choosing wifi over GPRS - 8125, K-JAM, P4300, MDA Vario General

When I look at the list of connected networks, I see these:
T-Mobile GPRS (GPRS)
[my wifi] (Wi-Fi)
The wifi connection is set as "connects to: The Internet".
Sometimes when I go to check email, it'll connect to GPRS even though I have a wifi connection. Why doesn't it use the wifi? How can I force it to use wifi instead of GPRS?
t-mobile with the 2.17 ROM, 2.07 radio.

Bump....I'd like to know the same thing.

Assuming you will never want to use GPRS....if so, write down the settings
Go to Start>Connections>Connections>Delete GPRS
At least that's what I think I did

Make sure that both your wireless lan card and wireless connection are set to connet to the internet. I had my phone wifi set as connecting to "the internet" but when I clicked on my home wireless connection in the list of available access points it was set to connect to "work". Hopes this helps.

I am wanting to know the answer to this problem also... I dont have edge or Gprs and I want to be able to check my pop & pop3 email using Wifi..
Thanks!

Does anyone know how to solve this problem???

Related

WIFI and GPRS connection priorities

Hi all,
I have an XDAII from the Spanish carrier Movistar (TSM500). I want the device to access internet. I have WIFI in my office, so I would like to use this infrastructure in the device instead of GPRS.
I have a SDIO card from SOCKET that works correctly with the device and I can connect internet via proxy.
I would like to know how must I configure the connection settings in order to make it transparent. I mean, if there is WIFI the device must use WIFI it not the device has to use GPRS.
Does anybody know the settings I must to apply to the device network configuration (work,internet…) in order to get this WIFI, GPRS priorities?
Thanks and regards from Spain
...and to make your question more complicated, to setup wifi with proxy, gprs with no proxy and mms connection with no proxy. All these together?
so be it - manemoi
T,
Exactly!
Hey Manemoi, that's EXACTLY What I would like!
Is there a way to have the Magician choose this automatically? For instance, I can use my Sandisk SD WiFi 256 only when I set both my ISP and Work settings to an emtpy profile. It then seems to know it should use the WiFi connection available. I can then Internet, send mail Everything! Perfect! When I take out my WiFi card and activate my Active Synch with BlueTooth, it works too, Can internet over Active Synch without problems. But Mail will connect but then not send mail for some reason...
Whenever I want to use GPRS, I gave to goto connections and then manually change the modems there for ISP to my GPRS Modem Setting. Isn't there an easier way? Can't Internet explorer be told to use whatever conection available? Instead of ALWAYS connection to whatever is set under the My ISP setting?
I'd be interested if you ever got an answer to this as I am now at the same point
I'd be interested if you ever got an answer to this as I am now at the same point
Anyon e work this out?

XDAIIi Wifi Problem

I tried to use Wifi in a cafe, the wireless lan manager show connected to network, buy when i open IE, my PDA always trying to connect with GPRS service. the wifi seems not working, and i could not open a web page.
could some one tell me what should i do :idea:
try picking another network in
system connections connections advanted
pick something other then my isp or what ever the gprs connection is called
hi! thx for reply
i tried today in starbucks, but the GPRS seems still comes up, i picked up my work network, tap edit, there are only three option, 1, auto pick 2, O2 active
3, WAP network
when i open IE, it always inform me, connect to O2 active, then Dialed: Then answering modem has disconnected. To check your connection setting and change them if needed, tap setting.
the wifi connection is realy confuse me, dose any one know how to connect to internet in a cafe or airport??
When you've got wifi enabled make sure that Settings->Connections->Network Cards has My Network Card connects to "The Internet".

Wi-Fi Problem with MDA!

