On my old Loox, ActiveSyncing got me always the latest content on AvantGo. With the 9100, Active Sync 's AvantGo option is 'on', but contnet is never renewed.
Is there a straightforward way to get this fixed?
Related
Using 4.1, got Qtek Rom on a Vario. Been syncing fine for weeks, now...just says connecting. It must be my Vario as my E200 connects no probs and syncs up properly. Tried going back to 3.8 (yeah I know) 4.0 and re-installing 4.1 but it won't connect...any idead argh !?
Hi there,
What message do you get? Getting settings I suppose?
Disable the firewall and try again ( this helped me, while upgrading a Wizard of a friend!)
Good luck!
Activesync Problems
I had this problem too - was syncing just fine for weeks then all of a sudden nothing. Managed to narrow it down (unfortunately had to delete the as profile each time and start anew) and I can safely say that in my case at least it was due to the "Synchronised Files" feature. I decided not to use synchronised files (i.e. I unchecked "Files" under "Options") and now I have it syncing everything else perfectly - on two separate PCs with absolutely no more issues.
Hope this helps mate.
Forgot to mention I have an o2 mini s. (Not the XDAII as indicated <--)
monkeyphonix said:
Using 4.1, got Qtek Rom on a Vario. Been syncing fine for weeks, now...just says connecting. It must be my Vario as my E200 connects no probs and syncs up properly. Tried going back to 3.8 (yeah I know) 4.0 and re-installing 4.1 but it won't connect...any idead argh !?
Click to expand...
Click to collapse
Did you install any firewall software? Do you have active firewall when running AS? Did you regedit your Wizard's registry in branches of AS?
Well at least you get some connection.
When I connect my KJAM I get the normal 'ding dong' and then NOTHING.
If I connect my old PDA2K to the same port it works fine!!!!!!!
Robin
Thanks for the help. I disabled my firewall (Kerio), reset the PC, did the other network hacks to try and get activesync to work. But it wouldn't.
But like I said my E200 (Voyager) sync'd no probs. Somehow as mentioned I think the registry got upset by some fiddling and a hard reset was the the cure then many hours getting it back to settings again, re-installing aps on mem card so I could see them on the phone as icons etc etc.
My device is a Vario with a Qtek Rom (tried K-Jam like the less stuff on the Qtek) with the extended Rom unlocked.
Re: Activesync Problems
stegz said:
I had this problem too - was syncing just fine for weeks then all of a sudden nothing. Managed to narrow it down (unfortunately had to delete the as profile each time and start anew) and I can safely say that in my case at least it was due to the "Synchronised Files" feature. I decided not to use synchronised files (i.e. I unchecked "Files" under "Options") and now I have it syncing everything else perfectly - on two separate PCs with absolutely no more issues.
Hope this helps mate.
Click to expand...
Click to collapse
Didn't think to try this. I actually had this prob on my Magician (MDA compact) before I sold it. Should have remembered. Cheers.
Hello,
In fact activesync seems to be te culprit of most my 9100 problems and slowdowns.
I am currently using Activesync 4.1.4841 and when synchronizing with my Wizard everything seems to be working correctly for a first sync. Then I disconnect it from USB, wait a few seconds and try to sync again and it takes forever...slowing down the Pocket PC drastically (until soft-reset)...until returning a timeout message:
"Synchronization cannot be completed sucessfully. Reconnect your device and try again. If the problem persists, see the Microsoft ActiveSync Troubleshooter in Microsoft ActiveSync Help on your desktop computer."
Any ideia how this might be solved?
Cheers,
Francisco Teixeira
Somebody please help me!! I today got my new MDA Compact II. Have started it up and loaded active sync.
Whenever I connect it to the computer ActiveSync only gets as far as "Retrieving Settings"
No other Syncing takes place, however I can see the device in "My Computer" on my laptop.
I cant be doing anything wrong, its not as if i'm a newbie and have never used Active Sync before.
Anyone else encountered this problem?
I'm getting really frustrated, can anyone shed some light on this before it gets launched out the window?
You can try a few thing
(1) Remove the partnership of your device. E.g. File -> Delete Mobile device. It reconnect your phone it should ask you to set up a new partnership
(2) Remove the partnership, uninstall your active sync, reboot your system and reinstall your active sync
btw, the mobile device on your My Computer is there after you installed the activesync, doesn't mean much.
