Related
Any brave soul try using mkrom in conjucntion with the 2003 ROM? I think I might give it a shot here in a bit but wanted to know if anybody had tried it yet...
I've managed to build a 2003 ROM. It's extremely tricky though. I'm working on customizing a ROM similar to the XDA Developers SER - as soon as I get some free time
I'd like to acknowledge all the help given to me by Developer Itsme in this endeavor.
Let me know any suggestions you may have for the new ROM.
sheran_g,
i didn't know u could use mkrom with 2003 rom image. can u please post how u did it? i created a special version based on SE 1.1 rom but would like to put the same programs into the new rom. any help is appreciated.
thanks
alex
sheran_g said:
I've managed to build a 2003 ROM. It's extremely tricky though. I'm working on customizing a ROM similar to the XDA Developers SER - as soon as I get some free time
I'd like to acknowledge all the help given to me by Developer Itsme in this endeavor.
Let me know any suggestions you may have for the new ROM.
Click to expand...
Click to collapse
What's tricky about it...?
The modified registry file you make does not get picked up at the device startup. You need to manually inject the memory address of the modified registry file into the ROM in order for it to get picked up.
my latest romtools can be found at romtools
now it calls dumprom to find and fix the filedata offsets.
I think they should now build 2003 roms.
sheran_g,
can u post the steps that u take to buid it? i'm trying right now and its not working. i'm having little problems. can u post ur default.reg and initobj.txt? any other help is apreciated.
thanks
alex
Ok. Here they are in a nutshell:
Get the latest romtools.
Make the following dirs: romfiles, cfg, tmp, out, files, files1, files2
Split the ROM into Bootloader, bootimage, OS image, xipchain into the 'cfg' dir.
Dump the files in the OS image into a 'romfiles' dir.
Get the default registry file, initobj & initdb files into your 'cfg' dir.
Make changes to your default.reg and initobj.txt
Place any files you want loaded in the ROM into the 'files' dir.
Run 'mkrom.sh'
You should then have your new ROM. I'm sorry if it's extremely brief; you'll have to make do with this and the README file in the romtools archive file for now. You'll find my default.reg and initobj.txt files on my site: www.zensay.com/qtek/mkrom
sheran_g,
Have you created a decent working custom WM2003 ROM?
If so what Apps have you added?
How much ROM space does it use?
I've not added any apps to my ROM. I have only added a carrier logo file and made some changes to the registry. So I cannot comment on ROM space yet. The ROM works fine.
sheran_g,
what command did u use to extract rom files? did u do it under windows or unix?
I'm having problems trying to dump the rom image. I don't know if its too much to ask, but can u zip ur directory and post it somewhere so i can download it? or if u can post commands that u ran to dump the 2003 rom?
thanks
alex
Hi,
could you include "O2 home zune" to the 2003 image, like in the 2002 3.19 GER. Its for Germany interested only!
AR :?:
home zone depends on specific 3.19 rilgsm features. which are not in 4.*
okay, used dumprom -4 -d files -q nk.nbf and extracted all files. Got could not find pointer for ofs 00000000 ERROR but all the files seem to be there. Trying to figure this out. Saw the above abreviated directions but am fumbling around. Anyone have concise directions?
Val
Anyone? Just give me a good hint then please.
Hi all!
When i overwrite the rilgsm.dll file in the t-mobile 4.0.10 image with the rilgsm.dll from the O2 GER 3.19 image, i could use the "O2 home zone" option with the hz.exe in Starup directory? rilgsm.dll from german image hes 'at+creg=2' string in it. probably the RIL_GetCellTowerInfo call is now implemented. When it can work, how could i write the german rilgsm.dll to the image? I haven't linux, could somebody cook the image for me?
here is the germen rilgsm.dll and the hz.exe for the "home zone" funktion! http://www.nokiaprog.de/XDA/home_zone.zip
THX
PS: Sorry, my english! ;-)
AR
the homezone enabled rilgsm.dll depends on other dll's and exe's.
probably ril.dll, stk.exe, cell*.dll and maybe more, I have not tried
replacing all.
you don't need to build a new rom in order to experiment with this, you
can just copy the desired files to \windows, to override the rom versions.
And I don't think it works with the RIL_GetCellTowerInfo call,
but adds some notification events.
to change the CREG setting you need to call RIL_DevSpecific with parameter 25 ( to turn it on ) or 26 ( to turn it off )
even though that does not seem to be how hz.exe does it.