I just bought the new T-Mobile (USA) MDA a couple days ago, a version of the HTC Wizard.
I have been able to connect with GPRS/EDGE, and seem to be getting EDGE speed, which is nice (my first EDGE phone).
However, no such luck with Wi-fi.
At my house, I can easily connect, at all times, with a few different wi-fi networks, with my wi-fi enabled laptop, and with my older PPC--an IPAQ 2210, with Spectec SDIO Wi-Fi card, can browse the web via Wi-Fi, etc.
The MDA does connect to Wi-FI, appears to be connected to it. (After turning it on in Connection Manager, of course.) But I cannot access any web sites with it. On trying to do so with PIE, I always get the error message:
"The page cannot be displayed or downloaded because the connection was lost, Check the connection and try again later."
I have not once been able to access one web site via Wi-Fi, with the MDA.
Can anyone help with this?
Thank you.
I ahve the same problem and have not figured out how to solve this...
Can anyone help us?
same problem here, also with t-mobile as provider. can it be a problem related to t-mobile???
me said:
I just bought the new T-Mobile (USA) MDA a couple days ago, a version of the HTC Wizard.
I have been able to connect with GPRS/EDGE, and seem to be getting EDGE speed, which is nice (my first EDGE phone).
However, no such luck with Wi-fi.
At my house, I can easily connect, at all times, with a few different wi-fi networks, with my wi-fi enabled laptop, and with my older PPC--an IPAQ 2210, with Spectec SDIO Wi-Fi card, can browse the web via Wi-Fi, etc.
The MDA does connect to Wi-FI, appears to be connected to it. (After turning it on in Connection Manager, of course.) But I cannot access any web sites with it. On trying to do so with PIE, I always get the error message:
"The page cannot be displayed or downloaded because the connection was lost, Check the connection and try again later."
I have not once been able to access one web site via Wi-Fi, with the MDA.
Can anyone help with this?
Thank you.
Click to expand...
Click to collapse
I have exactly the same problem
I guess you could try going under "Settings" "Connections" "Network Card" and make sure your network card is set to connect to "The Internet"
Select your wireless card and then make sure the drop down says "The Internet" and hit ok.
Also, make sure your GPRS Connection settings aren't setup to use T-Mobile's proxy. When your gprs is setup to use a proxy for web browsing, PIE will attempt to use the proxy with any connection. And by proxy, I'm not talking about an APN or anything.
Are you running security on your router? If so try shutting it off to test or try to connect to someone elses WiFi network to test.
wagz said:
I guess you could try going under "Settings" "Connections" "Network Card" and make sure your network card is set to connect to "The Internet"
Select your wireless card and then make sure the drop down says "The Internet" and hit ok.
Click to expand...
Click to collapse
I spoke with a TMob customer service rep about this a couple weeks ago, and this is basically what he told me to do. A T-Mobile HotSpot (Starbucks, etc) should work without making any changes. But if you want to use your own WiFi connection, you have to do the following:
Start Menu -> Settings -> Connections Tab -> Connections Icon
Select Advanced Tab -> Select Networks
Change first dropdown to "My Work Network".
Click OK, OK.
Then when you want to roam with GPRS/EDGE again, you have to change it back to "T-Mobile GPRS".
Very annoying to say the least. If anyone knows a better way to do this, I'd love to hear about it.
This works for me:
Start Menu -> Settings -> Connections Tab -> Connections Icon
Select Advanced Tab -> Select Networks
Change the first dropdown to My Work Network
Change the second dropdown to T-Mobile GPRS
Make sure My Work Network is set to connect to the internet, but has NO proxy settings.
Make sure T-Mobile GRPS is set to connect to the internet, but HAS proxy settings.
Magic!
frycow, you rock!!
That worked perfectly!! I hated that I had to keep switching networks whenever I wanted to go online via GPRS or wifi!!
Thanks!!!
frycow,
wow. that sounds great. but I can't get it working. could you take a couple minutes to walk me (and I'm sure others too) through your exact settings? especially the proxy settings.
thanks!
frycow is a freakin champ....that did the trick!! I've been WAITING to get this working!!
AHHHH, AND IT FINALLY GOT MY POCKET MSN TO START WORKING TOO!!!! Still doesn't work on GPRS, but it certainly works on Wi-Fi!! I suppose the last thing would be to get it working on both!! regardless, this is SWEET!!
I can´t get it working :evil:
When I Change the first dropdown to My Work Network and after that tryn to sync without having wifi enabled, the device does not connect with GPRS..., solutions...
frycow, hazchem, djswivel:
Could one of you help out Paltkugen and I? Both of us can't get it working. If you could let us know the specific settings, including the proxy settings, I would really appreciate it. Its so frustrating to know it works for some people, but not being able to get it going.
Thanks!
I did EXACTLY what fry posted....follow this carefully
Start Menu -> Settings -> Connections Tab -> Connections Icon
Select Advanced Tab -> Select Networks
Change the first dropdown to My Work Network
Change the second dropdown to T-Mobile GPRS
Click Edit on the My Work Network dropdown -> Proxy Settings Tab
Check the first box (This network connects to the internet), but NOT the second (This network uses a proxy server to connect to the internet)
Now do the same for the T-Mobile GRPS settins in the edit menu, only check both boxes this time. Then type in 216.155.165.50 as the proxy server. From there you should be good.
djswivel said:
I did EXACTLY what fry posted....follow this carefully
Start Menu -> Settings -> Connections Tab -> Connections Icon
Select Advanced Tab -> Select Networks
Change the first dropdown to My Work Network
Change the second dropdown to T-Mobile GPRS
Click Edit on the My Work Network dropdown -> Proxy Settings Tab
Check the first box (This network connects to the internet), but NOT the second (This network uses a proxy server to connect to the internet)
Now do the same for the T-Mobile GRPS settins in the edit menu, only check both boxes this time. Then type in 216.155.165.50 as the proxy server. From there you should be good.
Click to expand...
Click to collapse
That is exactly what I did too. Just tried it again and I can't use GPRS to surf. I have Wifi turned off. GPRS is not connected. I open PIE and go to some URL (google.com). GPRS starts connecting and successfully connects to T-Mobile GPRS.
Then, for about 30-60 seconds, the status bar says "Locating". Then an alert pops up that says "The page cannot be displayed or downloaded because the connection was lost. Check the connection and try again later."
Next, I turn on WiFi. It conects to my local WiFi network. It is still connected to T-Mobile GPRS too. I go back to PIE. As soon as I try to goto a URL, the GPRS connection drops, and again it says "Locating..." for a while. Then the same alert pops up again.
So now that GPRS isn't connected and just WiFi, I try going to the URL again. Same results.
Next I try turning off WiFi. Now there are no connections. I restart WiFi and there is just a WiFi connection. Same results in PIE.
