Database Users

GPRS Monitor

I cannot install GPRS Monitor from myO2 CD, it says i need to update my ROM, i did a corporate install btw
Anyone else had any probs?

Another forum member had this same problem when installing the ClearVuePDF Reader also supplied by o2 as part of the HTC application suite. He has the MDA, but flashed with the o2 Exec ROMs and then installed in Corporate mode.
From work we did together, it appears to be just the install program that was not validating his device. When I tried a hard-reset and Corporate mode install, I had no problems installing. However, its beginning to look as though a hard-reset does not totally clear the Exec's memory. In his case, I found all the individual files and registry settings needed for ClearVuePDF to run and he copied those to the device. Runs perfectly for him like that.
So I'm afraid you'll have to find somebody with the o2 version of GPSMonitor installed and get them to determine all the files/locations and registry-settings needed to get it to run. Unfortunately I don't have a GPRS connection or GPRSMonitor installed.
Just a thought. Have you yet tried a full o2 Personal mode install on your device? It just might be this action that puts 'something' in memory that is not cleared by a hard-reset, and that 'something' might be what the install program is looking for.
Sorry that I can't be more helpful.

No problem thanks for your help

dazzled said:
I cannot install GPRS Monitor from myO2 CD, it says i need to update my ROM, i did a corporate install btw
Anyone else had any probs?
Click to expand...
Click to collapse
I did a basic install and I get the same error. Sorry, Not much help though.
Daz

Me too. The ClearVuew PDF reader is rubbish! Text misalighed all over - Adobe with pixel doubling is better than this.

Please try this
Could one of you having a problem to install the o2 supplied GPRSMonitor, please try installing the attached .CAB after copying it to your device.
This CAB is extracted from the CD-ROM install program, so hopefully skips the validation stuff. With luck you might be able to get around the failed validation by installing from this CAB.
Note: Even if asked to install to Storage Card, the o2 supplied version (2.3.0 build 600) puts very little there, most goes into device memory. The current version 2.41 from spb will obey the instruction to install to SD-Card, but wasn't reliable when run from there - the monitoring part aborted four times in 10-minutes whilst I was playing with it.
Unfortunately, since I don't have the install problem, I can't test this install out.

It works a treat. Thanks muchly!

Ward said:
It works a treat. Thanks muchly!
Click to expand...
Click to collapse
Am I glad about that - I was in the midst of trying to locate all the files/registry entries needed for a manual install.
Perhaps I can go to bed now! :wink:

I also managed to 'locate' another copy and it works fine, thanks for all the help.

astage said:
However, its beginning to look as though a hard-reset does not totally clear the Exec's memory.
Click to expand...
Click to collapse
I can confirm this but with other files. After several hard resets (even with the clear storage icon), the pictures I had taken were still there.

Tron_Of_Borg said:
astage said:
However, its beginning to look as though a hard-reset does not totally clear the Exec's memory.
Click to expand...
Click to collapse
I can confirm this but with other files. After several hard resets (even with the clear storage icon), the pictures I had taken were still there.
Click to expand...
Click to collapse
Ouch! I didn't realsie it was as bad as that.
The situation is made worse by the backup program I'm using (Sunnysoft Backup Manager) not backing up all the data and settings. Neither does it perform a true restore - just merges the backup with what's there after the hard-reset.
Unfortunately, I'm used to HP's backup applet from the Jornada 928; which performed a total backup/flush restore. Are there any other applets for WM5/universal that really performs a full backup/restore?

Does anyone have this cab please? I have just bought a new O2 exec and am having the same problem with it saying my ROM version is too old!!

sorry ignore that post! Work computer blocked the file out

I am running my XDA EXEC in basic mode. When I tried copying the .cab file to my device and running it from there , still get the problem.
Any suggestions ?
I was running personal mode then switched to basic mode, could this cause the problem.
Thanks for you replies in advance.