Hi,
I opened the image file in the Hex editor and renamed the file there rilgsm.dll. Then I flashed the image, which was phone probably deactivated, because rilgsm.dll was missing. Then I copied over ActiveSync the German rilgsm.dll into the Windows directory, XDA reset and he not accept the file. I assume because the file was not in the EPROM memory! Therefore I wanted to have rilgsm.dll first times in the image!
AR
XDA developer Itsme said:
my latest romtools can be found at romtools
now it calls dumprom to find and fix the filedata offsets.
I think they should now build 2003 roms.
Click to expand...
Click to collapse
Is there any other way i can access this site or I can download this files, the sites are block here in my country, Please Help
Ronnie
I just hard reset my magician. Since i'm using big storage (my friend did it), only some of the cab files from extended_rom are installed. Now i just found out that my smart dialing, MMS, O2 plus are not included. It was easy to recover those programs since i know the cab files.
However, i cant find the right cab for "Running Programs". Does anyone know which one? Thx.
Sorry for the bad language
Running programs - do you mean in Settings > system > memory > running programs?
If you need a task killer I can send you one or there's many around.
V
That's the one. Thx . So actually it's not a stand-alone program. Yes i found the running programs.
So, the question is changed now. I need the shortcut to that program. Usually magician has the blue box icon with a picture of someone running. Do you know the shortcut?
Thx.
Just tried to restore that icon from my old backup before it crashed. I thought it was just only a link to some program. But it is not! It is an exe file and after i restored it, click the Running Programs, it says "Error opening the shortcut or locating the target filename".
Any clues?
My Running Programs app is in the "default_103133" CAB file from my Mini. I run this file after hard reset.
What does that file do? Just open up the running programs control panel?
If you need it back, just type the following into a text file on your PPC
Code:
22#ctlpnl cplmain.cpl,4,2
and save it as Memory.lnk
Then double click on that file.
Tell me if it works ok.
V
@vijay
i just wanna return my magician to the default system . that's why i'm so curious to get back that program.
@ampda
i'll try that file. thx for the info.
I can post my CAB file but it will also add the O2 xda defaults that can with the Aussie unit
ampda said:
My Running Programs app is in the "default_103133" CAB file from my Mini. I run this file after hard reset.
Click to expand...
Click to collapse
Thats right....just install that cab file "default_103133.cab" and you will have your Running Programs app back....that is, if you saved your Ext ROM files before doing the Big Storage patch, or someone can attach that cab file here.
Now my problem is (sorry this might be Off-topic) , how can I have back the AUTOCONFIG for different Telcos, (especially Asian) ? Its also gone after the Big Storage patch. I dont know which of the cab files I need to have it back
anyone have idea or is there a forum for this in Magician?
thanks...
THANK YOU!!! finally i can access my running programs.
anyway, ive another question . let's say i want that program to be installed automatically after I hard reset. how can you do that? so i do not have to restore them manually from my sd card. thx.
dinoalbert said:
ampda said:
My Running Programs app is in the "default_103133" CAB file from my Mini. I run this file after hard reset.
Click to expand...
Click to collapse
Thats right....just install that cab file "default_103133.cab" and you will have your Running Programs app back....that is, if you saved your Ext ROM files before doing the Big Storage patch, or someone can attach that cab file here.
Now my problem is (sorry this might be Off-topic) , how can I have back the AUTOCONFIG for different Telcos, (especially Asian) ? Its also gone after the Big Storage patch. I dont know which of the cab files I need to have it back
anyone have idea or is there a forum for this in Magician?
thanks...
Click to expand...
Click to collapse
To get the menu and icon run O2Auto.sa.CAB, then install the telco(s) you want to be in the autoconfiq menu.
@nsriza, thanks!!! As simple as this, and I can have my Autoconfig back already?
I thought I need to manually edit the autoconfig.txt to change the paths of the cab files?
Btw, I have already installed the cab files for all the Telcos that I need....but not the O2Auto.sa.CAB yet. Is it okay if I install that O2Auto then install again the Telco cabs?
Thanks...
So has anyone knew how to setup auto installation for cab files (eg. MMS, SmartDialing etc) after hard reset? thx
another OOT question...what does autoconfig.txt and config.txt do? and how to use it?
thx
Im assuming your asking for auto installation for after a hard reset using big storage. if you search for "AutoRUn" on this forum you should find a link on how to create an autorun folder on your storage card. you need the autorun.exe (Found in the search for the link) and a folder called 2577 created in the root directory of your storage card. then all you need to do is add all the CABs that you want to auto install after a HR to a ZIP (not Rar) archive and call that archive extROM.zip. then put that in your 2577 directory and hardreset and it will install all the files in the zip. if you havent already installed the cabs you put in the zip it will actually start installing them as soon as you insert the SD card. have a search around you will find lots of info about this subject.
