Bluetooth GPS Connection - 8125, K-JAM, P4300, MDA Vario General

I finally found out that there is a bluetooth patch for Windows Mobile 5 that fixes the problems in connecting a GPS-TMC Mouse 5843 with an o2 XDA Mini / HTC Wizard via Bluetooth.
A can't find it anywhere, do you know where to find this .cab?
Basti

This Bluetooth patch for Windows Mobile 5 and the HTC Wizard should resolve problems for most Bluetooth GPS Mouse Connections, not only for the GPS Mouse described above.
According to a o2 technician it used to be mentioned somewhere here in the forum, but after an hour of search I couldn't find it.

Related

How to activesync with bluetooth?

I have a Sony Vaio which has built in bluetooth. When I pair the XDA2 with it, it can not see any serial profile on the XDA2. Also the BT implementation of Microsoft on the XDA2 does not do much as well. The pairing of the machines from XDA2 gives you the message that it's ready for activesync via bluetooth but that's BS. When you choose activesync via bluetooth from the XDA2, my VAIO shows an instant try of serial connection between the devices but it does not stay there.
The bluetooth implementation on the VAIO is also Microsoft BT stack and it sees the XDA2 as a DUN device, which installs a modem at port 10 to use the XDA2 as a modem. So some part of this works, except the activesync.
Any help would be appreciated.
Also, I have contacted NAVMAN GPS in Europe and they have confirmed that they just sent an XDA2 to New Zealand to their developers to find a solution for the strange pairing problem (NAVMAN GPS only accepts "NAVMAN" as the pairing PIN but you can only enter numbers at the XDA2 pairing software)
I have exactly the same problem as you with my Sony VAIO Z1 SP laptop. I have posted a separate thread but so far no-one has been able to get my bluetooth activesync working. Have you had any luck yet?
No not yet, I've downloaded sony's updates for bluetooth from www.vaio-link.com, but it didn't help the problem. I'll keep on working on this, let me know if you have a solution.
I had a similar problem with a Tosh laptop, but after upgrading to the latest stack was okay. Although I still couldnt configure from the tosh laptop (no serial port recognised), when following the instructions within the bluetooth HOWTO on the o2 website it worked fine
http://www.myxda.com/XdaII/serviceandsupport/template/XdaIIHowToUse.vm
Seems to work okay to other people I've suggested it to as well who were having trouble
kulltogi said:
No not yet, I've downloaded sony's updates for bluetooth from www.vaio-link.com, but it didn't help the problem. I'll keep on working on this, let me know if you have a solution.
Click to expand...
Click to collapse
Uninstall Bluespace NE and use a Widcomm-BT Stack instead. Works fine with my MDA II (Towa Pocket Bluetooth Tools installed) and Sony Vaio PCG-Z1RSP.
You have to edit btwusb.inf before installing the Widcomm-Stack:
[WIDCOMM]
%SONYZ1.DeviceDesc%=BTWUSB, USB\VID_044e&PID_3003 ; SONY VAIO VID&PID
[strings]
SONYZ1.DeviceDesc="Sony VAIO Z1 Bluetooth Device"
How can you download the WidComm stack. Can this stack also be used on a Toshiba Satelite Pro m10. i have troubles with the toshiba bluetooth stack..
mdissel said:
How can you download the WidComm stack. Can this stack also be used on a Toshiba Satelite Pro m10. i have troubles with the toshiba bluetooth stack..
Click to expand...
Click to collapse
Should work if the internal transceiver is also manufactured by Cambridge Silicon Radio (CSR).
For instructions on installing different versions of the WidComm BT-stack,[includig the Dell one] have a look at this forum
http://forum.gsmhosting.com/vbb/forumdisplay.php?f=231
You can also look at this page for a step by step guide (not verified - "never touch a running system"):
http://www.jonscaife.com/
I had problems using activesync via bluetooth with a cheap class 1 dongle (Microtune I think) but managed to get it working by installing the Pocket Bluetooth stuff from the links in other threads (german internet site) and by following the instructions at http://www.jonscaife.com/ and installing the Widcomm stack linked from there (1.4.something I think) rather than the one that came with my dongle (1.3.2.7 I think).
Everything now works a treat - thanks Slartibartfass for the link - saved my hair from being pulled out.
http://bluetooth.i-networx.de/index_e.html
EZ Solution
I just found an easy solution for u guys who using Toshiba Bluetooth Stack ...
U guys no need to remove anything ...
All u need to do is verify the COM port of ur bluetooth ...
1. Go to the “Bluetooth Local COM” Applet in your Control Panel
2.Open “Bluetooth Local COM” applet where you will see a list of Ports
3. The Corerct port you need to use is
“COM7 Toshiba BT Port (COM7) LocalCOM-Server[SerialPort(TOSHIBA LocalCOM)]
and not “COM6 Toshiba BT Port (COM6) LocalCOM-Client”
From this guy here ... << http://thinkabdul.com/2006/10/12/tu...c-via-bluetooth-with-toshiba-bluetooth-stack/ >> TQ sir ...
Then ... u guys need to use ur REGEDIT to find this ...
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows CE Services
Notice there is SerialPort ?? yes ... JUST CHANGE THE string 'Bluetooth' to COM7 ...
After this just pair ur wat ever PDA u've got & thats it ... u got the ACTIVESYNC in the advance option of the services available ...
Hope u guys enjoy !!!

