Related
Hello,
i want to change my Ameo in a new one because there are a lot of scratches on the front body. The reason is that the keyboard slipping on the surface of the body.
If any one have the same problem please Post it here because i want to show T- Mobile that this is a failure of construction.
Mine is exactly the same, I tried to take a picture, but it wasnt comming out very well, I was quite annoyed because I tried to keep it good. Does anybody know if this happens with the black ones or is it just silver. mine isnt insured and T-Mobile wouldnt entertain me for insurance because it was 3 months old. though I have heard you can insure it online somewhere.
i've got the same kind of scratches at exactly the same positions.
but i don't think t-mobile will do anything about this
i'ts a normal sign of use
I have some scratches as well, fairly similar to yours. I'll have some pics made if I can get a hold of a good enough camera.
I have a scratch at the bottom of the screen surround. The keyboard clear top has a tiny bump on it (from where it was moulded i think) and this has scratched the case! If it had a decent leather case then it wouldnt happen!
Same here, Same scratches, same area..
Guess we need to find a decent case to carry our precious around in...
Something that has some padding between the 2 parts.
Mine doesn't have this problem. Not a single scratch at all. It still look brand new. I don't use the keyboard or the leather case though. I just carry mine "naked" with my DIY belt pouch. I just have the standard free plastic screen protector over the screen area only and not the body.
This is ironic. The keyboard is supposed to protect but does the opposite.
eaglesteve said:
This is ironic. The keyboard is supposed to protect but does the opposite.
Click to expand...
Click to collapse
It definetely does protect (the screen from cracks).
And imho some scratches on the body of the ameo are much better than a cracked screen
You now, we are speaking about a 800€ all in one device? Such a failure must not happen. If you had a 800€ Notebook with the same problem you would complaine about.
This is what my U1000 looks like close to the VGA camera on the front.
There are 2 more areas where I have some damage but I can't capture it properly on camera.
This is why we should take out insurance on our most expensive phones, as i hate scratches on my phones and if you complain about it with your provider/supplier and they are not willing to replace it when its a manufacture defect then i would personally claim on my insurance QUOTE (MY PHONE IS LOST/STOLEN TO GET BACK A REPLACEMENT) Its too expensive a device for it to scratch so easily.
I have the black HTC Advantage and I have the scratches too.
I have the black Athena and barely any scratches on mine. I use the stock case. The only time I got it scratched is when I first got it because I tried to use it without the case. Mistake on my part.
If you search the forum, you can also buy a $25 solution that protects your entire Athena. It's a plastic transparent covering that protects the entire body of the device. I think I may have posted it in the past to the accessories area. Well worth the tiny investment to protect the looks of your device.
Yep, I have the Black HTC Advantage X7500 and I have no scratches on it. I also do carry naked in my pocket especially around the office to meetings. However, I do feel I need something to protect it without gaining the bulk. I am still looking for a belt clip to carry it.
Just found this product.
http://www.shieldzone.com/item_description/HTCX7500.html
Read good review on PocketPCThoughts for a different product.
Has anyone tried it? It states as full body shield which includes guards for keyboard as well.
Looks Intresting.. But we all know that these type of solution are never as easy to install (Esp. as there are 8 pieces for the Athena)
as they are in the Promo vidz. The vidz also mention that the film has Adhesive on it. How would this affect the deve by:
1. Discoloring over time
2. Being able to easily remove the film, if need or if damaged.
3. Being removed from the screen, without pulling the touchscreen's
touch sensor film off.
Has anybody tried this stuff yet? I think I'll wait for more feedback before I buy.
http://mobilitytoday.com/articles/invisible_shield_protection.html
From some of comments, it seems easy to remove from a pda.
I don't know if that comment was from someone who works for ShieldZone though.
Staroip said:
Just found this product.
http://www.shieldzone.com/item_description/HTCX7500.html
Read good review on PocketPCThoughts for a different product.
Has anyone tried it? It states as full body shield which includes guards for keyboard as well.
Click to expand...
