Scrolling line-by-line instead of page-by-page - 8125, K-JAM, P4300, MDA Vario General

Is there any way of getting apps like IE and mail to scroll line-by-line instead of page-by-page when using the d-pad? I find it very difficult to read long pages because of the way the text jumps when scrolling!

Only for IE (which normally jumps links when using up/down):
Code:
HKLM\Software\Microsoft\Internet Explorer\Navigation\4-Way Nav = 0 (DWORD decimal)
Edit: Gah - actually, that's wrong. That makes it change from link-to-link to PgUp/PgDn. No 'small scroll' at all. Sorry about that :|

maybe you can use smartskey to activate volume controller button act like page down

Related

Is there a reg hack so to scroll in smaller increments?

I have the 4-way button set to scroll in my IE. Is there a hack so that it can scroll in smaller increments rather than a whole screen at a time? It'd be less annoying when reading short paragraphs that get cut off.
Only for IE (which normally jumps links when using up/down):
Code:
HKLM\Software\Microsoft\Internet Explorer\Navigation\4-Way Nav = 0 (DWORD decimal)
Edit: Gah - actually, that's wrong. That makes it change from link-to-link to PgUp/PgDn. No 'small scroll' at all. Sorry about that :|

Rotation

Rotation:
Right-handed:
HKLM\System\GDI\Rotation\LandscapeMode = 1 (DWORD decimal) (already like that)
Left-handed:
HKLM\System\GDI\Rotation\LandscapeMode = 4 (DWORD decimal)
i want that as i guess it spins the display so the start is near the green botton?
i have tried to no avail
ne sugestions?
anyone????
Well I find if I go into
start - settings - system - screen
and select Landscape there, the display switches the way you want, all other applications seem to make it switch the other way.
However I appreciate that's a bit of a long method to achieve the result you want.
how i want it is button side in my left hand screen used by my right
how you say to go is right hand holding left using the stick
dont want that