bluetooth modem

hello guys... i'm just confusing
i'm try to connect my xda via bt as a modem ( i use sony erricson phone ) and make the connection as the dial up its working, but not work at xda II ,
i already make the pairing as the dial up cause i always going somewhere with my laptop and xda and connect to the internet via gprs, also i tried at the wi modem of xda through bt connection ...not work....anybody have suggestions..... thanks a lot
The XDA is currently not supporting the modem profile. You can use other device as modem but the XDA it self cannot be used as such via bluetooth.
Regards,
Mark
Hi,
In the following document you can find the answer. (last question)
This is for the qtek 2020 or XDAII with Win XP
Cheers
Somehow I managed to make a connection (pair the evices) but when it comes to establishing what kind of services can happen between the two devices, nothing happens. In the end, I have a connection, the devices show as paired but I can't move files or connect one to the other in any possible way. Any ideas anyone?
Runing ROM 1.66.00WWE
Radio 1.10.00
Protocol 1337.18
Ext ROM 1.66.131
on notebook running
Windos XPhome
Sony USB BT adapter
@MCEITLIN
To what device have you connected?
mark
I paired a vaio V505 tunning XP and my I-mate
Cheers
device
markutah said:
@MCEITLIN
To what device have you connected?
mark
Click to expand...
Click to collapse
i'm using the xda 2 and laptop ibm x 31 with bluetooth install from ibm, u got the answer
Re: device
@MCEITLIN and @benmuliono
If your devices are paired then you can active syn over BT to sync your device and the pass-through to connect to the internet.
Indeed you can't browse the network because the network profile is not supported by the Bluetooth stack used in the XDA.
To be able to browse the network you've to use the WidCom Bluetooth stack and a BT dongle on you PC/Notebook/Laptop whatever which supports the network profile or PAN.
The WidCom bluetooth stack can be found on this forum
Mark

Use internet explorer / MSN over Bluetooth

Dear all,
I've tried almost everything to make a LAN bluetooth network, but no luck so far.
I've paired up my PDA with my PC, but at the end of the wizard I can't select any services, although I have a bluetooth network connection available in 'network connections'.
Is there some driver I need to install first ? I've heard something about 'PAN' for bluetooth wich is necessary for the use of internet over bluetooth ??
Can anyone help me how to do this ??
Oh yeah, I haven't got a XDA based PDA, but a DELL Axim X50v with windows mobile 2005, but i guess this is a general question wich is valid for all types of PDA's ?
Thanks in advance
the ms bluetooth stack dont support PEN
vidcomm does
or you can just connect to activesync then your pda
have the same network access as your pc unless you have
it disabled that is
I've already found the answer. (finally fieuw)
Now I can synchronize AND surf the internet through Bluetooth !!
http://axim.dpicts.com/

Problems connecting O2 XDA Mini S with Bluetooth GPS Mouse

Hi People!
My first message at this board!
I hope you can help me solving the following problem:
I can not establish a Bluetooth connection between the O2 XDA Mini S and the Adapt AD-500 GPS Bluetooth Mouse.
The GPS Receiver is detected by the Wizard but with an "?" in front of its name.
The Bluetooth key is accepted and i made in and outgoing comports but the connection is still not funktioning (no connection recognized by the GPS receiver).
I looked in the WM 5 help on the wizard and it told to do some changes in the settings / gps menue. But there is no gps menue!
Is it because i have no navigation software installed till now? For me it sounds that WM 5 has this gps menue regularly but i can not find it in the settings.
It would be very nice if someone could help me connecting the receiver to my wizard because i dont know how to go on.
Heeelllllpppp!
Kind regards
Carsten

Pairing magician with 3G mobile phone via bluetooth

Hi,
I've a SE K610i and a magician.
As I am using my K610i for 3G service, I was trying to pair it with my magician. Apparently, i can paired both of the device. However, when I'm trying to initiate the dialing from my magician, it doesn't seems to connect to the phone to dial it. Basically I would like to use my PDA to surf with 3G speed (pairing with the mobile phone) and make normal calls with my magician. Would that be possible?
Is there any guide on how to do it? and also, is it because the standard magician bluetooth software does not support it?
Thanks & Regards,
i also have the similar problem when i want to connect my o2 mini to my K810i for internet connection. My O2 mini does not connect to the mobile phone via bluetooth. Connect by Infrared is working fine. Transferring files via bluetooth is working fine too.
My setting did not have any problem because it working fine with my treo 750.
Anyone can help me?
Are there really nobody in o2 mini anymore? OK, for the one that still with the mini. I have found the problem. When pairing O2mini bluetooth with any other phone which you want it to act as a data modem, just click 'NO' when u being ask 'will you want to add a serial port". You should able to dail after this.
If you replace the microsoft bluetooth stack with the Blue Soleil one (available on these forums) you get a hell of a lot more functionality with the bluetooth, it also adds the PAN facility. I have successfully connected my magician to my K800i and my C905 and both will suft the net perfectly well. You can do the same with the broadcom bluetooth stack on your home pc.

Categories

Resources