I am experiencing a problem when I am on an incoming call talking and I get the beep for a second incoming call. I keep talking on call one, when suddenly I am not able to hear the first caller. The display shows first call still running.
Has anyone else experienced this before I take phone back to dealer and does anyone know of a cure. My callers are getting a bit frustrated at being cut off.
I have ROM 1.66.00WWE, dated 02/20/04, downloaded from O2 official site and radio ver 1337.18. My XDA2 is unlocked using XDA developers tool. My SIM is on the Orange network in UK.
Any help gratefully appreciated.
Richard Racer
Same problem - no solution yet?
dropped calls
Hi there,
I eliminated the problem by removing the bluetooth tools BT stack software. problem went away.
Regards
Richard
Hi all,
just wondering about an issue, that must concern many who have two SIMcards, one for business and one private.
I normally have my private SIM card in the device (TRION), so that when I call friends, they see its me through my caller ID. I have my business SIM card diverted, so calls are transferred to my private number.
The trouble is, I cant see on which card the call is coming in, since I cant allways identify if its a business or private call by the caller ID in my display, cause sometimes I just dont knwo the number or there isnt any. After hours I just dont want to take business calls, but taking out the diversion is to much effort.
Nokia devices have a little arrow that indicates this. Does anyone have a clue for WM5 ??
Greetings
Paddy
I've got excactly the same question. I already thought about connecting a second device with the buisness card to my pc at home and enable/disable the diversion with the help of a webinterface (and call it via start menu).
Anybody outthere, that knows a fix ?
I would be extremly grateful! donateful ;-)
Paddy
I've the same question .
Hello,
I bought a new HTC advantage x7501 unlocked, trying to use it on Fido network, however whenever I call the unit, the unit does not being to ring until at least the second ring, usually the third and often I miss a phone call completely. The signal strength is at its maximum when tried this. I did do a hard reset, searched google and all nada. Can someone please help ?
Thanks
Just tonight I was running call tests on my unit, and I see the same 2-ring delay. Doesn't matter if its asleep or fully on. I still have plenty of time to answer before voicemail kicks in. That delay is dictated by your carrier.
What sim card are you running? Do you know? Is there any way the check if you have the 64k or the 128k? I found some threads not related specifically to the X7501 but to the HTC hermes, that if you have the 64k sim card and an HTC hermes you might get some communication troubles, but that thread was pretty old and I'm sure HTC fixed that issue already.
Anyhow, hard reset doesn't solve this problem, and I do not even know how to begin addressing this issue.
Try some or all of the following:
Make sure your ringtone is in the Windows folder, or the ringtones folder.
Try a .wav ringtone (yes, i prefer mp3 too - wavs are too big)
Tweaks2k2.net has a disable 3 second delay option - there is probably a registry key somewhere.
marek101 said:
Hello,
I bought a new HTC advantage x7501 unlocked, trying to use it on Fido network, however whenever I call the unit, the unit does not being to ring until at least the second ring, usually the third and often I miss a phone call completely. The signal strength is at its maximum when tried this. I did do a hard reset, searched google and all nada. Can someone please help ?
Thanks
Click to expand...
Click to collapse
which radio version are u using sometimes it is releated to the radio version and upgrading or downgrading to another rdio helps the problem. missing calls are mostly releated to radio version of devices.
I have not flashed this unit at all, and the default ringtone is there and yes I tried changing it too.
I'm begging to suspect that this might be a sim card issue. I'm using SM-32 from fido, is there one that is sm-64 or 128? google search did not reveal much..
Thanks
hi,
i use phonealarm software with my athena, and i have the next issue:
if i active phonealarm, the phone sounds after the second or third ring,
but if i deactive phonealarm, the phone sounds just after the first rings.
use you PA soft?
note: i have tested and obtained the same results storing the rings at the
storage card, microdrive or programs memory. the problem is PA !!
next probe:: enable PA but set to "System" the "ring" and "ring type" parameters
at the all profiles. the result is fine: plays the configured sounds after the
first ring [i use mp3]
S.O.S
Is PhoneAlarm software enabled by default? I can not seem to be able to locate this anywhere on the phone?
Plus I got a little bit further with Fido, I have disabled my voicemail and now the phone rings after the second ring. Does this make any sense to anyone ?
S.O.S
SOLUTION TO THIS PROBLEM, READ:
Simple, the "Radio" code that comes with the x7501 / x7500 unlocked can NOT handle the the "Name Display" feature properly, thus causing the phone to miss class and or ring later. In EU they do NOT have "Name Display", wow. Thats the problem. I wish to that I found the answer sooner, I thought that is the purpose of such boards like these, no? Am I that wrong?
http://www.palonek.ca/
Just need to call your carrier and have them increase the ring count before voicemail picks up. Tonight at dinner my mother complained about this on her phone - it would go to vm after 3 rings. She called cust service and upped it to 6 rings. Problem solved.
marek101 said:
SOLUTION TO THIS PROBLEM, READ:
Simple, the "Radio" code that comes with the x7501 / x7500 unlocked can NOT handle the the "Name Display" feature properly, thus causing the phone to miss class and or ring later. In EU they do NOT have "Name Display", wow. Thats the problem. I wish to that I found the answer sooner, I thought that is the purpose of such boards like these, no? Am I that wrong?
http://www.palonek.ca/
Click to expand...
Click to collapse
is the solution at the palonek web ?? i don't not !!
Hi guys, I have a XDA Mini-s.
I'm wanting to setup call diverting or some method so when a certain number calls it forwards them straight to my answer machine (as if my phone is switched off).
Does anyone know of any programs that do this? Thanks.
MagiCall works good
http://www.download.com/3000-11139_4-10678798.html
I haven't tried this, but you might want to...it may be the answer.
http://blogs.msdn.com/windowsmobile/archive/2006/10/23/the-mobile-secretary.aspx
Hi All, I am having problem of SMS missed call alert, in my windows mobile phone (HD2), when i received a call while there is no signal of phone, I will get a missed call SMS alert when the phone is back into signal, this doesn't happen in I9000, I know this might be network related, but I am using the same Sim card and I couldn't find anywhere to enable this function.
Do you all have SMS alert telling you your missed call? Or is this an issue of I9000 or even Android?
p.s. It's been a long time since my last post, nice to see you all here!
anyone has any idea? it really bother me since I now don't know who has call me when my phone has no signal....
Pretty sure that's a service provider feature and nothing to do with the phone.
that's what I thought, but I use the same sim card, and it was working fine on my HD2 before, do yours give you sms alert?