Hey Guys,
Ive been using a trial of voice control for a few days now, and wondered wether i have to press my mapped button everytime i want to tell my xda what to do.
As far as i can make out, if i have to press a button each time, it looses its appeal quickly
I use the hands free xda headphones to command it, so while im on my bike it would be nice to tell media player what to do without pressing a button in my pocket each time.
Please help,
Adam
There is no "Microsoft Voice Control", neither there is a "Microsoft Voice Command Trial"...
Chatty said:
There is no "Microsoft Voice Control", neither there is a "Microsoft Voice Command Trial"...
Click to expand...
Click to collapse
I apologise, using the word "control" rather than "Microsoft Voice Command", and there is a trial of this software, im using it right now and I downloaded it from http://www.handango.co.uk/PlatformP...2&platformId=2&productType=2&productId=151270
So does anyone have an answer to my question above, do I have to press the button to start "Microsoft Voice Command" everytime I want to do somthing.
Thanks
i suspect that it does it like that because of cause if it would just catch the commands when ever spoken it would have to be turned on all the time
and if it were running like that it would be trying to recognize background noise and voices as commands all the time and use even more power and possible recognize some of the stuff as something and do odd things
I thought that might happen too, then i realised i have the 2 call buttons on the handsfree earphones that are easy to access (ref and green caller buttons) however i cant map these to voice control, does anyone know how to hack the button mapping ? like the volume sliders
You can only map buttons 1,2,3,and 4
Thanks everyone for your inputs, i have now managed to map the green or red buttons to anything i like, so now i can use my xda earphones green button to tell voice control what to do, works a treat, if anyone wants to know how, just ask.
adam_beasley said:
Thanks everyone for your inputs, i have now managed to map the green or red buttons to anything i like, so now i can use my xda earphones green button to tell voice control what to do, works a treat, if anyone wants to know how, just ask.
Click to expand...
Click to collapse
pls go ahead and post how u did it..
Go to http://ae.inc.ru/aebplus_t.html and install this simply utility onto your XDA (found searching on the forums earlier)
Once this is done, you can choose to unmap hardware buttons (red and green call buttons) as well as the volume slider etc etc
Then, like voice control requires, you go to control panel > buttons.
You will notice the usual "Button 1, Button 2" etc, however now you have the option to map "Green btn" or "Red Btn" (or any button you unmapped)
Link voice control to either of your choice, I used green for this test. Once you have done this, plug in your xda official headphones. You can then press the green button on the earphones to activate voice control, and therefore instruct it to do the usual things.
Tonight this was especially usefull on my bike to work, allowing me to change songs without having to stop and take my xda out my bag each time.
This obviously means you loose the use of the green button for accepting or making calls without remapping each time, the onlt workaround for this is having "Phone" on the start menu and just using the touch buttons on the dialer for calling etc.
Hope this is of use to some people out there, its certainly prompted me to buy the full voice control later today.
You can still use the green button to make calls!
Press the button and say 'CALL whoever'
although it isn't a good idea to make calles while on a bike anyway :lol:
Green Phone button mapping
@adam_beasley:
rather than place the phone icon (shortcut) in the start menu, why not map the phone to let's say contacts or calendar buttons?
you can also map 3 programs to a single button & access the programs by the number of press(es). program 1 = single press, program 2 = double press, and so on....
also, you may try to map the phone function as program 2 in the green button so that when you double press it will function as the usual phone button.
unluckily, I can't test & confirm to you since I haven't reinstalled it yet after the upgrade to WM2k5 V1.60a.
Cheers.
The problem i have from all of this, is that during playback on media player i toggle the screen off to save power, when i do this, my red or green buttons do nothing, even with button lock off.
So even tho this system works well, its flawed bigtime for me over this one problem, anyone have some ideas ?
Why don't you try turning the backlight down to 0%, but leaving the screen on? It's the backlight that is responsible for most of the battery drain.
You could make a profile in PocketZenPhone with all the settings for your audio playback (backlight, volume etc). I seem to remember there is a way to make PocketZenPhone change profile from a button press - you could map a double click of 'hang up' button to change profiles.
I also switch the screen off whilst listening to MP3s and have mapped the Action (joystick click) button to 'toggle' the screen display. In this mode pressing any other button does toggle the screen back on. I do not have the ButtonLock on as you can't then wake the machine up to accept a Voice Command. I have Voice Command currently mapped to the Record button on the side of the device but would like to map to the Green button. I would prefer single press - to answer the phone, double press - to activate Voice Command. I have e-mailed a few questions to the author of the AE Button Plus utility to confirm this can be done.
anybody want voicecommand
Email me i will attach to you.