Call for improved performance tweaks

Hello guys!
I have taken a look at wiki to find a tweaks that would improve performance/responsiveness of our devices (no matter what hardware or OS you are using) - whether via registry or via settings. I found several such a tweaks (by Cyphol) in Hermes forum:
Performance tweaks that will improve responsiveness of your ROM no matter which you choose (Only tested on WM6 but should work on WM5 too):
1. Improve performance/response time:
- Start > Settings > Phone => Keypad = Off
- Start > Settings > Sounds & Notifications; Under Sound Tab => Disable/Untick Events (warings, system events) - this tweak will BRUTALLY increase the responsiveness of Start menu and Quick Menu 2.7 (because system will no more have to search for sound files in the ROM everytime you tap the screen)
2. Your Windows Mobile device is just like your Windows PC. So, soft reset it before going to sleep (or whenever appropriate) once a day to make it runs good at all time (because of the memory leak when you close the program not all the memory is restored - sof reset restores RAM lost due to Memory leak).
3. Make sure you install the today plugin apps such as Resco Today Plugin etc. on the internal/device memory. Some today plugin can be installed on the storage card but it'll slow down your system performance a bit.
4. Do not install too many apps on the internal/device memory. Leave as much free space as you can on it. Check whether it can be install on the storage card or not. Normally, don't let it become as low as 8MB free but 10MB is enough already.
5. Know what you're doing such as tampering your system registry. Make sure it can be done and you're doing it the right way. If not, then leave it as is.
6. Never let your device go to sleep by itself. Do it manually by pressing the power button everytime when you've finished using your device.
7. Make sure you shutdown the 'Activesync' completely after activesyncing your device with your PC. You can use task manager (X-Button), Magic Button etc or you can use memory applet in setting > System > memory; Running Programs
More tweaks/hints form Nothin:
hint for cookers:
- removing unused keyboards, and today plugins(registry cuts) may have influence too.
- reediting system gfx resources(like gfxes in dialpads etc) may make device faster
- /windows/startup and hklm/init removals may have influence to overall performance and memory usage.
- wise welcomehead, default "windows default" theme, and generally optimised TSK's may have influenece too( good tsk needs stwater and tdywater ONLY(for portrait/landscape,only 2 images, not 4!), i can recommend themegenCE for making good, fast themes. also - themes without start image(today background only) may be good thing.
- stop using x-button! use alternatives - pbar, quickmenu...
- preconfigs are useful - every program may be optimised by its settings - include preconfigs in oempacks(rgu),
- big pagepool is usually..useless, keep it as small, as possible(min. 4 mb, some says, that 4.5 mb is optimal for normal usage)...
i recommend to use sktools to optimise registry - 24% smaller registry.
Aim of this thread: I will collect your hints/tweaks and put them in the first post, then I will update the wiki.
Please post what works for you and is not mentioned on this list!
Registry Tweaks (kudos Nothin):
Never hide the WirelessManager Tray Icon at the bottom.
Don't believe me?
Try it and feel the difference.
This is the key:
[HKEY_LOCAL_MACHINE\Services\WirelessMgr]
"Keep"=dword:00000000 ;<--- (dword:00000000 to hide and dword:00000001 to show)
first thing:glyphcache.
known thing, BUT, not obvious:
my setting:
[HKEY_LOCAL_MACHINE\System\GDI\GLYPHCACHE]
"limit"=dword:00020000
it is 131072 dec.
internet says 32768 value as highest.
nope.
every program, that is using fonts will have faster response with very high values(ie,pdf readers, ebook readers..)
next one:
error reporting:
[HKEY_LOCAL_MACHINE\System\ErrorReporting\UploadSet tings]
"DontUpload"=dword:00000001
controversial one:
[HKEY_LOCAL_MACHINE\System\StorageManager\FATFS]
"EnableCache"=dword:00000001
"CacheSize"=dword:80
and
[HKEY_LOCAL_MACHINE\System\StorageManager\Filters\f sreplxfilt]
"ReplStoreCacheSize"=dword:00000080
small cache is freeing program memory - i CANNOT see almost any merits with bigger cache. both values should be equal.
next one, cache for system sounds:
[HKEY_LOCAL_MACHINE\Snd\Event]
"EventCache"=dword:100
small cache is working ok(default is 1536 kb!)
