The thing is that when i receive a call and the nicestart prog is enable it just rings but i cant see who is calling because of the password login...
Is there a way to solve this problem?
Thanks in advance
I've never used NiceStart but I guess that this piece of software is putting your unit into some sort of sleep mode and the only way to wake it up is by typing in the password.
Try disabling it first and see if PhotoContacts works probperly. I've been using PhotoContacts Pro now for about a year without any problems.
Related
Hi,
So I have a major problem with my Exec and wanted some advice before doing a full reset. When I get an incoming call I hear it ring once at most and then it seems to hang and push the call through to voicemail. Is this a known bug ?
Also when the phone was working I could never answer a call when the phone was closed - when I open it and click on answer 100% of the time the caller had be pushed through to voicemail.
Thoughts?
Nige
@monkeyleader,
which mode are you using? I use Corporate mode and I have not had any problems (did have problems with the phone on my JJ however).
Also, make sure you don't kill the "phone" process with the o2 task manager in the non-Corporate modes.
Its in corporate mode as far as I know - this was working, and indeed it does ring, Im just unable to answer the dam thing
Nige
@monkey
I assume you've tried the SIM in another phone to check that there are no problems with the SIM
@jah
either in Corporate, basic, personal, if u kill the phone.exe proces it will do those problems, but his problem si probably the SIM card
HowlingWolf
Kosova
@fakbrenjeri
as far as I know the O2 Task Manager is not available in Corporate mode.
Problem with the SIM ?? Surley not and just to confirm I put the sim in another phone and it worked perfrect.
So for example Im sitting with the phone in the closed position. It rings .. I open the phone and swivel the sceren into portrait mode ... I try to hit answer and it doesnt seem to respond ....
monkeyleader said:
Problem with the SIM ?? Surley not and just to confirm I put the sim in another phone and it worked perfrect.
So for example Im sitting with the phone in the closed position. It rings .. I open the phone and swivel the sceren into portrait mode ... I try to hit answer and it doesnt seem to respond ....
Click to expand...
Click to collapse
I have exactly the same problem , getting a bit frustrating and costly as I am currently missing loads of calls and having to ring the people straight back ! so in effect I am paying for my incoming calls !
Going to throw it back at o2 tomorrow
whenever i click the recieve calls on my universal, i'll click the answer button.. and realize that it takes a lil longer for it to actually connect the call..
anyone here have the same problem here? any solutions??
tend to find it depends on:
1. THe phone skin you are using
2. Ring tone specific to each user
3. Caller id picture displays
4. Large ring tones
5. Other apps running simultaneously
6. How long since your last rom update
I think you will find that everydody experiences a 1 second to 2 second maximum delay
I am havin d same prob
Disable the skin on the dailer, and use a windows default ringtone. And a lot of free memory is always a plus
how to disable the dialer skin?
I believe it can be done here:
HKEY_LOCAL_MACHINE/Security/Phone/Skin
Then look for the DWORD "enabled" set it to 0
I am not sure about this though!!! You have to check google (like I did, and found this: http://www.buzzdev.net/index.php?option=com_simpleboard&Itemid=59&func=view&id=5075&catid=36
I have the same when I get a call, but I can live with that. My problem lately has been that when I get an incoming call my entire device freezes. I can press whichever button I like, but nothing works except a soft reset and then I would have missed the call. Has anyone else had this too? I hope it doesn't happen too often or else I send it off for repair (I pay insurance for a reason).
ng said:
I have the same when I get a call, but I can live with that. My problem lately has been that when I get an incoming call my entire device freezes. I can press whichever button I like, but nothing works except a soft reset and then I would have missed the call. Has anyone else had this too? I hope it doesn't happen too often or else I send it off for repair (I pay insurance for a reason).
Click to expand...
Click to collapse
jup, mine sometimes starts vibrating and just doesn't stop.
Soft reset is the only way to get my phone working again
ng said:
I have the same when I get a call, but I can live with that. My problem lately has been that when I get an incoming call my entire device freezes. I can press whichever button I like, but nothing works except a soft reset and then I would have missed the call. Has anyone else had this too? I hope it doesn't happen too often or else I send it off for repair (I pay insurance for a reason).
Click to expand...
Click to collapse
I have the same problem. When the MDA is open, everything works fine. But when the lid is closed, the mda freezes after an incoming call and softreset is the only solution. Any ideas about that?
I am looking for a tweak or registry fix/setting to help me with the following problem:
On my parrot bluetooth car kit in headset mode after a call is finished the phone stays on. This is not a problem if you finish a normal call without handsfree because you switch it off manually but when you are driving with the phone in your pocket, the phone is liable to screen presses. I have been inadvertently creating/editing contacts and making notes with the phone in my pocket after use in the car.
The screen autopower off does work if the screen is not activated for a few minutes but the inadvertent screen presses occur within this timeframe.