SpeedN
@Speedn
thx for the suggestion. it's very helpful.
@rockafeller
hi i used big storage to convert my german rom (o2 xda mini) to wwe 1.12. now i lost some features like MMS,Smart dialling, Home zone control, O2plus. (as it was the case with you). It would be great if you could share here how did you get them back to work? i mean, i want the procedure to do so. i have a backup of my german rom.
one more question. i dont see the Phone pad option in my text input list after the bigstorage patch. how can i get it back. any suggestions would be so great..
thanx in advance
kk
@visvaram
if you backup ur extended_ROM, u should able to find related cab files, such as MMS**.cab, SMARTDIALING**.cab. Just tap those files and it will be installed automatically. FYI, backup ur cab files first b4 installing.
Im not sure about O2plus and zone files. Anyone care to help?
Hi everyone:
I just bought my Dopod 828, however it language is Traditional Chinese, and I want to change the ROM to englisg.
So where I can find the english rom for this pda and what is the procedure and precaution I need to take during the upgrading.
Joel
Hi...
go to the ftp from here,and download a WWE ROM of ur liking (1.12WWE is an example),also download MaUpgradeUt_noID.exe and flash ur device....
RAGO :lol:
Thanks,
I logged in to the ftp site, there are many folder and many ROM, however what is the different between them?
Shipped_ROMS
Dumped_ROMs
Modified_ROMs
Extended_Roms
BigStorage_ROMs
Radio
Unlock
Thanks Joel
joelwu said:
Thanks,
I logged in to the ftp site, there are many folder and many ROM, however what is the different between them?
Shipped_ROMS
Dumped_ROMs
Modified_ROMs
Extended_Roms
BigStorage_ROMs
Radio
Unlock
Thanks Joel
Click to expand...
Click to collapse
Shipped=original ROM provided from factories(ex:O2,T-mobile,I-mate...)
Dumped=ROMs dumped for SD memory cards upgrades(forget about them for the moment)
Modified=Modified ROMs using kitchens(forget about them also)
Extended=ms_.nbf=not ROM image,but extended ROM where softwares are preinstalled,and start automatic installation after a hard reset...(also forget about them)
Big storage=enlarge ur storage space by freeing the extended ROM memory..(not now,so also forget about them)
Radio=radio_.nbf=not ROM image but ur phone part upgrade(ur device is a phone and a PDA,these ROMs take care of the phone part)
Unlock=not ROMs but tools to unlock ur device if it's locked from communication networks like t-mobile,etc....
so,as a conclusion,use shipped ROM folder... :wink:
RAGO :lol:
Very detailed explaination!
Thank you very much.
I will try to upgrade my device in this week end, good luck to me
Just curious about how other customer the extended rom etc.....
And I saw many CAB file to install... is this those modification that other have make to improve the device?
RAGOv said:
joelwu said:
Thanks,
I logged in to the ftp site, there are many folder and many ROM, however what is the different between them?
Shipped_ROMS
Dumped_ROMs
Modified_ROMs
Extended_Roms
BigStorage_ROMs
Radio
Unlock
Thanks Joel
Click to expand...
Click to collapse
Shipped=original ROM provided from factories(ex:O2,T-mobile,I-mate...)
Dumped=ROMs dumped for SD memory cards upgrades(forget about them for the moment)
Modified=Modified ROMs using kitchens(forget about them also)
Extended=ms_.nbf=not ROM image,but extended ROM where softwares are preinstalled,and start automatic installation after a hard reset...(also forget about them)
Big storage=enlarge ur storage space by freeing the extended ROM memory..(not now,so also forget about them)
Radio=radio_.nbf=not ROM image but ur phone part upgrade(ur device is a phone and a PDA,these ROMs take care of the phone part)
Unlock=not ROMs but tools to unlock ur device if it's locked from communication networks like t-mobile,etc....
so,as a conclusion,use shipped ROM folder... :wink:
RAGO :lol:
Click to expand...
Click to collapse
joelwu said:
Just curious about how other customer the extended rom etc.....
And I saw many CAB file to install... is this those modification that other have make to improve the device?
Click to expand...
Click to collapse
Hi...
In the Magician,extended ROM customization is not as easy as other devices.