cache for extrom(useless mem eater,imo,as i do not use extrom,it is clean in my roms, completely empty).
[HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\ TRUEFFS_DOC1\FATFS]
"DataCacheSize"=dword:00000010
another ones are windows animations, turn it off, always.
qtek9100/wizard specific(may be useful for other devices too..) battery performance tweaks:
[HKEY_LOCAL_MACHINE\Drivers\SDCARD\ClientDrivers\Cl ass\SDMemory_Class]
"DisablePowerManagement"=dword:00000000
[HKEY_LOCAL_MACHINE\Comm\AsyncMac1]
"Group"="NDIS"
"DisplayName"="AsyncMac NDISWAN Miniport"
[HKEY_LOCAL_MACHINE\Comm\AsyncMac1\Parms]
"DisablePowerManagement"=dword:00000000
"BusType"=dword:00000000
"BusNumber"=dword:00000000
"RebindOnResume"=dword:00000000
[HKEY_LOCAL_MACHINE\Comm\Irsir1\Parms]
"DisablePowerManagement"=dword:00000000
"TransceiverType"=dword:00000000
"IntIR"=dword:00000001
"Port"=dword:00000004
"CheckForHangTimeInSeconds"=dword:00000e10
"BusType"=dword:00000000
"BusNumber"=dword:00000000
[HKEY_LOCAL_MACHINE\Comm\L2TP1]
"Group"="NDIS"
"DisplayName"="L2TP NDISWAN Miniport"
[HKEY_LOCAL_MACHINE\Comm\L2TP1\Parms]
"DisablePowerManagement"=dword:00000000
"BusType"=dword:00000000
"BusNumber"=dword:00000000
[HKEY_LOCAL_MACHINE\Comm\PPTP1]
"Group"="NDIS"
"DisplayName"="PPTP NDISWAN Miniport"
[HKEY_LOCAL_MACHINE\Comm\PPTP1\Parms]
"DisablePowerManagement"=dword:00000000
"BusType"=dword:00000000
"BusNumber"=dword:00000000
Found these in Wiki (WM5 Peformance tweaks):
Disable menu animations
To disable menu animations (sliding in/out) and speed up performance of the UI a bit:
HKLM\SYSTEM\GWE\Menu\AniType = 0 (DWORD decimal)
To change it back to the default:
HKLM\SYSTEM\GWE\Menu\AniType = 6 (DWORD decimal)
Disable window animations
To disable window animations (minimizing/maximizing) and speed up performance of the UI a bit:
HKLM\SYSTEM\GWE\Animate = 0 (DWORD decimal)
And to switch them back on:
HKLM\SYSTEM\GWE\Animate = 1 (DWORD decimal)
Increase font cache
To increase the font cache, speeding up font rendering at the cost of a bit of memory:
HKLM\SYSTEM\GDI\GLYPHCACHE\limit = 16384 (DWORD decimal)
To change it back to the default:
HKLM\SYSTEM\GDI\GLYPHCACHE\limit = 8192 (DWORD decimal)
You can set the value to pretty much anything you like, but suggested values are 4096, 8192, 16384 & 32768.
Enable FileSystem cache
To enable the FileSystem cache, speeding up overall performance at the risk of the cache not being written on a sudden reset:
HKLM\System\StorageManager\FATFS\EnableCache = 1 (DWORD decimal)
To disable again:
HKLM\System\StorageManager\FATFS\EnableCache = 0 (DWORD decimal)
Note that by default, the cache size is zero, and you will see no effect. See "Increase FileSystem cache" below to increase the cache size.
Increase FileSystem cache
To increase the file system cache:
HKLM\System\StorageManager\FATFS\CacheSize = 4096 (DWORD decimal)
To return the file system cache to zero:
HKLM\System\StorageManager\FATFS\CacheSize = 0 (DWORD decimal)
You can set the value to pretty much anything you like.
Increase FileSystem filter cache
To enable the file system filter cache, speeding up overall performance with file mangement:
HKLM\System\StorageManager\Filters\fsreplxfilt\ReplStoreCacheSize = 4096 (DWORD decimal)
To return the file system filter cache to zero:
HKLM\System\StorageManager\Filters\fsreplxfilt\ReplStoreCacheSize = 0 (DWORD decimal)
You can set the value to pretty much anything you like.
Most of these WM5 reg tweaks work on WM6 too. They are included in tweaking programs like Schap's Advanced Config, HTweakC, or HTCustom 1.8.
+WILL CLEAN UP DUPLICIT ENTRIES LATER+
nice tips....thanks
SIP
The SIP menu trick for Voice Command is worth mentioning here. Credit to whoever found it. It involved exporting the CLSID from the registry, deleting it and then re-importing it again. Speeds up opening the menu dramatically.
littld said:
The SIP menu trick for Voice Command is worth mentioning here. Credit to whoever found it. It involved exporting the CLSID from the registry, deleting it and then re-importing it again. Speeds up opening the menu dramatically.
Click to expand...
Click to collapse
Thanks - any clues in which forum to look for it?
wizard user point of view, remember..(omap etc..;/).
event sounds off thing is a must,imo.
------------------
here was bunch of entries, that are typed earlier now.
------------------
hint for cookers:
- removing unused keyboards, and today plugins(registry cuts) may have influence too.