Click to collapse
I just ordered one. I'm having it shipped via 3 day UPS. I'll post my thoughts once I try it out. For the cost it's worth a try. They also have a lifetime replacement policy so if they get screwed up you get a free one. We'll see how it goes.
ltxda said:
I just ordered one. I'm having it shipped via 3 day UPS. I'll post my thoughts once I try it out. For the cost it's worth a try. They also have a lifetime replacement policy so if they get screwed up you get a free one. We'll see how it goes.
Click to expand...
Click to collapse
I will wait for your feedback before I try one. It seems to be right thing to have with this device but I am not sure yet.
lpsi2000 said:
I will wait for your feedback before I try one. It seems to be right thing to have with this device but I am not sure yet.
Click to expand...
Click to collapse
I have it on for over 4 months. Search this very forum for an extensive discussion on it. Easy to install with the water spray bottle provided. The screen protector is a bit sticky so I took it off and used a regular one.
Don't ask any more questions. Just search for the original thread here
Here
http://forum.xda-developers.com/showthread.php?t=298808
My review of the screen protector from Nushield.
(Purchased 2 anti glare, 1 clear model screen protector [comes in a package of 3 only]~ 12 USD)
Install:
-Installation is pretty straightforward but requires some experimenting to get the film in.(Doesn't use a sticky film, but rather a slide in)
-Warning, Make sure that there is no dust under the screen! It is a pain to take out. Trust me i know, i accidently wasted a film by bending it to take it out.
-When you first get the product, u might think that the screen protector they sent you wasn't yours since it looked to big to be fitted in. But actually it fits perfectly once u manage to slide all sides in.
Sensitivity loss:
-On a scale of 10(10 meaning no sensitivity, and 0 meaning no screen protector) it receives a 1.
-However, I did find a HUGE improvement in the touchflo scrolling than without the screen protector.(If you own a kaiser, you should know of the smears and awkwardness of sliding ur thumb to scroll.)
Overall feel and look:
-I actually dont notice it, and it is fingerprint proof.
-Using touchflo feature, the thumb easily slides across with no smears, in other words i dont get that suction feeling.
-And dont forget this is a slide in, so you dont get those bubbles you get from using the provided screen protector you got with the kaiser. The screen protectors surface is really smooth, its like sliding a thumb across a sheet of printing paper)
PS: I have not tried the clear film yet, and dont think i have to. The antiglare film seems to be secure and feels as if it can last years...
My rating for the nushield screen protector is a 9/10.(would be 10/10 if it was easier to install, but then it wouldn't work as good )
As for purchase instructions, go to www.nushield.com and choose the HTC TYTN as for screen specs since it is the same as the kaiser. (I was foolish to try to custom make the screen protector for the kaiser only to realize that its the same size as the tytn!!*got email telling me that *) You can mix and match as i did by putting which films you would want under the comments on checkout.
Thanks for that, i was looking for a good screen protector but i didnt want those sticky ones. This is perfect and from your review, it seems to do a great job too!
Thanks, i just ordered one, but as you said, there was no 'kaiser' ones so i just ordered it for the tytn
I'll always be a fan of PocketPCTechs.com's WriteShields. And during October, you can get 20% off if you use this coupon code: PPCTRC1007
Type it into the Special Instructions field.
Just as an FYI to anyone else considering ordering the NuShield: I decided to try some based on this review, and also decided to get two anti-glare and one clear. I got the following response:
While we are always trying to be accommodating to our customers
special requests, this one has gotten out of hand. Someone must have
posted on a discussion board that we will do this. This request is
now occurring several times daily and represents a significant amount
of time and effort to put these special packages together.
Click to expand...
Click to collapse
Guess they don't like doing that very much.
EDIT: and fwiw, they appear to currently be out of anti-glare anyway, so I ended up ordering clear.
Martin Field's OverlayPlus
Best. Screen protector. Ever. Period.
It's non sticky, invisible, and best of all: If you mess up (e.g. bubbles, dust) while putting it on, you can just rinse it off with water, let it dry for a few minutes (or blow dry), and voila: It's clean and sticks again.
