Skype - 8125, K-JAM, P4300, MDA Vario General

Hello ,I have loaded Skype on my MDA Vario,is there a way to let this programme run smooth even though the processor is only 195Mhz and the min Req is according skype 312Mhz.If there is anyone who might have solved this problem.PLEASE let us all know! 8) javascript:emoticon('8)')
Cool

Yes overclock your processor - take it to 240mhz amd skype should work well.
See here to download omaplock - http://forum.xda-developers.com/viewtopic.php?t=40284
Read the whole thread to see how to install it, and it explains how to use with skype

Also make sure you have the v2 wm5 version of skype. I found previous versions unusable

Related

Using Skype to call/qtek S200/

Hi all,
I am trying to use Skype on my S200 and it works ok when using it for text (what could go wrong there anyway )
However if I try to call then I get prob's.
Very slow, then I get sound problems (reception mainly).
Is this a problem anybody else is experiencing as well? Does anyone here have a solution? I remember reading about overclocking but I thought the OMAP processor that qtek s200 had is good enough to handle Skype?!
For info I downloaded the mobile version for 9090 as only 2 were available. The other one was for qtek 9000 (which I have not tried out yet).
"The minimum requirements to run Skype for Pocket PC 2.0 are:
· OS: Windows Mobile 5.0 Pocket PC or Pocket PC 2003
· Display: 320x240, 640x480 (portrait or landscape), 240x240, 480x480
· CPU: 312Mhz + (Optimized sound quality versions for Intel Xscale, 312Mhz and for 400MHz+), b
· Network: WiFi, 3G or EDGE "
Any ideas/suggestions?
P.S. I would like to avoid the overclocking solution if possible.
Thanks!
Hi Makis,
I am afraid you have to go through overclocking to get acceptable performances with Skype. I am currently using the latest version for Mobile (2.0) downloadable from the skype site.
Search the forum for OmapClock and Skype... you'll find all directions to run it.
...until a new version, optimized for Omap/dual core comes out... if ever...
Bye.
slvrbllt said:
Hi Makis,
I am currently using the latest version for Mobile (2.0) downloadable from the skype site.
Bye.
Click to expand...
Click to collapse
Hi
Which one ? The one for slowest processor or the "normal" one ?
Thx for your answer.
slvrbllt,
Thanks for the reply.
I guess no other way around it. Overclocking it is then. One of these days I will give it a try, I remember seeing something about over clocking in here.
PS
Did you download the one for 9090 or 9000?
Thanks again.
See last post in this topic http://forum.xda-developers.com/viewtopic.php?t=40583&highlight=skype+arm
and you should be able to try out the older, but specialized Skype for ARM devices, unlike the Xcale version that everyone here is using which is causing problems on Prophet. Download the GENERIC ARM version and give it a try.
Please post your results after trying it out.
krale thanks!
very helpful indeed.
For those who will read this in the future I think it is better if you follow the link that krale provided were you can find more specific and detailed info on this subject.
Makis101 said:
krale thanks!
very helpful indeed.
For those who will read this in the future I think it is better if you follow the link that krale provided were you can find more specific and detailed info on this subject.
Click to expand...
Click to collapse
Look for A2DP tread on this forum... Sorry, I can't point you directly.
skype version
You can use the older Skype ARM version, however you won't have access to the contacts you may have added on your desktop version, since it is the newer v.2 which supports the server contact list.
However I'm using the new version of Skype without problems, overclocked to 240 of course.
Get the 312Mhz version from here:
http://www.skype.com/download/skype/mobile/download.html
I haven't tried the high speed one, it may work if you feel like experimenting.
All,
Thank you for your replies and suggestions, everything was very helpfull.
I decided to give overclocking a try.
I tried the opmapclock that you can find in the forums (search for overclocking) There is also a step by step guide on how to keep your gadget overclocked the whole time, because once the phone goes to sleep you have to overclock it again.
I tried my S200 running on 228Mhz and 240Mhz (skype worked fine) and so did all the other applications. I found the 228 enough to see a small improvement.. DO NOT expect miracles and please be careful since there can be some issues if youi over do it. I suggest you do some research in here before you decide to overclock.
I used the latest skype version (I think it is the 2.0 version).
Anyway I hope someone else can also find this info usefull in the future.
Once again thanks for all the help..
Makis
You also have the option of using other VOIP solutions. Do a search for SJphone and sipdiscount and you'll find more info. I can use SJphone without overclocking, but I need to overclock to 240 for the new version of skype.
Thanks Matterhorn I will have a look.

