Related
i finally got it working on my qtek & enjoying the mms service from any phone to any phone :lol: anybody intrested in the way?
Hi,
i am interested, please share your exprince.
thanks
Kami
Great !! Plz let us know.....
Are you using the 1010 (QTEK) or the 2020 (Imate) ?
Also what is your ver of ROM & Radio ?
L8R
-d
PLEASE let us know this precious information as to how to get MMS working in the Qtek 1010
here is the way
first to answer your questions am using Qtek 1010 & MW2003 & Radio 3.25 (don't know if it makes a differance) please let me know
what you need to do, i have 3 file that is zipped into 1 file attached below,
1. Unfortunatly you have to delete all you connection setting, every thing, the ones under work, the ones under home (all), but don't worry because these files contains all of them gprs, mms, internet
2. install the files in the same sequence they are in from 1 to 3
3. now soft reset your phone. (might take up to 5 minutes to go into windows the first time)
4. put the setting exactly like the attached picture 2
5. Click on the servers TAB & click on etisalat & fill as exactly as shown in pic 3
6. compose a new MMS & send it to someone who does have MMS & there you go, ask him to send it back to you, & its working & doesn't need any activation or anything but you might notice that the signal line is still working after recieving the MMS picture, don't worry its not charging you & you can still recieve calls but if it bugs you keep holding the (close)(red) buuton on the phone to stop it, please send me your results am intrested in the outcome
Regards
Rabia
Rabia said:
1. Unfortunatly you have to delete all you connection setting, every thing, the ones under work, the ones under home (all), but don't worry because these files contains all of them gprs, mms, internet
Click to expand...
Click to collapse
Hi mate, I 'm so interested to try this s/w, but have few questions:
1. Does it work for other countries providing you know the right setup ?
2. I 'm using EZWAP 2.5 for MMS, how do you compare the 2 products ?
3. Regarding the above quote, do you mean it's predefined to work for only Etesilat network ?
Thx in advance
Biso007 said:
Hi mate, I 'm so interested to try this s/w, but have few questions:
1. Does it work for other countries providing you know the right setup ?
2. I 'm using EZWAP 2.5 for MMS, how do you compare the 2 products ?
3. Regarding the above quote, do you mean it's predefined to work for only Etesilat network ?
Thx in advance
Click to expand...
Click to collapse
1. first yes it would work for any other country if you have the right setup, i also happen to have the setting for egypt both operators anyways
2. i used this stupid program but its over compplicated since you have to fill millions of setting everywhere & all what we need is to send & recieve mms easly, no doubt if you are using ezwap & its working fine just keep it its good for advanced setting but to keep it nice & short this software is much easier than ezwap
3. for the 3rd question files #2 containes Etisalat setting so for egypt i have to give you a differant File#2 which is attached for both operators (ofcourse its the exact setting they use no invention was made from my side) & the rest would be the same, ofcourse except whats in the 2nd picture as the http page & the IP also happens to be Etisalat
Regards
Rabia
Thx a million ... I 'll give it a try so soon and I 'll give my feed back so other people here may comment as well.
very good, is anybody intreseted from other countries i have kuwait, bahrain, jordan & KSA but all needs to be tested so any volenters?
Hi again,
I gave it a try ... it works like a charm!!! ... much better than EZWAP!
I just tested it with 2 MMS and its performance is pretty good. One comment on the settings .cab for Egypt, the mobile dialing pattern is some how corrupted ... it's full of quotes and 9s ... I just had to over write it myself ... other than this it's very good.
The Album application seems took the handling of all multimedia files ... I don't mind as it looks very good as well ... it's the first s/w on my device to play midi files that good!!!.
I will continue trying and keep you updated.
Thx a lot mate :lol: :lol:
perfect Biso007 i like what am hearing, as i thought some glitches in Egypt but hay i never been there :lol: so its good it ran with little problems, i would like other people from other countries to check it
PS anybody whos trying it, you would find a camera SW in your programes don't mind it but DON'T remover it since it makes the album works which is required for the SW to be working, if it bugs you just remove the icon manualy like i did
R
R
Hi again,
Yes, I was about to remove the camera.exe from \windows but thought it might affect the application ... it takes 0.5 MB :?