- reediting system gfx resources(like gfxes in dialpads etc) may make device faster
- /windows/startup and hklm/init removals may have influence to overall performance and memory usage.
- wise welcomehead, default "windows default" theme, and generally optimised TSK's may have influenece too( good tsk needs stwater and tdywater ONLY(for portrait/landscape,only 2 images, not 4!), i can recommend themegenCE for making good, fast themes. also - themes without start image(today background only) may be good thing.
- stop using x-button! use alternatives - pbar, quickmenu...
- preconfigs are useful - every program may be optimised by its settings - include preconfigs in oempacks(rgu),
- big pagepool is usually..useless, keep it as small, as possible(min. 4 mb, some says, that 4.5 mb is optimal for normal usage)...
i recommend to use sktools to optimise registry - 24% smaller registry.
more later.. need to get rid of hangover...now.
---------------
sorry for poor english...
Apologies to nothin. Really great tips. Thank you for your input.
Active Sync issues
"8. Make sure you shutdown the 'Activesync' completely after activesyncing your device with your PC. You can use task manager (X-Button), Magic Button etc or you can use memory applet in setting > System > memory; Running Programs"
I'm having some issues with this...every few minutes, ActiveSyc is present in my running programs. I thought this is perhaps due to direct push of emails.
I have disabled directpush so that I only receive email when I manually select send/receive and have only selected a 30 min window (8am-8:30am) for it to automatically check.
Can anyone provide some feedback so that ActiveSync doesn't automatically turn on?
Thanks!
Wow thanks for the tip about the system sounds. Disabled Event Sounds > At least 50% faster response time for my QuickMenu. Sweet.
KarhU said:
Thanks - any clues in which forum to look for it?
Click to expand...
Click to collapse
It is listed here:
http://forum.xda-developers.com/showthread.php?p=1654136#post1654136
Used to take several seconds to open the sip menu and now it's instant. Something to do with the system looking for CLSIDs that are set as input methods which is really slow.
littld said:
It is listed here:
http://forum.xda-developers.com/showthread.php?p=1654136#post1654136
Used to take several seconds to open the sip menu and now it's instant. Something to do with the system looking for CLSIDs that are set as input methods which is really slow.
Click to expand...
Click to collapse
Thanks a bunch, will try myself and frontpage it. Once again thanks for the tip.
Furthermore, i would like to know how to change the location of receiving file through bluetooth. The default is /My Document. I wanna change it to /Storage Card/My Documents. Pls advise.
Added some more Tweaks from the Wiki. Next update will be - links to freeware tweaking apps and formating/cleanup of existing entries.
Hell dude, I've been hacking these for ages and I have to say that your first point on the sounds is something I had no idea about - and it makes a great difference. Thanks a stack!
cool
i followed some of your advise and its really faster compared before
thanks man
bumping it up, how does one remove keyboards?
Thanks
ludester said:
bumping it up, how does one remove keyboards?
Thanks
Click to expand...
Click to collapse
To add/remove items from the SIP list
If you have a few items in your SIP list which you don't use, they can be removed from the list by setting the IsSIPInputMethod for each item you want removed. To remove the SIP from the list, replace the $SIP_CLSID$ in the example below with a CLSID from the Set default SIP tweak.:
HKEY_CLASSES_ROOT\CLSID\$SIP_CLSID$\IsSIPInputMethod\(Default) = 0 (DWORD decimal)
To add it back to the list:
HKEY_CLASSES_ROOT\CLSID\$SIP_CLSID$\IsSIPInputMethod\(Default) = 1 (DWORD decimal)
The following are some of the ClassIDs:
Typical pre-installed:
{42429667-ae04-11d0-a4f8-00aa00a749b9} = Keyboard
{51A2CB38-154E-4C92-A625-A83871C99EC2} = Phone Pad
{42429690-ae04-11d0-a4f8-00aa00a749b9} = Letter Recognizer
{42429691-ae04-11d0-a4f8-00aa00a749b9} = Block Recognizer
{F0034DD0-2AD4-11d1-9CB0-E84BE8000000} = Transcriber
Third Party:
{991A1001-9DCB-11d3-B3C2-000000000000} = AccessPanel
{1E03E205-12D7-4d82-963E-C01889F2EC10} = Claviature
{500AEF94-EBB8-11d4-B1F8-00304F06E973} = Decuma Alphabetic (UNCONFIRMED!)
{95BDB641-772F-11d2-AC6B-204C4F4F5020} = Fitaly