I've been using these things on my mobile phones, PDA's, Nintendo DS, etc, for as long as I can remember. Even after 5 years, you can simply take the screen protector off and your screen will look brand new.
Already have a small scratch? Put the screen protector on and it's gone
ekw said:
As for purchase instructions, go to www.nushield.com and choose the HTC TYTN as for screen specs since it is the same as the kaiser. (I was foolish to try to custom make the screen protector for the kaiser only to realize that its the same size as the tytn!!*got email telling me that *) You can mix and match as i did by putting which films you would want under the comments on checkout.
Click to expand...
Click to collapse
I thought the 8525 is the same as the TyTN, and the screen protectors for it won't quite fit the Tilt.
But you can confirm these will fit the Tilt?
GWelker62 said:
I thought the 8525 is the same as the TyTN, and the screen protectors for it won't quite fit the Tilt.
But you can confirm these will fit the Tilt?
Click to expand...
Click to collapse
Unless it's an unusually small screen protector for the TyTn/8525, you are correct that it will be too large for the Tilt. I had to trim about a millimeter off of each dimension of my Boxwave ClearTouch Anti-Glare for it to fit.
I really like the Boxwave protectors. I had one protector last for over two years on my Treo 650, and similar to another protector described, if you want to clean it just use hand soap and water and stick it right back on.
In fact, I found that if the protector is slightly wet, it is much easier to get the bubbles out. It took almost no effort after I trimmed it when I put it onto my Tilt's screen.
So do any of these make the screen easier to see in direct sunlight?
I just ordered 2 BRANDO superclear ones ... have had a lot of phones and have had a lot of screen protectors but i have to say brando is DEFINATELY the best.
Noiz said:
So do any of these make the screen easier to see in direct sunlight?
Click to expand...
Click to collapse
I've never came across any that would. The only thing that helps is the... ummm, shade.
GWelker62 said:
I thought the 8525 is the same as the TyTN, and the screen protectors for it won't quite fit the Tilt.
But you can confirm these will fit the Tilt?
Click to expand...
Click to collapse
I confirmed it in my review. BTW Dont be stupid and trim it, it fits perfectly, trimming it would cause it to be loose once its in which will become an annoyance.
I just received the overlay plus screen protector for the tytn, and it does not fit the kaiser screen. The tytn overlay is larger than the kaiser's screen. I hope martin fields accepts exchanges.
d12ag0n49 said:
I just received the overlay plus screen protector for the tytn, and it does not fit the kaiser screen. The tytn overlay is larger than the kaiser's screen. I hope martin fields accepts exchanges.
Click to expand...
Click to collapse
keep trying to fit it in, if you read the original review he says that it's very hard to get it in there, but once it's in...it's gonna do good.
I was able to fit it in but its not on perfectly because the overlay uses a silicone adhesive, which makes it somewhat difficult to maneuver unlike the nushield screeprotectors which you just slip in.
d12ag0n49 said:
I was able to fit it in but its not on perfectly because the overlay uses a silicone adhesive, which makes it somewhat difficult to maneuver unlike the nushield screeprotectors which you just slip in.
Click to expand...
Click to collapse
wait....i think this is a case of miscommunication, I thought that you couldnt insert the NuShield protectors in, so I said to keep trying because the original poster said that it took him a little bit, but now it seems like you are talking about another kind of protector.
Conclusion: I'm confused
a lot of 99 cents only stores have 10 for 1 screen protectors that are larger than the kaiser. i bought like 5 of these (50 count) and just cut them to the size of the manufacturer's protector. it takes about a minute and avoids the highway robbery of screen protector prices.
ghaith_d said:
wait....i think this is a case of miscommunication, I thought that you couldnt insert the NuShield protectors in, so I said to keep trying because the original poster said that it took him a little bit, but now it seems like you are talking about another kind of protector.
Conclusion: I'm confused
Click to expand...