For himalaya devices,u can use ER2003edit to open ms_.nbf files,edit them by replacing the cabs,or u can unlock and unhide ur extended ROM using extrom unlocker,then u wille able to see extended ROM as a removable drive,and u can edit cabs within...(note that cabs are *.cab files,or cabinet files,those files are executable on ur PPC,almost every program or software is a cab file,even if it doesn't look like,cab file must be contained in,exept executable applications on PPC like .exe that runs directly by clicking on)
In BlueAngel,ER2003edit don't open it's ms_.nbf,but still u have an extrom unlocker for BAs....so u can also edit ext ROMs...
Now in Magician,and due to the difference in hardware architecture(Magician have one rom slot of 64mb),this device don't have (yet) an ext ROM unlocker,and ER2003edit do not open it's ms_.nbf files....(and the member (Anansky) who did the big storage and we all believe he can make or help in making extrom unlocker,seem to have vanished... :? ...)still,there's advanced methods to customize ur ext ROM,but take into consideration that they r not easy....
1-by dumping the ROM to storage card,then using ntrw and a hex editor to cut a partition of the decoded ROM(the ext ROM),mounting it as virtual drive using total commader plugin,editing it,and reflashing using SD method....ouff...read more about this method from here...
2-by freeing ur ext ROM memory using big storage,then making a folder called 2577 on ur storage card,put in autorun.exe and a .zip file containing ur cabs,so,once u do a hard reset,the cabs will be installed automatically from ur SD card....read about big storage from here and here...learn about 2577 folder from buzz's site... http://www.buzzdev.net/
note that this method does not make u an extended ROM like ms_.nbf,but will do the job as it will install ur favorite cabs directly after hard reset....
Good luck...
RAGO :lol:
Just to share with everyone after few days trying, I have succesfully upgrade my dopod 828, the main problem is facing the Error 150, the Upgrade utility is not designed for this device
The procedure is more or less the same as pervious post in this forum, but just little bit different
1. Right click on the EXE-file and extract to a named folder (using Winzip or something similiar)
2. You should end up with about 6 - 8 individual files; ms.nb1, radio.nb1, nk.nb1 ruu.conf, ruu.dll, enterbl, getdevicedata and maupgradeut, the maupgradeut is the file that runs the upgrade
3. Download the MaUpgradeUt_noID.exe
4. Once you have this file you will need to add this to the folder created above as this is the file needed to initiate the upgrade.
----- until step is exactly the same
Skip this step-> In ActiveSync, click on file and connection settings and untick the USB connection.
5. In ActiveSync, go to option -> Schedule, Set it to Manual, this is to make the PPC USB connection to ActiveSync active but don't do any Sync with your PC and PPC during the upgrade process.
6. Connect the phone to the USB, manually sync once. From now onwards, the step is the same.
-----
7. Now run the MaUpgradeUt_noID.exe
8. The upgrade Wizard will start, go through a few checks then eventually come up with the country Id error.
9. Run the MaUpgradeUt_noID.exe file again and this time it should allow you to run the Wizard.
10. The process should then go through 3 stages which should last about 10 - 15 minutes.
11. When finished you should get the upgrade successful notification and a prompt to reset the device
12. In ActiveSync, click on file and connection settings and tick the USB connection.
13. Enjoy your new ROM
I am trying to upgrade my Dopod 828, and I get a error no. 150 said the ROM is not designed for this device... oh.....
RAGOv said:
joelwu said:
Just curious about how other customer the extended rom etc.....
And I saw many CAB file to install... is this those modification that other have make to improve the device?
Click to expand...
Click to collapse
Hi...
In the Magician,extended ROM customization is not as easy as other devices.
For himalaya devices,u can use ER2003edit to open ms_.nbf files,edit them by replacing the cabs,or u can unlock and unhide ur extended ROM using extrom unlocker,then u wille able to see extended ROM as a removable drive,and u can edit cabs within...(note that cabs are *.cab files,or cabinet files,those files are executable on ur PPC,almost every program or software is a cab file,even if it doesn't look like,cab file must be contained in,exept executable applications on PPC like .exe that runs directly by clicking on)
In BlueAngel,ER2003edit don't open it's ms_.nbf,but still u have an extrom unlocker for BAs....so u can also edit ext ROMs...
Now in Magician,and due to the difference in hardware architecture(Magician have one rom slot of 64mb),this device don't have (yet) an ext ROM unlocker,and ER2003edit do not open it's ms_.nbf files....(and the member (Anansky) who did the big storage and we all believe he can make or help in making extrom unlocker,seem to have vanished... :? ...)still,there's advanced methods to customize ur ext ROM,but take into consideration that they r not easy....