{52429695-AE04-11D0-A4F8-00AA00A749B9} = FleXslide
{4EAD10BD-83AC-44b9-99AE-71958C1B0F0E} = InPad
{C099F78A-924E-4814-A8CF-54E7BD8C2124} = JetKeys
{4128DEE4-EE84-4338-A261-CC704CB32C19} = NanoPad
{42429695-AE04-11D0-A4F8-00AA00A749B9} = NullKB
{025ECAC2-075B-4b82-A972-05E4C17719EA} = PDAMedia Excel
{FA957346-A925-4b68-B9E1-D3D0310F4433} = PDAMEdia KBD
{DE6510EF-6691-401D-B1D3-B9074BFD1555} = PHM Character Map
{81FC2CAD-AD71-4793-9464-36D27630E584} = PHM Clipboard Pane
{9DD23292-0AB3-48F2-A245-0713652A8CEE} = PHM Ext. Keyboard
{FFFD6819-FF21-4e93-B844-A1BBF986B55C} = QuikWriting
{991A1000-9DCB-11d3-B3C2-000000000000} = RapidCalc
{A070BE16-AD56-11d3-BC77-00C06C512035} = Resco Keyboard Pro
{7F0854D9-9ADA-45A9-A3A2-189D9BE8A653} = Smilies Input Panel
{26F56EF0-2CE8-4C46-ADC8-FE0A7DF12DD1} = SPB Fullscreen Keyboard
{5efab5bd-0af5-48f8-abec-6f36e3a0b5af} = TenGo
{8A7968F3-677B-4F64-859C-8A49FCCCB9BF} = TextPlus
{A5304BFA-CC1D-493f-87D3-D9C17147FA32} = TopKey
{4345EA53-B8A5-4E24-A14A-F7C34DD78077} = WordLogic
KarhU said:
To add/remove items from the SIP list
If you have a few items in your SIP list which you don't use, they can be removed from the list by setting the IsSIPInputMethod for each item you want removed. To remove the SIP from the list, replace the $SIP_CLSID$ in the example below with a CLSID from the Set default SIP tweak.:
HKEY_CLASSES_ROOT\CLSID\$SIP_CLSID$\IsSIPInputMethod\(Default) = 0 (DWORD decimal)
To add it back to the list:
HKEY_CLASSES_ROOT\CLSID\$SIP_CLSID$\IsSIPInputMethod\(Default) = 1 (DWORD decimal)
The following are some of the ClassIDs:
Typical pre-installed:
{42429667-ae04-11d0-a4f8-00aa00a749b9} = Keyboard
{51A2CB38-154E-4C92-A625-A83871C99EC2} = Phone Pad
{42429690-ae04-11d0-a4f8-00aa00a749b9} = Letter Recognizer
{42429691-ae04-11d0-a4f8-00aa00a749b9} = Block Recognizer
{F0034DD0-2AD4-11d1-9CB0-E84BE8000000} = Transcriber
Third Party:
{991A1001-9DCB-11d3-B3C2-000000000000} = AccessPanel
{1E03E205-12D7-4d82-963E-C01889F2EC10} = Claviature
{500AEF94-EBB8-11d4-B1F8-00304F06E973} = Decuma Alphabetic (UNCONFIRMED!)
{95BDB641-772F-11d2-AC6B-204C4F4F5020} = Fitaly
{52429695-AE04-11D0-A4F8-00AA00A749B9} = FleXslide
{4EAD10BD-83AC-44b9-99AE-71958C1B0F0E} = InPad
{C099F78A-924E-4814-A8CF-54E7BD8C2124} = JetKeys
{4128DEE4-EE84-4338-A261-CC704CB32C19} = NanoPad
{42429695-AE04-11D0-A4F8-00AA00A749B9} = NullKB
{025ECAC2-075B-4b82-A972-05E4C17719EA} = PDAMedia Excel
{FA957346-A925-4b68-B9E1-D3D0310F4433} = PDAMEdia KBD
{DE6510EF-6691-401D-B1D3-B9074BFD1555} = PHM Character Map
{81FC2CAD-AD71-4793-9464-36D27630E584} = PHM Clipboard Pane
{9DD23292-0AB3-48F2-A245-0713652A8CEE} = PHM Ext. Keyboard
{FFFD6819-FF21-4e93-B844-A1BBF986B55C} = QuikWriting
{991A1000-9DCB-11d3-B3C2-000000000000} = RapidCalc
{A070BE16-AD56-11d3-BC77-00C06C512035} = Resco Keyboard Pro
{7F0854D9-9ADA-45A9-A3A2-189D9BE8A653} = Smilies Input Panel
{26F56EF0-2CE8-4C46-ADC8-FE0A7DF12DD1} = SPB Fullscreen Keyboard
{5efab5bd-0af5-48f8-abec-6f36e3a0b5af} = TenGo
{8A7968F3-677B-4F64-859C-8A49FCCCB9BF} = TextPlus
{A5304BFA-CC1D-493f-87D3-D9C17147FA32} = TopKey
{4345EA53-B8A5-4E24-A14A-F7C34DD78077} = WordLogic
Click to expand...
Click to collapse
Thank You very much. I am a tweaking enthusiast much like you and my HTC touch is working very well.
Another tweak I found was similar to this one
[HKEY_LOCAL_MACHINE\Drivers\SDCARD\ClientDrivers\Cl ass\SDMemory_Class]
"DisablePowerManagement"=dword:00000000
Instead of SDMEMORY_Class there was MMC_Class there too and it also had the disablepowermanagement option.
I've disabled that option so it does go into power management mode.
for Troditional Chinese Readers:
Native Imputs:
{E18BFD41-BEB8-11D1-8F9F-00AA00B58D45}="注音"
{E18BFD44-DF36-11D1-90DD-0000F81E0CE9}="倉頡"
{124D7CDC-CF2D-418F-8BB4-4395AD048B79}="手寫板"
{5AAFAF99-8D99-4466-A66D-95C44B608A84}="全螢幕手寫"
China FEP_No5en: (simplified Chinese included)
{3671431C-F947-4197-95BB-23723DC47D6E}="Ping Ying"
{15F1353C-E409-4dd4-B3D1-6B58F43792AE}="Chinese Serch"
{9668E639-80A6-4899-B03A-B7151C870657}="Chinese Writing"
littld said:
It is listed here:
http://forum.xda-developers.com/showthread.php?p=1654136#post1654136
Used to take several seconds to open the sip menu and now it's instant. Something to do with the system looking for CLSIDs that are set as input methods which is really slow.
Click to expand...
Click to collapse
Hi, i do not understand? If i remove "HKCR\CLSID" and then add it again it's the same **** like before. Why should there be an increase in speed?

