Database Users

Easiest Way to VGA

Can someone please explain the easiest way to get VGA resolution on my XDA Exec? Am I right in assuming that although the screen has a 640x480 resolution, they use pixel doubling to negate it and it actually runs at the same resolution as my Dell Axim X5 (320x240)?
Is there a simple registry hack that disables this, or do I have to botch around installing a hack and then trying to botch all my apps to run in the new resoluition? Does anyone know if TomTom5 works in VGA mode?
I'm sure this has been covered already, but some of the topics are 13+ pages and date back quite a bit, and the site is a tad slow to trawl through lots of postings and searching for VGA brings up hundreds of topics.
Thanks in advance for your helps folks.

This is the best thread - there is a ZIP file on page one that I dobwloaded and it contains all the instructions to get things working
http://forum.xda-developers.com/viewtopic.php?t=32217

this is the post I didn't particularly want to have to trawl through, as it's 13 pages long and really slow to switch pages.

TheFair - as noted above, there is a zip containing instructions. You don't have to read all 13 pages, although it's useful background reading - we didn't write all 13 pages just for fun .
I had to do VGA again yesterday, for the first time in a long time, and it's very simple. Basically:
Unzip, copy files to windows, click ozvga, reset.
V

OK, thanks Vijay. Will I need to install your Bigphone application and replace other system apps once done? Also, any idea if TTN5 works in VGA mode? As my XDA is used primarily as a SatNav, I'll stick with QXGA if it's not going to work properly.
Thanks

thefair1973: VJBigPhone can be used to make the phone app usable again, (I don't use my Uni as a phone, so I don't use it ) Replacing system apps etc is optional, but obviously helpful if you use the apps effected.
No idea about TTN5, but it's basically one click to revert to QVGA, so I'd do a backup and just give it a go if I were you!
V

great, thanks very much for your help Vijay.

I use TTN5 and VGA. TTN appears to drive the screen directly, so you don't get any extra resolution, but it works fine

I use TTN5 and VGA. TTN appears to drive the screen directly, so you don't get any extra resolution, but it works fine

Is VGA in Universal already perfected? Which applications are still not showing right upon application of this hack?

Just finished reading the VGA thread. I have a headache now. One important question though, I am using the latest JASJAR ROM, would OZVGA work on this new ROM?

Yes, I did it yesterday with no probs.
V

vijay555 said:
Yes, I did it yesterday with no probs.
V
Click to expand...
Click to collapse
Thanks Vijay! I just performed a hard reset, so I am ready to try something new. I downloaded the file compliled by Khashim I believe, I'll check if I got his name right. Which one did you use? Is it the file from Carnivor or Khashim? (Yes it is Khashim.)

I think originally I used Carnivor's, but frankly, I had an old set of files that had been sitting on my SD card for some time (I've posted the zip in that thread as well, towards the end).
However, I don't think there's a big difference. Use the one that sounds positive. It's easy to copy over new files if required. But you should only need to fiddle with it if you see problems in some of your apps. I don't use many apps, but I don't see any problems.
V

I tried. It does look wonderful for browsing using PIE. But I do agree that the font are too small. I also tried VJBigPhone and it did made the buttons larger, but the bottom part has a different color. Did I miss something about the skin?
Comm Manager has the same problem about the skin on the bottom part.

I love how ozVGA changes PIE, but weighing the benefits on other applications I use, I decided it is not for me at the moment. I hope someday someone can implement an application to run a specific application on VGA mode selectively and not implement it on the whole device. Thanks for the responses.

cktlcmd said:
I love how ozVGA changes PIE, but weighing the benefits on other applications I use, I decided it is not for me at the moment. I hope someday someone can implement an application to run a specific application on VGA mode selectively and not implement it on the whole device. Thanks for the responses.
Click to expand...
Click to collapse
try tweaks 2k2 vga brute force

cktlcmd: there is a background fix for the phone on my webpage and in the VJBigPhone thread. I haven't looked at the comm manager fix yet.
Waiting for a more selective pixel doubling patch may take a while or be futile. I think it's possible but I've not had time to implement my own hack yet.
V

