after updating my jamin with the latest rom the network icon now shows "E" instead of "G" although I dont have EDGE technology and I use GPRS. I successfully made a GPRS connection and after disconnecting it shows "G" for a while then turns back to "E"!!!! anyone experience the same problem!?
this is not a problem. If your network is able to work with Edge, it will appear "E" and than when you connect it will appera "G" (because your device don´t have EDGE). This icon it represents what your network is able to offer.
the problem is; I KNOW THAT MY PROVIDER DOESNT HAVE EDGE!!!
rasmy said:
the problem is; I KNOW THAT MY PROVIDER DOESNT HAVE EDGE!!!
Click to expand...
Click to collapse
who is your provider? as far as i know all providers in the use who is capable of using this phone on thier network is edge capable. outside of the small mom and pops. cingular/tmobile/cellularone are all edge capable.
sorry just read this thread over at hf.
I've had this . It momenterily shows the E and then reverts back to G. I am with Orange UK and I am in a Strong 3G network cell. I know that Orange are suposed to running edge out to areas with no 3G but not sure when.
I can only assume that it is picking up an edge signal from somewhere. To tell you the truth I wish I saw the E all the time . That would at least give me edge speeds .
This is defo a problem (Well doesn't hinder the phone). I was using my Jamin with copilot which was connected the whole time to Copilot Live via a GPRS connection. If I come out of the copilot screen and initiat a call the G symbol changes to an E . It then reverts back to a G when the call finishes.
Maybe your provider is doing some EDGE testing?
Related
i am not aware of this?Or is there a software to enable this ?
yes the wizard works with edge. there is a hack to enable an indicator to show if you are connected to edge or gprs, but edge should work regardless. This indicator can be enabled by using RegistryWizard as well.
Is the registry hack just for the indicator ?
As far as the specs shows Wizard only has GPRS built in,how will u enble EDGE ?Or does it automatically work on EDGE also ?
As far as I know from personal experience and This T-mobile. com page, it is edge out of the box. I find the indicator quite useful, however (it appears as a small E or G in a box on the top bar near the signal...)
I'm running the latest cingular/summiter rom and it jumps for E to G every now and then. Isn't edge available when your accessible to GPRS?
Yes the wizard is capable of edge speeds and will use it when there is that availability on the network. Not all gprs networks have edge.
Ive got a question on this. I have a wizard with T-mobile and I am in a very covered city. but my T-mobile only says connecting to GPRS... like when i try loading a page, it says connecting to t-mobile GPRS, it never says EDGE. What is up with that. how do i fix it to load up EDGE?
EDGE is nothing but Enhanced GPRS. It is always "over" GPRS. So we always see a GPRS connection being made.
Have a look at
http://en.wikipedia.org/wiki/Enhanced_Data_Rates_for_GSM_Evolution
"EDGE (also known as EGPRS) is a superset to GPRS and can function on any network with GPRS deployed on it, provided the carrier implements the necessary upgrades."
As far as the icon is considered, it will be "E" or "G" depending on if the "enhancements implemented" are working at the time or at the transmitters (towers) in the area.
So when it changes from E to G there really is a difference, not just a worthless symbol..
Also how can i test my connection speed on my wizard? I went to dslreports.com and did there wap tests and it told me 3kb/s which i highly doubt is my speed because it loads everything pretty fast.
use the HTML tests, not the WAP... They are much more accurate.
I have an Atom Exec and I only get the "G" gprs icon displaying instead of the "E" icon for edge connection (yes, my mobile network supports edge in my area). I'm only getting about 30-40kbs GPRS download speeds too, so definitely not EDGE speeds. Is this a bug? Is anyone else having this issue or is this some setting that the provider needs to change on their end? BTW, I uploaded the latest ROM.
hey i am also facing the same problem .
bt my case is a bit different one .at some location in my house
i get E sign bt get G for the rest.
i want to kno if edge or gprs network availability has anything to do
with traffic???
plzzz reply
My friend has the exact same subscription to the exact same moibile operator as me (MTC-Vodafone in Kuwait). We both have the same access point and proxy settings.
His Nokia E90 says "3.5G" right under the signal strength bars when he starts a data connection. But my O2 Atom Life just says "3G" in the white square box at the top of the screen and also in the smaller white box above the signal strength bars when I start a data connection.
Does anyone know why that is? I thought that 3.5G is the same as HSDPA. Is that true? And if so, isn't my O2 HSDPA-capable? And shouldn't it say "H" in the white box?
I'm running WM5 if that makes any difference . . .
Please help. I want my 3.5G!
WinCE displays the signal it can achieve. Maybe it's not getting an HSDPA signal where you're at.
omarabdallah said:
My friend has the exact same subscription to the exact same moibile operator as me (MTC-Vodafone in Kuwait). We both have the same access point and proxy settings.
