Related
I have just upgraded to Rom 4.01.00 and as it is a T-Mobile rom I want to get rid of the programs that are provided by T-Mobile so it looks like a normal Rom. I remember reading somewhere before how to do this but now can not find the message, can anyone help me on how to do it or tell me where the post is that explains it.
Regards Seal.....
hi seal,
can you share with us the 4.01.00 rom?
let me try it and i'll try to remove the programs, i'll let you know the result
thanks
Ok to remove those T-Mobile apps goto Start, Settings, Today, Items and uncheck "T-Mobile" that does it for the Today plug-in.
Now for the System Tray apps. use File Explorer and go to the \Windows\Startup folder and delete Battery Monitor.lnk.
BTW and if you're not under some type of NDA how about sending the old Qman a PM on how one can obtain a copy of these latest ROM.
HTH
Thanks QMAN, it worked.
Here is the address for the download, half way down the page, its in this forum, http://xda-developers.com/forum/viewtopic.php?t=3335&postdays=0&postorder=asc&start=25
does anyone knows how to get hebrew on the wisard please?
How do you mean - hebrew rom or hebrew font?
just so i can browse my ie and read herrew sites.thanks.
Try putting this hebrew font in windows\fonts on your device (after unzipping it), then soft reset. Dont know whether it will work, cant see any registry hack that can change pie font in that way.
thanks, but it didnt work.
meschle said:
Try putting this hebrew font in windows\fonts on your device (after unzipping it), then soft reset. Dont know whether it will work, cant see any registry hack that can change pie font in that way.
Click to expand...
Click to collapse
Hebrew for Mobile 5
hey, try this, I found it of the forum FTP ... it's a little tricky but worked for me.
read the .info file first.
ftp://xda:[email protected]/Uploads/Hebrew_For_Mobile5/
Re: Hebrew for Mobile 5
hi ofer. i pm'd you. please respond.
ofer said:
hey, try this, I found it of the forum FTP ... it's a little tricky but worked for me.
read the .info file first.
ftp://xda:[email protected]/Uploads/Hebrew_For_Mobile5/
Click to expand...
Click to collapse
PLS try this,.
1st,, insall 3cabs in Dark folder,
the install all cabs 040D fo,der.
and make soft reset.
Heb font is work and you can find...... :lol:
beleve me and try! :wink:
Asukal, i did try but hebrew is not reverse.
I guess one file is filling to revert the hebrew from right to left.
One more bug, there is no more access to start menu.
Ofer- cant download the ftp file.
Do you still have it?
thnxs
sorry, i didint consider about Write to left....
Un Acessable to Start Menu,,,
This shell is making to enable to access English Start Menu..
So,, i uploaded wring one, or, your device is not English Device.
pls let me know what OS language you using?
and,, you can deltete it with conect PC and use PC Explore and rename it,
and after soft reset you can del that.
thnxs asukal.
I have a french ROM.
Can you fix the reverse problem?
How can I recover usage of my phone?
I cannot access start menu. Maybe thru activesync?
asukal
hebrew installed ok but now i want to remove it.
did the uninstall, but the bottom line of the first page, contacts and calendar still show in hebrew.
any way to get it back to english.
thanks
sorry guys, i got slept last night, :roll:
1;USE Activesync and using Explore of PC,
then fix it,
2;if you have still interesting, i will re-made the shell for
french OS,
3:This sets change the value in registries to Hebrew,
so Today Menu Key will change to Heb, and even uninstall this,
egistries are still keep Heb,
<HTC Setting Icon, Inbox, and Today Menu Key,
and some other Registries,>,
so i made another sets to retuern to French Registry
and returen to English registries.
Right to Left writing,,, i have no idea coz it is now knowledge,
(we Japanese also used RIght to Left Wirting before 50year, but no boday use this way
thank you very much for your help and your files.
Do you think this file can revert hebrew?
http://www.jewishcontent.org/pda/pocket-pc/arm/ReverseHebrew.exe
The problem is not from right to left. It is a mirroring problem
The correct hebrew looks like on the right end image.