Optical Joystick In Opera

FIXED!!
Hi
I found out which settings are required to fix this. Basically, edit input.ini, find the following under [browser widget] and change it as shown below:
Change:
Left = navigate left
Right = navigate right
Up = navigate up
Down = navigate down
to:
Left = Scroll left, 1
Right = Scroll right, 1
Up = Scroll up, 10
Down = Scroll down, 10
This must be what my old Voda X1 had as its default. For me, it makes the optical joystick useful again in Opera cause you can scroll around the whole page, rather than being restricted to navigating between links.
Don't forget the huge array of Opera options available on the config page (enter opera:config into the address bar). Most of these are explained here:
http://www.opera.com/support/usingopera/operaini/
http://files.myopera.com/ResearchWizard/files/Opera-Mobile.html?1227183542#inputini1
Nigel
Hi
Having sent back my vodafone X1, i now have an HTC X1, and am noting the differences between the two.
On the voda X1, the optical joystick could be used to scroll around a page (without highlighting any links).
On the HTC X1, the optical joystick works more like A 4 way tab button, the page moves, but the links keep getting highlighted.
The highlighting od the linka means that smooth scrolling does not happen.
Anyone know how to make opera behave like it did on the voda X1? i want my smooth scrolling back!
Nigel
My no brand italian X1 works like your "htc" x1.
In IE instead works like "vodafone" x1.
Start > settings > System > Optical Joystick > Allow scrolling iirc
nice hint! thx
Would be nice if it brought up a little mouse... it does this in Opera Mini (probably because Mini is made to have a mouse for all phones using the d-pad).
Hi
All the options under 'optical joystick' in settings are turned on. This does not enable me to pan around the page in opera like I used to be able to with my previous X1 - rather, the optical joystick just moves a highlight between the links on the page.
Previously the links on the page were ignored, and the joystick just moved the page about.
Basically it is now working like a cursor key rather than offering the ability to freely pan about the screen like before.
Must be a registry setting somewhere... either that, or the voda X1 that I had had a newer version of opera installed.
Pain in the arse whatever it is - I had gotten used to using the joystick, now I am back to flicking the screen with the stylus.
Nigel
Hi
Here ia my opera.ini can someone with a voda x1 or an x1 on which the joystick works properly in opera post theirs? you'll find it under application data.
Nigel
Opera Preferences version 2.1
; Do not edit this file while Opera is running
; This file is stored in UTF-8 encoding
[Install]
Preference URL=http://xml.opera.com/spoof/
Browser First Time Launch=0
[User Prefs]
Default URL=file://\Windows\Sony%20Ericsson%20start%20page\index.html
Ignore Unrequested Popups=1
Minimum Font Size=12
Help URL=\Application Data\Opera9\help\en\
Warn Insecure Form=0
Maximum Allowed Tabs=3
User JavaScript=1
Always load User JavaScript=1
UAProf URL=http://www.sonyericsson.com/downloads/X1i-1.0.xml
Home URL=about:blank
URL Type=2
Rendering mode=0
[Adv User Prefs]
Conn Mgr Auto Detect Network=1
[Cache]
Document=7000
Figure=3000
[Disk Cache]
Size=4000
[Security Prefs]
Enable SSL v2=1
Enable SSL v3=1
Enable TLS v1.0=1
Enable TLS v1.1=0
[File Types]
application/vnd.ms-powerpoint=4,\Windows\ppt.exe,,,ppt,|
application/sdp=3,\windows\StreamingPlayer.exe,,,sdp,|
application/x-sdp=3,\windows\StreamingPlayer.exe,,,sdp,|
application/x-rtsp=3,\windows\StreamingPlayer.exe,,,sdp,|
application/mheg=3,\windows\wmplayer.exe,,,mheg,|
application/rstl=3,\windows\wmplayer.exe,,,rstl,|
text/vnd.sun.j2me.app-descriptor=9,,,,jad,|
application/java-archive=9,,,,jar,|
audio/x-wav=0,,,,wav,|
audio/midi=0,,,,midi,|
audio/mid=0,,,,mid,|
audio/wav=0,,,,wav,|
audio/x-ms-wma=4,,,,wma,|
video/3gpp=1,,,,3gp,|
[File Types Extension]
application/vnd.ms-powerpoint=,0
application/mheg=,0
application/rstl=,0
application/sdp=,0
text/vnd.sun.j2me.app-descriptor=\windows\appdb\,2
application/java-archive=\windows\appdb\,2
[Adaptive Zoom]
Maximum Zoom=200
Minimum Zoom=150
Virtual Screen Width=960
[Trusted Protocols]
rtsp=1,0,
[Network]
Check Local HostName=1
Conn Mgr Auto Detect Network=1
UA Post Platform=PPC
[Colors]
Highlighted Background=#23dc23
Highlighted Text=#ffffff
From my UK Vodafone X1
Opera Preferences version 2.1
; Do not edit this file while Opera is running
; This file is stored in UTF-8 encoding