I expect it is the same problem as i see 50-60 times a day at work
Firewalls!
Sygate corporate firewall will not work until you do the MTU size hack.
On other firewalls, (McAfee, Sygate personal, etc) they dont always shut down when you disable them, they actually just hiode from you.
Check the MS site and make sure you have DEFINITELY added all the processes and ports to your firewall.
on the off chance it is not a firewall,
As it is now a TCP/IP connection with WM5, just cos your wm2003 device works, doesn't mean you've done everything right.
Try turning off any pop up blockers etc and check you only have the standard three protocols (at most, you should get away with only TCP/IP) enabled on the network connection that activesync creates. any other strange protocols can cause problems in communication.
What version of ActiveSync are you using? You tested the 4.2 Preview?
Hi,
I have a really weird issue. I'm really flabbergasted about this one, I think this is a tricky one.
But maybe some can help me out.
I've got a Qtek 9100 with the latest official firmware (2.18.7.6 NLD) so a dutch version.
I use a company SIM card wich has GPRS disabled so I have to use WIFI for internet.
Everything goes well (both browsing as well as email).
But then when I sync my agenda/contacts (none of the other items) with active sync (I tried 4.1 and 4.2) then email doesn't work anymore but WIFI is fine: I still have an IP and I can browse.
The error I get is that the device cannot set up a connection and wants me te set up a modem connection profile (wich I don't have since I only am allowed to use wifi).
Again this error is reported by the emailclient (tmail.exe) but IE works fine!
So somehow after a sync-action with active sync the email client wants to use a GPRS/CSD connection to read mail. I never told it to do so!
I tried the following to solve this issue but with no result:
- I used Memmaid and Check Notifications to find any problems but that was ok.
- I deleted all profiles in active sync (both on the PC as well as on the Qtek).
- I disabled the phone functionality (I hope the phone would understand not to use GPRS/CSD)/
- I tried a soft-reset
The only way to solve this is by a hard reset, but then I have to sync again and I'm back at the beginning of my problem.
Can anyone help me please! I'm desperate.
THanks in advance
I'm upgrading from the T-Mobile Vario (Wizard) to the Vario 2 (Hermes). What's the best way to get all my data across (contacts, bookmarks, files, calendar items etc.)? Is it as simple as syncing the old one, then the new one? Thanks.
Sync the wizard with Outlook on your desktop...then sync your Hermes with Outlook....
Thanks. My next question would be, since my original laptop died, outlook on the second laptop doesn't have any of my contacts, calendar items etc. In fact, I've never synced my wizard with this laptop. Is there anything I should do (i.e. settings, installations) besides installing activesync before I sync the wizard and then the Hermes? Want to make sure I don't somehow end up wiping everything off the wizard, as I don't have the info that's on it anywhere else.
active sync won't erase it, it will see all your info on the wizard and copy it to your computer, just like it will see there is nothing on my hermes and stuff on your laptop, hence copying it to your hermes.
Thanks again!
Can't seem to get them wizard to sync... I installed activesync, connected the wizard, both the device and the pc say connecting, after a short while the device stops trying, and activesync looks like it's still trying, and nothing happens. I went to zonealarm and added the three files mentioned in the help menu. Is there anything else I need to do before I can connect and set up a partnership?
Turns out the problem was zonealarm after all. I disabled it and the sync worked fine, laptop got updated, then the Hermes. Not sure why zonealarm was still causing this issue since I added the three files as instructed in the online help...
Hey fellas, i´m facing some trouble to sync my trinity.
last sunday i´ve formated my notebook (after two years of use, it was a bit "heavy") and everything went well.
However, only yeasterday i had time to install microsoft outlook and activesync but when i tried to sync my P3600 some kind of error ocurred and both the devices (notebook and ppc) says "Attention Required".
I did reinstall the active sync, but the issue is still there.
I really don´t know what to do. Can someone help me out?
Thanks
Antonio
try below
Start>Settings>connections>usb to PC
Dsiable advanced network functionality
don't know how or why, but 15 min ago i was trying to sync it with my office's computer and it worked.
now i came home to have my lunch, and it's working now...
I had this occur yesterday on my office and home PC. The PPC would connect via active sync, and files can be browes etc, but it will not sync with outlook. It just stays on 'looking for changes'
The only change I made was installing a trial of Spb Wallet - the PPC sync'd before the install but not afterwards.
I have uninstalled the trial, but the PPC still wont sync