One more comment, but I don't know if it's only my device ... if you have your ActiveSync connected to a remote Exchange server (Outlook database) through GPRS ... it will no longer connect ... the MMS s/w messed up the whole connectivity settings ... it takes the one to know exactly how to set everything back manually ... it's a pain but finally worked tho 8)
This s/w is prefectly simple and powerful in the same time ... will keep trying more features.
keep it up man, i wish we have more people of your kind, we would had all our problems solved :roll:
another comment, but not sure it's the s/w or the MMS server ... i sent a simple MMS message to my wife's phone (Nokia 7260) ... instead of receiving MMS notification , normal SMS was received with instructions for how to access the message from the web as if it was sent to e-mail or non-MMS phone.
i think it's the s/w coz when i use EZWAP a normal MMS notification is received. However, i'll try it with different handsets. my previous tests were to my own phone so i know it's working fine for PPCs.
note: i renamed the camera.exe file and seems have no impact on album s/w ... maybe coz my xda doesn't have a camera ?
the today plug-in and the sending/receiving icon on the windows bar are very nice features.
any other notices ?
Re: here is the way
[quote="
2. install the files in the same sequence they are in from 1 to 3
[/quote]
Sorry but how do u install a cab file? Or should I unzipp them into a folder on my phone?
//Lasse
never mind that post. Figured it out
//Lasse
Sweden Telisonera
Hi
Anybody got this to work with teliasonera.
I got it to work that it connects to the GPRS server, but the mms messege never gets sent. Is there a error log for the mms composer anywhere?
I don't get any errors at all, it just wont send it. I can't recieve either
//Lasse
you need the setting of your country to be replaced with these setting, they are country spesific, try to obtain the setting & i will help you getting it installed
as for mr Biso it was nice of you, very systimatic test, thanks alot but my contributions seems that will end to here, i got a 1% death message for a radio upgrade & couldn't get over it, i tried everything in this forum but seems not to be lucky so far
Rabia said:
you need the setting of your country to be replaced with these setting, they are country spesific, try to obtain the setting & i will help you getting it installed
as for mr Biso it was nice of you, very systimatic test, thanks alot but my contributions seems that will end to here, i got a 1% death message for a radio upgrade & couldn't get over it, i tried everything in this forum but seems not to be lucky so far
Click to expand...
Click to collapse
I got the settings.
the settings for Teliasonera are:
GPRS server: mms.telia.se id:mms passw:telia
gateway: 193.209.134.132
Server Address: http://mmss
Still. The mms does not go out of the outbox....
//Lasse
Rabia said:
i got a 1% death message for a radio upgrade & couldn't get over it, i tried everything in this forum but seems not to be lucky so far
Click to expand...
Click to collapse
I know it's a nightmare ... I 'm sorry to hear that . Anyway, check this thread and hope it will help http://forum.xda-developers.com/viewtopic.php?t=4123&highlight=1+rsu
Good luck
Hi All,
Today I went to my local 3 store to test my O2 Xda Exec/Jasjar (universal) with a 3 simcard. This is what I discovered.
The 3services settings allows you only to access planet3. 3netaccess Settings is to be able to surf the net on your phone. You will have to manually switch beween the settings depending on what you want to do.
Question to you all out there...... has anybody worked out how to get video streaming with 3 ? When it came to accessing Mobile TV, I could not get it to work, I got a message "your device is not supported for this service". This was the case for all video streaming on planet3. I was only able to view text stuff.
My initial thought about it is that there are file format issues, remebering that 3 offer no phones which are windows based? I am thinking to try it again using pocketTV software. I use this at the moment instead of crappy windows media player.
So has anybody resolved the streaming issue?
Must be @ least 1 aussie using 3 network here?
Must be @ least 1 aussie using 3 network here?
guinevere,
I am using Three Australia as well and like yourself would like to be able to view Three content. I have posted on several forums and the only thing constructive I have found out is apparently a certificate is required on the device to access Three video content. I have also been told that Three are planning on releasing a WM based device in the near future which may help our cause. Any information you could find would be great news to a lot of people who use Three in Australia.
Hi Shane, great to hear from you.
Thats interesting I have not heard that yet, but it hmakes sense. I Dont have a 3 sim yet, still in research stage, thinking of getting one anyway till I fnd a better option.
Perhaps we could use this thread to collect info for Universal use with australian networks as there is not much happening at the aussie3g forum for us.
