Hi,
Have anyone try that combination ?
Address phonebook synchronization ? Is it working ?
Any Echo problems ?
I bought the 3400GPS for the girlfriend, same device but with GPS, it works very well, only downside is you have to manually push the contacts to the Parrot one by one.. She is running the latest O2 ROM without any BT Caller ID Software installed, the GPS hardware on the 3400 works extremely well with TomTom..
tonyb15re said:
I bought the 3400GPS for the girlfriend, same device but with GPS, it works very well, only downside is you have to manually push the contacts to the Parrot one by one.. She is running the latest O2 ROM without any BT Caller ID Software installed, the GPS hardware on the 3400 works extremely well with TomTom..
Click to expand...
Click to collapse
Thank you very much. Cant you not dail from the ppc using voice dial?
If photos are stored and sent with your phone contacts, they can be displayed on the screen. Is this working ?
I believe you can use the voicedial, its something I havent tried but you can assign voicedial to the parrot contacts once you have cross transferred them.
tonyb15re said:
I believe you can use the voicedial, its something I havent tried but you can assign voicedial to the parrot contacts once you have cross transferred them.
Click to expand...
Click to collapse
How do you transfer the contacts? Is it done automaticaly?
How abou the caller ID picture? this sync as well?
Is there a power connector that goes into your cigaret ligher place for the Parrot?
you send the contacts and photos one by one from the phone.
The Parrot is hard wired into the car either through the ISO connector of the stereo or some other cable.
tonyb15re said:
you send the contacts and photos one by one from the phone.
The Parrot is hard wired into the car either through the ISO connector of the stereo or some other cable.
Click to expand...
Click to collapse
Thank you!
Is there an echo when speaking? how about the other side ?
One more question!
DO you actualy see the name and number of the caller or only the number ?
because the contact is in the Parrot then you see the number and photo on the parrot, its only using the phone for the connection out, incoming is identified by number then cross referenced with the parrot list.
Theres no echo at all.. thats from exec to exec with parrot.
http://www.parrot.biz/guide_chm/CK3X00/jasjar/2_b.htm
Hi Tonyb15re, I was wondering if you can confirm the following about the 3400 ls - gps parrot kit, when installed via iso connection or specialist cable if required can you do the following?
1. Run tomtom software and windows media for music playback simultaneously? (tomtom muted)
2 Run tomtom software and make/receive phone calls simultaneously??
3.Run tomtom software, windows media and make/receive phone calls simultaneously - obviously win media would need to pause and tomtom would shut up while call in progress????
Many Thanks for your answer
Phil
Related
Hello every1
find this site with a great software that give extra features to you bluetooth handsfree.
I've tryed it on the Qtek 9000 and it work very well on the Parrot LS3400.
This is the site:
http://www.jetwaremobile.com/index.htm
Hope this is usefull to someone.
Ciao
Gigino
I tried this today on my K-Jam with my Parrot 3100. The only thing it gave me is my battery and signal strenght on the Parrot screen. Is there anything else?
Dead Bluetooth Button
I installed this software, and immediately, the "send" button on my bluetooth headset stopped working (it would accept a call, but won't kick off Voice Command anymore).
Anyone have an idea of what registry setting I can make to repair this?
spartanrob said:
I tried this today on my K-Jam with my Parrot 3100. The only thing it gave me is my battery and signal strenght on the Parrot screen. Is there anything else?
Click to expand...
Click to collapse
I see my provider too.
Also works well on my K-Jam & Parrot CK3300 in that it gives signal strength etc.
Has anyone who is using a Parrot CK3*** been able to get their wizard to connect automatically to the Parrot.
Either I have to connect manually or wait to make or receive a call before it connects & gives me the connected display with signal etc?
cdsh said:
Has anyone who is using a Parrot CK3*** been able to get their wizard to connect automatically to the Parrot.
Either I have to connect manually or wait to make or receive a call before it connects & gives me the connected display with signal etc?
Click to expand...
Click to collapse
Here, but in the beginning i had the same problem.
I have deleted all BT Devices in CK3100.
Then i have reconnectet my Wizard to CK3100 and now it connect
automatic.
cdsh said:
Also works well on my K-Jam & Parrot CK3300 in that it gives signal strength etc.
Has anyone who is using a Parrot CK3*** been able to get their wizard to connect automatically to the Parrot.
Either I have to connect manually or wait to make or receive a call before it connects & gives me the connected display with signal etc?
Click to expand...
Click to collapse
My K-Jam connects automatically everytime.
BongoUser said:
cdsh said:
Has anyone who is using a Parrot CK3*** been able to get their wizard to connect automatically to the Parrot.
Either I have to connect manually or wait to make or receive a call before it connects & gives me the connected display with signal etc?
Click to expand...
Click to collapse
Here, but in the beginning i had the same problem.