I've done the VGA hack & overall its a major improvement.
The size of toolbars & the fact that some fonts are too small is a nause, same as the programs that don't display properly. But its SOOO good to see so much text on the screen.
To be honest, if it doesn't really run at 640x480, is it not a case of false advertisment? Just a thought.

xyon: it is running at VGA (640x480), but just making everything sharper and emulating 320x240. I asked an Orange spokesman once and he said they were going for "quality over quantity". I suspect they just didn't know how bloody persistent haxxors could be
I prefer 640x480, but it does make day to day usage inconvenient. Perhaps all apps will eventually have native 640x480 support. But given how many years it took to go back to square screen support, I'm not very hopeful!
V

Lumines for PPC

Has anyone played the GREAT PSP puzzler Lumines? If not, I suggest you all play this flash clone here http://www.gamesforwork.com/games/play-7737-Ryokan-Flash_Game .
I was wondering if anyone was developing a mobile version of this game? This is an absolutely amazing game. The music and graphics are a sight to behold, and the gameplay is as addicting as ever. Some go as far as saying it's the new Tetris.

It would be awesome to get a port for this game. I have it on PSP and also on Xbox 360 (Live download). Great game!

I Hear you. I've been looking for Lumines for the longest time, even trying to play the flash variants on my phone (too slow). Actually, i was thinking a Meteos clone would be even better, but no one has even tried to tackle that, so I've pretty much given up on it, lol. Anyway, i think i found what you want, I haven't tested it yet but it is FREEWARE, which is always great
http://www.zielok.com/?action=onegame&game=samulos
Hope it works
[edit]
ok i tested it just now, initially i was superexcited because it seemed to be just like Lumines. however, the difference is that, you know that sweeping line that clears up the combos? it's gone. it's replaced by a timer, and all combos disappear when the timer reaches zero. kinda removes some of the fun, trying to toss in more blocks before the line clears it away, but other than that it's a great way to satiate my PSP envy.

cab file
i have made a cab.

Ahh close, but it's not quite Lumines.
Is anyone working on a clone? Or even a port, since apparently it's open source and out for PC?

Check out Loomies. I haven't tried it but looks like the original.

This is the version from w800i it's 240x320 and works with latest jbed

but it gets stuck at the "activate sound" page for lumines.zip. can anyone tell me how to get across that page.

like los1223 posted Loomies is a clone of Lumines. Sad part is its not free. Link to the Loomies site http://www.clickgamer.com/moreinfo.htm?pid=13963&section=PPC

[GAME] DiamondTris - Tetris with support for VGA, stylus & wheel sensor

Updated: 2009-01-03, 21:05 (GMT+1)
Me and Swoop2 is creating a Tetris game for us HTC Touch Diamond users out there in need for a great one! Why I wanted to create a new Tetris game for the HTC Touch Diamond was because all of the Tetris games out there got some flaws (imo); not supporting VGA resolution, visually looking bad, running slow etc.. The closest thing I got was TeKnowMagic Tetris, but I wasn't satisfied either way. There's simply no Tetris game out there filling my requirements.
DiamondTris so far:
VGA resolution
Moving pieces - with the wheel sensor or via the on-screen buttons
Rotation of pieces - with the enter button or via the on-screen buttons
Line completion and destruction
Statistics: score, hi-score, level, lines done/remaining
Difficulties: easy, medium, hard (different speeds)
What needs to be done:
Some minior GUI tweaks
Sound effects
Settings (sounds, controls)
You'll need .NET Framework 3.5, which you'll find here
Changelog:
DiamondTris_20090103.cab:
Installs on device or internal storage
Creates a shortcut in Programs\Games
Pause function implemented
DiamondTris_20090102.cab:
New, better looking on-screen buttons
Added some statistics
Disabled piece rotation by tilting the device (needs further tweaking)
Application icon added

+1
sounds like a fairly simple and easy project... if only i had listened in class...