Click to collapse
Sorry for the confusion. I purchased the Martin Fields Overlay Plus screen protector and not the Nushield one that the OP reviewed.
d12ag0n49 said:
Sorry for the confusion. I purchased the Martin Fields Overlay Plus screen protector and not the Nushield one that the OP reviewed.
Click to expand...
Click to collapse
aaaah, makes sense. I already have my 6gb micro sdhc and my nushield protectors...im just waiting for my kaiser
Nushield now has a drop down menu for Tilt in ATT and TyTn II in HTC sections. I will order them since it seems like a pretty good value.
i ordered a shield from shieldzone.com
i have used them on my blackjack and digital camera, but never a PPC device so I will have to see how well it works..
I am thinking of getting a case to protect my Kaiser...
What do you guys think of this HTC Kaiser Body Guardz:
http://www.thepocketsolution.com/PSI-42272.html
I know it is transparent, but it is not clear if it will protect it from falls, etc...I doubt it...
/MN
weird ...
every other variations of the Kaiser ( TYTN II/8925/TILT/Vario III )is out of stock except for the "TILT" is available for ordering ...
http://www.thepocketsolution.com/PSI-42589.html
must be vendor error or NOT YET AVAILABLE ( should all be same ... except for the single camera model ) ... I would email & ask ... I think this is just website putting it up way before the device came out ... ( roughly within the last 2 weeks, if you covering all the variations coming to be reality. )
curious ... on one of the demo video ... they had the iPhone protected right over that touchscreen ... I got to thinking ...
if their measurement are top notch ... hopefully the one for the Kaiser does the covering for the screen too !!
we can skip the screen protector altogether ( its thickness replacing the screen protector's thickness ) ... LOL
those thing dries to an invisible result !! COOL stuffs ... I'll be ordering one for sure .. plus I'll get a cool case as well. ( because the guardz is mainly for nick & scratches ... not dropping.
The bodyguardz is because my Kaiser deserved the spoiling ... hahahah
this is weird indeed... I just checked a moment - it doesn't update the stock status until you get into the cart...I will shoot them an email?
what non-magnetic flip case would you recommend?
rgds, MN
I like that the back of the Kaiser is "slightly rubberized" it keeps it from slipping around like the old Hermes did. Does this cover feel the same way? I probably wouldn't go for it either way, but, if it is slippery, it takes away a nice feature IMO.
liking the look of the bodyguard thingey! is it tough/ - ie drop proof?
I put something like this on my wife's iPhone and it works great. Well worth the investment and it really cuts down on the fingerprint smudges (the iPhone is flat out impossible to keep smudge free). I used this skin and bought one of the thin ruberized cases, and my 14 month old daughter has knocked it off tables on several occassions with not a scatch or even a blip of the screen. I have to admit for all it's lack of features, that thing is TOUGH and makes a great device for my wife. I also like the peace of mind that the thing can get thrown around her purse to her hearts content right beside that massive key ring and all I have to do is peel that thing off and it will look like new.
I wonder how well it would suit the Kaiser though since it has more moving parts. On the two occasions my daughter has knocked my 8125 off the coffee table, I have cringed. No damage, but on one occasion the battery door got knocked off, thus forcing a soft reset. Even with one of these covers, I am thinking the sliding keyboard and pop off battery cover will make it more prone to injury, even when it is in a decent case.
Bottom line, I'll be making sure my Kaiser is out of reach!!
i've been watching that site for 3 weeks now waiting for them to get the skins in stock. well, my order went through without a problem
give us a feedback when u get it dude
traveling on business all week, but will follow up when i return next weekend.
jgermuga said:
I put something like this on my wife's iPhone and it works great. Well worth the investment and it really cuts down on the fingerprint smudges (the iPhone is flat out impossible to keep smudge free). I used this skin and bought one of the thin ruberized cases, and my 14 month old daughter has knocked it off tables on several occassions with not a scatch or even a blip of the screen. I have to admit for all it's lack of features, that thing is TOUGH and makes a great device for my wife. I also like the peace of mind that the thing can get thrown around her purse to her hearts content right beside that massive key ring and all I have to do is peel that thing off and it will look like new.