Skype on the Wizard

I'd like to get Skype working on the Wizard. I've tried searching but there doesn't seem to be a comprehensive guide.
I also just tried downloading from Skype.com for the pocketpc 312mhz version and it downloads and installs ok, however at the EULA stage the text doesn't all fit on screen so I am unable to accept the EULA and test it.
Can anyone give any hints and tips? Perhaps the I-Mate cab is available as apparently that may be optimised for the Wizard.
I have a Wizard with the new T Mobile UK firmware.
Many thanks for your help.
...did you install low cpu version (cab version or pc-windows executable). I installed it from...
http://www.freecabs.de/
program1 (new), you've got to search a little (great place, though, for other freeware).
...and i didn't had any EULA issues.
many thanks i'll give that a try
I've installed the low-cpu version and even with the wizard overclocked around 240 I find the voice quality not adequate enough.
...with overclocking you're able to use high cpu and therefor better quality. Also there are some threads around to improve mic & phone sounds...
I tried the low cpu beta install linked from the freecabs site, same issue, I get the eula and just see a t at the end and no yes / no / i agree to progress past this.
Anyone else have any ideas?
I'm assuming all of these require the use of skype, what other software is out there that lets you use VoiP on these phones? (We use VoiP at the office, but not Skype)
...i don't know any other VoIP software because at this moment there are 3 million skype users online, and i wanna stay in contact with them, so i didn't looked for any other. Or can other VoIP-servers connect with skype servers?...
i down loaded the low cpu cab and it sound real bad even with my qtek 9100 over clocked at 252 and using wifi

Getting Skype to work - the answer is here.