Why don't you get some pledges to encourage a developer
I would pay around £3 for a tetris game designed for our device
Not loads, but if enough people were too pledge their support...

hays said:
Why don't you get some pledges to encourage a developer
I would pay around £3 for a tetris game designed for our device
Not loads, but if enough people were too pledge their support...
Click to expand...
Click to collapse
good idea.
i'll let hays pay £3 for a Tetris game
(and i suppose i could chuck a few quid in as well )

Of course I'm in for some donations if this game is created

I started a very basic Tetris app for my touch diamond a while ago - just as a play around as my first Windows Mobile application. It uses the wheel for moving the current piece left and right and I was going to have a go at using the accelerometer to turn the piece clockwise/anticlockwise (i.e. a flick to the left or right).
I've never used OpenGL or anything so it was just done using a timer and the graphics object off the OnDraw event. I got as far as creating the grid, drawing the pieces, moving them around and knowing when lines were completed, etc. Still had a lot to do but it was a proof of concept more than anything else.
I'm just a normal application developer and develop form based applications and back end stuff. If I can get to where I am with my effort in the time I have, then someone who knows how to write games properly could easily do something really good.

Swoop2 said:
I started a very basic Tetris app for my touch diamond a while ago - just as a play around as my first Windows Mobile application. It uses the wheel for moving the current piece left and right and I was going to have a go at using the accelerometer to turn the piece clockwise/anticlockwise (i.e. a flick to the left or right).
I've never used OpenGL or anything so it was just done using a timer and the graphics object off the OnDraw event. I got as far as creating the grid, drawing the pieces, moving them around and knowing when lines were completed, etc. Still had a lot to do but it was a proof of concept more than anything else.
I'm just a normal application developer and develop form based applications and back end stuff. If I can get to where I am with my effort in the time I have, then someone who knows how to write games properly could easily do something really good.
Click to expand...
Click to collapse
Ah, that sounds great! Got any plans on continuation of your work? Onscreen buttons instead of accelerometer sounds even better imo, and is easier to do I think..?
Care to share your source? I can have a look at it myself and see if I can get into Mobil application programming too... or at least someone else here can continue on your base work.

I do plan on finishing it at some point - though I'm not 100% sure when! I don't mind sharing the code anyway, so once I'm back home I'll try and remember to put it on here.

Swoop2 said:
I do plan on finishing it at some point - though I'm not 100% sure when! I don't mind sharing the code anyway, so once I'm back home I'll try and remember to put it on here.
Click to expand...
Click to collapse
Sounds cool. Looks like I might get a good weekend after all! Do... not... forget... the... add... the source code!

Here's the source code. It is VERY much a work in progress. I started it as a windows application and ported it over to WinMob6. Here's a list of things that I know I still needed to do:
1. Optimise the graphics to get rid of the irritating flicker.
2. Add the piece rotation.
3. Add the score and level display, etc.
4. Decide on the size of the grid (considered leaving it customisable).
5. Add score saving and option saving, etc.
6. Add some backing music.
They're the things I can remember off the top of my head anyway. Lemme know if you have any ideas or questions, etc.

Swoop2 said:
Here's the source code. It is VERY much a work in progress. I started it as a windows application and ported it over to WinMob6. Here's a list of things that I know I still needed to do:
1. Optimise the graphics to get rid of the irritating flicker.
2. Add the piece rotation.
3. Add the score and level display, etc.
4. Decide on the size of the grid (considered leaving it customisable).
5. Add score saving and option saving, etc.
6. Add some backing music.
They're the things I can remember off the top of my head anyway. Lemme know if you have any ideas or questions, etc.
Click to expand...
Click to collapse
Sweet! I'm at home now, downloading all the requried applications to put up a proper environment here... big packages, so it'll take a while until I'm set.
I'll see if I can manage to do anything, and in case - I'll get back to you

Hi there again Swoop2!
Just tweaked the grid some, added some stats + onscreen buttons (stretched until later ;P) and changed some minor stuff. Here's my latest source. Thanks for sharing!
There's still bunch of stuff to tweak and add. Adding rotation to the game would make it fairly playable. The screen flickering is quite annoying, but perhaps we'll manage to get it working right in the future
Also adding a screenshot of how it looks with the current source.
EDIT: removed the source code, since there's a newer one out there.