Cannot remove GPRS monotr app
I installed this file to test it out om M3000. Unfortuntely I cannot seem to uninstall it now! It doesnt show up in my Program list - How do you uninstall it?
I looked in the \\windows folder and removed all files and shoretcuts I could find, but its still showing up on my 'today' screen with an error.
Any ideas? The registry?
Cheers
rob

Linuxgeek:
I was also getting the ROM version problem installing programs to my SD card on my O2 exec. Since I'd only just added the card and was running the basic installation, I did the following:
1) Hard reset
2) Personal Install
3) Re-install ActiveSync on PC
This did the trick. Thankfully I like the Personal install best anyway, but I don't know if that step was necessary.

Tried it. Still get the problem :-(

My mistake - I managed to install the Clearvue PDF program, not the GPRS monitor program. I'm still getting the ROM version error with the GPRS monitor program, but I've not tried the above download yet.

Anyone got any other ideas to fix this problem.
Shame O2 don't have an update to fix this problem on their website.

I've now tried the CAB posted above by astage and I can confirm it worked for me. Just copy the CAB to your device and then open it to start the install.

Removing Applications???

Hi,
I recently installed 'Kick off slot machine' game on my XDA mini s and when i go to 'remove programs' it wont remove it. I've tried soft reseting.
How can i get rid of it?
Can i just go into file explorer and delete the files in its program folder?

yes but u would be better off removing the reg entries aswell allthough it wont cause harm.
tried removing using active sync , add remove programs , as sometimes that works for me where the one on the device does not work.

I have found that quite often uninstalls just don't work. For example, before I resorted to a recent hard reset, I had only a few megs of RAM available. Turns out it was because although it "appeared" that such things had been uninstalled, they had in fact not been uninstalled.
The way I do it now, and I reckon this is the only way to do it, is to go to Add/Remove programs in Activesync and uncheck the box of the app/game to be removed. This seems to work (even on apps installed by CAB or on other machines).
Stegz

Ok thanks.
By the way, how do you find and delete reg entries? Which folder are they stored in?

Use SK Tools, it is the best soft for cleaning and everything
-www.s-k-tools.com

You'll need something like PHM Regedit, or I use Total Commander. I'm no expert but you'll be able to get help with registry keys etc here.
Alternatively, purchase MemMaid which (I think) removes redundant registry entries.

Oh ok, thanks very much.
Just one more quick question, if you install something, remove it, then decide you want it installed again does it just overwrite the previously created reg entries?

does it just overwrite the previously created reg entries
Click to expand...
Click to collapse
Yes, if it is the same version of software.

fresh123breeze said:
Use SK Tools, it is the best soft for cleaning and everything
-www.s-k-tools.com
Click to expand...
Click to collapse
I was using this amazing application but after it's installation i was unable to uninstall any program from "Add/Remove Programs". Not even S-K Tools. The only solution was a hard reset. Do you have anything on mind for this issue?
P.S: The version i was using: 2.2.10

Yes, developer knows about this, he said, new version fixed.
I have ver.2.3.15.6 and tested, good things, Backup is working in WM5.

fresh123breeze said:
Yes, developer knows about this, he said, new version fixed.
I have ver.2.3.15.6 and tested, good things, Backup is working in WM5.
Click to expand...
Click to collapse
Hi, was wondering does it backup contacts and have you tried restoring after hard reset?

Yes, I did. The only one problem, SK Tools made funny records about
installed software, so in the list, You have only what was installed after
You installed SK Tools. I think it was already fixed, but didn't test it.

thanks fresh123breeze,
think i'll go for it. its not a lot to pay for what it claims it can do.

Blank screen of writing a new text message on 818pro

Blank screen of writing a new text message on 818pro.
Is there anyone can help? There will have no problem after hard reset, it seems one of the programs causes this problem. But does anyone know the reason? Is it memory insufficient?

scott4 said:
Blank screen of writing a new text message on 818pro.
Is there anyone can help? There will have no problem after hard reset, it seems one of the programs causes this problem. But does anyone know the reason? Is it memory insufficient?
Click to expand...
Click to collapse
I have absolutely not clue what you want here. Could you rephrase your problem again and explain it a bit more clearly please ?