Do you have any info about using universal on optus, vodaphone or telstra, I have not tested there sims yet.
Also shane, have you got MMS working?
Guinevere,
I don't use MMS so I can't comment on whether it works or not, but a lot of people seem to be posting that it has issues. An interesting sideline I was told by my Corporate Rep from Three is that a senior Three official in Australia has taken a shine to the Universal and is using it rather than a Three handset - so maybe some development might soon follow!
Like yourself, Three support don't want to know anything as soon as they hear that we are not using a Three handset.
I think it's a great idea to use this forum as a meeting place for Aussie Three users with WM devices.
None of my colleagues or customers at present have gone 3G but I have a customer who is looking to join the Telstra network. The customer has been told that Video content will work OK on the Jasjar from Telstra. (As yet the device has not been approved officially for use on the Telstra network -unbelievable I know!).
I will post updates once I find out anything new.
Shane
:idea:
Hi shane any news?
I have since got myself a 3 sim.....so far i am enjoyin it, just using it for basic things like reading tex news and other text stuff offered on planet3, also its good now with there My3 section where you can view your usage. I know also use it to check my pop3 email for when I am not in the office.
the only things still not functioning is the MMS and video streaming....which I have made up by converting all my favorite film clips and movies into divx's to play on my Exec
Thus far MMS and Video Streaming does not work on XDA Exec. Which is kind of silly since our phones are like 6 billion times better than what is in those 3 shops. :wink:
3 network three australia
We have tranfered this discussion to this thread:
http://forum.xda-developers.com/viewtopic.php?t=51646
Please join us
Telstra MMS Settings
I know this is an old thread, but some people may still be after the Telstra MMS Configuration for the Universal.
Under Connections, you need to rename "My Work" Network as Telstra MMS, and set up a new modem connection:
Enter Name of Connection as "Telstra.MMS" and select Cellular Line (GPRS,3G) for the modem. The access point is "telstra.mms.mnc001.mcc505.gprs". Leave username etc blank.
Next, open your inbox (messaging) and click on Menu/Tools/Options. Click on MMS to retrieve the MMS Configuration. On the preferences tab check "Retrieve Messages Immediately", "OK to download when roaming", and "Save sent messages" as you prefer with all other boxes blank.
Click the "Servers" tab. If you don't have Telstra there already, click on New. The Server Name should be Telstra, the Gateway is 10.1.1.155, and the port number 9201. Enter the server address as "http://mmsc.telstra.com:8002", and select "Telstra MMS" under Connect Via. Click OK until you are back to the Today Screen.
That works for my Jasjar on Telstra. Hope this helps somebody.
Hello all!
I have been searching for hours looking for answers and I've found a lot of cool information, and supposedly some cabs that will supposedly fix what I want, but I'd prefer to do it manually before loading some cab files from the net. And I want to do it manually because at one point I had this working.
Problem: MMS is not working "correctly." I have the TX and RX small picture problem to be specific. I have found numerous posts linking to cab files here, there and everywhere, and to be honest there are too many download links for me to feel comfortable picking one that claims to work.
I have an HTC Universal branded as an XDA Exec. I recently upgraded the ROM to the latest that O2 had (if you need a copy I can provide), and that fixed some other problems I had going on. The last issue I have unresolved is the small picture problem. I am currently running Windows Mobile 5.
I have called HTC and some spaz guy answered the phone. It sounded like he was getting it on with someone or running a marathon, and he pretty much told me to talk to AT&T, with whom I had just gotten off the phone with. HTC says it's the network, and AT&T says it's the phone that is doing the shrinking.
I don't really care who is doing it at this point, unless that comes with an explanation of how to fix it. Once it's fixed I will be curious as to how it all broke, but now I want it fixed.
I started with the setting for a Cingular 8525 and I could not send or receive MMS msgs. At some point I fixed that, and then they got small, but I could send and receive. Before I flashed the ROM I could receive MMS but not reliably send. I received several MMS pics that were over 100 and 200 k, and one over 300k sent from a Razr. I state this because I know the phoen I have can handle it.
If you could post the settings to help me out, or point me to a link in this forum that has those settings (I'm not interested in a link to just a cab file, I want to KNOW how it works), I would greatly appreciate it. I have been looking on the web, this forum (via its search AND google), and the Cingular website, and even playing around with some of the setting, and I havent found the solution.
