Related
I have a Cingular 8125 and I love it, well, if I can get WiFi and the rest of the connectivity to work with my T-Mobile US account. The phone is unlocked.
I had everything working, except for WiFi. This is what I experience, I turn on WiFi, the device gets an IP, but when trying to connect with PocketIE, it just hangs and I get a time out or could not connect error.
Has anyone experienced these problems? I thought it was a one time issue and hard reset the device, and now I can't connect to anything, except to make calls. All data services seem jacked.
Any advice on how to fix this? Should I go with another ROM? If so, whats the best one out there?
Also, am I suppose to be able to use Pocket IE when I'm connected to my laptop via the USB?
Thanks,
Danny
i tried out the 8125's ext rom and its basicly making your device connect only through cingular settings. I couldn't get internet access through wifi. Not even Pocket msn, cuz they restricted it with a proxy. What i suggest is you hard reset your device, then when you finish with the intro crap ( align screen, cut & paste, set password) simply soft reset your device and there you go, you know have a Unbranded Wiza100 !!
Go into start/settings/connections tab/connections, under "mediaNet" select "setup my proxy server". Uncheck the box that says "This network uses a proxy server to connect to the Internet."
Hope this solves your problem.
That does it... but with T-Mobile... I need to use a proxy... is there a way around this? I would like to use the proxy...
I can get it to work when removing the proxy... however, if I have the WiFi on and proxy setting on... it won't work. And if I have proxy setting and wifi off, then GPRS doesn't connect.
Any Advise?
try this out. these are the tmobile settings off the clubimate site. they might be out dated but give it a shot. Also don' tthink theres no solution cuz the wizards coming out on tmobile at the end of this month
For some reason, when I install that cab (by copying it to the device and tapping on it), It doesn't seem to do anything. What am I suppose to see after the installation? It doesn't do anything...
Danny
This doesnt seem normal to me as i dont remember this happening when i first got my 8125. When i go to internet explorer after i turn on wifi and connect to my home network it starts loading the page and then the connecting to gprs dialog box shows up. It still seems like it is using wifi but when i click on the wifi signal the gprs time meter is counting up. It seems to me like it shouldnt try to connect to gprs if the wifi signal is already picked up and connected. I thought i remembered reading about this somewhere but ive read so many topics in different places that i cant find it. Is this normal or should i do something to fix it? Thanks in advance.
Ty
anyone?
i just did this last night ..hopefully i rememebr the steps
but what you essentially have to do is remove the connection to the GPRS network and then itll stop connectinig to GPRS brb with an edit ill have to retrace my steps
*EDIT*
ok i think this is how i did it
tap start --settings -- connections tab -- then tap on connections and then make sure that there are no connections for GPRS i know its a little vague but i really forgot how i did it..
can't say that that helped me to much, sorry. I dont want to eliminate the gprs all together, i just dont want it to connect when im using wifi. Please help!
even with wifi on when it goes to sleep it will be the gprs that kicks in - pain in the butt :shock:
im just looking for a fix for this. Unfortunately my work doesnt have wifi so i cant test some things ive read here to see if it still does it. I have tried going into connections-network adapters- and selecting "the internet". Also, when i go to settings--connections--connections-advanced should i have media net, my isp, or my work selected? not sure if this has anything to do with my problem but i just want to make sure. Also, when i am connected to wifi and my gprs timer is also going, which is it using? I have an unlimited data plan so its not the biggest deal if its running but i just want to make sure im using wifi, not gprs.
RegistryWizard?
Are you using the program called "registry wizard"? I know one of the tweaks/registry edits is called GPRS always on. It might be the cause if one of the registry settings is telling the OS to always have a GPRS connection regardless of whether or not there is a WiFi connection or a program is requesting internet data...
Re: RegistryWizard?
justintime07 said:
Are you using the program called "registry wizard"? I know one of the tweaks/registry edits is called GPRS always on. It might be the cause if one of the registry settings is telling the OS to always have a GPRS connection regardless of whether or not there is a WiFi connection or a program is requesting internet data...
Click to expand...