Spatzm said:
I have absolutely not clue what you want here. Could you rephrase your problem again and explain it a bit more clearly please ?
Click to expand...
Click to collapse
when I press "New" button in order to write a new SMS (text message) of my 818pro. The content of the message is just a blank screen, I can do nothing with it except closing it. This also affects on MMS and Email.
Is there anything corrupted?

scott4 said:
Is there anything corrupted?
Click to expand...
Click to collapse
This reminds me of something yes. Could you please do these things and reply with answers to my questions ?
a) How much space do you have remaining on your device (how much free ram) ?
b) Go to Start -> Settings -> Installed Software or hows it called (the place where you see what software is installed) and tell me if the list is still there. Do you see your installed programms in the list or is it empty ?
http://www.choiceway.com/content/gsi/ppc_rem9.gif
c) Can you uninstall or install new software ? Please test with some small CAB file on your device.

is Arabizer installed on ur deivce?!when im using unofficial pdamobiz roms on my prophet,after installing arabizer,the new message window becomes exactly as u said!after disbaling the arabizer it worked again.i hope this helps.

Spatzm said:
This reminds me of something yes. Could you please do these things and reply with answers to my questions ?
a) How much space do you have remaining on your device (how much free ram) ?
b) Go to Start -> Settings -> Installed Software or hows it called (the place where you see what software is installed) and tell me if the list is still there. Do you see your installed programms in the list or is it empty ?
http://www.choiceway.com/content/gsi/ppc_rem9.gif
c) Can you uninstall or install new software ? Please test with some small CAB file on your device.
Click to expand...
Click to collapse
Hello Spatzm,
Thanks for your reply.
a) 23.85MB RAM left
b) ce-star suite v2.8 r2a
c) yes, i can uninstall and install new software.
--> this problem exists right after I sync the data and then press soft reset button. Is this the point? because whenever I press reset button, the SMS I wrote disappear even my pda has been just done a hardreset.

niloofari said:
is Arabizer installed on ur deivce?!when im using unofficial pdamobiz roms on my prophet,after installing arabizer,the new message window becomes exactly as u said!after disbaling the arabizer it worked again.i hope this helps.
Click to expand...
Click to collapse
I dun think "Arabizer" is installed. Is it a program? or something about "Arab"?
Anyway, I can't find it from "Remove program". Tks.

scott4 said:
I dun think "Arabizer" is installed. Is it a program? or something about "Arab"?
Anyway, I can't find it from "Remove program". Tks.
Click to expand...
Click to collapse
I hardreset my 818pro again, but never press the soft reset button, so far ---- OK!!! Why the reset button cause such problem on serveral version of ROM?
AKU2.3.1, AKU3.2, AKU3.3

Arabizer is a program which enables your device to show arabic fonts.when i install it on official roms,there is no problem but when i install it on pdamobiz roms then i have a blank new sms window.as i said,after disbaling the arabizer it works again.hope it helps.

niloofari said:
Arabizer is a program which enables your device to show arabic fonts.when i install it on official roms,there is no problem but when i install it on pdamobiz roms then i have a blank new sms window.as i said,after disbaling the arabizer it works again.hope it helps.
Click to expand...
Click to collapse
There is no such program installed on my 818pro.
I am using AKU3.3 clean rom.

scott4 said:
There is no such program installed on my 818pro.
I am using AKU3.3 clean rom.
Click to expand...
Click to collapse
Probably a ROM issue then. If you recall my reply above with the few questions. I initially had in mind that you might run into the security stuff (certification messup) issue but this is not the case.