First, thanks to AsGF2MX and his topic here
This tweak is not new, im just bringing it to the attention of those who only read the prophet forums.
It would appear the high and low CPU version of skype are most likely the same, the only difference being which codec it uses to compress the audio (high uses a smarter and higher quality codec resulting in high voice quality).
While low has a lower voice codec it is possible to make it even lower. The actually call quality is fine, the only difference is IT WORKS!
Heres what to do:
1) Install Skype for Low CPU's from http://www.skype.com
2) Run the attached CAB or modify the registry yourself (HKLM\Software\Skype\Phone\Audio\DisableCodecs and set it to read ILBC G729 EG711U)
Thats it, no need to overclock. You cant call the skype echo123 or Linux users as they dont support this codec but everyone else should work fine on WiFi.
Now even easier. Below is an install which will install skype that will work on the Prophet/JAMin/M600/S200.
What is it?
Its just the bog standard Skype 2.0.0.51 from skype.com but I added the registry keys required to acutally get it working on this device. I also added the Today plugin from the new Skype 2.1 beta.
How?
1. Remove any existing Skype install
2. Click here to Download Skype for Prophet and run the CAB file on your device
3. Launch skype and logon
Also attached is a seperate download to add the today plugin found in the 2.1 Beta for those that dont want to fully re-install.
Wizard?
Any idea if this will work with a Wizard?
Yes, the original thread I took the tip from was for teh wizard. Same processor, same outcome.
Work fine, at least in my device, thanks a lot!
cidriver said:
Work fine, at least in my device, thanks a lot!
Click to expand...
Click to collapse
As for me.
Seems to work fine for me too! Thanks a bunch
This is great. Thanks a ton! I finally am looking forward to installing Skype on my prophet without any hassle
works great here too on the wizard
I installed the CAB file that dannyoneill posted. When trying call skype's test number I get "no common codec" and skype hangs up. Does anyone know what to do about it?
// lidholm
You cannot use skype once you have applied this fix to call users running skype on Linux. Which is what the test server runs.
Linux only supports the one codec and it happens to be the one thats causing trouble for us.
For most they dont actually know anyone who runs Linux so its not a problem, and even if they did they have a choice. Not working at all or working for windows users.
Thanks for the reply.
Am I able to use SkypeOut ?
// lidholm
you can, as far as I know its just skype on linux that has issues, skype out, in , chat, it all works.
What about calling users that have Skype for Mac OS X? do their skype support this codec?
i believe so, yes
codec issues
This version works great with my xv6700, howeverm I replaced skype 2.2 with this. Problem is, when I reinstall skype 2.2 after uninstalling this modified 2.0 version, I cannot call with skype 2.2! It would seem all the codecs are disabled. No skypeout, no windows users, no nothing. I have checked the registry and there is nothing listed under the disabled codecs. Skype 2.2 worked OK (but slowly) before I installed this package. Any suggestions?
Does Skype work on GPRS
Hi,
Unable to download the cab file off the ftp server and also there's no Low CPU version available on www.skype.com mentioned as such. Can you please upload the file as an attachment with your message.
Also, I have an unlimited data plan through GPRS with my service provider. I have read, not clearly though, that Skype would work only through a Wi-Fi connection. My questions are -
1. Is it true, that Skype works only with Wi-Fi Net connectivity
2. If yes, is there any tweak/modification to use it through GPRS connection
3. If no, is there any other VoIP software available for WM5 that connects through GPRS.
Thanks,
Umesh
O2 Neo, WM5
JuxTuSiVo said:
This version works great with my xv6700, howeverm I replaced skype 2.2 with this. Problem is, when I reinstall skype 2.2 after uninstalling this modified 2.0 version, I cannot call with skype 2.2! It would seem all the codecs are disabled. No skypeout, no windows users, no nothing. I have checked the registry and there is nothing listed under the disabled codecs. Skype 2.2 worked OK (but slowly) before I installed this package. Any suggestions?
Click to expand...
Click to collapse
Hi there,
I had the same problem with disabling the codecs. I installed the 2.2 and after setting DisableCodecs, any call would fail with an error message "Audio I/O error" (SkypeOut, too). Then I removed this registry setting, rebooted and the error persisted. It seems that skype stores this setting at a different position and doesn't change it back.
The solution to the problem is to manually navigate to the Skype folder, open config.xml and remove the codecs which should still be inside the <DisableCodecs>...</DisableCodes> tags.
However, I still haven't figured out what the problem with disabling the codecs is in the first place. I'm running WM5 on an O2 Neo. Any ideas greatly appreciated!
Chris
Thanks for your sharing!
I am going to give it a try!

Trinity to slow for Skype?