Hi Sibbor
That's looking pretty good mate - I like it! I already have some ideas on how to fix the flicker - for the majority of the time anyway. Rendering the image as a bitmap in the background and then just drawing that should hopefully work like a double buffer or something. Also, only invalidating the relevant part of the screen instead of all of it should make a difference too. It worked for my other application anyway.
I'll try and have a play with it this week and send you an update

Swoop2 said:
Hi Sibbor
That's looking pretty good mate - I like it! I already have some ideas on how to fix the flicker - for the majority of the time anyway. Rendering the image as a bitmap in the background and then just drawing that should hopefully work like a double buffer or something. Also, only invalidating the relevant part of the screen instead of all of it should make a difference too. It worked for my other application anyway.
I'll try and have a play with it this week and send you an update
Click to expand...
Click to collapse
Sounds great! Made a few more changes but haven't got the latest source available here at work. I'll see if I can get time to upload it later. Otherwise it doesn't matter too much.
I reacted at the code where the grid updates, but have too less experience with WM6 and .NET to actually optimize this to a grade where we'll have no flicker at all. So with other words: I'm looking forward to your anti-flicker code !

I should finally have some time to look at this at the weekend so if you have an updated version can you post it on here?

Swoop2 said:
I should finally have some time to look at this at the weekend so if you have an updated version can you post it on here?
Click to expand...
Click to collapse
Hi again mate! Good to hear. Sadly I haven't been able to get too much done since last time, but I'll attach the current source now.
Thought about the rotation and how to create it. Had an idea where you could destroy the current piece when rotating, and creating a new - rotated - piece at the given location. You got any ideas about it otherwise?

I've been looking for a decent Tetris game for Diamond/TP myself.
Question: are you planning on implementing the scrollwheel to move the pieces? I think that would be a nice touch.
Good luck on this. I'll donate to the cause when you guys have something.

hefman said:
I've been looking for a decent Tetris game for Diamond/TP myself.
Question: are you planning on implementing the scrollwheel to move the pieces? I think that would be a nice touch.
Good luck on this. I'll donate to the cause when you guys have something.
Click to expand...
Click to collapse
The requested function is already supported We'll make sure to setup donations when we're ready

this is definately a worth while project, i wasted my time for about 3 hours looking for a nice tetris game 4-5 days ago and came up with very nasty looking basic tetris clones.
which all sucked, id donate £5-7 just for saving me the time!!
thanks

CDMA Tetris
I am so all about Tetris.
I also spent some time looking for some decent versions of Tetris but they all flopped.
I cannot wait till you guys complete this.