Click to collapse
nope, I don't have that program...
http://forum.xda-developers.com/viewtopic.php?p=320173#320173
You will select either 'My work network' or 'My ISP' depending on which rom you're using. If MEdia Net is selected, it will use GPRS. To tell whether or not it will use GPRS on any of these settings, you hit the 'edit' button. Don't change anything, but check it out, and it will tell you whether it will connect to GPRS if anything is in there. For me, 'My ISP' has 'auto pick' which means if it finds wifi or wifi is enabled, it will use that first, if not then use GPRS. If you have a stock rom, 'My ISP' may not have anything in it, therefore it will use wifi, or nothing. Remember to associate any wireless router you have to either your 'work' or 'internet' profiles.
awsome, looks like that worked. One question though....am i affected in any way by not having it set to media net? Will my edge and everything still work the same if i leave it on my isp? Thanks for the help
Ty
EDIT: It works better than it did but every so often it trys to connect to edge but it usually doesnt unless im inactive for a bit online. Is this supposed to happen?
I now leave my setting set to ISP instead of MediaNet and at first it is just connected to wifi but then as soon as it is done loading a page gprs tries to connect again so i have to hit cancel like 6 or 7 times to stop gprs from connecting. After that it doesnt try to connect but i wish i could avoid this because its a pain when im just trying to find something real fast. I just downloaded opera today and only tried a few pages on my wifi network and from the couple minutes i used it i dont think it ever tried to connect to the gprs while i was using wifi. i will have to test this a little bit more to confirm but is there any way its IE that could be causing the gprs to try and connect even though it has a full wifi signal?
OK, this 8125 is pissing me off. I want to use Wifi *exclusively* for web access. I don't want this thing to *ever* connect via GPRS, but I have no idea how to set it that way. I've searched but don't find anything along these lines, is there an easy way to do this?
Thanks!
Jason
well i have mine set that way "i think"
also i believe, someone else can chime in, as long as WIFI is turned on via the comm manager, its gonna overrule any other connection type like gprs or edge.
then what i did was go to to settings>connections>connections and make sure the first one selected is My ISP. then under your Wireless Lan connections settings, under the Power Mode tab, set that to best performance.
after that all I ever see up top is the WiFi icon. and if im not in a hotspot, E is there, but if i press explorer it just takes me to the media net page to login, so no data gets used anyway.
Dont know about 8125, but on my T-mobile MDA, I went to
settings->connections->connections.
There I deleted the configuration which had GPRS. Now my device tries to find wifi network or gives up.
Deleting the GPRS settings seems a bit drastic. Is there no way to say have separate "profiles". That way you could have a wifi only mode, and then when absolutlely necessary you could still use GPRS. I would be very interested in a solution like that, bit more flexible I think.
yes, wifi does take the default connection.. it will only try to use edge if there is no wifi connection present.
Or you can use the Registry Wizard and on page 4 select GPRS off...
I'm really racking my brain on this one. I would greatly appreciate any ideas, as I've long run out of them.
---Intro---
I have a one week old Wizard (Cingular 8125 variant). It has one of the latest roms with AKU2 on it. Using Registry Wizard, I selected the option to add wireless G compatibility at some point in time. Wireless initially worked after setting my phone and router up per a tutorial on a popular Axim users forum. A day or two later I went to use WIFI and I get nothing. GPRS/EDGE initially worked also, but at the same time it stopped working. I've spent countless hours since trying everything I possibly can to get WIFI to work.
---The problem---
I am not able to connect to the wireless router. My Wizard sits on "connecting" forever then maybe 5 mins later it says unable to obtain an IP address. When I look at the status, it says 0.0.0.0 for the IP address the whole time it says connecting. Since the problem started, I have yet to actually connect using any settings. The first day I configured the wireless it worked perfectly, with WAP encryption and all.
---Some of what I have tried---
On my US Robotics wireless router I've turned mac filtering and all security settings off, making an open network. I removed the WAP setting for the connection on the Wizard as well. I've tried all the suggestions I can find on any WM 5 and 2003se related forums to no avail. I've tried all the various combinations of limiting to B/G only or mixed, using work/internet settings, and deleting WIFI connections and creating new ones. I don't have a proxy setting in any of my connections. The whole time my battery usage is set to the highest (performance) setting and I'm right next to the wireless router. I've tried turning off all proprietary speed enhancement options. I even installed a program (Pocket DHCP) recommended by Axim PPC users to figure out why I'm not receiving an IP. Since I'm not really a DHCP wiz, I can't tell from the results what is causing this.
