suspect my new rom is corrupted on my jamin
does anyone know how to completely flash the rom before installing a fresh copy of the new rom. As i suspect the very 1st rom installed in it by the manufacturers were corupted. is there like a bootloader program i could use? or anything? pls help me
when i try re-installing the new rom come out with error message of [326] and [302]
but if i keep trying and try it eventually succeed but the rom does not appear clean pls help. keps on crashing and fading all the way white and taking ages to do a soft reset pls help, thx
Related
Hello,
my friend's /he dodn't speak english/ Leo have problem. The notifications of WM automatically pops up. It start slowly and as time goes on it pops up more frequently and faster. It is impossible to work on it. He tried to flash custom ROM again, but any change.
He tried to remove the screen protector but no luck.
He wearing his Leo in his pocket , but there are any physical changes on the Leo
ANY IDEA?
try going back to the stock (provider) rom.using custom roms can leave old files after flashing which can cause problems.
if that doesn't help try using mtty to format the phone and then flash a new rom.
okey, i tell him, but i can't believe to this because i use the same rom. this problem started after 2 weeks of using the rom.
but thank you very much and i will translate this to him.
hope it will help
okey. he tried to reflash the shipped rom but no luck. tried few hard reset and no luck. today he gonna try myty.
Dear Gurus
I have a HTC 4350 and i was using FingerMe 6.5.1 ROM It was working fine before yesterday and now its keep on restarting on Win Loading screen so today i tried another ROM that is ClearRom 6.5.1 ROM and i flashed it using SD card and installation went well. but after installation when i started it for the first time its still giving the same behavior so guys i need to know what the problem might be any guess or if any other had experience the same problem please let me know.
actually i am kind of confuse it there were any kind of software problems it must be removed after flashing it and if there is some kind of hardware problem then why the installation went well. please help on this.
Regards
Mubashar
Hi. I had same problem with all 6.5 ROM's I've tried. I understood that is a problem with microSD card. Have you tried to reset without card in it? It worked that for me
Hi guys
I'm a NRG rom user, com5 build and suddenly I'm experiencing the wierdest problem, which I can't solve by myself. Let me explain what happened.
I flashed the latest rom but also went back a couple of versions. I always flash with the flash util which has the task29 feature build in. What happens is that when I flash a rom, all goes well, the complete process including the XDA_UC auto install process. After that everything is okay and everything works. But when I restart the phone all processes are starting to fail loading. Strange thing is that when I remove the storage card and reboot the phone everything is back to normal again. But as soon as I boot the phone with the storage card in everythings fails. I even had white screens of death when booting with a storage card mounted. I also tried dutty's latest rom and mirri's latest, all have the same problem. This problem appeared all of a sudden, all the cabs etc worked like a charm before, so the problem doesn't lie in the cabs or the files autoinstalled during the xda_uc.
A weird solution to this problem is to flash the latest dutch official stock 1.66 rom which is available for the hd2. With that one everything works, also after a reboot. So I can't use a custom rom anymore. Could this be due to a hardware problem? And if so, how can I explain this to HTC if I want to try to send it to them for repair?
Ow and of course I tried it with several other microsd card, all having the same error, so it's not a sd card issue.
I would relock and the re-unlock your hspl and see what happens. That is indeed a weird problem (that you can't send your phone in for).
Good luck
TheWizzard2203 said:
Hi guys
I'm a NRG rom user, com5 build and suddenly I'm experiencing the wierdest problem, which I can't solve by myself. Let me explain what happened.
I flashed the latest rom but also went back a couple of versions. I always flash with the flash util which has the task29 feature build in. What happens is that when I flash a rom, all goes well, the complete process including the XDA_UC auto install process. After that everything is okay and everything works. But when I restart the phone all processes are starting to fail loading. Strange thing is that when I remove the storage card and reboot the phone everything is back to normal again. But as soon as I boot the phone with the storage card in everythings fails. I even had white screens of death when booting with a storage card mounted. I also tried dutty's latest rom and mirri's latest, all have the same problem. This problem appeared all of a sudden, all the cabs etc worked like a charm before, so the problem doesn't lie in the cabs or the files autoinstalled during the xda_uc.
A weird solution to this problem is to flash the latest dutch official stock 1.66 rom which is available for the hd2. With that one everything works, also after a reboot. So I can't use a custom rom anymore. Could this be due to a hardware problem? And if so, how can I explain this to HTC if I want to try to send it to them for repair?
Ow and of course I tried it with several other microsd card, all having the same error, so it's not a sd card issue.
Click to expand...
Click to collapse
sounds like a defective phone!!!!
Yeah, that was my idea too. I tried relocking and reunlocking it with HSPL, but that doesn't matter.
But the problem is, how do I explain this to HTC if I want to send the phone to them for repair? I can't tell them that the problem only occurs when I install a custom made rom.
Pfff okay, I found the solution. It wasn't a hardwareproblem after all. I went through a terribly long trial and error procedure but finally pinned the problem down to only one cabfile, named HD2MemTweak found in the registry tips and tricks section of the general forum of the HD2.
I'd installed the lastest official 3.14 rom and installed all the cabs I was used to. But noticed, after several reinstalls, that when I installed that specific cab and rebooted the phone, everything went wrong. So I installed it without that cabfile and allw as working fine again. Then reinstalled HSPLv3 and installed the latest NRG Cookie Classic rom, which works fine again.
So that was the problem indeed. But one thing is strange of course, is that the mentioned cabfile used to work and suddenly stopped working. Could this maybe have something to do with the fact that the latest roms were build on the new 3.14 official rom? Who knows.....
