Related
I have for a long time been looking for software updates for my O2 XDA (I have ROM 3.02.00 ENG and radio version 4.01), but with no luck.
Now I have noticed new software for free download for the Qtek 1010, apparently ROM 3.16.13 ENG and radio 3.19.01 (should this be 4.19.01?)
Is it possible to use these 2 files to update the software?
As my O2 XDA is unlocked, I wonder whether updating the ROM and the radio version will have any effect on the unlock, i.e. could the phone change to locked?
Best regards
Amoll
amolldk said:
Now I have noticed new software for free download for the Qtek 1010, apparently ROM 3.16.13 ENG and radio 3.19.01 (should this be 4.19.01?)
Click to expand...
Click to collapse
Where have you found these files!?!? I have a Qtek, but haven't heard anything about no upgrade. You bet I'm interested!
/b
Can be found for download on these sites:
http://www.idedata.no/
http://www.klingtech.dk/produkter/Qtek-1010.php
I am still curious whether this upgrade can be used for O2 XDA.
Anyone for a test?
Best regards
Allan
It's working! I just upgrade the radio rom from 4.16 to 3.19.01.
Sound more like a downgrade then a upgrade. :lol:
Did you also did the winCe rom upgrade?
Don't look at the first number in the OS or radio versions, it denotes region. 4.16 is an older version than 3.19.
Was the upgrade done on a Qtek 1010 or a XDA?
Amolldk
Hi
Anonymous said:
Can be found for download on these sites:
http://www.idedata.no/
http://www.klingtech.dk/produkter/Qtek-1010.php
Click to expand...
Click to collapse
They only say, somthing about sending the OS via eMail. It seems, that there now downloads left ...
Has somebody got that Download and is willing to share it with us ??
Thanks
The image can be downloaded on the first site...
however, I have just reflashed my XDA/MDA with the older irish ROM, it has plenty more features than this one, GPRS standby and ISDN call type.
Don't trust the version numbers
Zviratko said:
The image can be downloaded on the first site...
however, I have just reflashed my XDA/MDA with the older irish ROM, it has plenty more features than this one, GPRS standby and ISDN call type.
Don't trust the version numbers
Click to expand...
Click to collapse
Where is the Download option for the Radio Version on the first side, I can´t find it.
http://www.idedata.no/support/support.asp?ID=299
SladeHammer said:
Where is the Download option for the Radio Version on the first side, I can´t find it.
Click to expand...
Click to collapse
Think this might be more usefull http://www.idedata.no/programmer/ce316upgrade.zip For CE
And for the radio
http://www.idedata.no/programmer/radioupgrade.zip
Please note you must first upgrade the CE version then the Radio...upgrading the radio only can cause problems
NoBackUp said:
SladeHammer said:
Where is the Download option for the Radio Version on the first side, I can´t find it.
Click to expand...
Click to collapse
Think this might be more usefull http://www.idedata.no/programmer/ce316upgrade.zip For CE
And for the radio
http://www.idedata.no/programmer/radioupgrade.zip
Please note you must first upgrade the CE version then the Radio...upgrading the radio only can cause problems
Click to expand...
Click to collapse
You are wrong, the Radio update goes first and patches WinCE.
btw. don't use the update, really, use the Ireland O2 update ROM.
Strange file after updating
I have upgraded my Qtek using
http://qtek.dk/software/upgrades/316-CE-update.zip
http://qtek.dk/software/upgrades/Radioupgrade.zip
I performed all the instructions correctly and my pocket pc now has the
upgrade. However, in the remove programs, there is a file called HTC RSUupgrde.
I dont know I don't have to remove this or should it actually be there on my pocket pc? What happens if lets say I have to do a
hard reset and I lose this file?
Any suggestions? :?:
[email protected]
How to use FM in India
Hi,
My frnd has gifted me a O2 XDA Orbit.....I bought this from UK...BUT I am not able to listen fm in India.....
Please help me.......
