Made the registry hack to display the"E" while in an EDGE area...
does this indeed change from an "E" to a "G", while in a GPRS area?
Or is it just a change of the icon?
Reason I ask, is that I drove from one end of town to the other, and noticed only the "E" never the "G"
am I just lucky enough to have EDGE all across town?
thanks!
Yes your just lucky enough. The hack just makes the icons different, if your in a gprs area then it will show a G.
yeah u must live in a place where their is good reception. just like me. hehe. Its E wherever I go.
billinvegas said:
Made the registry hack to display the"E" while in an EDGE area...
does this indeed change from an "E" to a "G", while in a GPRS area?
Or is it just a change of the icon?
Reason I ask, is that I drove from one end of town to the other, and noticed only the "E" never the "G"
am I just lucky enough to have EDGE all across town?
thanks!
Click to expand...
Click to collapse
I have tried this tweak on my qtek9100 with the original 9/22/05 ROM
Code:
If your network provider supports the Edge network (and your device does as well), you can use the following to show a little 'E' icon instead of 'G' icon when connected to an Edge network:
HKLM\Drivers\BuiltIn\RIL\EnableDifferGprsEdgeIcon = 1 (DWORD decimal)
I know cingular supports edge in my area. Also, I know that qtek9100 specification says that it is EDGE phone. However, I still never see "E" anytime. Is it the same hack that you guys have used, or is it something else ?
Please let me know.
Anup
Hi..
If u are editing registry, then after editing it power off yr device for 15 secs and then reboot...else find out the cab which does that hack..
araje said:
I know cingular supports edge in my area. Also, I know that qtek9100 specification says that it is EDGE phone. However, I still never see "E" anytime. Is it the same hack that you guys have used, or is it something else ?
Click to expand...
Click to collapse
There may be a reason why the EDGE icon isn't turn on by default. And that may be that the icon dosn't work in all networks.
Operators probably dont want you to know that you are getting worse data in some areas, but if they made the icon say E all the time that would be lying. By making say G all the time you dont know when you have better or worse bandwidth by just looking and they arent lying about the bandwidth you are getting.
On another note i noticed that in the windows directory on the stock usa mda rom there is a 1xRTT icon. Why are they wasting space with this?
hdubli said:
Hi..
If u are editing registry, then after editing it power off yr device for 15 secs and then reboot...else find out the cab which does that hack..
Click to expand...
Click to collapse
Well, yes I have cycled power on my device after doing this registry hack.
However, I have read somewhere that if "EnableDifferGprs..." key is not present in the same location, then this feature is not supported on your device.
I didnt have this key in the location specified, and like other tweaks, I had to create this key with the value 1.
Did your devices have this key already present in that specific location in the registry or you had to add it and set value 1.
Anup
araje said:
I didnt have this key in the location specified, and like other tweaks, I had to create this key with the value 1.
Click to expand...
Click to collapse
You have an old ROM that doesn't have this feature.
nickcerda said:
Yes your just lucky enough. The hack just makes the icons different, if your in a gprs area then it will show a G.
Click to expand...
Click to collapse
yes, HOWEVER, i have noticed, that this indicator sometimes 'hangs' and showing wrong icon. for example when i know that i've left EDGE area and i'm now in GPRS-only coverage, icon still shows [E]. in that case, best solution is to switch off and on phone module, to force network registration again, but sometimes just making a call (to refresh network information) is just fine and icon turns right...
hdubli said:
If u are editing registry, then after editing it power off yr device for 15 secs and then reboot...else find out the cab which does that hack..
Click to expand...
Click to collapse
Tried that out. The provider supports it, as i know from my friends Atom. Changed the value to "1" decimal and turned off the device for 15 sec.
Still no luck :-( ...
Am I missing something?
I don't rec my mails when i m in an "E" display mode. Buy whenever the display shows "G", i receive all my mails?
If this is the case, then how do i keep my htc touch from only using "G" and an "E"?
Thanks
Related
...long time lurker; first time poster...
did a search on this once and if it's here, sorry i missed it:
what is the reg-locale for ensuring the Bluetooth System-Tray Icon is enabled to launch when bt is active. since performing the following reg-edits, it no longer appears.
Increasing font cache and screen performance:
"HKEY_LOCAL_MACHINE\SYSTEM\GDI\GLYPHCACHE"
Change "limit" from "8192" (default) to "16384"
Increase general performance:
"HKEY_LOCAL_MACHINE\System\StorageManager\FATFS\"
Change "CacheSize" value from "0" to "4096".
