Does anyone know what the AT&T GRPS settings for this phone are? I have an unlocked 8125, and can't get the MMS messages to download or connect to the internet via GPRS.
I had the same problem when i first got my 8125. After searching around the Cingular site I found a support page for the SX66. I followed the instructions on how to set up GPRS and everything worked fine.
8125 ATT MMS settings
This what you're looking for? Thank Bullshark...
"To configure the edge I changed "My ISP" Connection Settings. Edit "My ISP"
and in the "Access point name:" change it to "proxy" and leave the rest default. That's it Smile
When I want to use the edge I change my Network Management to "My ISP" from "My Work Network"."
How bout settings for tmobile usa
Does anyone know of a site where I can get the settings for tmobile. I have an unlocked 8125 and voice and txt work just fine, but the tmobile site doesnt have info for the MDA which is their version. I was wanting to know if I could take my phone to a store and get it flashed or am I going to have to wait for their cust to walk me thru programming the settings. Any info would be most appreciated.
Related
Hi,
Does anyone have or know where I can get a hold of this file. I flashed my Vario with the K-Jam Rom and now can't connect to the network.
Thanks
Did You mean Can't make calls?
Or internet?
Here are the T-Mobile US Settings, which is what I assume you're looking for.
Jon.
Thanks for the file. I programed in the internet settings myself, and although it was slow, it finally connected to T-Mobile for voice calls.
Cheers,
dadarkmcse said:
Here are the T-Mobile US Settings, which is what I assume you're looking for.
Jon.
Click to expand...
Click to collapse
Jon - you rock. I thought I was about to spend too much additional money for a frinkin' cab file. got mms and gprs to work. now if I can just figure out how to set up email and get a wireless lan bug i have.
On the wireless side - I can get it to connect to my wireless router - but I cannot get it to browse the web via pocket IE. Any thoughts out there?
Justin Hoss (JHo)
If you are using T-Zones service you can't get IE to work straight off as they have disabled port 80 and you can only go through the T-Zones proxy. It's a pain - the way around is go into T-zones (wap.myvoicestream.com) and use the options in the menu there to get to the web pages you want - I set up the ones I use as T-Zones bookmarks. I have a feeling if you pay for the 19.99 monthly internet service you can use the IE straight but havent tried that yet
Ok, maybe a stupid question, but what does this file really do?
I had Internet service working ok with the plain jane qtek 9100 rom after making an account and poking in the right GPRS gateway, and voice calls worked as soon as I put in the sim. Text and MMS seemed fine too (at least until I upgraded to the new qtek rom - but that's another thread).
So I'm sure I'm missing something, but what actually is in the CAB?
JoninLA said:
If you are using T-Zones service you can't get IE to work straight off as they have disabled port 80 and you can only go through the T-Zones proxy. It's a pain - the way around is go into T-zones (wap.myvoicestream.com) and use the options in the menu there to get to the web pages you want - I set up the ones I use as T-Zones bookmarks. I have a feeling if you pay for the 19.99 monthly internet service you can use the IE straight but havent tried that yet
Click to expand...
Click to collapse
I am not sure I understand the approach you are giving - if I want to leverage my current ISP provider and my wireless LAN connection on my K-JAM - I have to do what? What seems to be happening is I can connect to my WLAN at home - get an IP address, good signal, etc - however - when I try to go to Google or something - is says "Locating" but never connects. I messed around with the proxy setting for T-Mobile and actually turned them off - and was able to connect through my WLAN (not GPRS) - however, that screwed up my WAP setting and now I can't ge into wap.myvoicestream.com (of course). Anybody have the manual settings for the T-mobile proxy they can share? I tried reloading the T-mobile .cab file - but it errors out.
Don't you think there should be a way to use your WLAN (which I already pay for and does not cost T-Mobile any $$) and GPRS t-zones (which I already pay T-Mobile for)?
thanks works great
settings, setup? Please help!
Please help!
I installed the file, nothing seems to be changed. All the connection settings dissapeared from setup. when I go to IE, web page, right away gives me an arror message, "can't connect". before it was "loading" and it was like forever..
May be I should put in the settings manually?
Is there a detail how?
I have WM6.1 (TMobile, internet service active on the plan)
I spent hours calling tmobile tech support,, - 0!