If you could email me at dragonfire_83 at yahoo dot com I'd appreciate it. I might forget to check the email/PM feature here...
Also, on a related note, what do I have to do to remove the stupidly arbitrary sending limitation of 100k in the MMS config section?
Thanks!
Dan
*bump*
*ok, 10 char minimum bump*
Seriously....?
Ok, here I am DAYS later STILL looking for settings.
I managed to find on the cingular website (why is it that it takes me 30 minutes just to find the tutorial website????) and go back to the settings they have there, but now I'm stuck with the resizing problem.
https://www.wireless.att.com/suppor...sCategory=Picture+Messaging&tutorialId=233040
is the link I followed.
# Server Name: Cingular MMS
# Gateway: wireless.cingular.com
# Port number: 80
# Server address: http://mmsc.cingular.com
# Connect via: MEdia Net
# Sending size limitation: 300k (my phone only does 100k here)
# WAP Version: WAP 2.0
The phone cant send or receive at WAP 1.2, which I think it used to be able to.
I have found an overwhelming number of people and entries with similar problems, yet I have found no solutions.
AllanonMage said:
Hello all!
Problem: MMS is not working "correctly." I have the TX and RX small picture problem to be specific. I have found numerous posts linking to cab files here, there and everywhere, and to be honest there are too many download links for me to feel comfortable picking one that claims to work.
Dan
Click to expand...
Click to collapse
Actually, Its just the RX small picture problem now.
well, as the title implies, I have managed to get some of the mms features working on a telus titan phone
NOTE: as of yet I haven't been able to receive picture messages, but I can send them.
here's how I did it:
1. download then install the attached cab
2. under options -> advanced, then click the manual button and enter the following settings:
MMS Gateway: http://216.198.139.113
MMS URL: http://mmsfeplb01.int.eng.telusmobility.com:8088/mms
select which ever network profile you use for internet
and VOILA!!! half of the problem is solved... now if only someone could figure out how to receive them we'd be set, but I suspect that telus employs some means of the message being redireccted to their horrible online app to view the photos... which at present time, isn't displaying photos and they expire without me seeing them... good old telus, giving users the cutting edge while cutting out user support and features.
P.S. not too bad for my second post on these forums eh?
have you tried it using arcsoft mms and the same server settings?
dcd1182 said:
have you tried it using arcsoft mms and the same server settings?
Click to expand...
Click to collapse
Where can I get arcsoft so I can try it?
dcd1182 said:
have you tried it using arcsoft mms and the same server settings?
Click to expand...
Click to collapse
Haven't tested it yet, but I'll have it tested within the next few hours.
KazW said:
Haven't tested it yet, but I'll have it tested within the next few hours.
Click to expand...
Click to collapse
haven't been able to duplicate the results on arcsoft... I'm new to this whole MMS thing, is there anyway to run a trace and see how this program is doing what is does?
Well as you said it does work for sending, the receiving portion however, I don't believe you will be able to do it since TELUS' MMSC server is programmed not to forward MMS' to phones that have a specific user profile such as the P4000, instead is supposed to send you a net alert and have the pictures forwarded to telusmobility.com/snap.
Unless you somehow get someon to modify your user profile in the MMSC provisioning, there should be no carrier settings or registry tweaks that could help you out, unlike other carriers.
However, why don't you just log into telusmobility.com/snap, go to preferences and set it to forward a copy to your e-mail address. I assume you use e-mail on your p4000 and this will achieve relatively the same thing...
While we are at it, although it is much more convenient to naturaly MMS someone with ther telephone number, you could just e-mail them a picture to their phone, thus using your data plan and not having to pay 25 cents per picture message...
mms email address for telus phones: [email protected]
this should send it straight to a regular phone's wap browser and you just need to get the corresponding email address for Rogers, Bell and Fido
However, why don't you just log into telusmobility.com/snap, go to preferences and set it to forward a copy to your e-mail address. I assume you use e-mail on your p4000 and this will achieve relatively the same thing...
Click to expand...
Click to collapse
I've recently discovered that the e-mail forwarding function only works when receiving MMS sent from a Telus phone. MMS sent from other networks cannot be decrypted correctly so they're not forwarded to the specified email address.