"HKEY_LOCAL_MACHINE\System\StorageManager\FATFS\CacheSize=0x1000(4096)"
Change "EnableCache" value to "1"
"HKEY_LOCAL_MACHINE\System\StorageManager\Filters\fsreplxfilt\"
Change "ReplStoreCacheSize" value to "4096"
Enable Cleartype in landscape mode:
[HKEY_LOCAL_MACHINE\System\GDI\ClearTypeSettings]
Change "OffOnRotation" to “0”
also... i did this one and then reversed it since i learned (after the fact) that cingular 8125 is already b/g:
Enable 802.11g:
HKEY_LOCAL_MACHINE\COMM\TNETWLN1\PARMS
Assign a value of 1 to dot11SupportedRateMask
Assign a value of 8 to dot11SupportedRateMaskG
thanks to anyone making time to reply!
can someone confirm that their actually is a bt icon that resides in the system tray (top bar) when bt is enabled???
maybe it was a fluke that i actually saw it there for a brief period today?
maybe i'm seeing things?
I have not seen that icon in WM5. But I would like to have it there.
Oh its there alright. In fact, in the online help somewhere on my 8125 it actually lists the icons and their descriptions. One of them is the BT icon.
Its beyond my why there isn't an application that can indicate with a headset icon to notify you if your phone is paired to a BT earpiece. Someone had posted once PhoneAlarm did it, but alas. It does no such thing.
If anyone else knows of a program that will tell you if you're currently connected to a BT device, please speak now!
Ok, found out where the icon is listed. Go to the main WM5 online help on the device and go to Personalizing your device>Over of the Today screen>What do these status icons indicate?
Towards the bottom you'll see the icon... IT EXISTS IT EXISTS!... sigh
it does because today... it appeared for a moment. it played peek-a-boo while device was bugging-out. glad to know i wasn't seeing things. i wonder if having the clock reside in the sys-tray has anything to do with it???
i have found this application http://www.pocketpcfreewares.com/en/index.php?soft=1319 to at least show when the BT is on. It also tries to connect to a headset when there is an incoming/outgoing call. Not having a headset myself, I have not been able to test this function, but bt does turn on on a ring and turn off when I end the call.
i got this cab from somewhere here in the forum which shows the bt icon on the system tray, to allow you switch on/off bluetooth, i beleive it was designed for the universal but it works fine with my kjam (wizard).
majdi said:
i got this cab from somewhere here in the forum which shows the bt icon on the system tray, to allow you switch on/off bluetooth, i beleive it was designed for the universal but it works fine with my kjam (wizard).
Click to expand...
Click to collapse
Thanks! This .cab works great.
Now I only need the same type of icon for wifi. Anyone got such .cab file???
Works Great on KJAM JASJAR and EVEN A T O M !
Thanks.
I tried it on my k-jam but unfortunatelly... nada
I downloaded the cab file to my pc through the link, then copied the file to my devise and run the installation therein...
Am i missing something?
Weird
I installed this, and nothing happened, so I deleted the program, using "remove program" from Settings/System, and it started working. Go figure.
yeah,it works good on MDA Vario(czech TMO firmware)
pls have u got same cab for wi-fi ?
Styxer said:
yeah,it works good on MDA Vario(czech TMO firmware)
pls have u got same cab for wi-fi ?
Click to expand...
Click to collapse
Also still searching for the wi-fi one!
It Does not work on my QTEK 9100. It actually warned me that it's not compatible while trying to install..
Hi,
i would like to know how I can hide the network provider, i.e. Cingular, AT&T that's displayed on my smt5600. the reason is, i use my phone as my watch (i'm sure a lot of you do too) but the time is so tiny.... so i turned on the "large font" home screen and the time looks big enough but it's being pushed down and I'm only seeing half of the "time", because it's showing the "Cingular" above it.
just a side note, i'm also using a 3rd party software called facade to organize the schedule and the buttons, etc. this is the reason why the clock is on the bottom.
thanks.
slamming_sammy1 said:
Hi,
i would like to know how I can hide the network provider, i.e. Cingular, AT&T that's displayed on my smt5600. the reason is, i use my phone as my watch (i'm sure a lot of you do too) but the time is so tiny.... so i turned on the "large font" home screen and the time looks big enough but it's being pushed down and I'm only seeing half of the "time", because it's showing the "Cingular" above it.
just a side note, i'm also using a 3rd party software called facade to organize the schedule and the buttons, etc. this is the reason why the clock is on the bottom.
thanks.