PLEASE GIVE AN ADVICE!
Thanks a lot!
Have any of you tried my Tmobile CABs ?
Hi there, I'm about to update my Qtek 9100 to the latest WWE ROM posted last week. Is there anything very important I should know before I do this? I already backed up all my information and files, and I'm currently running on the Cingular US network. I tried searching for the official Cingular 8125 ROM but wasn't able to find it. I really, REALLY want to have the exact same settings as the 8125 does for connecting to the internet so I get full speed EDGE and the best phone signal it can offer. Could anybody please tell me how to set up my Qtek so it's exactly the same, including the E icon when I'm in an EDGE-covered area? I did a search for everything, but all I managed to find were a bunch of posts where everybody knew what everybody else was talking about. I managed to find the cab file named "Signed_Edge_Icon.sa" but I honestly have no idea what to do with it. As I said, I'm completely new to this, and I just want my Qtek 9100 to perform the best it possible can on Cingular's network. Thank you so much!
Cingular Settings
Hi,
Cingular has a blow by blow description of the settings.
https://onlinecare.cingular.com/dev...ingular.atgnow.com/cng/tutorials/KB56475.html
are the internet settings
.... and .....
https://onlinecare.cingular.com/dev...ingular.atgnow.com/cng/tutorials/KB56044.html
are the MMS settings
And for the cab file, just use activesync (press the explore icon) to drag the cab file to you phone and then tap it to run it.
Cool, I got that cab installed, but I'm having trouble with those Cingular settings... I don't have a "Set up Proxy Server" option under the first My ISP list. I do have it under My Work Network, but to my understanding that is a completely different connection option. Is it okay to have the wap.cingular connection under My ISP and the proxy server information under My Work Network, or should I just put everything under My Work Network and leave My ISP alone?
Through my experience the proxy settings for Cingular do two things (one good one bad) and your decision to use them should be based on which is more necessary to you.
1. The proxy settings allow you to use the MEdia Net homepage at device.home
2. The proxy settings screw with your WIFI connection and cause timeout errors and such when attempting to browse at home.
I personally find that the MEdia Net homepage is nice, but I can live without it or even replace it with other things like google.com/ig.
If you want to enable the proxy settings on the My ISP panel go to the advanced tab and create a new profile where My ISP is. For some reason the new one will allow you to put in proxy settings, but the default My ISP won't.
Hello everyone, i'm newbie here. I just bought a xda exec and i want to sign up for T-Mobile Total Internet in USA for GPRS service. I wonder if anybody has done it and how was it? How fast is it because as I contacted their customer service, they said they don't know anything about xda exec settings.
Thanks advanced for any reply.
Simple..
1) Make sure its unlocked
2) Get SIM card from T-mobile and insert
3) For intetnet go to Settings and then Connections
4) Under "My ISP" click "Add a new modem connection"
5) Name connection T-mobile
6) In the type of connection detail use "Cellular Line (GPRS, 3G)"
7) Access point will be - wap.voicestream.com
8) Click next, then click finish. Do not need the set any advanced settings or Passwords or login.
Just posted this on my MDA PRO with the newest DOPOD ROM
Connections are good, but othside the metro areas I havent had much luck WiFi works great.
7) Access point will be - wap.voicestream.com
----> T-Mobile offers 2 different data plans: if you go with the cheap one, named T-Mobile Web, you get access to the wap sites only, and you will be using the wap.voicestream.com access point.
If you go with the second plan (a lot more expensive) named Total Internet, you will hit the internet, and you will use the access point internet2.voicestream.com
Most people can hit most of the www by simply subscribing to the T-Mobile Web (the wap plan) and then configure the following proxy in the connection settings:
HTTP proxy: getmorespeed.voicestream.com port 8080.
Interesting.. since I have teh big plan.. will see how the other settigns work for me.
thanks,
Thanks for the reply, I think im gonna go with the big one since I use the T-Mobile Hot Spot too. Thanks so much though...
I tried the settings as you describe but my browser (IE) still returns an error stating that the page could not be located. I've been playing around with my Exec for 2 days now since it arrived and have yet to get this to work. Thanks in advance because I know you guys have alot of experience.