Under Dev - CAD application for Android

My team has been vigorously working on a CAD application for android. I will post some screenshots of the tool if anyone is interested, so please let me know.
It's currently being tested and developed using a Motorola Droid running 2.0.1. Although we can run the emulator and test different screens using it, we find great difficulty in knowing if the "feel" is nice on a smaller screen.
Anyway - current features that are working:
Objects: Line, Circle, Ellipse, Rectangle, 3 Point Arcs, Text Areas
Drawing Modes: Orthographic (including 45s), Grid On Off, Snap Mode On Off (Endpoints, Centerpoints, Midpoints, Quadrants)
Other Things: Undo, Redo, Erase, Modify (reshape & move), Pan, Layering System, Linetypes, Colors & Text Sizes.
In The Works: Zoom (Option for Pinch), Configurable Toolbar (Add/Remove Tools), Export to DXF & Linetypes.
We are looking for a few people that would be willing to get in on a "PRIVATE Beta" to assist us with the continued development. We have our day jobs, so this is a project that when we have time to work on, we do. However, we do spent quite a bit of time working on it .
Anyway - We want to be picky about the testers, simply because we need to have a nice round group of people. Not plumpy, just round. We need a couple guys that are good with input, finding problems, etc. And we also need a few that dont know anything about CAD and can help us to see if the average joe can figure it out.
We also need a couple good mathmeticians or programmers. Or even one would do. We are having some trouble computing certain boundaries (ellipses to be more precise) that we need to understand so that we can build in other commands like Trim or Extend. (Plus our select option on ellipses is a bit hokey, but knowing how to find an ellipse will solve that for us)
For now, the only assistance I can give you is through the board here, and help you get started. The tutorial will come soon, once we get the basics figured out as to how we want to make it really work.
Anyway - To make a long story even longer - let me know if you might be interested. I would be more than happy to post some screenshots if you like of its current state. So let me know if you are interested.
Thank you very much for sticking through the long a$$ read, or even for skipping through to the "thanks" is enough for me.
That being said - LMK! Thanks!

A capacitive touch screen doesn't seem a good candidate for controlling a smooth CAD experience. However on second thought, when coupling together this technology with a trackball, the possibilities really open up. Harness these well and I know you'll be onto something here.
Post some screens to show everyone the progress of your development and I'll let you know if I'd be interested in testing.
Cheers

Well if your looking for anyone with CAD knowledge, I have a degree in engineering with CAD, and Pro Engineer. I don't have much time to devote to beta testing, but I do have time every now and then. I run a ION with 1.6. Good luck on your software!

(Unfortunately - my account has not been enabled for posting outside links or images - so this is the best i can do for you until that is enabled)
talon-designs.net/android/andcad/11.jpg
Above is a screen shot with a couple drawn elements, and the right side of the toolbar tools.
talon-designs.net/android/andcad/09.jpg
Above is a screen shot with a couple drawn elements, and the left side of the toolbar tools.
There are a handful of more screenshots posted up on my site, the links are as follows:
talon-designs.net/android/andcad/01.jpg - Layer select screen
talon-designs.net/android/andcad/02.jpg - File Operations
talon-designs.net/android/andcad/03.jpg - Display Settings
talon-designs.net/android/andcad/04.jpg - Samle Help Screen (Line)
talon-designs.net/android/andcad/05.jpg - Snap Settings
talon-designs.net/android/andcad/06.jpg - Color Picker
talon-designs.net/android/andcad/07.jpg - Snapping to Midpoint
talon-designs.net/android/andcad/08.jpg - Selection of Ellipse
talon-designs.net/android/andcad/10.jpg - Text Input Screen
That should be plenty of screens to keep interest.
@Lancealot - Thank you very much, and I completely agree, that when we started this, there was some doubt as to how precise you could actually be using a "touch based" screen. The good news, through playing with it, and given ability to set tolerances based on the size of your "touch area" as well as snapping options, we found that you can actually be quite precise.
Ill fiddle with it a little today, put together a drawing and give you a nice example of something that can be made with this.
Keep in mind, this is a work in progress, and although much of the functionality that is currently built into the tool, is at a "finished" state, there is certainly room for input and comments from others that may find use in this tool.
Anyway - here are the screenshots as promised, let me know if you have any further questions.
(Again - sorry about the inconvenience on the links)
(edit to update image types to jpg instead of png)

@zul8er - we are certainly interested in your input. Check out the screenshots and let me know if you are still interested. We dont need a huge commitment, but anything that you might be able to provide would certainly be a big help.
Android 1.6 is the minimum OS currently supported. We need to do some work on the graphics to go as far back as 1.5 to compensate for screen size, and we intend on doing so.. Just not at this current time.

I would be interested in trying out your CAD program. I've been doing CAD for ove 10 years now, started with AutoCAD but have been using Solidworks for the last 8 years.
In addition to using the touch screen for input, will you be able to enter X and Y coordinates using a keyboard or virtual keyboard?
What format will it save the files? DXF, JPG, or what?