Click to expand...
Click to collapse
You can use registry editor programs,for example:regedit
http://sharemobile.ro/file.php?id=98
and step by step method,100% work:
HKEY_LOCAL_MACHINE-
Software-
Microsoft-
RIL-
OperatorNames-
click to values-
click to menu and make New Value-String- and to Value name enter you code your network(ex.31410) and to Value data enter anything name you want!
Sorry for my english!
thank you for your help!
moalesipufos said:
You can use registry editor programs,for example:regedit
http://sharemobile.ro/file.php?id=98
and step by step method,100% work:
HKEY_LOCAL_MACHINE-
Software-
Microsoft-
RIL-
OperatorNames-
click to values-
click to menu and make New Value-String- and to Value name enter you code your network(ex.31410) and to Value data enter anything name you want!
Sorry for my english!
Click to expand...
Click to collapse
...And of course,restart!
Thought this might be a good place to start listing any quick tips and tricks you might have discovered.
To Lock Device quickly
Keep finger on the Red (Call End) button and it will bring up some options including keylock.
Not sure if anyone's noticed this but when I end a call on my Dual there is annoying little delay of about 3 seconds before the actual call is ended so I searched the registry and found this:
[HKEY_LOCAL_MACHINE\Software\HTC\PHONE\PhoneExtendSetting]
And I changed the value of EndCallTime from 3000 to 1000 re-booted and voila no more delays when ending calls
Hold the on/off button for soft reset.
Smart Dialing
This is an advertised feature but apparently not too many people are aware of it. Go to the phone app and start tapping the first couple of letters of the contacts name and the name matches will appear for you to choose from. I find this much easier than opening up the Contacts app and scrolling down to the name you need.
after pressing send for phoneapp u see last calls.
If u press left/right on the highlighted contact the phone switches through home/mobile/office...
HKLM\Software\HTC\Biotouch\Biotouch\ regulates the FPS of the cubeanimation.
Change "DownFPS", "LightFPS" und "UpFPS" to something higher for a smoother (and faster) animation.
Disable 3G, if not needed (it drains the battery faster than GSM):
Edit the registry key HKLM\Software\OEM\UMTS\OpMode and set it to "1"
Then also you could change that setting
Phone Settings --> Band --> Network Type --> GSM
To activate the changes, open the comm manager from the Cube, disable the phone and enable it again.
In italy with Vodafone I can't able to select also the Network Band GSM/UMTS to "GSM(900)" but I have to let it configured as "Auto" or "GSM(900+1800)+UMTS(2100)"
Bits
Ello, new here.. no idea if this helps a few Dual owners but..
Apps found to work on the touch dual:
S2u2 (iphone slide to unlock app), works like a charm:
http://forum.xda-developers.com/showthread.php?t=343256
HHC, HTC Home Customizer (name says it all), also working like a charm:
http://www.pocketemu.com/download4.html
gfreek, thnx for the EndCallTime key, works perfect and.. 1 less annoying feature to go
Things I'm still looking to solve:
1. Mp3 ringtone seems to fade out after picking up a call, for about 2/3 seconds the ringtone is still audible :S
2. Looking for settings for the Handsfree profile, i have an Lm959 bluetooth bracelet (how geeky, i know), works fine.. but only for calls, the device is capable of blinking the leds on receiving msgs, im looking for the settings to enable just that on the TD.
3. Polling frequency of the TD seems to be on the high side, f.e. it takes about 3 rings from someone before the TD starts "ringing", since voicemail kicks in @ ring 6 I miss a lot of calls.
I found a topic about just this problem with the touch(Elf) on sprint networks, with a quickcode (##7380# I think, well.. I'm not on sprint..so that doesnt work over here.. anyone with any clue would be welcome.. My current solution is disabling voicemail..)
ln1234 said:
To Lock Device quickly
Keep finger on the Red (Call End) button and it will bring up some options including keylock.
Click to expand...
Click to collapse
to do this quicker go to settings => long press end key
and select automatically execute and then lock device
holding the red button then locks the device in one press
You can invoke s2u2 instead normal devicelock
just install s2u2, rename Slide2Unlock.exe to EndKey.exe and copy all files to windows directory, with resco explorer.
the ilock doesnt seem to be working on my touch dual. when i try to go to settings, the screen goes blank.