[Install]
Preference URL=http://xml.opera.com/spoof/
Browser First Time Launch=0
[User Prefs]
Default URL=http://live.vodafone.com
Ignore Unrequested Popups=1
Minimum Font Size=12
Help URL=\Application Data\Opera9\help\en\
Warn Insecure Form=0
Rendering Mode=0
Maximum Allowed Tabs=3
User JavaScript=1
Always load User JavaScript=1
Custom User-Agent=Vodafone/1.0/SEX1i/R1AA Opera/9.5 (Microsoft Windows; PPC; Opera Mobi/2141; U; UK) UP.Link/6.3.1.20.0 Profile/MIDP-2.0 Configuration/CLDC-1.1
UAProf URL=http://www.sonyericsson.com/downloads/X1i-1.0.xml
Home URL=http://www.bbc.co.uk/mobile/pda/index.shtml?
URL Type=1
[Adv User Prefs]
Conn Mgr Auto Detect Network=1
[Cache]
Document=7000
Figure=3000
[Disk Cache]
Size=10000
[Security Prefs]
Enable SSL v2=1
Enable SSL v3=1
Enable TLS v1.0=1
Enable TLS v1.1=0
[File Types]
application/vnd.ms-powerpoint=4,\Windows\ppt.exe,,,ppt,|
application/sdp=3,\windows\StreamingPlayer.exe,,,sdp,|
application/x-sdp=3,\windows\StreamingPlayer.exe,,,sdp,|
application/x-rtsp=3,\windows\StreamingPlayer.exe,,,sdp,|
application/mheg=3,\windows\wmplayer.exe,,,mheg,|
application/rstl=3,\windows\wmplayer.exe,,,rstl,|
text/vnd.sun.j2me.app-descriptor=9,,,,jad,|
application/java-archive=9,,,,jar,|
audio/x-wav=0,,,,wav,|
audio/midi=0,,,,midi,|
audio/mid=0,,,,mid,|
audio/wav=0,,,,wav,|
audio/x-ms-wma=4,,,,wma,|
video/3gpp=1,,,,3gp,|
[File Types Extension]
application/vnd.ms-powerpoint=,0
application/mheg=,0
application/rstl=,0
application/sdp=,0
text/vnd.sun.j2me.app-descriptor=\windows\appdb\,2
application/java-archive=\windows\appdb\,2
[Adaptive Zoom]
Maximum Zoom=200
Minimum Zoom=150
Virtual Screen Width=960
[Trusted Protocols]
rtsp=1,0,
[Network]
Check Local HostName=1
Conn Mgr Auto Detect Network=1
UA Post Platform=PPC
[Colors]
Highlighted Background=#23dc23
Highlighted Text=#ffffff
Hi
Thanks for that, unfortunately is it not a setting in that file. I have a suspicion that the setting I want is hiding away in input.ini - would you be able to paste the contents of this file (from a voda X1)?
Cheers
Nigel
I have a HTC X1 (unbranded) and the dpad it works both ways in Opera, though I did not really figure out when it scrolls and when it is in "cursor mode".
One thing is for sure: If there is one link framed (pre-selected), than the dpad works in cursor mode, if you tab on an area without any link then the dpad works in scroll mode - sometimes.
It's really a litte bit weired.
Wanted input.ini from Vodafone X1
Hi
Can someone post the contents of their input.ini file from a (UK) Vodafone X1
Application Data\Opera9\input.ini
Pretty Please?!
Nigel
Sorted!
Worked out how to do this, see updated post on first page
Nigel
Hi bro.
With your settings works, but also normal pad works with scroll. So no metod for select links as it is.
Indeed
I cant remember if on my vodafone, the d-pad still moved the cursor around the links or not. To be honest, I tend to tap the links.
Something is still different from my voda - on that, I could pan to the right hand side of the screen, and then scroll down, while keeping to the right hand side. With what I posted, the screen view moved back towards the left as you panned down.
If I could persuade someone with a (UK) vodafone Xperia to post their input.ini file it would save me guessing!
Nigel
veletron said:
Indeed
I cant remember if on my vodafone, the d-pad still moved the cursor around the links or not. To be honest, I tend to tap the links.
Something is still different from my voda - on that, I could pan to the right hand side of the screen, and then scroll down, while keeping to the right hand side. With what I posted, the screen view moved back towards the left as you panned down.
If I could persuade someone with a (UK) vodafone Xperia to post their input.ini file it would save me guessing!
Nigel
Click to expand...
Click to collapse
Has the same problem, which keeps moving to left whenever moving up or down. So weird...
Thanks a lot for the tip on modifying the .ini file to make the optical pad navigate through the entire webpage rather than through the links. Makes the browsing experience a lot more pleasent. Now if only the would implement the formatting of text depending on how far in we zoom into the webpage like the Touch Pro...
From my branded Vodafone
Code:
[Button Widget]
Enter = Click button
Space = Click button
[Radiobutton Widget]
Space = Click button
[Checkbox Widget]
Space = Check item | Uncheck item
[Edit Widget]
Backspace = Backspace
Left = Previous character
Right = Next character