1-by dumping the ROM to storage card,then using ntrw and a hex editor to cut a partition of the decoded ROM(the ext ROM),mounting it as virtual drive using total commader plugin,editing it,and reflashing using SD method....ouff...read more about this method from here...
2-by freeing ur ext ROM memory using big storage,then making a folder called 2577 on ur storage card,put in autorun.exe and a .zip file containing ur cabs,so,once u do a hard reset,the cabs will be installed automatically from ur SD card....read about big storage from here and here...learn about 2577 folder from buzz's site... http://www.buzzdev.net/
note that this method does not make u an extended ROM like ms_.nbf,but will do the job as it will install ur favorite cabs directly after hard reset....
Good luck...
RAGO :lol:
Click to expand...
Click to collapse
Hello,
I have read that some people have been having a bit of trouble with customising their extended rom on the Universal. So here is my attempt at creating a guide, as a way of saying THANKS to all who helped me in these forums to create my own customised ROM's on the blue angel and my current EXEC.
First thanks mainly to Buzz for the Ext Rom Unlocker and also to BeyondTheTech for the Disable Security Cab.
Also thanks to all other members who contributed their trials and files in the thread.
IMPORTANT - DO A BACKUP BEFORE DOING THIS AS A HARD RESET IS REQUIRED!!!!
Here Goes:
This is how i did it:
1. I created a folder on the desktop called Exec, and inside i created 2 folders called Orig Rom and Cooked Rom
2. I then downloaded the following 3 files and placed them into the Exec folder.
3. i copied the unlock policies and the ext rom unlocker onto sd card and copied them to the phone.
4. i ran the unlock policies cab first then the ext rom unlocker cab
5. under programs i clicked on ext rom unlocker to execute the file
6. it then said succesful and reboot to finsh
7. once rebooted install total commander from below.
8. i then ran total commander and typed in /extended_rom (note underscore) and it displayed the contents of the exteneded rom that originally came with the phone.
9. selected it all and copied the contents to SD card.
10. if you connect your phone directly to pc then you can copy the contents directly to the 'orig rom' folder you created earlier, or use card reader to do same.
11. either way you have the contents of the ext rom on the pc. i then deleted the contents of the Extended_Rom on the phone.
12. the next steps are done on the pc.
13. copy the autorun.exe and the config.txt file from the 'orig rom' folder to the 'cooked rom' folder.
14. copy all the CAB files that you want to be installed upon hard reset into the cooked rom folder aswell.
15. copy the disable security.cab file into the 'cooked rom' folder aswell
16. you will need to rename the cab files that you want installing in the following format:
Default_Unsigned_xxxxxx.cab where xxxxxx is the name of the file
17. if the cab files have long names then just rename them!
18. if you wanted to keep some of the original cabs from your extended rom then copy these into the 'cooked' folder aswell but leave their naming system alone ie:
Signed_UNI_Remove_BatteryIcon.sa.CAB
19. once these have been named as above open the config.txt file
20. it needs to be prepared into the following format :
LOCK:Enabled
CAB: \Extended_ROM\Default_Signed_DisableSecurity.CAB
CAB: \Extended_ROM\Default_Unsigned_tcpmp.arm_ce3.cab
CAB: \Extended_ROM\Signed_SSD_BTUR_Patch_For_BT_Cannot_Initial.sa.CAB
CAB: \Extended_ROM\Default_Unsigned_Porta-Pinball.CAB
RST: RESET
this is an extract from my config.txt file
21. i used the existing file and amended the entries, add/deleted some of the entries.
22. note the space between Cab: \ this is important.
23. also note that the first file that i wanted to install was the disablesecurity.cab file, without this the other 'personal' cabs will not install.
24. so once you have edited and saved your config.txt files making sure all spelling is correct (also an important thing otherwise the files dont install) and no warnings are issued either! you will have in your 'cooked rom' folder:
autorun.exe
config.txt
and several cab files
25. select all the files and then 'right click' on properties.
26. select the 'read-only' option and ok
27. i found that after the first install some of the cab files delete themselves! this prevents that from happening.
28. connect your phone to the pc
29. using active-sync Explore device and navigate to the Extended_Rom folder
30. copy all the contents of your 'cooked rom' folder into the Extended_Rom folder
31. once completed, disconnect the phone and perform a hard reset.
32. after you have aligned screen and done the start-up routine it will start installing your personallised cab files.!!
33. You should now have an Exec, customised with your own extended rom and as a bonus a complete back-up on your pc.
34. if ever you upgrade the phone rom/radio etc, all the software you need and the perosnlaised rom is ready to go.
if i have missed a step plz post back and i will edit my posts and put in there.