I have deleted all BT Devices in CK3100.
Then i have reconnectet my Wizard to CK3100 and now it connect
automatic.
Click to expand...
Click to collapse
Thanks for that. I followed your advice & it nows seems to connect everytime automatically.
cdsh said:
BongoUser said:
cdsh said:
Has anyone who is using a Parrot CK3*** been able to get their wizard to connect automatically to the Parrot.
Either I have to connect manually or wait to make or receive a call before it connects & gives me the connected display with signal etc?
Click to expand...
Click to collapse
Here, but in the beginning i had the same problem.
I have deleted all BT Devices in CK3100.
Then i have reconnectet my Wizard to CK3100 and now it connect
automatic.
Click to expand...
Click to collapse
Thanks for that. I followed your advice & it nows seems to connect everytime automatically.
Click to expand...
Click to collapse
You are welcome
Edit:
CK3x00 connect only automatically to the first connected phone.
If someone install CK3x00 on Car, normaly this person test with any phone, and not with your phone.
BT headset can show the Caller ID Name
I tried this BT extension on my Universal and a Bluetooth Headset SE HBH-662 that has a Caller ID screen. With this BT extension, now the BT headset can show the Caller ID Name IF the contact name and number exists in the SIM card.
However, it will not show any caller name if the contact only exists in Outlook Contacts.
My test also shows, the number stored in the SIM card has to be exactly the same with one sent over by the operator, otherwise it will not show the caller name. Ex. if the operator sends over the caller number as 171xxxxxx and the number stored in the SIM is 71xxxxxxxx then it will not work. Same thing if the number stored in the SIM is +171xxxxxxx and the operator sends the number 1713xxxxxx then it wil not work as well.
I kind of like to use the format +171xxxxxxxx as this is the international format.
Anyway, this is great, as most people have been waiting for this function to work out of their caller ID BT headset. Now, if we can find out how to make it work to access the Outlook Contact, then its perfect...
Hi to all.
Have any of You experience with connecting TyTN to more sophisticated bt carkit. Mine connects perfectly to my simple motorola carkit but does not want to connect to Parrot 3100 at all.
Hi varden,
There are some issues with tytn an parrot CK connection. As it is discussed on this thread, Parrot is aware of the problem and say they are waiting for a tytn unit to test it and solve the problems.
http://www.parrot.biz/forums/english/viewtopic.php?id=2667
Regards.
Do You know of any other working carkit with an LCD and contacts importing?
My Audi BT carkit doesn't work with the TyTN,
It connects and stays connected for about 5 minutes, then it randomly disconnects and reconnects and sometimes just disables the BT on the TyTN :evil:
I have no troubles using my Lexus car kit for making calls, but I cannot for the life of me figure out how to transfer contacts from the TyTN to the car address book
Just tried my Orange SPV M3100 with my Audi A4 BT carkit, and it all appears to work fine so far.
To the Lexus guy, most in built car kits I have come accross have the ability to read the contacts off the SIM card. As this is a standard format, car manufactureres don't have to worry about accessing contacts from Symbian, Windows Mobile, Nokia etc etc etc. With my Audi, the first time it connects via Bluetooth, it reads all the contacts from the SIM card. (Note: if you already have a Bluetooth connection created, you will have to delete it and then re-create it to initiate the SIM download bit).
This maybe different on your Lexus, but the mechanism should be explained in your manuals somewhere. If not, Lexus dealers are reknowed for being very helpful, why not try them!
Markee
CK 3000?
Does anyone have any experience with the TyTN and the simpler CK 3000 kit?
I use my TyTN with a sony ericsson bluetooth car-kit. It works perfect at the moment. I didn't use it much yet, but it works very well. the TyTN connects much faster then my previous Eten M600
Does anybody have the Tytn work with a Lexus Bluetooth carkit?
If yes - is the phonebook transferred to the carkit?
Thank you
TyTN with Parrot RNB
Hello together,
I'm using the MDA Vario II together with a Parrot RNB. Paring, connecting and phone-book synchronising is working quite well. But I have problems with phoning. While synchronising I can't make a call. When I try I don't hear anything (no ring tone and no speech) and my MDA disconnects after some seconds.
After synchronising the phone handling is quite good. I can reach and make calls either with the RNB or with my MDA and the sound quality of my phone partner is very good. The big problem is, that my speech is muted every two seconds for about one second. So my partner has big problems to understand me.
On the RNB I have the latest firmware, which is about one year old and on my MDA I have the ROM Version: 1.21.111.3 and the Radio Version: 1.05.02.00
Does anyone have some hints for me to solve the problems?
Greetings Pudl
Phonebook transfer to Lexus now works
Finally managed to send contacts over to my LS430 from my Hermes (Cingular 8525).
How you ask?