I thought maybe the proxy is the problem, so I turned off the proxy in GPRS. When I do this, the checkbox "This network connects to the internet" won't stay checked. Even if I check it and click ok, when I go back it is unchecked. And when I did this, I couldn't even connect with GPRS. And with WiFi on, it would connect to Wifi, but going to a page would immediately pop up an alert that says "Cannot Connect with current connection settings. To change you connection settings, tap Settings."
I added the proxy back in and then tried changing the GPRS access point name from wap.voicestream.com to internet2.voicestream.com and internet3.voicestream.com. internet2 wouldn't even make a connection, but internet3 did. however, i still couldn't locate pages in PIE. So I changed it back to wap. I think my unlimited GPRS plan is configured the VPN way, so I remember having to use internet2 or internet3 in the past.
Could the proxy server not be working right for me? Is it possible that I cannot locate the proxy because I'm configured in a non-standard way (with a different access point - internet3) than most?
I think I'll call tmo and see if I can get changed to the regular AP (wap). I'm not using VPN stuff right now anyway. If anyone has other ideas, please let me know.
Thanks again!
I think i have a work around. but involes changing it back and forth when switching btwn wifi and gprs..
created two connections.
one with proxy and one without.
im only able to surf gprs with proxy.
when connecting via GPRS set both networks to connect to PROXY.
when using WiFi, set both networks to connect using NOPROXY.
that should work. at least it worked for me. tried only 2 pages and it loaded for both. GPRS used myvoicestream and wifi google.
yowzator said:
I have Wifi turned off. GPRS is not connected. I open PIE and go to some URL (google.com). GPRS starts connecting and successfully connects to T-Mobile GPRS.
Then, for about 30-60 seconds, the status bar says "Locating". Then an alert pops up that says "The page cannot be displayed or downloaded because the connection was lost. Check the connection and try again later."
Next, I turn on WiFi. It conects to my local WiFi network. It is still connected to T-Mobile GPRS too. I go back to PIE. As soon as I try to goto a URL, the GPRS connection drops, and again it says "Locating..." for a while. Then the same alert pops up again.
So now that GPRS isn't connected and just WiFi, I try going to the URL again. Same results.
Next I try turning off WiFi. Now there are no connections. I restart WiFi and there is just a WiFi connection. Same results in PIE.
I thought maybe the proxy is the problem, so I turned off the proxy in GPRS. When I do this, the checkbox "This network connects to the internet" won't stay checked. Even if I check it and click ok, when I go back it is unchecked. And when I did this, I couldn't even connect with GPRS. And with WiFi on, it would connect to Wifi, but going to a page would immediately pop up an alert that says "Cannot Connect with current connection settings. To change you connection settings, tap Settings."
I added the proxy back in and then tried changing the GPRS access point name from wap.voicestream.com to internet2.voicestream.com and internet3.voicestream.com. internet2 wouldn't even make a connection, but internet3 did. however, i still couldn't locate pages in PIE. So I changed it back to wap. I think my unlimited GPRS plan is configured the VPN way, so I remember having to use internet2 or internet3 in the past.
Click to expand...
Click to collapse
Earlier today I had been trying to get VM Net Browser or Resco File Explorer to work, and they *were* working, albeit very sporadically. Sometimes I could see whole windows network complete with shared files and directories, other times I could browse to my computer and it wouldn't show anything as being shared. Looking for a solution, i found this thread.
I followed the recommendations of the previous posts and got exactly the same results as yowzator, including the weird thing with the "This network connects to the internet" checkbox unchecking. My GPRS access point is also named wap.voicestream.com - not sure if that matters.
However, I know that I was having at least partial wi-fi success before trying this fix or I wouldn't be able to have seen my home network. So I gave up on this fix and put everything back to the default - GPRS for programs that automatically connect to the internet, no proxy, and My Work Network for programs that automatically connect toa private network, with "This network connects to the internet" unchecked because it's impossible to check it and expect it to stay checked.
I tried surfing around to a few pages with wifi only (connections shows me connected to my network, I turned off the phone icon in the comm settings, and tapping on the connectivity icon on the taskbar didn't have GPRS listed) and amazingly, some of them worked - though the "locating" process seemed to take a while, they sometimes seemed to load faster than with GPRS (especially if I let my MDA go to sleep and then turn it back on again).
And then they don't work again, without me doing anything. So I don't think the fix we've been trying is a true fix to the problem - if it was then then pages would *never* load with the proxy disabled. Right?
I've been wondering if the "modem" tab under My Work Network is supposed to be blank . . . even if it's using wifi it seems like a poor UI design to not have a checkbox or something saying "this connection is for wifi and not dialup".
I am using the 2.17 ROM update. My wireless router is a D-link DI-624 extreme g. I'm using WEP encryption.
I am crying . . . tears . . . of confusion.
SOLUTION!?
This works for me (suggested in another thread):
1. Add the following to the registry:
HKEY_LOCAL_MACHINE\COMM\TIACXWLN1\PARMS:
DWORD dot11SupportedRateMaskG=8
(Note that there is already a key in the registry called "HKEY_LOCAL_MACHINE\COMM\TIACXWLN1\PARMS: DWORD dot11SupportedRateMask=1" - you should leave this alone)
2. Do a soft reset.
3. Go to your wi-fi settings -> Power Mode tab -> Best Performance (without this step it didn't work for me)
4. Turn on wi-fi and connect to anything in internet explorer. It should seem blazing fast compared to GPRS.
Note that this assumes you haven't done any of the fixes in this thread. That is to say, leave it with GPRS for programs that automatically connect to the internet (with no proxy), and My Work Network for programs that automatically connect to a private network, with "This network connects to the internet" unchecked because it's impossible to check it and expect it to stay checked.
So far (for a few minutes anyway) this is working for me! Even Resco File Explorer seems to mostly work - I can map my PC's shared folders and see my stuff reliably, as far as I can tell. VM Net Browser is still wonky though.
The thread this solution comes from is http://forum.xda-developers.com/viewtopic.php?t=38898&start=0&postdays=0&postorder=asc
Hi,
tried that solution
(I have a thread below)
still falls over on "locate".
I have no home network so I have never got anything working - connects fine on a public hotspot, but as I say, fails on locate.
I've had enough - may either phone T-mobile pay CS - something I really don't want to do out of principle - or just send teh phone back.
any new info on this? can seem to get it to work.
i have configures it many ways as suggested above. only time i was able to browse on wifi was with no proxie was set up. i connect through another network, (the mda automatically hooks you up to all avalible networks) but that only lasted a few minutes.
is there even a chance i could someone at tmobile even help me??? anyone here call them and get got service/help with getting it to work?
thanks
skot