I cannot stress how important it is that you make a backup first before doing this as you will lose everything on the phone.
Bye for now!!!
Gr8 Work!!!
hi there this is a perfect guide well done m8
only one question as i have the jasjar and i-mate rom on it
i do not have the config.txt file
how do i tell the device to install my personal/third party cab files
thanx in advance
mail attachments
Thanks for the guide, however when i use total commander, extended rom is shown with the same symbol as storage card and I cannot get the mail programme to save attachments to the real storage card as the universal thinks the extended rom is the storage card.
How can the properties of the extended rom be changed so it does not appear to be a storage card ?
Thanks
Steve
Re: Gr8 Work!!!
krassen said:
hi there this is a perfect guide well done m8
only one question as i have the jasjar and i-mate rom on it
i do not have the config.txt file
how do i tell the device to install my personal/third party cab files
thanx in advance
Click to expand...
Click to collapse
i have the same problem, any solution?
the solution to that can be found here:
http://www.buzzdev.net/index.php?option=com_simpleboard&Itemid=59&func=view&catid=40&id=7869#7869
Re: Gr8 Work!!!
majdi said:
krassen said:
hi there this is a perfect guide well done m8
only one question as i have the jasjar and i-mate rom on it
i do not have the config.txt file
how do i tell the device to install my personal/third party cab files
thanx in advance
Click to expand...
Click to collapse
i have the same problem, any solution?
Click to expand...
Click to collapse
I just renamed the required cab file by adding "Default_" to it. That did it.
Thanks
But I have been through the thread numerous time.
The mail programme thinks the extended rom is the storage card.
The thread has a fix to hide the extended rom so the mail programme now saves attachements onto the real storage card.
It just seems a shame to have gone to all the trouble to unlock and make visisble the extended rom, just to hide it again so the mail programme can save onto the real storage card.
Am I missing something. Simple guidance PLEASE.
Steve
hollytree said:
Thanks
But I have been through the thread numerous time.
The mail programme thinks the extended rom is the storage card.
The thread has a fix to hide the extended rom so the mail programme now saves attachements onto the real storage card.
It just seems a shame to have gone to all the trouble to unlock and make visisble the extended rom, just to hide it again so the mail programme can save onto the real storage card.
Am I missing something. Simple guidance PLEASE.
Steve
Click to expand...
Click to collapse
When the hard reset is done the whole point is for the Extended Rom to be hidden again. This ensures that at any point in the future if a hard-reset is required then the phone is setup agian as you want it.
At the moment the Extended_rom partitrion cannot be used as a storage space , and i believe Buzz is working on that.
So my guide illustrates deleting existing rom, and replacing with personalised rom and then hiding it agian.
Above this thread is a link to Buzz's small tutorial to alllow attachemnts to be saved back to storage card instead of the Extended Rom for those who want to leave it Un-Hid.
Regarding those without a config.txt file then renaming everything to Default_xxxxx.cab does the trick.
thanks
This is a GREAT thread. Hats off to you.
Personally, I think I'm going to add the T-Mobile USA Internet Settings cab to "cooked" stuff (I'm in the US).
Does anyone have a cab that will set up the gmail pop settings (w/ generic un/pass of course)? Lazy, yes, but I'm just trying to make any refresh that I would ever need to do that much simpler
i have another question as we have a lot of good registry tweaks....
is it really that hard to create cab files for those registry settings and just throw those in the extRom
regards
krassen
flippy said:
the solution to that can be found here:
http://www.buzzdev.net/index.php?option=com_simpleboard&Itemid=59&func=view&catid=40&id=7869#7869
Click to expand...
Click to collapse
my problem is that in wm5.0 there is no config.txt file to tell the os what to install from the ext rom, i unlocked the ext rom and moved all contents to pc, i also deleted all the existing files from it, and i have all my cabs ready, but the problem is how to tell the installer to take these cabs instead of the origionals?
does it take it automatically, or should i do something to make it install my personalised ext rom?
majdi said:
flippy said:
the solution to that can be found here:
http://www.buzzdev.net/index.php?option=com_simpleboard&Itemid=59&func=view&catid=40&id=7869#7869
Click to expand...
Click to collapse
my problem is that in wm5.0 there is no config.txt file to tell the os what to install from the ext rom, i unlocked the ext rom and moved all contents to pc, i also deleted all the existing files from it, and i have all my cabs ready, but the problem is how to tell the installer to take these cabs instead of the origionals?
does it take it automatically, or should i do something to make it install my personalised ext rom?
Click to expand...