I wonder how well it would suit the Kaiser though since it has more moving parts. On the two occasions my daughter has knocked my 8125 off the coffee table, I have cringed. No damage, but on one occasion the battery door got knocked off, thus forcing a soft reset. Even with one of these covers, I am thinking the sliding keyboard and pop off battery cover will make it more prone to injury, even when it is in a decent case.
Bottom line, I'll be making sure my Kaiser is out of reach!!
Click to expand...
Click to collapse
As i've mentioned earlier about the iPhone howto video ...
Could you tell me how good the touch sensitive screen reponses when it have the "bodyguardz" covered ??
note: ... only certain kit(s) goes this way of "covering the whole screen" ... if it works well ... I hope the TyTN II kit do the same ...
thickness is similar to a screen protection I guess ... there's one video for the MACBOOK and it does the "covering of the mouse's touchpad" as well ... so I guess it works really well then.
YOUTUBE howto vids ... all sorts
http://www.youtube.com/results?search_query=bodyguardz&search=Search
~~~
ok guys (and any girls) i just applied the BodyGuardz to my Kaiser and took a few pics before hitting the road... I've included 10 pics in the attached zip file. they're not the best pics, but hopefully they give you some perspective on fit, look, etc. keep in mind that it takes 24 hours for the bubbles to disappear. the pics were taken about 3 hours after application so you'll see some bubbles here and there. by the way, you get 2 sets of skins and 3 screen protectors with the kit. each set includes a skin for the left and right sides, one for the top, one for the back and one for the front. the left side skin also covers the bottom of the phone. so far I'm pleased. i like the somewhat tacky-feel and now i know my phone will be protected from scratches when in my pocket. overall this is a pretty good value.
InvisibleSHIELD
Would anyone else be likely to purchase a screen and phone body protective case from ShieldZone if they have one available?
I have used these on many of my gadgets and they are the best around (IMHO)
I just emailed them to see if one is in the works and will post back with their reply when I recieve it.
Park City said:
Would anyone else be likely to purchase a screen and phone body protective case from ShieldZone if they have one available?
I have used these on many of my gadgets and they are the best around (IMHO)
I just emailed them to see if one is in the works and will post back with their reply when I recieve it.
Click to expand...
Click to collapse
I too think they make the best protection for our devices. I've used them on my previous Wizard and Hermes and loved them. The problem I see with putting them on the Kaiser/Tilt is that there's really not much real estate to cover. There's the screen (of course), but that's about it. I personally wouldn't want to cover the back because I like the grip I can get from it. The sides are "ridged", and can't be covered. And the rest of the face is just too small to cover.
But they're really good about making custom shields if you bring in your device to them and it's only like $10 more than their usual charge. But once they make a template, no more custom build fees.
I bought the invisibleshield for my 8125 many years ago. It was a big waste of money. I hated it.
i too had reservations about using a "skin" to protect my Kaiser. i just recently applied the BodyGuardz to my device and as of know, i think i'll continue to use them. this is a link to some pictures (some good, some not so good) in case anyone's interested to see how it turn out.
i had this for my wizard. I love how friendly customer service was. If for some reason, you screw up your cover, which is pretty hard to do, then you can ask them to ship you another one paying for shipping as long as you register.
Only complaint is that it's a little too thick. Didn't feel good with the stylus. But at least I was confident that my screen wasn't going to get damaged.
bloody hell i can hardly see it!
it looks so thin!
are you sure it will protect it?
little_rock said:
bloody hell i can hardly see it!
it looks so thin!
are you sure it will protect it?
Click to expand...
Click to collapse
yes, it's thin and it covers a significant portion of the device. durability is good at the moment...time will tell how well it protects the device.
Does anyone now if there will be any traces left when you remove the "bodyguardz"?
Corinna said:
Does anyone now if there will be any traces left when you remove the "bodyguardz"?
Click to expand...
Click to collapse
I am pretty sure it will unless it covers 100% of the back. I kept my protection film on the battery cover for 2 days of use, when i took it off, there was a very noticeable trace from where it was.