You need to disable directdraw, do it via the registry as you can't access the settings.
raid said:
Disable 3G, if not needed (it drains the battery faster than GSM):
Edit the registry key HKLM\Software\OEM\UMTS\OpMode and set it to "1"
Then also you could change that setting
Phone Settings --> Band --> Network Type --> GSM
To activate the changes, open the comm manager from the Cube, disable the phone and enable it again.
In italy with Vodafone I can't able to select also the Network Band GSM/UMTS to "GSM(900)" but I have to let it configured as "Auto" or "GSM(900+1800)+UMTS(2100)"
Click to expand...
Click to collapse
Is there a way to add the "3G setting" directly in the Comm Manager as seen here : http://forum.xda-developers.com/showthread.php?t=354380 ?
GpsPasSion said:
Is there a way to add the "3G setting" directly in the Comm Manager as seen here : http://forum.xda-developers.com/showthread.php?t=354380 ?
Click to expand...
Click to collapse
Go with Total Commander to:
\\registry\HKLM\Software\HTC\CommManager and change the key
"SupportedFunctions" from 4 to 5
then make a new map named "5" (without the quotes)
go to that map and make a STRING named "default" and the string must
be "3G" (also without any quotes).
Then turn the phone off and on again and there is a 3G setting in your CommManager. I did not manage yet to add a icon in front of it
(and also not tested the working of the new setting)
Thanks, someone also pointed me to Schaps' app that has that setting http://forum.xda-developers.com/showthread.php?t=317070
GpsPasSion said:
Is there a way to add the "3G setting" directly in the Comm Manager as seen here : http://forum.xda-developers.com/showthread.php?t=354380 ?
Click to expand...
Click to collapse
Another way ...
Go to ... Start > Settings > Phone > GSM/UMTS Band , Set Network to "GSM" & Leave GSM to "Auto".
nightfear said:
Another way ...
Go to ... Start > Settings > Phone > GSM/UMTS Band , Set Network to "GSM" & Leave GSM to "Auto".
Click to expand...
Click to collapse
nice one..thanks
dapoldi said:
3. Polling frequency of the TD seems to be on the high side, f.e. it takes about 3 rings from someone before the TD starts "ringing", since voicemail kicks in @ ring 6 I miss a lot of calls.
I found a topic about just this problem with the touch(Elf) on sprint networks, with a quickcode (##7380# I think, well.. I'm not on sprint..so that doesnt work over here.. anyone with any clue would be welcome.. My current solution is disabling voicemail..)
Click to expand...
Click to collapse
that is driving me MAD at the moment. I'm missing almost all my calls.
Wish there was a way to change the amount of rings before voicemail kicks in.
please help someone!
Lord of the Badgers said:
that is driving me MAD at the moment. I'm missing almost all my calls.
Wish there was a way to change the amount of rings before voicemail kicks in.
please help someone!
Click to expand...
Click to collapse
ah found it, at least for UK Orange people:
Please bear in mind that the following code is only valid for phones on the Orange UK network.
The code to set the length of time your phone rings is:
**61*07973100123*11*??#
Where ?? is the time in seconds, e.g. to set the ring time to 30 seconds you would type the following code at the standby screen then press the green send button:
**61*07973100123*11*30#
To make your phone ring for only 10 seconds:
**61*07973100123*11*10#
The code works in 5 second intervals, i.e. you can set 5, 10, 15, 20, 25 & 30 seconds.
Click to expand...
Click to collapse
works fine. thank god.
Lord of the Badgers said:
that is driving me MAD at the moment. I'm missing almost all my calls.
Wish there was a way to change the amount of rings before voicemail kicks in.
please help someone!
Click to expand...
Click to collapse
go to the phone application
Settings->Services->call forwarding
Set the time to what you want
Arnon
Does anyone know how i can change the phone signal icon to show E when i'm connected the internet? I don't want the network icon.
I've seen some roms do this, but I don't know how to enable it.
right now all i see is a coat hanger and the signal bars.