Also plz suggest me some website to get some games, software for O2 XDA Orbit.....
Thanks in advance
Sam
How about this O2-ROM version: 3.20.06 ENG with ROM Kitchen version 4.00.16
Not sure what you mean, but I intend to stick the 3.20 ROM in the kitchen as soon as I have some time...
Socheat
How different between ROM from O2-version: 3.20.06 ENG with ROM Kitchen version 4.00.11, or it is the same OS, (sorry my english)
thanks
Re: Socheat
socheat said:
How different between ROM from O2-version: 3.20.06 ENG with ROM Kitchen version 4.00.11, or it is the same OS, (sorry my english)
thanks
Click to expand...
Click to collapse
3.20 is the last known version to use the PocketPC 2002 OS, 4.00.11 is one of the latest version with the new version of the OS: Windows Mobile 2003.
XDA OS
Many thanks, one question, i live in cambodia, my network is CamGSM (Mobitel Cambodia), it is posible to update to ROM 4.00.16 T-Tobile? or ROM 4.00.11 is the same 4.00.16 T-Mobile??
If you have Asian Xda use ROM 4.00.05 or ROM 4.00.11.
ATT Radio 4.21.00 works well too if you want the "always on" feature.
Just a question for you guys. I just updated my XDA to 4.00.05 and I am not getting the sound when I connect my xda to the computer (The active sync sound) I know its something small but its bothering me. Is it fixed in 4.00.11?
I assign my own sounds to events
I want it to say hi to my computer when I connect it. It did with Pocket Pc 2002. :-(
XDA OS 4.00.11
Yes, Sure it is very good one, before this my XDA run ROM 3.16 ENG WM2002, now upgrade ROM to 4.0011 WM 2003, every I need are appear, Thanks alot to XDA-Developer, but if you know how to get ring tone with MP3 or MIDI, please let me know.
Re: Socheat
socheat said:
How different between ROM from O2-version: 3.20.06 ENG with ROM Kitchen version 4.00.11, or it is the same OS, (sorry my english)
thanks
Click to expand...
Click to collapse
Can i request to give me cab files for CamGSM (Mobitel Cambodia)...for favor.
you can extract it from your ExtendedROM, i need this files for making an upgrade for xdall Cambodia version...
thanks
How can i find soft and tool upgrate win to 2003 or 2003SE, and upgrate version 3.20.26 to 4.01
hi` i'm a newbie, pls help me. thankx
fantasy said:
How can i find soft and tool upgrate win to 2003 or 2003SE, and upgrate version 3.20.26 to 4.01
hi` i'm a newbie, pls help me. thankx
Click to expand...
Click to collapse
Try cooking your own ROM at http://lumpistefan.dyndns.org/.
I would recommend yu take some time in the Wiki section and build up understanding of issue with ROM upgrade. 1000 of valuable post on ROM upgrafe and Special Edition ROM (quite old now)
Tanguy
fantasy said:
How can i find soft and tool upgrate win to 2003 or 2003SE, and upgrate version 3.20.26 to 4.01
hi` i'm a newbie, pls help me. thankx
Click to expand...
Click to collapse
Try cooking your own ROM at http://lumpistefan.dyndns.org/.
I would recommend you take some time in the Wiki section and build up understanding of issue with ROM upgrade. 1000 of valuable post on ROM upgrade and Special Edition ROM (quite old now)
Tanguy
I've been having probs with Lumpi. I can't get it to make an 4.-1.19 Ger rom or giving me an error with 4.01.12 Eng and York is closed.
slamma said:
I've been having probs with Lumpi. I can't get it to make an 4.-1.19 Ger rom or giving me an error with 4.01.12 Eng and York is closed.
Click to expand...
Click to collapse
Where is the problem?
What for error do you get?
If you have selected an operator config, have you regarded the hint to let some free space for the cooking process?
Stefan
thank
to Tanguy: thank you, i'd tried it, and my ppc work good now .