Your hebrew looks like letters are backwards.
Take a look a the START text or at the left bottom of the screen you will see what i mean.
hi, itested this ReverseHebrew.exe and nothing happend on my Universal.
i guess this can effect just for their own allications fromJewishCOntent.org.
i will check Arabian System, how they doing...
******************************************
BTW, now i have a project to make UI Language Swither Program for
WM5<this is not for Commercial peurpuse>
pls visit here to see what i am doing. :shock:
http://forum.xda-developers.com/viewtopic.php?t=52448&start=25
Now i almost made 20 languages UI can be swithced and relaese
on this forum very soon, :wink: :wink: :wink:
But only Hebrew, i coudlnt get registries for that.
Can anybody help me to transrate to Hebrew attached files?
Thanks guys,,
the problem i knew now,,,,
what a unique interface!!!
:shock: :shock: :shock: :shock: :shock: :shock: :shock:
i will check it,,, :? :? :? :?
Asukal i added to my MSN but cannot see you.
cizake (@) hotmail
hi, i have managed to change the splash screen using buzz tools (t-mobile logo in my case) but how do u change or get rid of the other splash screen or what ever it it..in my case windows mobile logo ?? can i replace it or just have nothing.. i have read that it is welcomehead.192 which is in /windows but when i copy it to my PC i cannot see it anywhere. can anyone help with doing this ?? cheers
cudo
OK, i have sorted it out:
/windows/welcomehead.192.png - just make your own *.png file and replace the exisiting one. it must be 640x480 pix.
bye, and thanks for your help !
thanks for your finding. I will have a try
sorry i didnt find the post sooner CUDO, great of you to work this out, Keep up the good work
Hi, guys. I'm new for universal. I use O2 Exec and up Rom to Dopod 900. I like to use O2 splash screen but cannot find the pic of it.
Anyone can share the pic? Or where can I get it.
Thanks in advance.
hi there,
i'm looking forawrd to have the same original o2 splash screen on my dopod 900 too......any1 out there could guide us to do that?
regards
Hi,
how did you replace it? Active Sync can't replace it, he always tells me about an error that there would not be enough space...
Damn, would really like to have my own picture there....
MfG
MPW
@MPW: replace it by overwriting with another file with the same name!
You can even take a jpg with less quality and size and rename it to png file type, still works!
so all you need is a o2 wallpaper like on the start up.easy done i will see wot i can do.
Blank screen of writing a new text message on 818pro.
Is there anyone can help? There will have no problem after hard reset, it seems one of the programs causes this problem. But does anyone know the reason? Is it memory insufficient?
scott4 said:
Blank screen of writing a new text message on 818pro.
Is there anyone can help? There will have no problem after hard reset, it seems one of the programs causes this problem. But does anyone know the reason? Is it memory insufficient?
Click to expand...
Click to collapse
I have absolutely not clue what you want here. Could you rephrase your problem again and explain it a bit more clearly please ?
Spatzm said:
I have absolutely not clue what you want here. Could you rephrase your problem again and explain it a bit more clearly please ?
Click to expand...
Click to collapse
when I press "New" button in order to write a new SMS (text message) of my 818pro. The content of the message is just a blank screen, I can do nothing with it except closing it. This also affects on MMS and Email.
Is there anything corrupted?
scott4 said:
Is there anything corrupted?
Click to expand...
Click to collapse
This reminds me of something yes. Could you please do these things and reply with answers to my questions ?
a) How much space do you have remaining on your device (how much free ram) ?
b) Go to Start -> Settings -> Installed Software or hows it called (the place where you see what software is installed) and tell me if the list is still there. Do you see your installed programms in the list or is it empty ?
http://www.choiceway.com/content/gsi/ppc_rem9.gif
c) Can you uninstall or install new software ? Please test with some small CAB file on your device.
is Arabizer installed on ur deivce?!when im using unofficial pdamobiz roms on my prophet,after installing arabizer,the new message window becomes exactly as u said!after disbaling the arabizer it worked again.i hope this helps.