Left shift = Range previous character
Right shift = Range next character
Left ctrl = Previous word
Right ctrl = Next word
Left ctrl shift = Range previous word
Right ctrl shift= Range next word
Up = Previous line
Down = Next line | Show edit dropdown
Up shift = Range previous line
Down shift = Range next line
PageUp = Page up
PageDown = Page down
PageUp shift = Range page up
PageDown shift = Range page down
Home = Go to line start
End = Go to line end
Home shift = Range go to line start
End shift = Range go to line end
Home ctrl = Go to start
End ctrl = Go to end
Home ctrl shift = Range go to start
End ctrl shift = Range go to end
Del ctrl = Delete word
Backspace ctrl = Backspace word
z ctrl = Undo
y ctrl = Redo
z ctrl shift = Redo
a ctrl = Select all
b ctrl = Toggle style bold
i ctrl = Toggle style italic
u ctrl = Toggle style underline
Del = Delete
[Dropdown Widget]
Down alt = Show dropdown
Esc = Close dropdown
Right = Next item
Left = Previous item
Down = Next item
Up = Previous item
PageUp = Page up
PageDown = Page down
Home = Go to start
End = Go to end
[Browser Widget]
Tab = Focus next widget
Tab shift = Focus previous widget
Left Shift = Scroll left
Right Shift = Scroll right
Up Shift = Scroll up
Down Shift = Scroll down
Right = Navigate right
Left = Navigate left
Down = Navigate down
Up = Navigate up
PageUp = Page up
PageDown = Page down
Space = Page down
Home = Go to start
End = Go to end
Home ctrl = Go to start
End ctrl = Go to end
Esc = Stop
Enter = Activate element | Open link | Focus form | Click button
a ctrl = Select all
[Browser Window]
F1 = GOGI Command Menu or Cancel
F2 = GOGI Window Menu
F3 = GOGI Previous Page
F4 = GOGI Next Page
[Application]
Enter ctrl = Wand
GestureLeft = Back
GestureRight = Forward | Fast forward
GestureUp = Stop
GestureDown = New page
GestureDown, GestureRight = Close page
FlipBack = Back
FlipForward = Forward | Wand
n ctrl = New page
t ctrl = New page
w ctrl = Close page
F5 = Reload
Plus = Zoom in, 10
Plus ctrl = Zoom in, 100
Add ctrl = Zoom in, 100
- = Zoom out, 10
- ctrl = Zoom out, 100
Dec ctrl = Zoom out, 100
* = Zoom to, 100
z = Back
x = Forward
. = Find inline
F3 = Find next
F3 shift = Find previous
x ctrl = Cut
c ctrl = Copy
v ctrl = Paste
tab ctrl = Switch to next window
tab shift ctrl = Switch to previous window
Hi artesea
Cheers for posting that - its the same as in mine so it looks like the scrolling about on my old voda was not achieved by mods to input.ini performed by vodafone.
Guess I'll stick with that I have. Are you able to confirm that on your voda, like on my old one, the optical joystick lets you pan freely about the screen (w/o getting caught on links). I.e 'scrolling' rather than 'navigating' in Opera speak?
If so, when you scroll to the right hand side of a zoomed in page and then scroll down, does the view stay on the right, or does it revert back to the left as you scroll down?
Nigel
It's a UK Vodafone branded X1. When in Opera if I use to optical the page moves around in the direction I scroll. There is no panning to the left when moving down the right hand side of the page.
To move between links I can use the 4 way, although sometimes this doesn't work.
How do you open .ini files in X1?
I can't find any Text Editors. How about Word Mobile?

Rom Differences

Hi
Having owned (for a short time) A Voda X1 and an SE X1, I thought I would post some differences that I have found:
1) My Voda X1 never suffered from the 10sec pregnant pause that appears to occur on my stock SE X1 once/twice a day.
2) My Voda X1 had a disconnect button on the connections bubble, the stock SE X1 does not (easy to fix)
3) On my voda X1, the optical joystick acted only upon the scroll bars in opera - it was not used to hop between links on the page. On the stock SE X1, the optical joystick hops between links on the page, rather than acting only upon the scroll bars (annoying!).
To fix the missing disconnect button, I did the following - pinched from elsewhere on this forum:
Add a 'Disconnect' button (and Timer) to the Connection List for GPRS
To add a Disconnect button:
HKLM\ControlPanel\Phone\Flags2 = 8 (DWORD decimal)
To add a Disconnect button and a timer display showing how long GRPS is in use for the session:
HKLM\ControlPanel\Phone\Flags2 = 16 (DWORD decimal)
To disable both the Disconnect button and the timer:
HKLM\ControlPanel\Phone\Flags2 = 0 (DWORD decimal)
On my SE X1, the flags2 key did not exist, while it did on the Voda X1
Nigel
Thanks for the info about Disconnect button.

Categories

Resources