Hello!
I Tried To Install A Custom ROM But After Its Successful Installation Using CWM When I Rebooted The Fone it didnt booted!
No Key Combinations Work ETC!
But When I Connect it to the pc i hear a sound on windows!
I Also Checked On Device Manager IT Shows Some LGE AndroidNet USb Serial Port(COM15)
Please Help Me! I Don't Wanna Go To The Service Center!
I Bought The Device Like 2 Or 3 years Ago I Don't Remember And Also The Device Is Rooted So Warranty Is Void. Please
AppY.fTw.wOw^ said:
Hello!
I Tried To Install A Custom ROM But After Its Successful Installation Using CWM When I Rebooted The Fone it didnt booted!
No Key Combinations Work ETC!
But When I Connect it to the pc i hear a sound on windows!
I Also Checked On Device Manager IT Shows Some LGE AndroidNet USb Serial Port(COM15)
Please Help Me! I Don't Wanna Go To The Service Center!
I Bought The Device Like 2 Or 3 years Ago I Don't Remember And Also The Device Is Rooted So Warranty Is Void. Please
Click to expand...
Click to collapse
I no longer use this device, so I'm not aware if other users had the same issue like you.
First, did you try searching this forum for similar issues?
If not, it might be a better good place to start.
Second, please explain better whats happening to your phone:
Can you turn it on? If you can, what do you see?
Can you enter recovery mode? (volume down + home + power)
Can you enter emergency mode? (volume up + volume down + power)
Did you try flashing stock firmware with KDZ-flasher?
What ROM did you try to install? Did you check the ROM's page in these forum?
need4steer said:
I no longer use this device, so I'm not aware if other users had the same issue like you.
First, did you try searching this forum for similar issues?
If not, it might be a better good place to start.
Second, please explain better whats happening to your phone:
Can you turn it on? If you can, what do you see?
Can you enter recovery mode? (volume down + home + power)
Can you enter emergency mode? (volume up + volume down + power)
Did you try flashing stock firmware with KDZ-flasher?
What ROM did you try to install? Did you check the ROM's page in these forum?
Click to expand...
Click to collapse
Hello Bro,
When I Try To Turn It On It Vibrates
I Tried To Enter The Recovery Mode But When I Try To Do The Capacative Touch Buttons Light Up For A Second OR Two, The Device Vibrates And Then Again Dead!
Cant Enter Emergency Mode Same Thing Happens Above There ^
Tried To Flash Using KDZ But Device Was Not Found!
I Tried To Install iPhonoid Rom From http://theunlockr.com/roms/android-roms/lg-roms/lg-optimus-l3-e400-roms/
Also When I Try To Connect The Device Through USB I Hear The Sound But It Fails To Install 1 Driver! (USB MTP Device)
When I checked using adb in cmd by the command
Code:
adb devices
i get the list of devices attached and it shows my device there!
Thanks!
AppY.fTw.wOw^ said:
Hello Bro,
When I Try To Turn It On It Vibrates
I Tried To Enter The Recovery Mode But When I Try To Do The Capacative Touch Buttons Light Up For A Second OR Two, The Device Vibrates And Then Again Dead!
Cant Enter Emergency Mode Same Thing Happens Above There ^
Tried To Flash Using KDZ But Device Was Not Found!
I Tried To Install iPhonoid Rom From http://theunlockr.com/roms/android-roms/lg-roms/lg-optimus-l3-e400-roms/
Also When I Try To Connect The Device Through USB I Hear The Sound But It Fails To Install 1 Driver! (USB MTP Device)
When I checked using adb in cmd by the command
Code:
adb devices
i get the list of devices attached and it shows my device there!
Thanks!
Click to expand...
Click to collapse
It's very problematic that you can't enter your device into emergency mode.
I think the only option that is left regarding software is to uninstall all of the drivers that are already installed for you device,
installing the latest drivers from the official site, and then try to use LG Mobile Support Tool to flash stock firmware.
Other than that you can only send it for a hardware repair
need4steer said:
It's very problematic that you can't enter your device into emergency mode.
I think the only option that is left regarding software is to uninstall all of the drivers that are already installed for you device,
installing the latest drivers from the official site, and then try to use LG Mobile Support Tool to flash stock firmware.
Other than that you can only send it for a hardware repair
Click to expand...