WM6!
It has an updated bluetooth stack that now interoperates properly.
Finally.
@Mandingo,
How did you achieve this, i just picked up my RX350 and i already have WM6 on my Hermes, but i can only send 1 contact at a time to the car, and it's becoming painful, i wish there was some way i could select all contacts and then send via bluetooth?
if you go to http://www.jetwaremobile.com/ you can download their cab file, then install it and you can push all the contacts over in 1 go.
Paul
I have a BMW with bluetooth phone kit (official BMW!) and i couldn't use it with me Symbian phone... Now i have a TyTN and all works great
I stopped using sync on my TyTN with my CK3300. Instead I exported all my contacts from Outlook with the Parrot App, and pushed them over bluetooth to the kit.
You need to select the SonyEricsson K800 NO SYNC when pairing the TyTN so it doesn't sync. The advantages with this is that you can use the dual keyword (name then home/work/mobile) instead of the default sync that just puts all numbers in one long list.
Parrot CK3000
I am using a TyTn with a simply Parrot 3000. It works well. If you have a problem with it, reset the Parrot.
Is there any possible way to repair the BT annoying thing?
I've got a Parrto BT set in my car and the tytn disconnects all the time, when I achieve the connections I cannot transfer my contacts...
Thanks for your help
Hi,
Which model of Parrot car kit is it? I use the CK3100 (the one with the LCD) and it works except for the usual TyTN switching BT off when it disconnects from the Parrot after stopping the car. Sync works fine.
Might also be worth looking in the Parrot forums at http://www.driveblue.com/
Gav.
Parrot
I also have the 3100!!
When I get into the car it doesn't recognize me. I need to go to congiguration and establish the link, the it seems that it starts to sinchronize the agenda but it doesn't!!!
Hi again.
Is there any chance you have the power cables to the Parrot CK3100 the wrong way round? If that is the case then the Parrot CK3100 will forget the pairing to your phone and you will need to re-pair everytime. The easiest way to fix this is to reverse the wires at the fuse.
Basically there are 2 wires on the Parrot Parrot CK3100, one perminent to the battery for saving the memory and the other is the ignition. When the ignition goes to 12v then the Parrot CK3100 powers on and tries to connect to the phones in its pairing memory list (upto 5).
Do you know which firmware is on your Parrot CK3100? The latest is 4.15b > it's under the Advance menu.
Gav.
Don't think so
I don't think so because it worked perfectly well with my Blackberry!
Got my TyTN yesterday (had a Wizard) and so far it works just fine with my CK3100. Syncs nice and fast and connects within 10 seconds. I did install Jetware mobile extender to make the display a little better. Haven't experienced the TyTN turning BT off yet...
Hi Pablete,
Strange. I can only suggest re-pairing and updating the Parrot to the latest firmware rev.
Hi Scott,
What advantage does Jetware mobile extender give?
Gav.
Jetware changes the "network OK" to the real network name, adds signal and battery bars, adds the phone ringtone instead of the Parrot ringtone and several other cool features.
Edit: the URL... http://www.jetwaremobile.com/
problem BT and voice dial
when i push green button on parrot, no voice dialling possible tru speakers?
Any solutions.
If i use (new) voice dial 1.6 (which reads sms) same things happen and additionally when i use dial a number i even can not confirm?
anybody a solution
thanx in advance
re960088 said:
when i push green button on parrot, no voice dialling possible tru speakers?
Any solutions.
If i use (new) voice dial 1.6 (which reads sms) same things happen and additionally when i use dial a number i even can not confirm?
anybody a solution
thanx in advance
Click to expand...
Click to collapse
Not completely sure I understand the question? If you meant to ask if it is possible to do voice dialing in the carkit instead of the phone then head to the voice commands menu, and in the bottom you'll find an option to change where voice commands are processed; carkit or phone.
i meant when i push the parrot green button the application voice dialer switches on on my TYTN, but no beep can be heared tru the car speakers?
with the newest cyberon voice dialler i can not confirm or redial, even if used outside the car?
Any suggestions
ive searched for ck-7w in the hermes section but finds nothing? surely others must use this handsfree kit?
Well my issues, my hermes wont find it when searching for bluetooth devises? Never had any issues with my wizzard?
ive tryed a few different wm6 roms, now on the black.
Is there a cab somewhere to fix this, as i cant, use this phone until i get it sorted with my car kit
Hi fil,
I can't speak to WM6 but my 7W works well (usually) with my 8525 WM5 ATT Upgrade Rom. I remapped the ptt button to activate the built-in voice dialing. Sometimes the system announces the name throught the 7w speaker, other time via the 8525 speaker. Who knows why?
The quality of the recognition software is fair. I am planning on re-recording some of the voice tags in the car via the 7w mic. I have a feeling this will result in greater accuracy. It has to do the the acoustics where the tags are recorded.