scott4 said:
I hardreset my 818pro again, but never press the soft reset button, so far ---- OK!!! Why the reset button cause such problem on serveral version of ROM?
AKU2.3.1, AKU3.2, AKU3.3
Click to expand...
Click to collapse
You have the answer right there. The registry is only written back periodically. After doing any changes you should not quickly follow up with a soft reset otherwise any new information will be lost. At the very least switch off and on again before doing a soft reset. This is not a ROM fault it is simply that writes to the registry are not carried out immediately.
If you want full details see here:
http://www.pocketpcmag.com/blogs/index.php?blog=3&p=898&more=1&c=1&tb=1&pb=1
Mike

mikechannon said:
You have the answer right there. The registry is only written back periodically. After doing any changes you should not quickly follow up with a soft reset otherwise any new information will be lost. At the very least switch off and on again before doing a soft reset. This is not a ROM fault it is simply that writes to the registry are not carried out immediately.
If you want full details see here:
http://www.pocketpcmag.com/blogs/index.php?blog=3&p=898&more=1&c=1&tb=1&pb=1
Mike
Click to expand...
Click to collapse
Hello Mike,
Thanks alot for your explaination. The data cannot be written immediately, so that should not press soft reset button right after a SMS (text msg) is written. This question is answered well.
However. My main problem is why the SMS writing page became blank and never recover until a hardreset? I had this problem after sync PIM and then pressed soft reset button.

scott4, nice to meet u Do u come from HK?
I have the same problem before...
At that time , I used AKU2.? (forget XD) and ce-star too!!!
After hard reset for about a week.....the problem will appear again= =
SO i always reset -> blank -> reset -> blank -> loop....
until I upgrade my 818pro to 2.3, ...
and I don't use ce-star again....since it always hang= =
firstly i use monster chinese...but i found that the font is very ugly.....
so at last , i don't use monster chinese anymore, I only copy mingliu font from my winXP, and edit the registry to let my 818pro can read chinese....
Also , I download the Chinese input method from monster website, but without using monster XDDD
I don't know it's the problem of AKU? or ce-star? or just i'm very lucky.......
I want to upgrade to AKU3.3 too!!! many people say that it's very fast when you compare 3.3 to 2.3.........i wanna try it~>< But now....I'm afraid the SMS blank problem will appear again= =XD

it's the problem of cestar, i used to have the same problem with cestar installed, after uninstall it the problem was gone

Can't Install

Pls pls pls help
can't install anything anymore on my VArio II
can't sync with activesync either, whatsup

If you want help then something a little more detailed might help.... does it produce errors?!? what are the error messages, etc... it would be like telling your docter over the phone that you dont fell good... unless your doctor is psychic then he cant diagnose your problem without more information..

More Info As Req
ok
got wisbar and wisbar deskstop looks sweet
a few other odds and sods
but try to install security Wallet,shareware to try it out
and bam it just wouldn't accept it
when to try and uninstall it and my remove program list was blank
try to install a software from the CD that came with my VArio and it wouldn't install that either!!!!
really scared!!!!

rickyjune said:
ok
got wisbar and wisbar deskstop looks sweet
a few other odds and sods
but try to install security Wallet,shareware to try it out
and bam it just wouldn't accept it
when to try and uninstall it and my remove program list was blank
try to install a software from the CD that came with my VArio and it wouldn't install that either!!!!
really scared!!!!
Click to expand...
Click to collapse
Hi Rickyjune
I don't know anything about security wallet - perhaps it's one of those things that locks up your files and applications, but without knowing about it I cannot guide you through a fix.
I assume you do not have a backup taken before you installed it? or even whether you can access them if you have? (This would be a solution perhaps if you have)
I'm not sure whether your applications are all working or disappeared or locked or what exactly. Sadly if it's in a real mess, I can only suggest a hard reset that obviously will remove everything back to the way you first got the device Would obviosly mean re-installing all your customisations and programmes you've added. It's either that or wait to see if anyone with security wallet helps out. Does security wallet have a help line or e-mail support etc.
Mike

more info
hiya
its called Flexiwallet for secure info and it didn't install
my programs are still on my storage card and windows and everything is working
except can't install and can't sync with activesync
oh and no list of programs in Remove Program list

rickyjune said:
hiya
its called Flexiwallet for secure info and it didn't install
my programs are still on my storage card and windows and everything is working
except can't install and can't sync with activesync
oh and no list of programs in Remove Program list
Click to expand...
Click to collapse
Ok I'll do some checking but I may not get far. See if you can get in touch with them.
Mike