I can't get screen protectors to stay on. I apply them per the instructions and about a week later they come off...
I have a Martin Fields screen protector and haven't had one issue. I keep my phone in my pocket most of the time too.
invisible shield
hands down the best protector on the market.
lifetime warranty, never needs replacing, etc.
I have one on my Tytn, my Himalaya, my ipaq, my Zen mp3 player, 'nuff said.
www.shieldzone.com
I swear by WriteShields myself (www.pocketpctechs.com). I've had them for my past 3 devices and they've outlasted the devices. They're very easy to put on cleanly with no air bubbles. They even have an anti-glare version that makes it much easier to see the scren outdors. I've never noticed any decrease in screen responsiveness; in fact, I prefer the firmer feel with the WriteShields.
drummrsanonymous said:
I swear by WriteShields myself (www.pocketpctechs.com). I've had them for my past 3 devices and they've outlasted the devices. They're very easy to put on cleanly with no air bubbles. They even have an anti-glare version that makes it much easier to see the scren outdors. I've never noticed any decrease in screen responsiveness; in fact, I prefer the firmer feel with the WriteShields.
Click to expand...
Click to collapse
Agree, i like these products.
I use the Crystal version, which makes the screen look naked, exactely like a brand new screen, flashy, glossy screen. Now the second version is Drumm's above, i didnt test it yet.
These protections are thick, thus kinda rigid. As a consequence no air bubbles remain when applied.
I just bought a Martin Fields, and it works really well. I was using NuSheild before that but I could never get the bubbles out, and as soon as I would get them out, and press my screen again, they would come back, very annoying.
Martin Fields however does not have that problem, and installation was a lot simpler, plus, it comes with a camera (lens) protector as well.
are the screen protectors mentioned in this thread pretty easy to apply? i usually get a clean application but there's always one or two bubbles that won't go away. another thing is getting it to lay down straight. do you guys have any techniques for applying?
I tried yet another screen protector and it came off again. I guess what I am looking for is a case that also has a cover for the screen, but not an aluminum case (too bulky).
My answer is...
A chap on ebay from Hong Kong. 3 protectors for a very small price.
Search for... HTC TyTN II Kaiser MDA Vario III screen protector x 3
Seller name - feidolphin
I have used this bloke 3 times for the same product for various handsets and he has always sent high quality items and pretty quick on the postage side to (6 days max).
Steve
I can recommend one from Brando. Very good quality. Well regarded in some countries, however not that known in the UK.
Martin Fields Screen Overlay.
Been suing these on all my devices: my original SPV, P900, SPV M2000, XDA Exec, M3100, Ameo and now my Vario III, and they are the BEST. Properly installed, bubbles smooted out, you can't tell they're there, and they are nearly impossible to damage, unless you take a knife to them. Also, if your device has multiple screens and/or cameras, they provide protectors for those too.
The protector T-Mobile provided with the Vario III is PANTS! I damaged it installing it, trying to rub an airbubble out...
skoop99 said:
Been suing these on all my devices: my original SPV, P900, SPV M2000, XDA Exec, M3100, Ameo and now my Vario III, and they are the BEST. Properly installed, bubbles smooted out, you can't tell they're there, and they are nearly impossible to damage, unless you take a knife to them. Also, if your device has multiple screens and/or cameras, they provide protectors for those too.
The protector T-Mobile provided with the Vario III is PANTS! I damaged it installing it, trying to rub an airbubble out...
Click to expand...
Click to collapse
Suing? Eh... USING...
WriteShield
Hi,
Someone can say me if WriteShield Screen Protector fit exactly the screen size of the Kaiser without leaving some screen surface unprotected ? Or which one fit exactly the screen's size ?
Thanks in advance
Moo
i just used the official iphone one from apple and cut it down to fit. and it works great no bubble or anything like that...and the left over is just big enough to cut a small disk out to put on my watch face. and then i can use the piece for the back when i need a replacement for the one on there.