Noob Squared said:
I would be interested in trying out your CAD program. I've been doing CAD for ove 10 years now, started with AutoCAD but have been using Solidworks for the last 8 years
Click to expand...
Click to collapse
Seems there are more and more of us creeping out of the woodwork on a daily basis
Noob Squared said:
What format will it save the files? DXF, JPG, or what?
Click to expand...
Click to collapse
Currently the file format is a proprietary format. But we are currently (today actually) working on saving out to a DXF format to be able to reload your files into AutoCAD or other supported softwares.
The ability to import is also in the works, but will require some massaging on the users end to make sure the DXF file is not binary etc. (MTEXT may not be supported either)
Noob Squared said:
In addition to using the touch screen for input, will you be able to enter X and Y coordinates using a keyboard or virtual keyboard?
Click to expand...
Click to collapse
We have toyed with the idea of being able to put in specific dimensions on objects, and also work with x/y coords, but at this time, it only supports point to point drawing. We arent completely sure if we intend on building a "FULL ON CAD" application, or an application for people to use to simply get an idea of what they need to do for a job. The other key, is to keep the application at a price range that is reasonable for people. Most "PocketCAD" applications run around 50 bucks a copy - and rightfully so. To keep the tool at a reasonable range (below 10 or 15 dollars) it may need to be a bit lighter weight than those. Most people cringe at a 2.99 app..
IF we could devote our time 100% i am sure we could build a really nice full blown cad app Unfortunately as with most of us, the day job prohibits some of that time.
Its a WIP I'll put you on the list. Thanks for the input.

Are you looking for beta testers?
Hi, are you looking for beta testers. I'm a long year CAD user, and I'm sure I can help with the app development.
[email protected]
Have you tried using some of the java based cad software as a source for your project? There are many and some might be open source.
http://sourceforge.net/projects/ycad/

Yeah I am still interested. It will be neat to play with and see how it works. The coordinate input is a good idea, also, ever play with Pro Engineer? They have a cool way of building an initial drawing. You just sketch, regen, and then input your dimensions to make the object to your liking. Makes things a lot faster and easier to edit a shape if changes need to occur.
I dont know how in depth you want to go, or if that idea can be used.
My email is [email protected]

Nice
Give me a couple more days to get a good product out for you guys to test. Currently we are cleaning up a few little "we'll get that later" issues, and should be good to go by mid/late next week.
Thanks for providing the contact info, I will shoot you a message through email shortly.
Thanks agian for the interest.
@zul8er: nice. Look forward to hearing how you like the feel of it. I havent had a chance to play with ProE, as AutoCAD has been my forte for the last couple decades. Ill see if i can any kind of demo for ProE, and get an idea of how it works. Who knows Anything to make it easier for everyone is a good thing.
But yah - the indepth thing is the issue. We keep tossing with ideas and putting them "on the list" in case people start asking for them. I guess it just depends on how people really want to use this tool. (and of course, how much time we can continue to devote to it) - bah i hate day jobs

I enjoyed the screen shots that were posted. Any idea whether you guys will support rendering/raycasting, or physics with inverse kinematics? Either way it looks great; Sign me up!

haha Not sure if we are going to go the IK way. Maybe as a different project, something more suited to 3D, but for this app, we are only intending on running the 2D route.
My lack of knowledge about the OpenGL portion, really limits us with regards to 3D implementation. I spent a good 3 days just trying to get ahold of loading in a 3D model.. Still never got there (or would have probably released a 3D model viewer first).
At any rate, its hard to say where this will go. It mostly depends on the overall interest i suppose. Its certain that the sky would be the limit, if time were as available as the sky
But cool.. Glad I was able to keep your interest.
Currently (as I type even) I am finishing up all of the help documentation for the app, the inline tutorial, and what not.. A couple more days on the file handling (DXF in particular) and should be set to go for a BETA run. ('couple more days' - like we all havent heard enough of that)
@lancelot - can you send me your email address via private message? That way I can do the BETA communications through there (link to files etc). You are welcome to email me as well:
support AT talon-designs.net
cheers!