Click to collapse
Bro i Tried To Use LG Mobile Support Tool And In Downloading Mode (Remove Battery>Press And Hold Volume Down Button>Plug In USB) It Gets Recognized (Only In Downloading Mode) And Shows The The Device LG E400 Has The Latest Software Installed V20A. When I Try To Use Update Recovery It Downloads A File Of 166.76 MB And Then Starts Installing it But It Gets Stucks @ 4 % For 5-10 Mins And Then The Tool Asks Me To Replug USB Etc And Then Retry But Same Thing Happens!
In Downloading Mode The Device Is Also Recognized By KDZ Updater But While Flashing A Stock Rom I Get An Error Of wParam And lParam!
Please Help!
Thanks
your device not die yet, try use LG support tool again, when it stuck at 4% or above, reboot your phone while plugging in computer. after that, hope it continue processing. this had worked with my fiend's phone
kien_vip said:
your device not die yet, try use LG support tool again, when it stuck at 4% or above, reboot your phone while plugging in computer. after that, hope it continue processing. this had worked with my fiend's phone
Click to expand...
Click to collapse
tnx for the reply ill give it a try :good:
btw how to i reboot? using the power button??
Hey Bros!
I Found That In LG Support Tool It Says The In The Phone The Software Version Installed Is V20A
But There Is No Such Software Version For The Device L3 In LG Firmware Download Page!
But There Is One For LG Optimus L5
So I Guess That I Installed The Rom For L5 To L3 And It Is Bricked Now So Any Solution? o:
Thanks
AppY.fTw.wOw^ said:
Bro i Tried To Use LG Mobile Support Tool And In Downloading Mode (Remove Battery>Press And Hold Volume Down Button>Plug In USB) It Gets Recognized (Only In Downloading Mode) And Shows The The Device LG E400 Has The Latest Software Installed V20A. When I Try To Use Update Recovery It Downloads A File Of 166.76 MB And Then Starts Installing it But It Gets Stucks @ 4 % For 5-10 Mins And Then The Tool Asks Me To Replug USB Etc And Then Retry But Same Thing Happens!
In Downloading Mode The Device Is Also Recognized By KDZ Updater But While Flashing A Stock Rom I Get An Error Of wParam And lParam!
Please Help!
Thanks
Click to expand...
Click to collapse
When saying download mode you're referring to emergency mode?
Do you see in your phone that you're in emergency mode?
AppY.fTw.wOw^ said:
Hey Bros!
I Found That In LG Support Tool It Says The In The Phone The Software Version Installed Is V20A
But There Is No Such Software Version For The Device L3 In LG Firmware Download Page!
But There Is One For LG Optimus L5
So I Guess That I Installed The Rom For L5 To L3 And It Is Bricked Now So Any Solution? o:
Thanks
Click to expand...
Click to collapse
Maybe try what @kien_vip suggested.
And maybe try flashing the right stock version with KDZ-flasher.
need4steer said:
When saying download mode you're referring to emergency mode?
Do you see in your phone that you're in emergency mode?
Maybe try what @kien_vip suggested.
And maybe try flashing the right stock version with KDZ-flasher.
Click to expand...
Click to collapse
Hey,
When i say download mode i mean (Remove Back Cover and Battery>Plug in USB while pressing Volume Down Key!)
As far as i guess we can enter emergency mod by pressing both the volume keys and power key at the same time.
I tried using KDZ but at some point gives me an error of WParam and LParam as I posted above.
AppY.fTw.wOw^ said:
Hey,
When i say download mode i mean (Remove Back Cover and Battery>Plug in USB while pressing Volume Down Key!)
As far as i guess we can enter emergency mod by pressing both the volume keys and power key at the same time.
I tried using KDZ but at some point gives me an error of WParam and LParam as I posted above.
Click to expand...
Click to collapse
Yes, you're right - to enter emergency mode hold volume up + volume down + power
When you're inside you'll see on your screen "EMERGENCY MODE" on a yellow background.
Only the use KDZ-flasher or the lg mobile support tool.
If you're indeed in this mode, then try what @kien_vip suggested above.
need4steer said:
Yes, you're right - to enter emergency mode hold volume up + volume down + power
When you're inside you'll see on your screen "EMERGENCY MODE" on a yellow background.
Only the use KDZ-flasher or the lg mobile support tool.
If you're indeed in this mode, then try what @kien_vip suggested above.
Click to expand...
Click to collapse
I tried to enter the mode but failed!!