Hi
I'm not sure this is the right one Flexwallet without an "i":
if it's the right one I see you can contact them or use the webis forum:
http://www.pocketinformant.com/Forums/index.php?showtopic=10016
http://www.webis.net/support.php
http://www.webis.net/whatsnew.php?type=FW2006&version=509&Product_Version=FlexWallet%202006%20Rev%203
Mike

Its The Right One But
It didn't install on my mobile
its nowhere in the windows or storage card
the fact is i can't install anything

rickyjune said:
It didn't install on my mobile
its nowhere in the windows or storage card
the fact is i can't install anything
Click to expand...
Click to collapse
Still think it might be worth asking them a question, because I read a post on their forum - under beta testers I think, saying they got an error on install but that it had in fact installed!
You're only other choice is a hard reset unless someone else has an alternative
Mike

mikechannon said:
Still think it might be worth asking them a question, because I read a post on their forum - under beta testers I think, saying they got an error on install but that it had in fact installed!
You're only other choice is a hard reset unless someone else has an alternative
Mike
Click to expand...
Click to collapse
I can attest from experience that the only solution (at least that I've found) is a hard reset and rebuild or restore from backup.
My program list frequently disappears, recently twice in one day. I'm still looking for a solution to the problem, which is how I discovered this thread. I can't find a pattern and tips that I have received (my list is under a supposed limit of 50 and all of my Today screen programs are now moved to main memory) haven't panned out.

yep hard reset was the only way
Your rite DonB, i had to hard reset and install everything
wasn't pretty, but I have sprite backup now but I've had no problems and i've installed Flexiwallett
cant understand what went wrong

Urgent Problem, Blue Angel Freezes

I upgraded my Blueangel to windows mobile 6 a couple of days ago, yesterday i was reset it. when it powered on i have the windows mobile 6 screen and nothings happens thereafter, it is not connection to activesync and i m not able to ROM Upgrade.
Please help me ASAP

read the wiki carefully
try a hard reset after and do the no+yes+yes ritual in the hard reset.. it should worked...
regards
adri

baybe it is because third party software you installed, it happened to me with the touchflo which replaced the touch.dll with another one for another device, also with HTC Plus today plugin

I had it after installing VBAR... you have to reset it and press the record and camera button, then clear the registry HIVE and press the mail button... it will be hard resetted but in wm6 you don't lose any data, just some settings and cabs...

Yeah, I got this problem too a few days ago.. annoying...
When I tried to back up my data using Sunnysoft backup manager, BA had to restart, and then it stuck in the WM6 page... ended up clearing the whole thing again using the no yes yes option...BA was able to start up on safe mode though... weird
I only had this problem once though....
Hmmm, interesting few people have this problems with different circumstances, however leading to the same problem...
is it really WM6 issue or is it 3rd party apps issue?

joseph.sapri said:
is it really WM6 issue or is it 3rd party apps issue?
Click to expand...
Click to collapse
good question!
it just happened to me as well.... i had an almost fresh install of WM2006 (just downgraded, merged Extrom and upgraded again).
I installed some few cabs and eventhough it worked fine for a day, it then started to freeze while booting again and again....
i never had the problem before merging the rom though...

it happened to me also, after doing a soft reset using pbar. it ends up in the green screen with the microsoft logo without going any further. i've tried several soft resets after but it always ends up in that mode.
had to perform a hard reset and install my favorite apps again.