I'd be greatful if anyone can help me with figuring this one out. Thanks in advance!
maybe a dumb question, but...the wireless part of the router is working fine? did u tryed with a laptop or pc?
did u tried a hard reset?
That's actually a great question. I did connect fine the first day I configured the wireless and made no changes from then until it stopped working, so I'm just assuming that the router is working properly. Unfortunately I don't have access to any other wireless device/laptop to test it with.
I'm getting ready to do a hard reset right now. I was really wanting to avoid this but I think I have no other option. Hopefully this will fix whatever setting was messed up. I have a slight hunch that the registry change for allowing G access was the cause of the problems.
maybe i missed this in the original post, but have you tried making your device use static ip's on the lan instead of dhcp?
Shogunmark:
I didn't try static IP's for two reasons. 1. Firstly I couldn't figure out how to set this up. 2. I don't want to have to fiddle with removing the static IP when I'm away from home trying to use a different wifi hotspot. I would like it to be seamless and just connect when I turn wifi on near any unsecured network (other than the usual pressing OK to connect).
STATUS UPDATE:
I did a hard reset and directly after this I tried to connect to my open network. Amazingly GPRS/EDGE now works, but WIFI still does not. Then I did a factory reset on my USR router then changed the settings back to how it was just set before. Now, I'm connecting. This doesn't make any sense since the settings are the same now but it's working, maybe theres a glitch with the router that this fixed. This small progress seams like a miracle.
Now that I can connect to WI-FI, I have a new problem. When I try to load pages in internet explorer, it says page not found or whatever the standard error message is. I'm so close I can smell it. There must be some setting that needs to be changed on my Wizard.
SUCCESS
I report that I am now absolutely delighted with network connection on my Wizard. After hard reseting the phone and the router, now I can connect to both WIFI and GPRS. Not only that... but also PIE will choose WIFI if I'm connected to a wireless router, otherwise it will default to GPRS/EDGE without any interaction from me. This stuff is really awesome when it works. It is difficult to setup correctly though.
somehow wifi routers r not 100% reliable, every now and then i need to reset my linksys or i cant get ip as in your case...but with a normal reset is enough in my case...
That's good to know. Maybe I didn't even need to hard reset my Wizard, just the router. Now I know to start with the router because it's much easier to reconfigure. This is the first time that I've implemented WIFI on my own network. What happens if a public WIFI spot won't give you an IP anymore? Surely you just can't go and reset it. Granted it's not nearly as old as Ethernet, WIFI has been out for long enough that you think they would have these major kinks worked out.
Nicnatros said:
... but also PIE will choose WIFI if I'm connected to a wireless router, otherwise it will default to GPRS/EDGE without any interaction from me.
Click to expand...
Click to collapse
How did you manage this? I have been struggling for ages to set things up this way. Can you post your settings from settings>connections>connections>advanced>select networks. Also settings>connections>network cards.
I would like to be able to just turn on wlan from comm manager and use wifi to surf and connect to my wireless lan, but if no wifi available to default to my T-mobile gprs connection for surfing. Currently having to manually change the settings "Programs that automatically connect to the Internet should connect using" My Work Network or Tmobile gprs each time I want to use either.
What I want is the option
if wifi available
use wifi
else use gprs
Well my friends and I were like sitting around drinking foo-foo drinks and I just like stumbled upon the answer. Just kidding, it's fun to play the role of your avatar, especially mine.
Settings, Connections tab, Network Cards, Network Adapters tab: My network card connects to Internet
Settings, Connections tab, Connections, Advanced tab, Select Networks: Set first one to My work network. Set second one to MediaNet (or your gprs/edge/etc connection profile).