I installed Skype 2.2 BETA for Windows Mobile the other day and don't seem to be able to get a connection with reasonable voice quality. It's clearly not related to insufficient speed of the data connection cos when I'm running Skype on my laptop (through the internet sharing functionality of the Trinity), I get a good-quality Skype connection.
I'm guessing that the Trinity processor is pushed to its limit during an active Skype session: the device is pretty much not responding to stylus taps / hardware buttons - at least not for quite a while...
Is anyone experiencing similar problems Any help appreciated!
Are you sure you have downloaded the correct file for Skype, cause for me it works very good with no sound issues and very very fast response....Maybe you are running other energy consuming programms that leave you with little memory for Skype.
The file should be the correct one. When no applications are running, I've got a bit more than 20Mb free program memory. I've uninstalled Skype for now so I can't check how much of that is left after launching Skype. The file storage was pretty low (~2.5Mb) though as I don't have a miniSD card yet. But I guess that shouldn't really be a problem...
Hi,
i run skype and it´s cool
few points to take care of:
close all other apps wen running skype, active sync running in the background i the death of performance ;-)
goto settings, memory, close running apps. (i´ve set trinity to shut down the apps with the "X" butten, so i can minimize it with the "close" butten)
next: how many contacts do U have in skype? they recomend to have less than 100 for good performance.
lack of mem is an general performance issue, read the thread "Memory Problems) in this forum,... SKtools made a mirical on my trinity
cheers
andi512 said:
Hi,
i run skype and it´s cool
few points to take care of:
close all other apps wen running skype, active sync running in the background i the death of performance ;-)
goto settings, memory, close running apps. (i´ve set trinity to shut down the apps with the "X" butten, so i can minimize it with the "close" butten)
next: how many contacts do U have in skype? they recomend to have less than 100 for good performance.
lack of mem is an general performance issue, read the thread "Memory Problems) in this forum,... SKtools made a mirical on my trinity
cheers
Click to expand...
Click to collapse
Hi Andi
I'm having real problems getting skype to run on my trinity(Orange SPVM700). I can only get it to run as a 'messenger' program, any time I try to make or receive a voice call it crashes. I'm seeing alot of talk about skype being blocked on the SPV and i'm beginning to wonder whether i'm going to need to make an upgrade to get it to work. Would you mind giving me details of the rom version you are running on your trinity. tia. If anyone else knows better I would be grateful for any advice. thanks
The last version of skype (2.2?) is not full compatible with trinity....
you can chat but you can't call with voice.
You will need the old beta skype version...
Here:
http://rapidshare.com/files/37248486/SkypeForPocketPC_Beta.CAB.html
thanks for this
it works nice
just try fring
Gtalk, Skype, MSN , SIP all in one app
thanks jacare, i was having the same problem with skype crashing when trying to make calls but i'll give this beta a go.
_blackjack_: fring is useless if you only have wi-fi and don't want to pay extra for gprs access.
_blackjack_ said:
just try fring
Gtalk, Skype, MSN , SIP all in one app
Click to expand...
Click to collapse
Oh,man!!!
This is just what I need,because I use Skype and voipcheap all the time and now I got all under the same app.I usually use Skype and SJphone,but since I got this one much better,I like it.
Thanks so much.
Thanks - Skype beta is working great on the Dopod.
One more thing, how do I do the following (if possible):
1. Have Skype calls go through the speaker phone
2. Records Skype calls (on PC, I use Pamela)
Skype 2.1
Here you are another version.Skype 2.1
Are you guys running Skype and wifi?The reason why I ask you this,is because some routers,AP´s and Wifi routers when it comes to p2p they get kind of stuck.Some P2P apps open multiple connections and don´t close them properly,so it also depends on the memory of the router ,it´s not just the P3600.
Sorry guys I´ve trying to upload it 8 times but it keeps popping up this message over and over:Upload of file failed.
Thanks a lot guys...
I had the same problem (could not find the old version)
Works perfect now... as one year ago
jacare said:
The last version of skype (2.2?) is not full compatible with trinity....
you can chat but you can't call with voice.
You will need the old beta skype version...
Here:
http://rapidshare.com/files/37248486/SkypeForPocketPC_Beta.CAB.html
Click to expand...
Click to collapse
jacare,
Thanks for this.
Man, am I relieved !!! One of the main reasons why I decided to get a Pocket PC was to be able to use the Skype and SkypeOut while mobile (HSDPA and Hotspots or even my home WiFi)
I have a new P3600i arriving around 27 Sept and to be proactive went and downloaded the latest Skype mobile, and while doing so saw the notice that it was incompatible with the P3600 , which means it'll be incompatible with the P3600i.
Expansys P3600i forum
Skype support notice
I've downloaded this earlier version and will use it when the new device arrives.

cant keep aim and ie open simultaneously... whats wrong?

as stated in the subject.
im having problems keeping aim and ie open and running simutaneously.
im using the new aim beta and the ie that comes with the wing.
it didn't work with previous version of aim that I used as well... an old version from the aol uk site I think.
tryin to figure out what's wrong with it..
more importantly, any fixes?
my wing is practically stock.
just dled batt status tonite, overclocked @247.
I don't even know what that does.
also tried to run the pagepool thing but didn't work...
help me out please
thanks!
overclocking to 247 makes your processor run at 247MHz instead of 200MHz, meaning your phone will be faster
as for AIM and IE, use JiveTalk, i can have IE and JiveTalk open at the same time no problem, and Kevtris open.

Categories

Resources