The "save to album" also doesn't do anything. I've checked my photo album at https://photoalbum.telusmobility.com/index.asp . It looks like the site is still under construction or maybe it's just plain crappy. Nothing was saved there from my photo messages.
All and all, I'm very disappointed in Telus in handling (blocking) MMS. I'm searching for a working SMS2Email (or MMS2Email) services now. This way the person sending you the MMS can send it to your email instead. If anyone knows one that works in Canada, Please let me know. I really need to receive MMS somehow, and not on the crappy Telus Snap site (seriously, are they kidding?!?!?!).
Sorry to bump an old thread
This worked great for sending, but has anybody figured out a way to recieve yet?
I just installed it, used the telus server settings as described, but all mms keep getting rejected by server. I definitely double-checked the addys... anyone else follow these instucs with no joy?
chopsxxx said:
I just installed it, used the telus server settings as described, but all mms keep getting rejected by server. I definitely double-checked the addys... anyone else follow these instucs with no joy?
Click to expand...
Click to collapse
ya its not working for me too i have been busting my hump and flippin day lmao anyone know if there is new server information????
thank you very much in advance!!
doesn't work for me.
HTC S640
I can compose a text message and attach a small photo (20 to 50kb) and I get an out of memory error.
this program is very hard to use with a non-touch screen smartphone. Anyway to get it sized for a smaller screen?
i get the same error!!!! i can not get this to work any ideas i have followed everything in the OP!
Make sure you always have a subject or it will be rejected.
KazW said:
well, as the title implies, I have managed to get some of the mms features working on a telus titan phone
NOTE: as of yet I haven't been able to receive picture messages, but I can send them.
here's how I did it:
1. download then install the attached cab
2. under options -> advanced, then click the manual button and enter the following settings:
MMS Gateway: http://216.198.139.113
MMS URL: http://mmsfeplb01.int.eng.telusmobility.com:8088/mms
select which ever network profile you use for internet
and VOILA!!! half of the problem is solved... now if only someone could figure out how to receive them we'd be set, but I suspect that telus employs some means of the message being redireccted to their horrible online app to view the photos... which at present time, isn't displaying photos and they expire without me seeing them... good old telus, giving users the cutting edge while cutting out user support and features.
P.S. not too bad for my second post on these forums eh?
Click to expand...
Click to collapse
I'm wondering if anyone here has tried these settings on Android. I can't make it work, and I've made sure to set a subject on the messages. I don't expect much of a response, but I thought I may as well give it a shot.
Chetebrown said:
However, why don't you just log into telusmobility.com/snap, go to preferences and set it to forward a copy to your e-mail address. I assume you use e-mail on your p4000 and this will achieve relatively the same thing...
Click to expand...
Click to collapse
Because Snap doesn't work right. Never has. When the wife and I first got the HTC S720, a Telus tech tried to get her going on Snap... even pics HE sent to it never showed up. With mine, maybe 30% of pictures sent to me ever arrive at Snap, let alone get forwarded on.
Furthermore, viewing in Snap itself has always been an exercise in futility. The password is about 2,000 characters long; the only way to effectively enter it is cut-and-paste. The only way to get it is to have the server email it to you, and the last time I did that (after I flashed my phone and lost the password), the password *never* arrived. I requested it four times, and never got a response.
And IF you do get a long, the pictures you get there are tiny. My wife ended up returning the S720 and getting a KRZR, so she could do MMS properly... she sent me 1.3MP pictures that only ever showed up as QVGA on the Snap site.
mms email address for telus phones: [email protected]
this should send it straight to a regular phone's wap browser and you just need to get the corresponding email address for Rogers, Bell and Fido
Click to expand...
Click to collapse
I've tried this with Rogers and Fido phones... the recipient gets a text message from my phone's email address, containing a string with the picture's filename, but not the actual picture.
Frankly, Telus's implentation of this is uttery broken and always has been. I've heard a dozen different "explanations" of why MMS won't work on their phones, and every one of them rings as bull$#!t. The most common one for them to give is simply that "no PDA-type phones support it", which I shoot down immediately with the fact that my Rogers Treo does it just fine.
When my wife's contract is up in another 16 months or so, I know she's planning to jump to Rogers so she can get a Blackberry and still do her picture messaging. Telus will lose a 20-year customer if they don't fix this issue; they will have NO chance of keeping her if they don't get MMS working. My contract will be up a year after that, and I won't be far behind her.