Now with those set, edit the My Work Network profile and make sure that under the proxy tab check connects to the internet option, uncheck the proxy option. Now edit your MediaNet (or other carrier data plan) and make sure that this contains all options for your carrier like proxy, modem, etc. If you are a Cingular user, go here to verify all settings for medianet. (Note that you will ignore the beginning couple steps when they say to place medianet first in the "select networks" settings. Start after step 6. Also they used the CingularGPRS connection profile instead of the MediaNet one) http://www.pocketpcaddict.com/forum...ular-8125-windows-mobile-5-phone-edition.html
When you connect to your WIFI router first and it asks you if it's work or internet, always select internet. If you are not sure what it's set at, go out of range or unplug your router. Go into network cards and find your router SID, click and hold on it and select remove. Then when you try to connect to your WIFI again it will prompt you for this, make sure you use internet setting.
Now if you have done everything correctly, Internet Explorer will use WIFI when it's turned on and you get a connection. All other times it will default to GPRS/EDGE. I can go from one to the other back and forth without changing any settings, only enabling and disabling WIFI in the comm manager.
Trashman said:
somehow wifi routers r not 100% reliable, every now and then i need to reset my linksys or i cant get ip as in your case...but with a normal reset is enough in my case...
Click to expand...
Click to collapse
Linksys WRT54Gx? if yes look into dd-wrt . stable and has a lot of features . other hardware is supported as well just check on their webby.
yaboc said:
Linksys WRT54Gx? if yes look into dd-wrt . stable and has a lot of features . other hardware is supported as well just check on their webby.
Click to expand...
Click to collapse
I have read many many many posts about people having issues with the wizard and that exact router... I personally would stay away from linksys.. i work in a field that deal with 3rd party routers and such, anytime an end user has a linksys i can usually prove 90% of the time that its the culprit (80% of the time powercycling it does the trick)
Nicnatros said:
Go into network cards and find your router SID, click and hold on it and select remove. Then when you try to connect to your WIFI again it will prompt you for this, make sure you use internet setting.
Now if you have done everything correctly, Internet Explorer will use WIFI when it's turned on and you get a connection. All other times it will default to GPRS/EDGE. I can go from one to the other back and forth without changing any settings, only enabling and disabling WIFI in the comm manager.
Click to expand...
Click to collapse
This seemed to do the trick for me.
I am sure that I had tried all possible combinations previously but what the hell, it is working exactly how I want now.
Thank you
I don't know what is going on but when I'm at home, I woud usually be connected to UMTS/GPRS. Of course, having wifi at home, I would rather use that (speedwise) but when I turn on wifi, I notice that I would be connected to both WIFI and UMTS/GPRS.
FIRST QUESTION:
Which am I utilizing? UMTS/GPRS or WIFI?
Now, considering that I "THINK" I'm using wifi, I would launch PIE and to go to a website, it takes forever...... The task bar keeps saying locating. I have to literally wait and wait before I get to the website.
SECOND QUESTION:
What is going on here?
At any rate, if I turn WIFI off and I'm just connected to GPRS/UMTS, I can browse using PIE without any problems. No "locating..." etc. or waiting.
Please help!
nutnbolt said:
I don't know what is going on but when I'm at home, I woud usually be connected to UMTS/GPRS. Of course, having wifi at home, I would rather use that (speedwise) but when I turn on wifi, I notice that I would be connected to both WIFI and UMTS/GPRS.
FIRST QUESTION:
Which am I utilizing? UMTS/GPRS or WIFI?
Now, considering that I "THINK" I'm using wifi, I would launch PIE and to go to a website, it takes forever...... The task bar keeps saying locating. I have to literally wait and wait before I get to the website.
SECOND QUESTION:
What is going on here?
At any rate, if I turn WIFI off and I'm just connected to GPRS/UMTS, I can browse using PIE without any problems. No "locating..." etc. or waiting.
Please help!
Click to expand...
Click to collapse
While on wifi you can temporarily turn off GPRS using connections hard key below on/off hard key. Just tap on the icon that looks like a pda with two arrows. When off wifi reconnect GPRS using connections in settings menu.
Mike.
Ok. goodie. I was able to shut off the GPRS.
Now I launched internet explorer. The only connection that I'm connected to is my wifi. Still the taskbar is saying "Locating.." taking forever to go anywhere.
nutnbolt said:
Ok. goodie. I was able to shut off the GPRS.
Now I launched internet explorer. The only connection that I'm connected to is my wifi. Still the taskbar is saying "Locating.." taking forever to go anywhere.
Click to expand...