Hello everyone on XDA
I write because I need your help as myself can not find the cause of my problem or the original forum rom
I always use Onix currently Rom Realise 13 when flashing the rom and do not install anything, everything works fine
but I would like to use the M2D 2.0 and in the same forum of the Onix is a link where is the recommended manila
I do not install anything apart from M2D, do not install or use a program that normally and still gives me the error when you start the phone, it takes a lot more compared to the time of initiation of the newly installed rom
I apply a hard reset, do not install the M2D, install my normal programs, including Mobile Shell ... everything works OK for a while
in the course of a couple of days, having turned off the cel a few times and couple of starts the same startup problem
when I start talking about the error is that installing the manila or not, I always end up with boot error, when the phone does not start one and only displays a message saying k
"The device can not start just because they turn off the device incorrectly ....."
I think more than anyone knows that startup error ...
I use the rom Onix because they are the only ones that give me problems with my simcard STK service
I hope someone takes the time to give me an idea as me and I ran ...
and even restore the original rom for my P3452, reverted to the CID unlock, flash rom again realize Onix 13 and still gives me the exact same problem
please need help here ... they would appreciate much
Greetings to all
Hello All,
I have an HTC HD2 (TMOUS) that hangs once it gets warm. I got it a couple of days ago. The first thing I tried to do was to update the rom (there was an old stock rom) to the latest version from t-mobile. But when I tried to do that the update process failed at 8% with "error[262] update error". I tried to flash it again, but got the same result.
I tried both the approaches: to flash via usb and via SD card, but the results were the same. Flashing via SD card gave me "RSA fail" error. I have found some related info, but that is not the case since I could flash the radio later. Also I've noticed that after a couple of iterations the phone were vibrating 7 times during the rom update process. Some guys are telling that it could be a motherboard issue (http://forum.xda-developers.com/showthread.php?t=797179 and http://forum.xda-developers.com/showthread.php?t=826119).
Today I tried to update rom again and got it successfull. But the phone has hanged on botting. Taking into account that the phone has been turned off for the whole night I decided to try to put it into a cool place. I put it to the balcony for 5 minutes and the turned it on again. It has loaded successfully and I was able to test wifi and to make a couple of calls. But after some time when it has got warm it hanged.
I have found that some guys had the same problem but couldn't fix it (http://forum.xda-developers.com/showthread.php?t=701349).
It seems to me now that this is a hardware issue (maybe with the internal flash memory module).
Was anybody able to fix the isssue?
Could this problem be caused by my attempts to flash?
Thanks in advance.
Guys,
I'm kindly asking to share your thoughs on any of the questions. It is very important for me since I don't know whether it is my fault or the phone was already damaged.
The rom I tried to flash was a stock rom and the flashing process hasn't been interrupted.
Thank you!
had this issue and indeed it was the motherboard so i had to send it back to htc.
good luck.
az_registration said:
Hello All,
I have an HTC HD2 (TMOUS) that hangs once it gets warm. I got it a couple of days ago. The first thing I tried to do was to update the rom (there was an old stock rom) to the latest version from t-mobile. But when I tried to do that the update process failed at 8% with "error[262] update error". I tried to flash it again, but got the same result.
I tried both the approaches: to flash via usb and via SD card, but the results were the same. Flashing via SD card gave me "RSA fail" error. I have found some related info, but that is not the case since I could flash the radio later. Also I've noticed that after a couple of iterations the phone were vibrating 7 times during the rom update process. Some guys are telling that it could be a motherboard issue (http://forum.xda-developers.com/showthread.php?t=797179 and http://forum.xda-developers.com/showthread.php?t=826119).
Today I tried to update rom again and got it successfull. But the phone has hanged on botting. Taking into account that the phone has been turned off for the whole night I decided to try to put it into a cool place. I put it to the balcony for 5 minutes and the turned it on again. It has loaded successfully and I was able to test wifi and to make a couple of calls. But after some time when it has got warm it hanged.
I have found that some guys had the same problem but couldn't fix it (http://forum.xda-developers.com/showthread.php?t=701349).
It seems to me now that this is a hardware issue (maybe with the internal flash memory module).
Was anybody able to fix the isssue?
Could this problem be caused by my attempts to flash?
Thanks in advance.
Click to expand...
Click to collapse
Before you go trying to replace the mother board or any hardware such as that. I suggest you run a task 29 on your HD2 and reflash the stock ROM. A task 29 totally wipes the current ROM on the HD2 so if it is a problem from you trying so many timez to flash the ROM this will clear that up. Here is a link to the task 29 thread so you can learn more and decide if you want to do it or not.
Thank you for your replies!
T-Macgnolia said:
Before you go trying to replace the mother board or any hardware such as that. I suggest you run a task 29 on your HD2 and reflash the stock ROM. A task 29 totally wipes the current ROM on the HD2 so if it is a problem from you trying so many timez to flash the ROM this will clear that up. Here is a link to the task 29 thread so you can learn more and decide if you want to do it or not.
Click to expand...
Click to collapse
Yes, that's a useful tool, but I'm afraid that I might damage the existing rom and will not be able to flash it agian. Also it requires to flash HSPL before which also potentially might brick the device ( I mean the flashing process).
sike222 said:
had this issue and indeed it was the motherboard so i had to send it back to htc.
good luck.
Click to expand...
Click to collapse
So it was a factory defect, wasn't it?
If I did something wrong during the stock rom flashing process, could be the reason of the problem?
Thank you.
After reading forums it seems to me that the issue appears mostly for T-Mobile US version..
If it is a hardware problem, does anybody know what part of hardware is damaged?
Thanks!