The buttons just light up for a second or two then vibrate then again dead.
I Cant Enter Emergency Mode But Download Mode!!!
NO Volume Up+Volume Down+ Power Button
But
YES Volume Down Pressed While Plugging In USB
AppY.fTw.wOw^ said:
I tried to enter the mode but failed!!
The buttons just light up for a second or two then vibrate then again dead.
I Cant Enter Emergency Mode But Download Mode!!!
NO Volume Up+Volume Down+ Power Button
But
YES Volume Down Pressed While Plugging In USB
Click to expand...
Click to collapse
Then all is left for you is to try what @kien_vip suggested previously.
need4steer said:
Then all is left for you is to try what @kien_vip suggested previously.
Click to expand...
Click to collapse
Before entering emergency mode you should remove the battery for a few seconds. Place it back into your phone then enter into emergency mode. Hope this could help you.
Lg update tool uses baseband as the only check whether your device has the latest update. This means you will get the update if you use an older baseband. However, you should try emergency option.
Thanks To All Of You Guys Problem Solved!
Took It To Local Repair Center And Using RIFF BOX JITAG They Solved It!
It Costed Me INR - Rs. 600 Or USD - Around 10 $!
Thanks Everyone! :good:
AppY.fTw.wOw^ said:
Thanks To All Of You Guys Problem Solved!
Took It To Local Repair Center And Using RIFF BOX JITAG They Solved It!
It Costed Me INR - Rs. 600 Or USD - Around 10 $!
Thanks Everyone! :good:
Click to expand...
Click to collapse
Good to know!
Thanks a lot for the detailed information.
hi
I have lg optimus e400, first I flash ICS cyanogenmod then I return to stock ROM....then I discovered a kitkat update and I flash it but due to my vision issues again I returned to stock ROM, until I noticed really odd problem my system memory became smaller, 62MB to be specific, which is usually 125mb free space after a factory reset, I do the reset again and again using factory reset on settings and in the cwm recovery and nothing happens my installed apps is still there ,,other than that many apps stopped unexpectedly and doesn't work anymore (e.g. message, camera, gapps,WAP/mobile data,com.android etc)...
solution I tried:
-factory reset
-ROM reflashing
-clearing data and fix permissions via cwm recovery(this one fix the gapps and com.android force stopped)
any suggestions ....
thanks any effort and help is much appreciated..
allainvillanueva said:
I have lg optimus e400, first I flash ICS cyanogenmod then I return to stock ROM....then I discovered a kitkat update and I flash it but due to my vision issues again I returned to stock ROM, until I noticed really odd problem my system memory became smaller, 62MB to be specific, which is usually 125mb free space after a factory reset, I do the reset again and again using factory reset on settings and in the cwm recovery and nothing happens my installed apps is still there ,,other than that many apps stopped unexpectedly and doesn't work anymore (e.g. message, camera, gapps,WAP/mobile data,com.android etc)...
solution I tried:
-factory reset
-ROM reflashing
-clearing data and fix permissions via cwm recovery(this one fix the gapps and com.android force stopped)
any suggestions ....
thanks any effort and help is much appreciated..
Click to expand...
Click to collapse
Hey, Sorry If im Replying Too Late.
Try Re-Flashing Stock RoM Using Kdz Updater.
This Should Help You! Then If You Want To Root Again Try SuperOneClick Root (Easiest Way) And Install CWM
I have LG Optimus L7, i tried a lot of ROMS already, recently i port RaafaaPaintt Rom, i really love the performance i actually reached 5000 on benchmark, i guess this is the most stable and fastest ROM for P705 or P700, however im planning to buy a new phone and i want to port this to its stock rom, but i guess i have to resolve this problems first.
Problem:
1. My boot logo was changed to XPERIA (i noob buyer wouldnt like it)
2. unable to enter emergency mode or download mode (by removing battery, pressing vol down or up then put usb)
(im trying to revert to stock rom with LG KDZ UPDATE)
Question:
1. Since im not able to enter download mode or emergency mode, can i intentionally softbrick my phone to force emergency/download mode?