Click to collapse
At least one step in right direction. I'm not so hot on the slow connection. Assume ports and proxies are setup ok.
Perhaps others have some ideas.
Mike
elaborate on the proxy settings so i can check if these are right...
nutnbolt said:
elaborate on the proxy settings so i can check if these are right...
Click to expand...
Click to collapse
In Start>Settings>connections there is an option "edit my proxy server" and within this lots of options.
I will have a different provider from you so don't know what settings should be there. I am also not an expert on this so hopefully someone who is will jump in with some info on this.
One person I was posting with queried why their wifi connection needed any proxy settings as they were not connecting through to their mobile operator but to their home broadband connection. However when they tweaked a setting here their Wifi suddenly started working. See Mariete's last post here:
http://forum.xda-developers.com/showthread.php?t=284867
We need someone with more knowledge!! Anyone?
Mike
Well for one thing, there is no setting for proxy server. Even then when i did find anything to do with proxy server, it is not even activated.
Next..
Phew...Someone else with the same EXACT issue. I was on with Cingular/HTC support today and they really didn't help. I will keep trying new things and checking back to this thread to see if anyone else thinks of an idea.
I have a Apple Airport (802.11g) with no security settings. I have a few laptops on the network and friends who can connect their laptops without any issues.
I actually got tired of this issue. I downloaded and bought netfront. It was something I was going to buy anyway. So after installing it, I tried it again and this time, it goes to the website flawlessly. It must be something to do with IE.
On the other hand, I'm having some issues with shutting down the GPRS again. It keeps turning on automatically.
brmcguire said:
Phew...Someone else with the same EXACT issue. I was on with Cingular/HTC support today and they really didn't help. I will keep trying new things and checking back to this thread to see if anyone else thinks of an idea.
I have a Apple Airport (802.11g) with no security settings. I have a few laptops on the network and friends who can connect their laptops without any issues.
Click to expand...
Click to collapse
everyone make sure they arent on their providers connection that utilizes the proxy.. i dont know about any provider except cingular.. when using wifi stay off MEDIA NET.. everyone's best bet is to make sure they are on the connection for MY ISP, go to settings, connections, connections, advanced, select networks, change the drop down to MY ISP. also make sure wifi is off before doing this, after changing to my isp then turn wifi back on and you should be ok...
shogunmark said:
everyone make sure they arent on their providers connection that utilizes the proxy.. i dont know about any provider except cingular.. when using wifi stay off MEDIA NET.. everyone's best bet is to make sure they are on the connection for MY ISP, go to settings, connections, connections, advanced, select networks, change the drop down to MY ISP. also make sure wifi is off before doing this, after changing to my isp then turn wifi back on and you should be ok...
Click to expand...
Click to collapse
I will give this a try. Thanks. I will keep everyone posted to my hopeful success.
Absolutely fantastic!!!
Hi All,
First of all, let me tell you that I was also suffering from the same problem of MediaNet proxy settings. I've done the same changes asked by "shogunmark" which really sounds good logicaly. And my wifi connection started working miraculously! Yes, it is miracle for me as I am trying to connect to WiFi for last 3 days! Thanks a lot again...
I got it to work as well. However, I couldn't use "My ISP" connection as it was pointing to a Cingular domain. I ended up creating a new one called Home and it works fine. I do have a question. Under Settings/Connections/Connections/Advanced/Select Networks...
What does everyone have selected in both drop downs? I had to select my new Home connection for both to get WIFI to work.
that cingular domain/AP is only used for edge/3G data with no proxy.. this is why this is used for wifi.. theoretically MEdia net would work if it didnt have the proxy... but the phone doesnt look at the AP name when on wifi, only the proxy, you shouldnt have needed to create a new connection!
shogunmark said:
that cingular domain/AP is only used for edge/3G data with no proxy.. this is why this is used for wifi.. theoretically MEdia net would work if it didnt have the proxy... but the phone doesnt look at the AP name when on wifi, only the proxy, you shouldnt have needed to create a new connection!
Click to expand...
Click to collapse
ok, so I should be able to keep Media Net on the top drop down and My ISP on the second drop down? I assume I should just be able to use the Comm Manager to switch between WIFI and the Cingular Data Connections?