I bought an el cheapo one from ebay and not only does it feel horrible to the touch the edges are starting to fray. I had bought one for my ppc 6700 like 2 years ago that looked like nothing was on the screen and had great tactile feedback, which ones do you recommend for our kaisers?
I have purchased many screen protectors from cheap sites as well as expensive ones. My favorites are the ones from InvisibleShield. They are a bit more expensive, but they are very precisely cut and last a long time. If they ever get scratched you can get them replaced for free as well. I have not tried BodyGuardz, however, which are the same price, but you get two instead of one in the package.
I like the Boxwave Cleartouch a lot.
If you are anything like me, buy the three pack because you'll probably mess up at least one putting it on. While they say you can wash and reuse them, I don't think it's worth it.
That and a can of compressed air to blow the dust off before you put it on and you should be good.
Side note about using a compressed air can - don't use the straw. I had it blow off directly at my screen and thought my screen was permanently damaged. Thankfully, I had been using the screen protector that came with the tilt which has a bit of adhesive on it, so I only "scratched" the adhesive.
mZimm said:
I have purchased many screen protectors from cheap sites as well as expensive ones. My favorites are the ones from InvisibleShield. They are a bit more expensive, but they are very precisely cut and last a long time. If they ever get scratched you can get them replaced for free as well. I have not tried BodyGuardz, however, which are the same price, but you get two instead of one in the package.
Click to expand...
Click to collapse
I have one of the InvisibleShield HD ones on mine, it is really crisp/clear, doesn't really show fingerprints at all, and its been on my phone for a few months now, and still looks like new.
The only thing I'm not sure of, is that it seems like it may reduce some of the sensitivity of the touchscreen because it is thicker, YMMV though.
I also have the bodyguardz themselves on too, and I'm not nearly as impressed, I'm probably going to pick up one of the Seidio slim rubberdized cases, just trying to spread out the accessory cost right now
I like...
... the one it came with. Still looks new.
im in the UK, i buy 3 screen protectors for asda for £2.99 (guessing thats about $5), so id guess walmart would be a good place to look for cheap ones.
ive had to cut it down to size for my hermes but the screenie i have on it has last over a year
ive also put these screenies on family and friends phones and cameras, no one come back to yet complaining.
My first windows mobile device was in 2002 and i tried every cover for it. From cheap ones to a couple of the more expensive ones. One of which was the PocketPCTECHS writeshield protector.
I bought the double pack, which came with the Antiglare one, and the Crystal Clear one. I applied the Crystal Clear one and it was amazing... i never used the anti-glare till i got my next device and threw it on that one.
They are very durable, can barely tell they're there and are just amazing...
But for my kaiser, i just ordered the invisibleshield for the entire device so i thought, why not let me try their screen protector out and see how it holds up.
so till i try out the invisibleshield, i'm still recommending pocketpctechs.
Martin Fields. As long as you install it properly (cleaning part is very important), you don't even know it is there.
This topic has been covered numerous times before:
Martin Fields Screen Protector
http://forum.xda-developers.com/showthread.php?t=358845
What is the best thing to protect my screen?
http://forum.xda-developers.com/showthread.php?t=353006
Invisibleshield - Does it affect touchscreenability?
http://forum.xda-developers.com/showthread.php?t=353394
liquid screen protector
http://forum.xda-developers.com/showthread.php?t=352818
ClearTouch Crystal Screen Protectors - How Do I Remove?
http://forum.xda-developers.com/showthread.php?t=349407
Using another screen protector
http://forum.xda-developers.com/showthread.php?t=344452
Brando screenprotectors available
http://forum.xda-developers.com/showthread.php?t=329280
Expert Shield screen protectors are just as good as the Martin Fields and a fraction of the price. You can get it for $7.25 shipped.
I have purchased from this ebay seller MANY times. Great communication and fast shipping.
http://cgi.ebay.com/ES-Screen-Prote...yZ116221QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
www.expertshield.com
Registry tweak for screen sensitivity really helps
Think if you using the highe durability thicker screen protectors the increased pressure sensitivity will help alot - am just using the one that came with the TILt on it and it greatly improves tactile feedback and response is almost instantaneous with very minimal pressure
Q: How do I increase the sensitivity of the touch screen?