Hate to bother, but where is this "options" to put in the information. How do you get to it from the today screen?
Okay, trying this... but I get a "Not enough memory to complete this operation" message when I try to send even the smallest picture. I'm showing 51MB free RAM and 8.8MB free device storage memory...
yyguy said:
Hate to bother, but where is this "options" to put in the information. How do you get to it from the today screen?
Click to expand...
Click to collapse
Look for a new "SMS" icon in your Programs... launch that, click Menu on the right softkey, then Options... go to Advanced tab.
There must be more info required there... maybe the OP could share his settings for Message Center and Email Center numbers?
HOLY CRAP, IT WORKS!!!!
Well, partly... like the OP, I can send, but not receive (yet). The Palm app doesn't want to run on my Omnia (I get the "out of memory" error), but an older Arcsoft install (PPCGeeksSprintMMS) does.
I followed the time-honored hack for that one to enable the server editing (HKLM\Software\Arcsoft\ArcSoft MMS UA\Config\UI\EnableServerEdit -> change 0 to 1), then plugged the OP's server settings into the config:
MMS -> Menu -> MMS Configuration -> Servers -> tap the server name to edit -> enter full Gateway and Server Address entries listed above, Connect via: The Internet, WAP: WAP 2.0 (Port will change to 80).
Now, Arcsoft, at least this version of it, is pretty clunky and doesn't integrate quite as nicely as the Palm app - the Palm one actually re-retrieved the last couple weeks' worth of incoming SMS messages as well(!!). This one keeps a separate inbox that so far is extraneous.
Update: okay, it worked... like, TWICE. I tried replacing the clunky ancient version of Arcsoft with a newer version and I haven't been able to get it to go since. I've even done a hard-reset and reinstalled it all clean... went through a bout of not being able to remove the WM6_threaded app as well.
If the OP is still reading this... could you maybe post your related registry keys? Thinking there must be some other string that I need, something that's either incorrect or missing... *sigh*
So near, yet so far away...
Just flashed 6.5 on my phone 24 hours ago (thanks to a few of you on here) but can't get MMS to work. As a matter of fact, I don't even see it as an option in any of the menus. Is there anyone out there who has been able to install an external MMS pack with their 6.5 and get it to WORK? Any help would be greatly appreciated!
i am sorry, but the rules of this forum demand you search first, use forum search, use google, look it up in the wiki!
this exact same question came up on 04/02, 3 days ago. but anyway, i'm not here to give you a speech about that. let me explain it to you:
mms is more than just another mail account, it has complex settings and rules and you need to set up rules for sending and receiving that are not comparable to e-mail accounts. that is why, even if you knew all the settings for your carrier in your country, you would have no success in creating a new account. there is a program out there called arcsoft mms, (which i recommend you to use as a search phrase next time ) it is about 2mb, you can download it here: http://www.megaupload.com/pl/?d=DQEKP22D i haven't tested it myself, but the link is given in the wm6.5 21198 thread and the filename is sprintmms. you install the cab and this will create the account for you and make basic settings, you still have to set your country specific and carrier specific settings, which you can look up on your carriers site. if you can't find it, post again and i will look it up.
have fun with it
greetz
Chef_Tony
Wrong
in downloaded a few different versions of arcsoft mms and got all the settings put in. the program worked 30% of the time half assed and the rest of the time it just locked up my phone... PLEASE! ANY HELP WITH THIS WOULD BE GREATLY APPRECIATED!!
shaunehannen said:
in downloaded a few different versions of arcsoft mms and got all the settings put in. the program worked 30% of the time half assed and the rest of the time it just locked up my phone... PLEASE! ANY HELP WITH THIS WOULD BE GREATLY APPRECIATED!!
Click to expand...
Click to collapse
Also tried a few arcsofts and eventually had to downgrade to an earlier version so that I could chose wap version due to my carrier
ArcsoftMMS4.2.8.1 came with ROM
try to sort by other such as "Received"
or install ArcSoft v5.0.71.33 it's worked on my device with wm 6.5
this works on my device
http://forum.xda-developers.com/showthread.php?t=476947&highlight=CRCs_ArcSoft_MMS_v5