well maybe there are some incompatiblityes with those programs you mentioned, i have not use them my BA has the default apps (the posted cabs) Sprite Backup 6, Htc Home 1.5, Adobe Flash Lite and i have no problems at all

xplode said:
well maybe there are some incompatiblityes with those programs you mentioned, i have not use them my BA has the default apps (the posted cabs) Sprite Backup 6, Htc Home 1.5, Adobe Flash Lite and i have no problems at all
Click to expand...
Click to collapse
have you installed all cabs you posted (cabs & cabs2)?
in what order?
whats Sprite Backup?
and which one is the HTC Home 1.5? (i only see HTC Home6?!?)
sorry, but i am really getting more and more confused...
regards,krz

Sprite backup is the best backup softweare IMO, yes all cabs (cabs and cabs2) Home6 is HTC Home 1.5

thank you very much for your answer, xplode!
there are three HTC HOME6 cabs out there:
1) Helmi HomePlug_Comp.cab: found in Helmi_C's WM2006 archive FLASH.zip
2) Helmi_HtcHome6_WM5_comp_sdkcert.cab: found in Helmi_C's WM2006 archive AddOn.rar
3) HOME6: an archive with two folders (WM5 + WM6) and HTCHome.cab
are there any differences?
is one better than the others?
i never found an answer to these questions...
regards,
krz

KRZTF said:
thank you very much for your answer, xplode!
there are three HTC HOME6 cabs out there:
1) Helmi HomePlug_Comp.cab: found in Helmi_C's WM2006 archive FLASH.zip
2) Helmi_HtcHome6_WM5_comp_sdkcert.cab: found in Helmi_C's WM2006 archive AddOn.rar
3) HOME6: an archive with two folders (WM5 + WM6) and HTCHome.cab
are there any differences?
is one better than the others?
i never found an answer to these questions...
regards,
krz
Click to expand...
Click to collapse
Use Home6 if you want to be able to modify the HTC Home tabs from 6 (default) to less than 6..... this is the only one working....
With Helmi_HTCHome6.. it also works, but cannot modify the tabs......
never tried the other one....

OK OK I had this problem and it solved it without losing data. First i tried to reset the device , like 30 times with no success. Even with a hard reset it didnt work. So you just Put ur device in the booloader mode and then soft reset it and voila. i dont know if it's really the correct solution but it worked for me for 3 times when i had that dumb WM6 screen. It's because of Battery status software ( 100% sure )

BA Freezing
xplode said:
baybe it is because third party software you installed, it happened to me with the touchflo which replaced the touch.dll with another one for another device, also with HTC Plus today plugin
Click to expand...
Click to collapse
Can anyone tell us which third parties programs that cause the freezing or which are compatible whit WM6. To used or avoid them.

Hi,
same problem here. I just installed the cabs from helmi (Thanks again!), the HTC Home (Helmi_HtcHome6_WM5_comp_sdkcert.cab), Acrobat reader and powerpoint (out of this cabs in the first message in the central BA6 Thread) and no additional software. I've re-installed it two times, but that doesn't help .
@ Xeon: Maybe a good work-around, I will give him a try,
UPDATE: @ XEON: Doesn't work for me
regards
Andreas

OK im again facing the same problem it seems my solution didnt work. As far as it seems to, i had to soft/hard reset more than 20 times to solve it. i dont get it. when i reset it the problem is still bla bla bla.. but when u leave it stuck for 10 mins and then reset it , it will work. the point is that after all , u dont need to format/clear registry. All u need is to keep trying. WEIRD [email protected]#[email protected]$#$

I keep having the problem after installing a new cab with a soft reset. The only way to get out of the WM6 screen is to go into bootloader and a soft reset. Just like Xeon said. However, I don't think it is the battery issue because if I just do a normal soft reset, it starts up fine. The problem arrives only when a soft reset is required to finish an installation from cab.