If only we could map the BT headset to the green button....
Is there a way to get the BT headset into the option list for the green button. Is there some other BT program that facilitates the recognition of the main button of the BT headset?
AE Button Plus has inactivated several buttons in my Blue A
Well, it seems i should read with more attention, but now that the damage is done I hope someone can help.
I installed AE Button Plus in my Blue Angel, and as a result the ok and explorer buttons do not respond to anything anymore. I then unistalled the program, did a a full back up, a hard reset followed be restoration. Nothing has changed, these two buttons are still dead. The don't even show on the list of buttons anymore. Argggghhhh!!
Any help will be appreciated. Thanks
Hi, this is slightly off-topic, but I tried the PC version of Voice Command a long time ago (I don't think M$ still has it out on the streets), and it used to listen to every command, but won't do anything unless I begin the command with the word "Computer"... e.g. "Computer, what time is it?"
Wonder if there is such a switch for the O2... :roll: O2, what's my battery status :lol:
Re: AE Button Plus has inactivated several buttons in my Blu
gonzaloblanco1992 said:
Well, it seems i should read with more attention, but now that the damage is done I hope someone can help.
I installed AE Button Plus in my Blue Angel, and as a result the ok and explorer buttons do not respond to anything anymore. I then unistalled the program, did a a full back up, a hard reset followed be restoration. Nothing has changed, these two buttons are still dead. The don't even show on the list of buttons anymore. Argggghhhh!!
Any help will be appreciated. Thanks
Click to expand...
Click to collapse
This happened to me at first, but i think your biggest fault was backing up while having this error, now any restoration is going to have this fault.
Rather than uninstall, just try installing it again, however when then screen appears with buttons to handle (about 7 drop down boxes), just choose "Do Not Handle" on each button then soft reset, worked on mine, then I uninstalled it.
How to upload the files to ftp, i have voicecommand 1.5, it working fine with me.
Hi all,
I've been using the wired handsfree that came with my k-jam for a few days now, and I can seem to get it to initiate a phone call. When I press the button, nothing happens. Accepting an incoming call by pressing the button does work, so the button is working. In the manual it says that the button on the handsfree is a 'send/end' button, so I suppose it should be able to do that. Has anyone had the same problem perhaps?
Regards,
David
same here can hang up but can't dial via button
i cant find the option to do this anywhere in the manual or the fone-does it have this facility?
When you dial dialpad has a button - speaker on = try that
If you mean subject to a conversation, press and hold green key, or at least on the other phones that works.
V
when answering a call, say if im driving and dont have my handsfree available, i just want to know what to press so i dont have to hold the fone to my head while driving.
will try those suggestions-thanks :wink:
Hi Folks,
Just bought this as loads of reviews say is great, but Im having a problem assigning the VC to a decent button on my Uni. I think I will be using this in the car in the Brodit mounting.
Are you using VC 1.6 and if so, which button was best to use and how did you set it.
I have followed the instrctions, but can't seem to sort it with a button.
I have added a shortcut to the start menu and this seems to work.
TIA
Mav
I just set it to replace the voice dial button - button 4, I think? However, I think it seems to mess with the "Press and Hold" functionality of that button, so I no longer have the "Record" function available (not that I ever used it).
Cheers,
Steve.
StevePritchard said:
I just set it to replace the voice dial button - button 4, I think? However, I think it seems to mess with the "Press and Hold" functionality of that button, so I no longer have the "Record" function available (not that I ever used it).
Cheers,
Steve.
Click to expand...
Click to collapse
Thanks Steve, I'll try that for now.
Mav
it refused to work with button 4 for me (all combinations tried
i first assigned it to button 3 (camera) but when i clicked on that since i had turned off 3g for the battery life, the video call button had no use, i assigned it to that.
then i got my ht820's i use that now
r3bel said:
it refused to work with button 4 for me (all combinations tried
i first assigned it to button 3 (camera) but when i clicked on that since i had turned off 3g for the battery life, the video call button had no use, i assigned it to that.
then i got my ht820's i use that now
Click to expand...
Click to collapse
It had refused to work on button 4 for me before as well, but seems ok now.
The best news for me is that I found my BT headset (bloody wifes handbag of all places) and one press of the button kicks VC into life and it works great.
Now, if I could only understand what the VC bint is saying..........
Thanks
Mav