Re: thank
fantasy said:
to Tanguy: thank you, i'd tried it, and my ppc work good now .
Click to expand...
Click to collapse
:lol:
Re: Socheat
xda2jojo said:
socheat said:
How different between ROM from O2-version: 3.20.06 ENG with ROM Kitchen version 4.00.11, or it is the same OS, (sorry my english)
thanks
Click to expand...
Click to collapse
Can i request to give me cab files for CamGSM (Mobitel Cambodia)...for favor.
you can extract it from your ExtendedROM, i need this files for making an upgrade for xdall Cambodia version...
thanks
Click to expand...
Click to collapse
I just update my XDA II to W2K5 with full RAM, follow your advice
How to get Cab file of CamGSM (Cambodia) where in my XDAII will send
you. what is file name where folder.
This is mime
Thanks
Will O2 bring out a official WM2003 release?
Can anyone verify that the 4.00.11 ENG WM2003 in the ROMKitchen works with a O2 XDA.
Thanks
confirmation
Yes, I can confirm that this version works. I run it on my O2 XDA with radio version 4.21.00. Great combination.
Same for me , it rock's
Is there any problem ? For instance, can you use the buttons to reply/hang up calls ? Will it be possible to make upgrades ?
Thanks,
Re: confirmation
siliconaddict said:
Yes, I can confirm that this version works. I run it on my O2 XDA with radio version 4.21.00. Great combination.
Click to expand...
Click to collapse
Is the signaling bar status good with the 4.00.11 ENG WM2003 .How much bars do you get .
With 3.17 ENG PPC 2002 i get three bars the max in the UK.
And also what about GPRS always on?
Having problems with Radio Version 4.21 from England, ie the phone will not work (I am in Australia). The phone was working OK until I performed the upgrade
It has been suggested that I install Radio Version 6.12 from T-mobile and I have downloaded the file from Yorch, this comes up as an nbf file and I wonder if I should flash it as I can not find RSUupgrade.exe. Any suggestions ?
Chris
You downloaded the wrong file go back to Yorch's site and look under Upgrades and download "USA T-mobile Latest Radio Stack (Unofficial)
RU 6.24.00".
HTH
dont Australia use 900/1800 like europe ?
if that is the case the us RSU would ruin the phone even more
Rudegar said:
don't Australia use 900/1800 like Europe ?
if that is the case the us RSU would ruin the phone even more
Click to expand...
Click to collapse
You know thats what I thought until I received the below PM:
-------
Radio Stack for Australia
Wed Nov 12, 2003 13:10
Hello Qman,
Thank you for your reply! But great news here as I have managed to get my RSU version to work in Australia.
My carrier is Optus and SIM card is fine.
Basically by trying most RSU versions I wasn’t able to get the phone to work. Funny thing is I tried the RSU version for the O2, which is supporting here in Australia but to no avail! I ended up using the new T- Mobile for the US and works like a dream have fully signal as well.
New version is RSU 6.24.
Cheers Erebus,
-------
HTH
Further to my problems I upgraded to the T-mobile 2003 ROM an their latest Radio stack 6.24 and all is working OK.
I had sent the XDA to Melbourne (Australia) to the accredited Service company (Accord) and they had sent it back saying that it was buggered. I had some very helpful advice from Peter and Joe and have everything working fine. Curiously, when I had XDA 1.2 and the T-mobile Radiostack the phone kept crashing after reboot. Since upgrading to T-Mobile 4.00.21 ENG and Radio version 6.24.00 all works well.
I did try to download some Medical software (MIMS) and thisd has proven to be a bit of a problem. The tech dude at MIMS was not too impressed with Pocket-PC 2003
Chris
Great, glad to hear it all worked out ok! 8)
Seems R 6.24 works in many wheres ... I put it on a friend's XDA and it works now (Egypt 900/1800) ... just wonder if it's wise to go for ROM 4.00.21 or keep the 4.00.11 .... I heared that you can't change the ROM after T-mobile ROMs ... is that true ?