A: If you want to increase the sensitivity of the touch screen, I recommend setting the registry key (HKLM\Drivers\?TouchPanel\Pressure Threshold) to 5000. It may seem a little high, but the response time is practically instant, and very little pressure required (still enough to avoid accidental presses).
thoughts concerning Martin Fields & Expert Shield protectors
Mine is another vote for the Expert Shield and/or Martin Fields.
Just got it at around seven bucks shipped from eBay. I (prior to this) ordered a Martin Fields and had a difficult time applying it to my Tilt without creating air bubbles. I'm clumsy. and I sneezed half-way through. It's definitely high quality and far better then what shipped with my Tilt. Anyway, I took it into the bathroom and left it to dry so I could attempt to re-apply it later. There, it promptly slipped into the space between the sink cabinet and the tub. Goodbye Martin.
* sigh *
The ES protector seems to be just as good - they're both excellently cut and you can't go wrong with either of them. I don't feel it impairs the screen at all - stylus and finger use ( I use my finger all the time ) are pretty much as it was without the protector. Maybe a tiny touch less sensitive, if you're picky....one can increase sensitivity to compensate. I myself did not find this necessary.
I hope this can be of use to anyone considering the choices. I think a screen protector is a must if you care about your device. I had little regard for my HTC 8125, which lived in my pocket up until last week. The screen held up pretty well, considering it's been to PPC Basra and back. It shared the pocket with my keys, various automotive tools, nuts, bolts, and large quantities of quarters.
m.photo said:
Mine is another vote for the Expert Shield and/or Martin Fields.
Just got it at around seven bucks shipped from eBay. I (prior to this) ordered a Martin Fields and had a difficult time applying it to my Tilt without creating air bubbles. I'm clumsy. and I sneezed half-way through. It's definitely high quality and far better then what shipped with my Tilt. Anyway, I took it into the bathroom and left it to dry so I could attempt to re-apply it later. There, it promptly slipped into the space between the sink cabinet and the tub. Goodbye Martin.
* sigh *
The ES protector seems to be just as good - they're both excellently cut and you can't go wrong with either of them. I don't feel it impairs the screen at all - stylus and finger use ( I use my finger all the time ) are pretty much as it was without the protector. Maybe a tiny touch less sensitive, if you're picky....one can increase sensitivity to compensate. I myself did not find this necessary.
I hope this can be of use to anyone considering the choices. I think a screen protector is a must if you care about your device. I had little regard for my HTC 8125, which lived in my pocket up until last week. The screen held up pretty well, considering it's been to PPC Basra and back. It shared the pocket with my keys, various automotive tools, nuts, bolts, and large quantities of quarters.
Click to expand...
Click to collapse
Sorry to hear about your situation. I know I've screwed up a few of mine in the past. I have Expert Shield protectors on every device I've owned. Nokia 6820, 6822, E-70, PSP, my girl's Sony-Ericsson w850i, LG Shine, my friend's LG Chocolate and I've never had a problem with them.
I'm glad you enjoy yours as much as I do.
has anyone ever tried these?
http://www.thepocketsolution.com/PSI-42588.html?gclid=CPeS1r25xZMCFSQtagodiEn8Cw
I got the Boxwave Cleartouch Crystal and the Anti-Glare, used both for two weeks and I settles on the Crystal..
I just don't like how the Anti-Glare makes the screen look, the Crystal on the other hand is like having nothing on the screen at all it's perfectly clear and well the Anti-Glare really wasn't Anti-Glare..
both are nice and thick and I didn't have to adjust the sensitivity on my Tilt either to use them
WriteShield
Hi,
Someone can say me if WriteShield Screen Protector fit exactly the screen size of the Kaiser without leaving some screen surface unprotected ? Or which one fit exactly the screen's size ?
Thanks in advance
Moo