Dre
Thanks for all the information, my exeec is still on his way so I haven't really tried anything out yet. But one more question if someone could help, will I be able to access to free email services such as hotmail, yahoo mail? because my understanding is if you use the cheap plan one, you can browsing the websites but not be able to send/receive emails. Thanks,
hey
I use this already just use wap.voicestream.com. It doesn't matter the diffrences are one you have a public address and the other you have a private address. Everything works through wap.voicestream.com. Don't put the proxy settings in just the gprs
Hello, i tried searching and found a few threads similar to mine, but not exact so im hoping you can help. I did the firmware upgrade for ATT and now when i use internet explorer everything gets compressed (images and what not) I hate it =(. It says everything is set to go through media net so im guessing that is what is screwing it up. I tried setting it to My ISP but i cant get any www, it does work for POP3 and tethering with my laptop, however. So whats my best bet? Will another web browser work or do i need to set it up diffrent? I tried looking around in IE to disable the proxy but couldnt find anything. Thanks so much for any help!
I have the 39.99 pda unlimited plan on the att 8525
Try doing the following: Click on the Start menu -> Settings -> Connections Tab -> Connections -> Under the Tasks, click on "Set up my proxy server"
As to what it should say in there, that I can't really help you with since I've got the ATT Blue sim card for my line. However, you should be able to find the Cingular settings (along with a cab file to place those settings on your phone) in one of the threads in here.
Good Luck hamwbone.
well i go there and there is nothing in the box. the only thing that is checked is *this network connects to the internet* medianet is set to wap.cingular and my isp is set to isp.cingular
I looked on this page http://wiki.xda-developers.com/index.php?pagename=Hermes_provider_cabs but it does not have the provider info for AT&T (mMode)
I am not sure how to create one but I think it would be something nice to have so if someone knows how this is just a request if it's not too much trouble to make.
Thanks
Here ya go.... Works for ATT as everyone says on this board... SEARCH THE FORUMS
I don't have MediaNET, I have Pre-at&t, Pre-Cingular, AT&T Wireless mMode.
Are you telling me I can use the MediaNET settings?
AFAIK I have to use "proxy" for my AP name and use some other IP's as well to be able to use mMode.
IE this config - http://forums.wireless.att.com/cng/board/message?board.id=cingular&thread.id=38077
I just don't know how to make a .cab to auto set this up every time I hard reset or change my rom.
I would like to bump this up, can anybody out there create a at&t blue mmode settings cab?
You really don't need a cab. Just add a new new modem connection to "my ISP" in the settings-connections tab. Name it whatever (does not matter), choose "cellular line, gprs" from the pull down, then click next. Access point name is "proxy" and click next/finish. Nothing else needs to be done. Don't need "WAP settings", http addresses or anything else. I flash my trinity constantly and this is all I ever do.
so you don't need to put in the 10.250.250.54 connection strings for mmode and mmode mms? it gets annoying re-entering all that data just to have it gone again everytime some new hot rom comes out that i got to have.
i'd write a cab myself if i knew how.
yup like the post above yours says, all you need is to make a new connection that connects to "proxy" and your done for the mMode connection.
For the MMS the only two things you need to know are;
10.250.250.55:8080
http://mmsc.mymmode.com
Then you select the connection you made under connections and your done.
EDIT:
btw, are you in a 3G network area and is your service working?
No problems with 3G, including "H" and I am still using my original blue ATT sim from yrs ago.
Do you mind if I ask where your located?
I am really getting sick of being jerked arround!
http://forums.wireless.att.com/cng/board/message?board.id=cingular&thread.id=55356
http://forums.wireless.att.com/cng/board/message?board.id=mmode&thread.id=13039
I can't get any help or response either!
DH, I'm in DC & live in MD, no problems in either of those areas.
With regard to settings, have you tried another browser? Running WM6 and using IE with the above settings never works but switching to opera solves the connection issues more often than not.
BTW I’m in the DC (Mont. Fred. And Washington county) area as well if it matters.
Hi...I got my mmode data settings to work according to your suggestion...but can't get the mms to download. I've got the old blue sim card...any suggestions for getting the MMS to work along with the data? It connects...retrieves message headers, i know who the messages are from...can even get subjects...but all the messages just hang at 0%??