Spatzm said:
This reminds me of something yes. Could you please do these things and reply with answers to my questions ?
a) How much space do you have remaining on your device (how much free ram) ?
b) Go to Start -> Settings -> Installed Software or hows it called (the place where you see what software is installed) and tell me if the list is still there. Do you see your installed programms in the list or is it empty ?
http://www.choiceway.com/content/gsi/ppc_rem9.gif
c) Can you uninstall or install new software ? Please test with some small CAB file on your device.
Click to expand...
Click to collapse
Hello Spatzm,
Thanks for your reply.
a) 23.85MB RAM left
b) ce-star suite v2.8 r2a
c) yes, i can uninstall and install new software.
--> this problem exists right after I sync the data and then press soft reset button. Is this the point? because whenever I press reset button, the SMS I wrote disappear even my pda has been just done a hardreset.
niloofari said:
is Arabizer installed on ur deivce?!when im using unofficial pdamobiz roms on my prophet,after installing arabizer,the new message window becomes exactly as u said!after disbaling the arabizer it worked again.i hope this helps.
Click to expand...
Click to collapse
I dun think "Arabizer" is installed. Is it a program? or something about "Arab"?
Anyway, I can't find it from "Remove program". Tks.
scott4 said:
I dun think "Arabizer" is installed. Is it a program? or something about "Arab"?
Anyway, I can't find it from "Remove program". Tks.
Click to expand...
Click to collapse
I hardreset my 818pro again, but never press the soft reset button, so far ---- OK!!! Why the reset button cause such problem on serveral version of ROM?
AKU2.3.1, AKU3.2, AKU3.3
Arabizer is a program which enables your device to show arabic fonts.when i install it on official roms,there is no problem but when i install it on pdamobiz roms then i have a blank new sms window.as i said,after disbaling the arabizer it works again.hope it helps.
niloofari said:
Arabizer is a program which enables your device to show arabic fonts.when i install it on official roms,there is no problem but when i install it on pdamobiz roms then i have a blank new sms window.as i said,after disbaling the arabizer it works again.hope it helps.
Click to expand...
Click to collapse
There is no such program installed on my 818pro.
I am using AKU3.3 clean rom.
scott4 said:
There is no such program installed on my 818pro.
I am using AKU3.3 clean rom.
Click to expand...
Click to collapse
Probably a ROM issue then. If you recall my reply above with the few questions. I initially had in mind that you might run into the security stuff (certification messup) issue but this is not the case.
scott4 said:
I hardreset my 818pro again, but never press the soft reset button, so far ---- OK!!! Why the reset button cause such problem on serveral version of ROM?
AKU2.3.1, AKU3.2, AKU3.3
Click to expand...
Click to collapse
You have the answer right there. The registry is only written back periodically. After doing any changes you should not quickly follow up with a soft reset otherwise any new information will be lost. At the very least switch off and on again before doing a soft reset. This is not a ROM fault it is simply that writes to the registry are not carried out immediately.
If you want full details see here:
http://www.pocketpcmag.com/blogs/index.php?blog=3&p=898&more=1&c=1&tb=1&pb=1
Mike
mikechannon said:
You have the answer right there. The registry is only written back periodically. After doing any changes you should not quickly follow up with a soft reset otherwise any new information will be lost. At the very least switch off and on again before doing a soft reset. This is not a ROM fault it is simply that writes to the registry are not carried out immediately.
If you want full details see here:
http://www.pocketpcmag.com/blogs/index.php?blog=3&p=898&more=1&c=1&tb=1&pb=1
Mike
Click to expand...
Click to collapse
Hello Mike,
Thanks alot for your explaination. The data cannot be written immediately, so that should not press soft reset button right after a SMS (text msg) is written. This question is answered well.
However. My main problem is why the SMS writing page became blank and never recover until a hardreset? I had this problem after sync PIM and then pressed soft reset button.
scott4, nice to meet u Do u come from HK?