Hey, I'm a high school student that has just started learning CAD, does that count as average Joe? I'd love to help beta test, I really want android to overpower iPhone 3.0 lol. My e-mail is [email protected] I use g1 with cyanogenmod 1.6...so idk if that qualifies. But anyways, Good luck!

This really sounds promising. In the last few weeks, I really had the need for a good drawing software on my mobile device. But my Tytn II lacks of power. As I soon will get the Desire, I will hopefully have a quite powerful device for all day use (my Tytn II really sux atm). And because I have the re-occurring need of a drawing app, this could be it.
I mean I don't need it for simple drawing, but for constructing things CAD style and on the go Graphics of furniture or something with measures and all that stuff.

Hey guys.. just wanted to pass you an update on status (which is so much more than I seem to be getting from Verizon on the 2.1 update).
Small rant, but its done now.
Ok - status..
DXF Export is working now, supporting layers, linetypes, colors, and elements throughout the drawing. Am having some issues with getting ellipses to export via DXF (and im not alone - faulty specs are at fault), and that combined with the other issues regarding the math behind finding ellipse edges, we decided to comment out the ellipse alltogether for now. Not that it wont be back, but having so many rules with "you can do this to anything - except an ellipse" left us with no other choice.
It's coming back, just not right now.
We have saving and opening completed (simple proprietary ascii format, but it works for what we need it to do).
Zoom is currently partially working (difficult to complete the recalculation on the elements, but its really close) touch events for zoom are coming up as well. Maybe a pinch zoom even, considering that all devices are getting the 2.0+ upgrade - but we will see.. We dont want to keep anyone excluded from being able to use the tool.
@Balrog82 - we have definately taken this tool a long way since its initial conception. We hope to be able to bring more features that are more "CAD Specific" to the application, and will if it becomes a tool that gets used. We want to release it initially as a "basic" drafting tool, and see what kind of input we get. If we see that a lot of people are using it, and would like the ability to put in dimensions the same way that cad does (within limits) we will certainly look into it.
That being said - I hope the tool is still something you would be willing to try out. I find a lot of enjoyment with working with a tool at its early conception (started using paint shop pro at version 1.42) and now its on to version 14 or something and owned by corel. I just kinda get into that sort of thing, and hope that you all will do.
Good thing is, we hope its a draw to the tool, we plan on releasing it at the market both as a free version (no saving abilities) and a full version at a low price. As the tool grows, the price may increase a bit.. Keeping of course the original buyers at a place that they can keep updating the software at no cost to them. We think that will help the advancement and development of the tool quite a bit.
Anyway - It is right around the corner for initial testing. Please to all interested - send me a PM with your contact information (just an email would be great) I am going to see if i can start a private discussion here to invite you all to as well.
@Lancealot - i got your PM.. Am very happy that you are interested in helping. Expect to hear from me again soon..

Until we can see a working model of this app, I thought I would throw out an app that has some great drawing capabilities. The paid was is called "Picso" by Tiki Move, but I used the free version to try out; it's called "Picso Lite".
It's not a CAD app, but it's different from the other Paint apps on Android in that it has tools the other ones don't. It has the usual tools a CAD user would need, such as Rectangles/Squares, Circles/Ellipses, and Lines. You can change the colors and widths of these entities.
What I like about your program is that it has snaps, and the tools are on the bottom of the screen so they are easy to get to: /talon-designs.net/android/andcad/07.jpg
A feature Picso needs is a Zoom tool so you can zoom in to an area and draw whatever you need to and then be able to zoom full screen. It also needs a text tool. Since there is no dimension tool, you could put a text for the dimension.
P.S.,
I want to try your app, but I am only posting this to show how someone else has put these tools on their app and also to have a comparison on ease-of-use. One other thought, you mentioned the files your CAD app will create will be proprietary file types. Will you be able to save-as .jpg or .png so you can email or text-message a sketch to someone? That way if your on-site you will be able to send someone back at the office whatever it is to explain your ideas, and also they would not have to have an Android phone to view it.