2. Is there other way that i can return to stock rom without download/emergency mode?
My Options to softbrick:
1. use bricker 1.0
2. port incompatible rom (to become unstable and enter to emergency mode i guess)
3. or intentionally brick it using adb commands
i downloaded CM 10 by RaafaaPaintt here
im trying to figure this out for a week already
please help me guys :crying:
I get today my ZUK and receive a new update and now i have YOG4PAS34N. On the Cyanogen Homepage i find only OG4PAS3OH. Which one is now newer? There is also 3 files on the Homepage:
cm-12.1-YOG4PAS3OH-ham-signed-fastboot.zip
cm-12.1-YOG4PAS3OH-ham-signed.zip
cm-12.1-YOG4PAS3OH-ham-boot-debuggable-f054112b85.img
Which file i need it whene i will return to stock with original recovery and how can i flash this?
Edit: I get now 2 new updates and now i have the latest version.
can the YOG4PAS34N make someone available for downloading?
Thx Phoenyx
YOG4PAS3OH is the latest version.
same here bro YOG4PAS3OH
Schrotty35 said:
I get today my ZUK and receive a new update and now i have YOG4PAS34N. On the Cyanogen Homepage i find only OG4PAS3OH. Which one is now newer? There is also 3 files on the Homepage:
cm-12.1-YOG4PAS3OH-ham-signed-fastboot.zip
cm-12.1-YOG4PAS3OH-ham-signed.zip
cm-12.1-YOG4PAS3OH-ham-boot-debuggable-f054112b85.img
Which file i need it whene i will return to stock with original recovery and how can i flash this?
Edit: I get now 2 new updates and now i have the latest version.
Click to expand...
Click to collapse
bood your phone again, and the new software comes again, Repeat this a few times and you'll get the latest software :good:
YOG4PAS3OH feels laggy on my device
Factory reset doesn't seem to fix this
How's everyone else with latest ota?
Sent from my Z1 using Tapatalk
airplane mode
hi, any body have problems with airplane mode? i cant turn off airplane mode after full discharge phone. (here second time) in power menu airplane button not active after restart hi active but when turn off sim cards still offline and after reboot flight mode showing on on power menu.
any ideas?
I recently flashed v26kdz(Official beta pie) using fota in lg up. The problem is it crashes when i install apps from playstore on restarting. The screen goes balck but the other functions are working fine(notification sounds and when i press and hold the power button the restart and power off options are visible, I can also use camera but sytem ui is stopped and cant do anything about it . i have seen on the internet this is called black screen of death of android). The only solution is reset and then it again works for some time a day or two and crashes after a restart. I know this is a beta so i want to go back to oreo the real culprit is i keep getting this error on lg up "Error: 0x81000302, Please use latest DLL LAF Protocol version is not match DLL=123213496 Device = 166039584" Screenshot is attached whenever i flash using lg up (Refurbish or upgrade option). I have done reinstalling everything on pc (Drivers, lgup, dll)and the error continues and i had successfully flashed oreo using lg up on my phone in the past. There is not much on the xda related this error on lg g6 , i guess i need the dll for lg g6 pie.
Can anybody help with this error?
Screen shot:
https://imgur.com/a/R5gheAo
You can use a third-party desktop.
Same problem brother!!Did you find a way to fix this??
Same problem brother!!Any luck finding how to fix this??
ali.lantern said:
Same problem brother!!Any luck finding how to fix this??
Click to expand...
Click to collapse
At the end how you fix this error? I have the same error.
---------- Post added at 05:08 PM ---------- Previous post was at 05:05 PM ----------
ASHER JHNAID said:
I recently flashed v26kdz(Official beta pie) using fota in lg up. The problem is it crashes when i install apps from playstore on restarting. The screen goes balck but the other functions are working fine(notification sounds and when i press and hold the power button the restart and power off options are visible, I can also use camera but sytem ui is stopped and cant do anything about it . i have seen on the internet this is called black screen of death of android). The only solution is reset and then it again works for some time a day or two and crashes after a restart. I know this is a beta so i want to go back to oreo the real culprit is i keep getting this error on lg up "Error: 0x81000302, Please use latest DLL LAF Protocol version is not match DLL=123213496 Device = 166039584" Screenshot is attached whenever i flash using lg up (Refurbish or upgrade option). I have done reinstalling everything on pc (Drivers, lgup, dll)and the error continues and i had successfully flashed oreo using lg up on my phone in the past. There is not much on the xda related this error on lg g6 , i guess i need the dll for lg g6 pie.
Can anybody help with this error?
Screen shot:
https://imgur.com/a/R5gheAo
Click to expand...
Click to collapse
I have the same error. You fix it.?