Thanks
Show Edge network indicator instead of GPRS
If your network provider supports the Edge network (and your device does as well), you can use the following to show a little 'E' icon instead of 'G' icon when connected to an Edge network:
Code:
HKLM\Drivers\BuiltIn\RIL\EnableDifferGprsEdgeIcon = 1 (DWORD decimal)
To disable again:
Code:
HKLM\Drivers\BuiltIn\RIL\EnableDifferGprsEdgeIcon = 0 (DWORD decimal)
Note that your device -and- your network operator need to support Edge, otherwise you won't see it. Also note that if you connect to GPRS, you will still see the 'G' icon.
Click to expand...
Click to collapse
http://wiki.xda-developers.com/index.php?pagename=WM5_Tweaks_Other
About 1/4 down the page.
thanks, but this not what im asking for.
I already knew about that.
I want the E/G icon to show up in the signal bar icon. not the network icon.
there was a rom I used that had this feature. and I want to enable it for the current rom im using.
I hope someone knows what im talking about.
You might want to try asking the Wizard Upgrading or Wizard Mobile 6 boards, then, because this is just a general catch-all Wizard board.
You might also try the built-in search. It's pretty good (not always) at finding what you're looking for, if you try different ways of saying it.
Thanks, I'll post in the other boards.
I already tried search and looked on the wiki, but It only tells me about the GPRS icon.
Hi,
another little tool by me. This time it is to toggle between 3G and GPRS. Basically it does the same as if you click on the 3G button in the CommManager.
The main usage would be in scripts or through a shortcut as it has no GUI and toggles it quite fast.
History:
v1.0
initial release
Will this toggle between Auto and GSM modes or we can choose WCDMA (3G) only, too?
command line?
Hi
Thanks for this application. Good idea. I'll test it out.
Does this support command line functions, such as switching from "Auto" in the band page to "GSM" or "WCDMA"? If not, can this be implemented?
Many thanks
andrew-in-woking
pilgrim011 said:
Will this toggle between Auto and GSM modes or we can choose WCDMA (3G) only, too?
Click to expand...
Click to collapse
I only tested it on my GSM device. So I can't say if it will work for CDMA devices.
Basically it does the same as if you click on the 3G button in the CommManager.
andrew-in-woking said:
Hi
Thanks for this application. Good idea. I'll test it out.
Does this support command line functions, such as switching from "Auto" in the band page to "GSM" or "WCDMA"? If not, can this be implemented?
Many thanks
andrew-in-woking
Click to expand...
Click to collapse
There are no commandline parameters yet.
dosent work on samsung omnia it will be nice app when it will work
Doesn't work on my 614c, either. Too bad, looks like a neat app.
this has been done already by bandswitch and commmgrpro,commmgrpro above no other is king in this category
dyetheskin said:
this has been done already by bandswitch and commmgrpro,commmgrpro above no other is king in this category
Click to expand...
Click to collapse
Those apps are fine, but they do much more than what this does and have UIs, which are unnecessary if you just want something to use in ThrottleLauncher or UltimateLaunch. I think this is a great tool - I just wish it worked for a non-HTC phone.
Nice little app. Very useful to launch from Programs in TF3D...
MarcLandis said:
I only tested it on my GSM device. So I can't say if it will work for CDMA devices.
Basically it does the same as if you click on the 3G button in the CommManager.
Click to expand...
Click to collapse
WCDMA is 3G, not CDMA... Stupid name but whatever...
This will be a great tool for use in scripts. Problem with toggling, tho, is that in order to get what you want, you have to know the current state. I would really appreciate some basic CL parms like -3Gon and -3Goff
I would like to use your application to change the status of the 3G connection through a button that run the program, and I would like the icon button changes depending on the state of the 3G connection.
Place where the register is saved the state of the 3G connection?
Sorry for my english.
Very nice program. Does exactly what it should.
But it has no icon yet. Will there be one in the future?
Indeed, an icon would be nice.
For CDMA users:
http://www.ppcgeeks.com/forum.ppcgeeks/showpost.php?p=781479&postcount=18
Fail on Tilt 2
I tried this on my Tilt 2 and it seems to only change the toggle in the commmanager, but it doesn't seem to change my actual connection.
Hi MarcLandis,
thank you for sharing this with us so we can test it. So please read my...
Report:
i have tested toggle 3g on my phone (signature). What i have seen is that in the taskbar the icon is changing from 3g to flight mode and back when i use the exe again.
But when i use the hardware phone button i can take normal phone calls without the code popup and the icon is changing from flight mode to 3g. When i close the phone app the deafault 3g icon stays allways.
So i think it is not working on my HD2.