Click to collapse
If you dont have a config.txt file then you need to rename your cab files in the following format:
Default_xxxxxx.cab where xxxxx is the name of your file. this has been found to work in your phone.
thanks
many thanx to u.
this worked just fine.
cheers
disable security cab
Does anyone know where I can download the DisableSecurity.CAB as the links no longer work.
Thanks
Steve
Re: disable security cab
hollytree said:
Does anyone know where I can download the DisableSecurity.CAB as the links no longer work.
Click to expand...
Click to collapse
Did you try the first post in this thread?
You have to register and be logged in to see the files...
links worked for me
l6cum said:
majdi said:
flippy said:
the solution to that can be found here:
http://www.buzzdev.net/index.php?option=com_simpleboard&Itemid=59&func=view&catid=40&id=7869#7869
Click to expand...
Click to collapse
my problem is that in wm5.0 there is no config.txt file to tell the os what to install from the ext rom, i unlocked the ext rom and moved all contents to pc, i also deleted all the existing files from it, and i have all my cabs ready, but the problem is how to tell the installer to take these cabs instead of the origionals?
does it take it automatically, or should i do something to make it install my personalised ext rom?
Click to expand...
Click to collapse
If you dont have a config.txt file then you need to rename your cab files in the following format:
Default_xxxxxx.cab where xxxxx is the name of your file. this has been found to work in your phone.
thanks
Click to expand...
Click to collapse
It's shuld be Default_xxxxxx.cab or Default_Unsigned_xxxxxx.cab / Default_Signed_xxxxxx.cab, now ?
Hi Guys
Is there anybody who can guide me if it is possible to replace the Ext_Rom of a WM6 with WM5 or not?!!!
Actually I had a problem with my Ext_Rom...(There's a CLEARVUE...a default program for Reading PDF files which I hate it,but I can't prevent it of being installed while costumization of WM5 ) So I wondered If I can change My Ext_Rom with the one whcih has not Clearvue inside?
If yes,then how???
Thanks
Easy.
Go to the WiKi and search for "unlocking extended ROM of Prophet".
The extended ROM is just a collection of cabs. On the Prophet (at least in WM 5 not sure if they changed it in WM 6) you can open it with a simple registry change and then manually delete or add cabs. (note that cabs must be signed to automatically install after hard reset)
I looked over the backup of my Ext_ROM (from official i-mate ROM) but could not determine which cab installs ClearView just by their names.
You could always try them manually one by one or use CECabManager (google) to see whats inside.
levenum said:
Easy.
Go to the WiKi and search for "unlocking extended ROM of Prophet".
The extended ROM is just a collection of cabs. On the Prophet (at least in WM 5 not sure if they changed it in WM 6) you can open it with a simple registry change and then manually delete or add cabs. (note that cabs must be signed to automatically install after hard reset)
I looked over the backup of my Ext_ROM (from official i-mate ROM) but could not determine which cab installs ClearView just by their names.
You could always try them manually one by one or use CECabManager (google) to see whats inside.
Click to expand...
Click to collapse
Hi Levenum
It's really great to have someone to help you,finally.Thanks a lot,man .Actually I know how to un-hide the Ext_Rom,but the problem is that I can't find the cab that is installing this damn Clearvue program
I'm looking for someone who guide me which Cab is responsible for that(Gives me the name of the cab.file)...or....Any hero who guide me is it possible for me to change my current Ext_Rom with the another one that is not included that damn CLEARVUE???!!!
Thank you again for helping
Heloooooooooooooo
Isn't there anybody who direct me (and many others who have got the similar problem) by just saying how we can get rid of CLEARVUE in the Ext_Rom or at least replacing it with ACROBAR READER?
I already know how to un-hide AND Unlock the extended rom...
I need only the name of the cab file (which installs CLEARVUE),...nothing more...
It's NOT installed in the ExtROM, it's installed in the "base"ROM.
Black-Rose said:
It's NOT installed in the ExtROM, it's installed in the "base"ROM.
Click to expand...
Click to collapse
Hi Black Rose
I don't care where this damn software is,and I'm not gonna debate you over it...You just tell me what s the name of the cab.file...And if you are so sure about the location,so tell me also the place of it(Base or Ext-Rom?? )
Thanks anyway
I think clearvue is pre-installed in the base ROM, so there is no cab file to delete.
For me, I just ignore that clearvue or adobe LE is there. I just went ahead and installed Adobe 2.0 and everytime I tap a pdf file, adobe 2.0 opens.
If that doesn't work for you, you can use resco explorer to assign which default prog to open any file... similar to "open with" in XP or Vista.