Biso007 said:
Seems R 6.24 works in many wheres ... I put it on a friend's XDA and it works now (Egypt 900/1800) ... just wonder if it's wise to go for ROM 4.00.21 or keep the 4.00.11 .... I heared that you can't change the ROM after T-mobile ROMs ... is that true ?
Click to expand...
Click to collapse
Thats great news on RS 6.24, thanks for the tip!
As far as not being able to change ROM's after upgrading to a T-Mobile WM2003 ROM, it will still work but you must use the SD card boot loader upgrade method.
HTH
Help needed, this morning I flash my XDA with USA T-mobile Latest Radio Stack (Unofficial) but not working for my GSM 900. So I flash it back to O2 Latest Official Radio Stack RU 4.21 but it flash until 83% stop forever. So i do a soft rest. Then my XDA can't boot. Can someone help me out on this method? I'm in Malaysia. Using 900/1800 bandwidth.
Hi ...
If you have taken SD backup before upgrading, then go for bootloader menu, press Calendar button, and turn off the Radio part. Try to flash your XDA back to the original ROM and RSU, and then perform a hard reset.
In case you didn't, try the Qtek offical RSU 3.25 from http://www.carrierdevices.com.au/downloads.php?region=Asia Pacific. It works good for Asian operators.
Good luck
Problem FIXED... Thanks for the big help.
T-Mobile Germany has annouced the release date for the Windows Mobile 2003 ROM for the XDA I as December 29th. Hopefully T-Mobile USA will announce something similar today. :roll:
http://www.t-mobile.de/mda/software/1,5193,7482-_,00.html
But this is only for German Model, isn't it?
hmmmm ... and how about the language version ?!
to me seems like only German is to be available ... too bad
Release date is now beginning January
Hope there will be an update....
Regards
Stefan
aren't we talking about the German version of WM2003 ..
announce/release date or in general WM2003 official release for T-Mobile ??
regards,
monika
http://www.t-mobile.com/promos/ppc2003/
this link was working few weeks ago with information about update but now seems to be dead.... somebody spoke with customer service and they said "in the middle of February" so we will see...
for me 4.01.00 ENG work fine
ps. pozdrawiam rodaczke
well, maybe there has been some minor problems ...
with that ROM release so they've decided to stop distributing for a while, hard to say ...
I presume as official release is hopefully coming with a short notice stick with current version I have
regards,
monika
ps. rowniez witam i pozdrawiam
somebody wrote that 4.01.00 ENG is only good to US tmobile ppc owners because of radio ... I mean only for PW10B1 units ...
I did reflash mine yesterday with this version and I like it so far .... signal indicator doesn't look normal because I dont have signal but my ppc recives calls normally ....
mine XDA is also PW10B1 .... heh
now I know for sure that I have US version, thank you for the tip ...
dziekuje i pozdrawiam,
monika
ps. out of curiosity, have you already get my private message ???
HI Monika,
Where did you get this T-Mobile WM2003 ROM?
Is it English version?
Can it be used in Asia?
Many thanks,
chris_khho said:
HI Monika,
Where did you get this T-Mobile WM2003 ROM?
Is it English version?
Can it be used in Asia?
Many thanks,
Click to expand...
Click to collapse
hello, I got it from http://www.yorch.net/ but I use an US version of XDA, for me it's hard to say whether it suits Asian hardware version, my rough guess is that Radio Stack version shall be different .... unfrtunately I have never came across the Asian hardware version
but before making any upgrades read that forum, e.g.
http://forum.xda-developers.com/viewtopic.php?t=4630
and also the other threads just to double check
regards, monika
Tks Monika,
But I see that you are using WM2003 T-mobile ROM 4.00.21.
From Yorch, 4.00.21 is only nbf file which is not nb1 so that I can't use the SD method for upgrading.
Any hint?