I have the same problem before...
At that time , I used AKU2.? (forget XD) and ce-star too!!!
After hard reset for about a week.....the problem will appear again= =
SO i always reset -> blank -> reset -> blank -> loop....
until I upgrade my 818pro to 2.3, ...
and I don't use ce-star again....since it always hang= =
firstly i use monster chinese...but i found that the font is very ugly.....
so at last , i don't use monster chinese anymore, I only copy mingliu font from my winXP, and edit the registry to let my 818pro can read chinese....
Also , I download the Chinese input method from monster website, but without using monster XDDD
I don't know it's the problem of AKU? or ce-star? or just i'm very lucky.......
I want to upgrade to AKU3.3 too!!! many people say that it's very fast when you compare 3.3 to 2.3.........i wanna try it~>< But now....I'm afraid the SMS blank problem will appear again= =XD
it's the problem of cestar, i used to have the same problem with cestar installed, after uninstall it the problem was gone
All,
I've exchanged many emails with the imei.check.co.uk team and also met personally one of these guys in order to be able to upload a new ROM to my O2 Orbit. I had excatly the same problem as many of you with ending the uploding process with "model invalid id" error message.
Now I'm happy to say we do have a solution.
So if you want to change your ROM (any), simply follow these instructions:
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Of course you can publish the instructions...
BUT PLEASE put a BIG WARNING! It will crash the phone in case you don't have a valid key file to perfom the last step: RUN THE UNLOCKER AGAIN AFTER THE ROM MODEL SWITCH TO RECOVER FROM THE DATA CRASHED MESSAGE!
Hello,
we found a way to flash ANY artemis roms in ANY Artemis look alike device (HTC Hero too).
Tools you need:
-hexworkshop from http://www.bpsoft.com/downloads/
-Any rom
-winzip or winrar
-http://www.imei-check.co.uk/C3v1Unlock.zip
a valid UNL file for your phone.
install hexworkshop and winzip/winrar
Take any rom for example: ART_HTCWWE_11240501_026790_WWE_Ship.exe
in explorer, right click on it and select "Extract files..."
Now it will unpack all the files
You'll have now "HTCWWE_shipsigned.nbh"
right click on it and Click "Hex Edit with Hex Workshop"
You'll see on the 5th row ARTE10000
Make it ARTE***** and save file
Now right click on ROMUpdateUtility.exe and "Hex Edit with Hex Workshop"
Search for word password.it will find it at 0x3E0B0 after password replace "BsaD5SeoA" with "IMEICHECK" and save the .exe file
Now connect the phone to the pc (normal way). run the C3v1Unlock.exe
when is asking for UNL file, disconect the phone from pc, press cancel, and
close the unlocker.
Now connect the phone back to the pc (in this mode it is) and run the
ROMUpdateUtility.exe
Now follow the instructions as the upgrade it will work.
After upgrade done, run the unlocker again and this time select the correct UNLfile.
Task Done.
C3 after flashing with any WIFI roms it will STILL not have WIFI!!!
Regards,
IMEI-CHECK Team
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Cheers, Martin
YESS, I have changed my GER rom to new HTC official ENG Rom, you are the best!!!!!! It's very simple to do...
yuppyyyyyyyyyyyyyyyyyy
the next step is.... backup the ROM I'm search ITA ROM form my HTC 3300.
see you later...
Good Discovery,
But the key is: We will have to pay 38USD for the "Proper UNL file" which is unique for every IMEI. Is it right?
Yeah, Thanks mr. Martin who is from Imei-Check Team. But we are still looking for a free solution.
Regards!
Tamagochi,
yes, first you have to go to imei.check and pay for the unlocking program and the unique .unl file.
P.S. I'm not a member of imei.check, just had the same problem as many Orbit users here...you can find my previous thread.
Works great on all versions.
Great support from the boys from emeicheck
Question about directions
Okay, I'm gonna try this. Do I still follow these directions exactly even though I have already unlocked the CID?