Putra said:
I think clearvue is pre-installed in the base ROM, so there is no cab file to delete.
For me, I just ignore that clearvue or adobe LE is there. I just went ahead and installed Adobe 2.0 and everytime I tap a pdf file, adobe 2.0 opens.
If that doesn't work for you, you can use resco explorer to assign which default prog to open any file... similar to "open with" in XP or Vista.
Click to expand...
Click to collapse
Hi Putra
Are you sure it's not in the Ext_Rom?Because after a hard reset,whenever I prevent the Ext_Rom of customizing my device (Stop customization),I don't have the CLEARVUE installed on my mobile.
This is why I think it must be somewhere in Ext_Rom.Even some excerpts told me that I have to replace my Ext-Rom with the one which doesn't have CLEARVUE...But he didn't tell me exactly how I can find such a extended Rom and how I can do the replacement...I also needed to know if the replacement may damage the Original Rom of my device or not?
Thanks for helping me, anyway and I would be more appreciated if you help me a little more in that.
Ok, in that case, then it should be in your extrom. However, I also do not know which is the cab file. One way is to prevent the extrom customization, and then manually install each cab from the extrom....
Why don't you just leave clearvue in your device, and simply install adobe 2.0? I don't think clearvue takes that much space...
you can edit the ext_ rom by editing the folder content in WM6
I recomend to use winimage to edit extrom, it will lock the ext rom
Putra said:
Ok, in that case, then it should be in your extrom. However, I also do not know which is the cab file. One way is to prevent the extrom customization, and then manually install each cab from the extrom....
Why don't you just leave clearvue in your device, and simply install adobe 2.0? I don't think clearvue takes that much space...
Click to expand...
Click to collapse
Hi again Putra
Thanks again for trying to help me solving this slight problem.You are right About the space that CLEARVUE takes,but I don't want to see in the list of my programs...I want to get rid of it thoroghly...So pleeeeeeeeeeeaseee help meeeeeeeee..... And show me the way to completely erase it from my device!!!!!!!!!
Chopin said:
you can edit the ext_ rom by editing the folder content in WM6
I recomend to use winimage to edit extrom, it will lock the ext rom
Click to expand...
Click to collapse
HI Chopin
Thanks a lot for helping me to solve this problem,but wou,d you pease elaborate a little bit more...After all,I'm a newbie!!!!!
Just tell me what's this WINIMAGE and also tell me if I would be able to find the cab file of CLEARVUE within my Ext_Rom to erase it or not?!?!
Thanks again
winimage to use with extension.nb, as anewbie let forget how to use this one. if you need to kow, use search you;ll find a lot about how to use this one.
just look in the folder and remove it, or just edit the file Config.txt and remove the cab you don;t wanna install, it is so easy and don't need any clarification.
tell me what ROM do you use
Chopin said:
you can edit the ext_ rom by editing the folder content in WM6
I recomend to use winimage to edit extrom, it will lock the ext rom
Click to expand...
Click to collapse
OFF TOPIC: Hi Chopin, can you explain how I can edit the contents of the extrom on WM6?
edit the files. delete any cab you want and instert anycab you want in the folder, but if you add a cab file then edit the file config.txt and and enter the cab file in it
Chopin said:
edit the files. delete any cab you want and instert anycab you want in the folder, but if you add a cab file then edit the file config.txt and and enter the cab file in it
Click to expand...
Click to collapse
Oops, I meant how do I unlock and unhide the extrom in WM6. What prog do I use?
The last time I tried using WM5 tools on PdaViet 01, it didn't work. I have not tried again. I'm on Gullum v6, btw.
if this is what you want here is the files for unlock, and please ask me more if this was not what u needed
Ok, thanx. I'll try them...
Stop off-topics...let's talk about main topic
Hi dear friends
I noticed that we have been a little been off-topic,so I wanted to recall that we are here to help each other to find a way for "HOW WE CAN DELETE ANY CAB(In my case...CLEARVUE's cab file)INSIDE THE EXT_ROM OR CHANGE IT WITH ANOTHER CAB(Again in my case changing default CLEARVUE with ADOBE ACROBAT)?????
My friends
I even checked the Config.text file within my Ext_Rom,but unfortunately even there was no name and trace of CLEARVUE?!?!!??But I' sure it must be there...since when I stop my device of being costumized after a hard reset,I never see this CLEARVUE in my programs...So that means it must be somewhere in Ext-Rom..Somebody...Some hero....some know-all tell me where?????And under what name?!?!??!??!??!?!?
please, we already answer this question, to help you more, what ROM do you use?