Marcyjok said:
somebody wrote that 4.01.00 ENG is only good to US tmobile ppc owners because of radio ... I mean only for PW10B1 units ...
I did reflash mine yesterday with this version and I like it so far .... signal indicator doesn't look normal because I dont have signal but my ppc recives calls normally ....
Click to expand...
Click to collapse
i have PW10A1 and i installed the v4.01.00 tmobile update i just downloaded an cooked rom from yroches kitchen then unzipped it all and replaced the nbf file from the v4.01 over the cooked rom nbf and flashes it that way works fine on english netowrks and i still have 900/1800 mhz just what ever you do do not go into phone options and click on the band tab if you do you will loose 1800mhz bank and then be on 900/1900 if you do this load up the bootloader click the calendar button and click on gsm 900/1800 and itll say reset or some crap do this then softreset and youll have 900/1800 back again but dont click on the band tab or youll have to do this.
gaz
p.s ive found it to be quite stable so far but seems to run kinda slower then v4.00.11 but it has improved features
hi
few questions
I have US tmobile Pocket PC Phone so it is type B so I flashed with no problem with 4.01.00 (RUUv2.04b_CEv4.01.00wwe_VS_Ozone_Test_(Integrate_Radio_6.24.01).exe) so I think that this soft will work fine with Monika's XDA if it is American....
Monika your XDA is from AT&T ? or TMobile ?
Is it ok to use it with European PW10A1 ?
gaz do you have exactly same ROM as I have ? (check my signature)
and this problem with band tab is only one ?
do you see TMobile logo when U do a soft reset?
Anybody use this soft ver. in Europe?
i use 4.01.00 with asian radio stack 4.21.01 with no problem
i used flash method when upgrading the rom
i unzip the exe file, took the .nbf file and write it to my sd card using OSImageTool and boot my xda with the SD card... 5 minutes later my XDA is running WM2003 with the latest ROM version :lol:
for asian users, do not open the band tab... if you do that, you have to go to bootloader and choose band 900/1800 to make your xda work again
Marcyjok said:
hi
few questions
I have US tmobile Pocket PC Phone so it is type B so I flashed with no problem with 4.01.00 (RUUv2.04b_CEv4.01.00wwe_VS_Ozone_Test_(Integrate_Radio_6.24.01).exe) so I think that this soft will work fine with Monika's XDA if it is American....
Monika your XDA is from AT&T ? or TMobile ?
Is it ok to use it with European PW10A1 ?
gaz do you have exactly same ROM as I have ? (check my signature)
and this problem with band tab is only one ?
do you see TMobile logo when U do a soft reset?
Anybody use this soft ver. in Europe?
Click to expand...
Click to collapse
I have an US version of XDA with T-Mobile ROM installed ... and it's T-Mobile ppc pe, radio 4.21.00 and protocolversion 32S54
regards,
monika
Hi Toshiro,
I am a bit confused. The 4.00.21 nbf file from Yorch cannot be used by OSImageTool since I tried that before and confirmed by someone else in this forum. He said only nb1 file can be used for SD method.
Also, where did you get this 4.01.00 ROM?
Thanks v much.
chris_khho said:
Hi Toshiro,
I am a bit confused. The 4.00.21 nbf file from Yorch cannot be used by OSImageTool since I tried that before and confirmed by someone else in this forum. He said only nb1 file can be used for SD method.
Also, where did you get this 4.01.00 ROM?
Thanks v much.
Click to expand...
Click to collapse
Use XDArit.exe insted of the OSImageTool and you can write it to an SD card. www.yorch.net has 2 versions. if the newer one doesn't work, try the older one. I also found I have to unplug my cradle from my computer to get XDArit to work properly.
MrDollyMaker
the best places worth trying
http://forum.xda-developers.com/viewtopic.php?p=21147&highlight=#21147
and also
ftp://tmobile:[email protected]:21
regards, monika
Thanks v much.
But that's integrated with the us radio which is not suitable for me.