7 go to Settings - People - Gmail and sign in. It will automatically sync your contacts to the phone - painlessly. You can also choose not to have your Facebook contacts mixed with the phone's ones. Up to you.
If you want to revert back to WinMO 6.5 or Android:
- take out your SD card first
- turn off your phone and then hold the Vol Down key as you press and hold the Power button (get into Bootloader screen)
- flash the official ROM (3.14 RUU is recommended)
- use your photo camera to format your SD card (if you have a card holder, stick in, and then format)
- if you wish you can format your SD card again once you put it back into your phone and plug it into your PC
It worked for me. I am using my SD card again to run Android (flawlessly)
tlerner said:
Well, after reading most of the posts here I guess I was lucky, WiFi and Mobile data connection worked for me, the phone was fast (faster than Android).
The whole WP7 seems to be 'airy' and not so heavy as Android, I liked the look of emails, large and clear fonts, easy to read and navigate. But on the whole, the system seems to be too closed off, not much customization is available.
I did manage to unlock it and install some 3rd party apps but soon the phone would give me a message that 'Microsoft has revoked' the particular program. Also the phone keeps locking itself over and over. I got tired of unlocking it every time I wanted to install a new app. Sometimes it worked, sometimes it did not. Had to either reset the phone or PC many times in order for things to work.
Does anybody know a solution to this?
Click to expand...
Click to collapse
After unlock the phone, you have to use 2 softs :HTC Connection Setup and Tom WP7 Jailbreak in order to prevent from MS remote lock. Have you used it before?
some issue
My Leo restarts after about an one-two hours .
When I click the red phone, then again, Leo wake up after one minute , restart or doesn't wake up .
The second issue is when Leo is restarting , all information disappear - just like in hard reset .
It's not very stable and vast ;(

Categories

Resources