I have had this problem;
I previously successfully connected to my work PC with activesync 4.0 over bluetooth & my XDA II running WM2003, now having upgraded to WM2005 I am unable to re-establish an activesync connection via Bluetooth.
The PC is running XP SP1 with a TDK Bluetooth dongle & it's associated drivers (This is known to be setup correctly with other bluetooth connectivity having no problems)
I have tried using the "Geekzone" activesync over bluetooth step through, but I believe this is written for earlier versions of both activesync & Windows Mobile OS.
Would somebody who has successfully achieved an activesync connection via bluetooth post how to set up thanks.
ROM 1.60b.96WWE
Radio 1.17.00
Protocol 1337.28
Hi All.
I found myself fighting how to configure my Pocket PC (ATT 8525/HTC Tytn/HTC Hermes) as modem for my Vista Computer. I just upgraded the ROM and the new AKU3 Rom replaced the modem with something called INTERNET SHARING. Finally I figured ou how to connect my Pocket PC and Vista computer via USB and BLUETOOTH. Wish this helps others Sergio
hi all
after update my pda2k windows CE2003 to WM6 i got activsync error my ppc con't connect to desktop pc when i restart the desktop pc its connects but many time fail to connect plz help me what can i do i m using microsoft activsync 4.5 and windows xp.
is there any FM radio software for imate pda2k WM6??
AddAn
Hi.
Im trying to set up a connection between my Laptop and Charmer but cant find a Bluetooth Modem.
Everything else works perfect.
I Paired them and found two Comports but no Modem.
OS Is Windows XP SP2
Charmer WM5 OS 5.1 461 (Build 15671.3.3.0)
Any Hints?
Thanks.
For a running project we moved from old HP PDAs to new HTC "Touch 2" smartphones. But unfortunately the bluetooth stack preinstalled on these devices isn't accepted by Labview Mobile applications, and the Widcomm stack in Labview is not compatible with this phone.
I did the following procedure to try and get the program working:
Labview BT stack
Hard reset of device
Turn on bluetooth, set to discoverable
Via LabView/Project Manager/ Windows Mobile 6 Device/ Install / "Support for Widcomm Bluetooth" install BT support on PDA, accept install on PDA.
Soft reset PDA, after reset the message "'BTTrayCE' is not a valid Pocket PC Application" is shown, and it's not possible to turn on BT.
By removing "BtCoreIf.dll" & "BtSdkCE30.dll" from the /Windows dir on the PDA, and soft reset, BT will turn on again.
Start Labview application (StimCom CRE_PDA.exe)
Select 'Search for BT devices'
StimCom CRE_PDA.exe will crash, and WM asks for error reporting
notes: method above installs Widcomm stack for Windows mobile version 3. The program is listed on the PDA as "NI Labview Pocket PC Bluetooth support 7.1". Uninstalling this program from the 'remove programs' will fail.
On the clean HTC image "BtSdkCE50.dll" and "BtSdkCE30.dll" are present in the Windows directory, so I assume that both v3 and v5 of the Widcomm stack are allready installed.
This leads to the conclusion that Widcomm v3 stack is needed, but the one provided with Labview is not compatible to this system, and the version present on the device is not compatible with Labview.
(v4 doesn't exist)
Step 1 till 3 are enough to get the Labview program running on a Sony Erricson Eperia with "Jack v5.0" WM6.5 firmware (the same BT hardware?) and on a HTC Touch with a Dutch WM 6.0.
According to http://zone.ni.com/reference/en-XX/help/372508B-01/lvpdagsm/pda_install_widcomm/ when both the "BtSdkCE30.dll" and "BtSdkCE50.dll" are already present, you must only copy LVBtw.dll into the Windows folder of the device. I tried that as well, but the program still crashed as soon as you try the bluetooth connection.
I also tried to copy "BtCoreIf.dll" & "BtSdkCE30.dll" from the /Windows dir of a Xperia WM6.5 (Custom firmware "Jack v5.0" (International English) because that device also had WM6.5 and the program worked fine on that device. But on the HTC Touch 2 it gave the "'BTTrayCE' is not a valid Pocket PC Application" error.
The same error is given when I try to install the Widcomm stack for x51v ( http://www.mobilitysite.com/boards/...widcomm-axim-x50v-x51v-state-development.html ), and the same error is given if I copy these files from the Broadcomm SDK (BTWCE-1_7_1_5201-SDK.zip)
Firmware of the HTC Touch2 NLD:
R 3.48.25.27
G 61.41t.25.31H
D 1.28.66092
Any suggestions on how to fix the problems with the BT stack?
(install custom firmware is not an option, due to legal issues)
Thanks in advance.
(the question is also asked in the NI developers zone: http://forums.ni.com/t5/LabVIEW/Err...ocket-PC-Application-quot/m-p/1272414#M531155 upto now no answers have been given)