My BT settings in the 8525 are
Mode = Turn on BT and Make device visable
Devices = add new device, if it finds it, click on Nokia CK-7w & check off Hands Free, at the bottom of the screen hit Save
BTW, the 7w data cable 5 volt lead does not have enough balls to charge the 8525.
Let me know if you get WM6 working with the 7w.
Lyle
You've already tried to reset the CK-7W ?
Especially when your Nokia Carkit has an other mobile paired in his memory (an old one for example) it won't pair the Tytn.
Worked for me (reset CK-7W).
After that my carkit works fine with yhe Tytn but has proplems if I wan't to pair a second (Symbian) phone.
alylea, my tytn wont even find it, when searching, have ticked the make seeable to othe devices, the method you discribe works perfectly as said on my wizard
davw, reset the ck-7w how?
tho the ck-7w can do up to 7 phones in its memory i belive, had no issues with a wizard and 2 different nokia all paired on it allready?
davw said:
You've already tried to reset the CK-7W ?
Especially when your Nokia Carkit has an other mobile paired in his memory (an old one for example) it won't pair the Tytn.
Worked for me (reset CK-7W).
After that my carkit works fine with yhe Tytn but has proplems if I wan't to pair a second (Symbian) phone.
Click to expand...
Click to collapse
again how'd you reset it? dont have the manual
still aint working, see unable to see the kit!???
anyone?
right its working now?, done nothing different?
was sitting in my car thismorning doing a bluetooth search for my new stereo headset i picked up from the PO on my way to work, it found it and the carkit , and paired with both!
well problem solved, but **** knows how ???
No idea what did the trick but here is the Nokia Europe site for the manual.
http://www.nokia.co.uk/A4222096
So iGuidance voice instructions do not come out of the CK-7W speaker not do the voice dialing confirmation names, although basic HF function works. I'm testing an inexpensive application that routes all audio from the 8525 to the BT output. I'll let you know if it works.
Dear all,
I have a Parrot CK3100 carkit and I am running Bepe's 0.61 WWE and Radio 1.58.25.14.
BT pairing and sync is (more os less) seamless but I found that when I initiate the call with the phone's green button the call goes through the phone's loudspeaker. When I initiate the call with either by clicking on the contact's picture or action button on the name or voice dialing by Parrot everything works fine.
I know that I can turn the Parrot carkit's loudspeaker on by clicking menu->"turn headset on" but it is so dangerous to chek it and activate it while driving.
Is this the expected behaviour? Is this a Radio stack related problem? Anything I could do about making the external speakers work all the time the headset profile is activated? Anyway, it used to work as I expected with the original ROM.
Thanks, Z
zoltansz said:
Is this the expected behaviour?
Click to expand...
Click to collapse
Yes, instead of pushing green button on phone use the call button on Parrot and everything works fine.
Sascha
You mean I've got to search for the contact on the phone or on the Parrot? Because I prefer the phone's T9 dialer. Would it work if I chose the contact on the phone and pressed the green button on Parrot? Will play with that tomorrow.
And once we're talking about Parrots...
I have 1015 contacts to sync. BT sync is okay (I use "Windows CE" when pairing), but quite a few of my numbers do not go to the carkit. (I don't have to tell there are my mom, sister, kids etc. All my customers are on the carkit.) Can I do anything about that? I can send them one by one, but OBEX is not working according to my experiences. It says it was okay, but I cannot find the contact afterwards.
Any idea is highly appreciated. Thanks
Get MS Voice Command, and never browse your phone book again. Trust me its a well worthwhile investment, I can't think of a single person that bought it and regretted it.
Look at this, perhaps it can help.
http://www.jetwaremobile.com/
robjo
zoltansz said:
Would it work if I chose the contact on the phone and pressed the green button on Parrot?
Click to expand...
Click to collapse
Yes, that is precisely what I meant.
sonus said:
Get MS Voice Command, and never browse your phone book again.
Click to expand...
Click to collapse
Doesn't work for me since my car apparently is too noisy (at least while running).
Sascha
As far as the noise is concerned, the trick is that you have to record the names while driving so that noise would be on the records as well. Fortunately, I have a Civic and that makes perfect background noise for this operation
Anyway, I have VC enabled but I am using only to narrate my upcoming appointments while headset profile is on and the calendar is free. Do not use that for dialing or navigating the shell.
zoltansz said:
the trick is that you have to record the names while driving so that noise would be on the records as well
Click to expand...
Click to collapse
Since when do you have to record names in order to use MS voice command?
It's a speech recognition software which is user independant.
Sascha
Hi, as I said, I do not use VC for dialing. I use Parrot for that and I am basically very satisfied with that. The only problem is that, for some peculiar reason, not all my contacts gets sync-ed there.