Wi-Fi without GPRS, possible?

Hi guy,
Now, I'am using XDA Neo with the latest dopod rom, and enjoy it very much.
I always connect the internet via WLAN at my home and sometime at hotspot in public.
I found a problem, when the signal of access point is low or none my neo try to connect GPRS automatically!!!
I don't want it to be connected and don't want to delete the GPRS setting cause sometime I wanna use it in somewhere that doesn't have a hotspot.
Is it possible to do it: when I surf the internet via WLAN no matter the signal low or none, the GPRS would not be connected?
Thanks guy
Hey, I don't know if this works for you but whenever I connect to the Internet via Wifi I turn off the phone function. I'm not sure if this is a solution for you because as you might be aware you can't receive calls anymore. :wink:
If there is a more eloquent solution to this I'd be very much interested too.
Jayxz said:
Hey, I don't know if this works for you but whenever I connect to the Internet via Wifi I turn off the phone function. I'm not sure if this is a solution for you because as you might be aware you can't receive calls anymore. :wink:
If there is a more eloquent solution to this I'd be very much interested too.
Click to expand...
Click to collapse
Go Start>Settings Then connections tab
Click Connections Icon then the 'Advanced' button
Click 'Select Networks' then in the Top drop down selection boc " programs that automatically connect to the internet should connect using'
change this to either 'My Isp' or 'My Work Network'
'My Isp' is what i use, as this has no connection set under it
then if you have no wifi access gprs can not connect
when you wish to use gprs do the above, except select whatever you connection was originally and gprs will work again