His Nokia E90 says "3.5G" right under the signal strength bars when he starts a data connection. But my O2 Atom Life just says "3G" in the white square box at the top of the screen and also in the smaller white box above the signal strength bars when I start a data connection.
Does anyone know why that is? I thought that 3.5G is the same as HSDPA. Is that true? And if so, isn't my O2 HSDPA-capable? And shouldn't it say "H" in the white box?
I'm running WM5 if that makes any difference . . .
Please help. I want my 3.5G!
Click to expand...
Click to collapse
What I can say is that you can only see "H" when you have HSDPA signal and also when your using your O2 to surf the web or checking email or doing some data transfer via 3G.
Other than that, you will only see "3G"
That is what's happening for my Dopod 838 pro.
I'm getting my Atom Life later in the afternoon
omarabdallah said:
My friend has the exact same subscription to the exact same moibile operator as me (MTC-Vodafone in Kuwait). We both have the same access point and proxy settings.
His Nokia E90 says "3.5G" right under the signal strength bars when he starts a data connection. But my O2 Atom Life just says "3G" in the white square box at the top of the screen and also in the smaller white box above the signal strength bars when I start a data connection.
Does anyone know why that is? I thought that 3.5G is the same as HSDPA. Is that true? And if so, isn't my O2 HSDPA-capable? And shouldn't it say "H" in the white box?
I'm running WM5 if that makes any difference . . .
Please help. I want my 3.5G!
Click to expand...
Click to collapse
I have exactly same problem, my Hermes works perfectly well but the Atom Life never shows the H, I spoke to my operator and they showed me an Atome life (Chinese version) and that showed the H, no problem whatsoever but mine (English version) no way it will show, so the people at the operator said I should get it repaired as it should show an H when in HSDPA coverage.
O2 have now had it in for repair twice and last time even said that it does not support HSDPA, I just hope your service center in Kuwait is better than the one in Hong Kong coz they have absolutely no idea about mobile phones.
It should not matter whether WM5 or WM6 according to the operator.
3.5G is the same as HSDPA so there you are correct.
I'm not getting the H sign after I upgraded to WM6. When I was using WM5, the H sign appear when there is 3.5G service.
I contacted O2 support and they ask me to connect to internet when I am in the 3.5G area. I did and the indicator changed to H. So, I replied back to them stating that this is not what it supposed to be (in WM5, you do not need to connect) and they replied that it will be in the list of improvement... sigh...
normally without data passing thru it will fall back to 3G connection, when there is data going thru it will use 3.5G (HSDPA) if available. however i think the today screen or signal update is bugged it never show the current status when changed.
u can try downloading a big file and turn off the screen (hit the power button once) then turn it back on again. it will update the current connection speed.
btw I am using Atom Life WM6 CHT
Hi,
I have bought an uses hw6915 device, which works fine, except for EDGE. I´m connecting to web.vodafone.de (Germany) without any problems while in GPRS. As soon as I´m approaching an EDGE network and the [E] appears, the data transfer is stopped, server can´t be reached but the device is logged into the EDGE network.
Phone works in EDGE network as long as I´m not connected to APN.
Does anyone has a clue? Could the device defective or is it a strange configuration problem?
Is there a way to swith off EDGE in registry?
aziztheprophet said:
Is there a way to swith off EDGE in registry?
Click to expand...
Click to collapse
Perhaps the carrier that runs that EDGE enabled tower doesn't have a data roaming agreement with Vodafone. That would cause you to become disconnected once you hit that EDGE tower.
Just an idea, as I'm not sure how data roaming agreements work in Europe.
EDGE is just an extension to GPRS. and only between both supporting radio's (both network and client device). If you dont see the E for EDGE coverage, chances are you just aint in range of an EDGE enabled transmitter. Most countries that have 3G wont bother using EDGE, orange in the UK say that EDGE is only really used as a fall back when you are out of 3G range.
I dont know of any way to force EDGE use, and if there is Id like to hear it! GPRS sucks!
It was a technical error. HP replaced the mainboard, now it works great...
Hi all. recently upgraded my vario to win mob 6 with a rom off here...XM6r5 to be exact. All runs fine except the problems i am having with the radio connection. I cannot change the band selection from auto to GSM. I think the phone thinks its 3G but i dont want that i need gprs only as the 3g signal round here is rubbish and as it is its hammering my battery life. When i try to change the band it says it cant be done right now please try later!!!?
I have manually selected O2 in the operator selection, i have the G symbol on the top bar, sometimes this becomes an E, i presume for Edge.
Anyone any ideas how i can solve this??
Thanks
the wizard can't handle 3g, so it wouldn't think its 3g.
the G is for GPRS, and the E is for Edge. this only means that connection is available, not actually connected.
So, to answer your question, you should try the autoconfig (network wizard)