Idea sounds great. Good luck with it!

Sorry for being away for so long.. but we had something going on that we had to attend to..
http://developer.att.com/developer/index.jsp?page=event&id=6.3_v1_9700324
More news as it allows.

Android Category Winner
Talon Designs, AndCAD
This application allows users to create simple geometric shapes, combined with notes, to describe plans associated with the art, architecture, engineering and manufacturing industries. Many of the tools familiar to CAD users are incorporated into this utility, meaning that fluent CAD users will feel right at home using this tool. However, the interface for this tool is simple enough for even the most novices of users to understand. This enables certain users (Contractors, etc) to be able to take notes while on a job site and associate them with vector elements within the drawing.

talondesigns said:
Sorry for being away for so long.. but we had something going on that we had to attend to..
More news as it allows.
Click to expand...
Click to collapse
AT&T Open Call-Apps for All! Contest
Thank you to all the participants in the 2010 AT&T Open Call—Apps For All! Contest. This year's contest was filled with many great entries. AT&T reviewed over 90 applications this year ranging from games to business applications. The winners from each category will receive $10,000 and co-marketing opportunities with AT&T.
Click to expand...
Click to collapse
Did you get $10,000?

[Q] FPSE newbie has assortment of thoughts/questions

Hey guys, I bought FPSE within the first day of getting my Xperia Play. The thing is an emulator machine and FPSE is a fitting addition. Love it so far. Few questions/problems:
1) My phone is unrooted/stock. It seems enabling the g sensor involves editing .ini files and such? Is it possible for me to do without compromising my warranty? Could you provide a link/video that explains how to do it on one of the more recent versions of FPSE?
2) What is the deal with the options for touchscreen analog and "Swipe" analog? I've only tried with Medal of Honor Underground but they're EXTREMELY hard to use. They take a strong push to get started moving, then JUMP in the direction you''re holding extremely fast, making aiming very very hard. Is this the norm with these options? Is it difficult to emulate the analog sticks of playstation?
3)Both of the above questions have to do with shooting games on FPSE. What settings do you guys use for first person shooting games? especially on xperia? I'm starting to think I should just give up on the genre for use with FPSE. (I'm not going to harp on the touch-stick support for xperia play like most, I understand thats probably really annoying to incorporate, especially with Verizon users STUCK in 2.3.2!!)
4) For PS ISOs with the "track 1" and "track2" parts, what do I do?? SF Alpha 3 has those components and I'm not sure what to do/how to rename it so it will work (with just track 1 it boots up like ps one boot screen, then black)
5) I found a SF Alpha 3 that only is one .bin file, but it runs SOO slow on FPSE, no matter what system/video options i tinker with. Does anyone have a definite rom/config for SF Alpha 3 on FPSE that they could tell me? Its one of my favorite games for PsONE.
Thanks in advance for anyone who answers any of my questions/thoughts

I can't answer everything, but I'll tell you all I know
1. I've tried the G sensor on FPSE once or twice and it worked fine without having to change any .ini settings. Can you tell me exactly what you did and I'll try to replicate this
2/3. I've only used the d-pad for movement in FPS games. without the touch pad supprt I stay away from them in FPSE. I do wish there was a way to impliment the analogue sticks better without touching the screen, but till then my advice would be to stay away.
Others on here may know of a better way to emulate them
4/5. We don't like any kind of warez/downloading. My advice would be to buy a disk and rip it to get a true legal copy of the game to play on FPSE. This should also miss out any anomolies. For anything else, it would be worth going on their own forums and asking about specifics of game support.
IMO (educated guess) I think the files need to be in one file format. So when you rip the file, rip it into one iso, this should put all files on the disc into a single file, as the iso is an image of the disc
Hope that helps, let me know how you get on - especially with the touch pads/analogue sticks