Mail doent connect through wifi - only with data!

Hi there kind people of XDA.
after installing a new rom I encouter a problem with setting up my gmail account. It seems as if the HTC mail client isn't willing to work with my wifi connection and only working with the data (which is disabled).
when I send/recieve, it tells me that it cannot connect and that I should press - settings. After going into settings I have 3 options for my work connection.
the first one is where I think the problem is:
*add a new modem connection.
after I chose that I've been asked to choose a modem and I dont have a wifi ot the broadcom lan card. only bluetooth, cellular line, cellular line (GPRS) and hayes compatible on COM1.
Any idea?
go to settings, connections, connections, advanced, select networks. Then change the first setting to 'work'. I have a dutch version, so the names might be slightly different.
thanks but I already tried it. The problem is that when setting up a new connection I cant use the broadcom as the connection modem!
Now I know my phone isnt using the same network as you. I have only one cellular account that I connect to. For this example I will call it "My Connection" I have that set in Network management to be the default connection for the internet.
Now when I go to my email connection settings I can choose that connection or a few others. If I choose "My Connection" then the email will only connect though cellular data. But if I choose "Internet" then it will connect through both.
So when I have wifi present I can connect with email, mms, surf with opera, and update weather all through wifi. When my wifi goes down or gets turned off everything reverts to cellular data.
ditto - on 1.48 i get 'Internet' as well as the T-mobile internet and T-mobile MMS settings. internet seems to latch onto anything that has a public ip - and starts with wifi.
I have found that one thing which stops email sync is not wifi/HSDPA data, but rather the exchange domain setting disappearing sporadically.
do u have bsb tweaks the same thing happend to me and in bsb i had wifi disable go in bsb and enable it.
please see if at
http://forum.xda-developers.com/showthread.php?t=639730
you find something which may be of help.

Categories

Resources