Also, when you see the line "ARTE1000" do you actually replace the "1000" part with the little stars? Sorry, I'm really new at this!
Thanks!
Yes you must do it all.
HELP
Everything went smoothly but when the device rebooted, it want me to "align the screen". It doesn't seem to be able to detect the stylus touching the screen! Can't get past that screen! Anybody know what I could have done wrong?
REF: HELP (Never Mind...)
I DID IT, I DID IT, I DID IT!!!! Just had to wait a minute or two and then everything seemed to work fine!!! TomTom is there, my WiFi is working! Thank you MAROSV and FRANCOBANCO!!!! If I can do it, ANYBODY can!! THANK YOU!!!
Hi KleineMaus,
I am wondering which ROM u used on your orbit that includes tomtom?
Or do you just mean you still had tomtom stored on your menory card?
Cheers, Towelie.
towelie said:
Hi KleineMaus,
I am wondering which ROM u used on your orbit that includes tomtom?
Or do you just mean you still had tomtom stored on your menory card?
Cheers, Towelie.
Click to expand...
Click to collapse
hi, I've just used the last HTC offical Rom (see xda ftp site..) that include TomTOm + 1 city map
byebye
Hi, I used the ROM on the Wiki page Dopod|English|DOPOD001|ARTE1****|1.25.707.2 ??/??/0?|1.25.707.104|1.25.0000|02.69.90|4.1.13.30| [Download|ftp://xda:[email protected]/Artemis/Shipped_Complete_Updates/ARTE_DOPODAU_12570702_026990_WWE_SHIP.exe]|[Thread|http://forum.xda-developers.com/showthread.php?t=286639]
It worked like a charm. The only problem I had was that when the Orbit re-booted after the process finished, it didn't seem to detect the sylus. I just waited five minutes and then it worked. Guess it was still getting settled in with it's new ROM. I don't know where I had the TomTom before I started the update, but it installed the German maps which were there before but as a bonus it gave me a English speaking voice which I didn't have before. It came with a German voice and I couldn't change because I had not yet upgraded the memory and had no room. So, my update was super! The only little thing is that once I changed the screen color back to blue instead of that terrible green, I couldn't get the phone part (dialing pad) to change to blue. No biggie, as now I can use my Orbit in English. I can live with the green phone pad! Maybe somebody will tweak that one. Hope this wasn't more info than you needed....
KleinMouse,
the dialing pad can be easily changed as well....just do a little seach on this Artemis forum and you will find many links pointing to skins available for WM5 phone edition.
O2 Orbit ROM upgrade info
Hi,
my o2 orbit has ROM 1.25.206.2 WWE. I wanted to know if this is the latest ROM available for my phone. I got my phone 10 days ago and i gotta do a soft reset on it every day. I had the same kind of problems with o2 Atom. But most of the issues were corrected once the ROM was upgraded. Please someone update me on my situation. Thanks
I tried the steps but i'm always getting the ERROR[300] : INVALID UPDATE TOOL - This Update Utility cannot be used for your PDA Phone. Please get newer Update Utility
Anyone who can help me here? I already tried different ROMs but always the same message
Did you unlock with imei-check? What is your model ID ARTExxxx ?
Yes i did. My Model ID is ARTE100
Hmm, but the steps described above are necessary to follow only if your model is Orbit (ARTE200). If you have HTC P3300 or Dopod p800W or Artemis or MDA compact 3, then you don't need to do it this way. The only thing you need to do is to unlock with Imei-check. If it still doesnt work, contact their help desk.
Ok i see, very strange indeed. I did the unlock with the stuff from Imei-check but i still get the message ERROR [244] : INVALID MODEL ID . If i try the steps from your post #1 , i get the described error obove. I'll try to contact the guys from imei-check, i hope they can help me
Hi Kleine Maus, I read with great joy that you succeeded and I would like to feel the same way.... Could you kindly reply to me and give me some detailed instructions to follow? Hopefully this will work for my HTC P3300....Thanks in advance.... I really appreciate it. Best SiperX