Any help is appreciated - thanks!
I have a similar problem when using my bluetooth headset (Samsung WEP200)…
When I make a call using the headset the screen stays active, and if I turn it off during a call it turns it self on again after the call has ended. Not fun if it’s in my pocket and it decides to call someone back without me knowing.
Is there a general setting or fix that disables the screen when you answer or make a call with the headset active?
Have you found any solution to this?
aneben said:
Have you found any solution to this?
Click to expand...
Click to collapse
Nope, not yet…
I can’t believe that there aren’t a lot more people with this problem!? It’s a REALLY STUPID problem to have on such an advanced phone like the Blacksone when nearly EVERY basic mobile phone has this feature since the dawn of BT headsets.
This might leave me no other choice than to retire my beloved Blackstone and dig up my old Samsung phone so that I can drive my car safely with my phone in my pocket…
There is an app called Touch InCall Screen Tweak. With that you can configure so that screen will go off quickly when answering and ending calls and bluetooth headset is used. It works great for me!
aneben said:
There is an app called Touch InCall Screen Tweak. With that you can configure so that screen will go off quickly when answering and ending calls and bluetooth headset is used. It works great for me!
Click to expand...
Click to collapse
I actually tried that app yesterday but didn’t get it working as I wanted. How did you configure it?
I guess I can try it again – would be great if it works!
Well, now I can make a call without worrying about it to end (with the InCall Touch app), but when the call is ended we're back making random calls without knowing to whom.
This amazes me, how this feature can be missing. It’s not something I admit to my iPhone friends who still tries to find something that Blackstone can’t do – cuz this even works on the iPhone!
I'll try tweaking till I or someone else can find a solution to this rather embarrassing problem.
So I'm using the Touch HD and it is working flawlessly so far but the one thing that bothers me is incoming calls. Sometimes the phone will just vibrate and not ring, other times it will be a delay before the ringer comes in and announces who's calling. OR it might just display the number and no name with it.
Currently I have gyrator2 running, with MS Voice Command and the Sim Contacts Hider. I have a custom ringtone cut, thats .mp3 format. Is any of these the problem? I disabled gyrator2 to only work if my stylist is out to see if that will help but it gets annoying to not be able to receive calls flawlessly without any problems. I was leaning that it might be MS Voice Command...
Any suggestions?
I had a similar problem on my Palm 750 and sorted it by disabling voice dialling from one of the Settings options. You might start there.
Hello there,
has anyone an idea how to realize this:
blackstone is in standby - bluetooth is activated - bluetooth headset is on - both connected - call comes in - I take the call with the bt-headset - talk - I end the call with the bt-headset - blackstone remains on until the adjusted time for standby is reached
but I would like the blackstone switch into standby mode immediately after ending the call
is this possible ?
greetz
smuggs
This needs addressed - sleep after a call during headset mode
In headset mode the phone does not go into sleep mode or power off automatically after a call. This is a major issue for those of us who leave the phone in the pocket in the car or when using bluetooth headsets. I have finished calls recently and then 5 or 10 mins later my phone would connect to someone random in the phonebook whilst driving which is quite embarrassing "I didnt call you" - "yes you did"!!
In the meantime I am using constant device lock but this is a clumsy solution for what surely MUST be a common problem. Can anyone else not help us out and try to get the device to sleep after a call during headset mode? I would be so grateful for a useful solution that doesnt involve a constant device lock that I dont really need!
Cheers
I'm having the same problem also....
The list grows - surely there must be others out there with the same problem. We should try and get out heads together to crack this one!
the_flyer said:
The list grows - surely there must be others out there with the same problem. We should try and get out heads together to crack this one!
Click to expand...
Click to collapse
ooch aye the noo ...
obviously NOT ... which makes me wonder ... as for me this is a main issue
pimpin' seems to be more important than functionality ... huh?
i guess i will write to htc and see what they r saying
will post answers here
greetz
smuggs
Sounds good man, keep up posted. Its a major issue for me too!
ok folks .. here is the very annoying answer i got from htc support
You recently wrote us about an issue that you have encountered with your HTC Touch HD. There is only one way to instantly set the device into standby mode: please press quickly the power on/off.
what shall i say ... THAT'S CRAP !!!
and i'm still thinking that there must be a workaround ... redefining the buttons or something like that ... any ideas from the specialists in here ?
c'mon guys - help us out here
greetz
smuggs
that's really strange...just tested it.
connection htc/jabra bluetooth.
htc device lock ON.
an incoming call arrives, pick up the call via bt-headset. end the call via bt-headset. phone is immediately locked again (htc own device lock), display is on. after 1 minute also the display turns off.
or do you mean something completely different?
Same here and it feels retarted.
Ooe of the major purposes of a bluetooth headset is to avoid contact with the device. So having to take out the phone or handle it (in a car/office whatever) after a BT call is rediculous.
BT headset drops call
I am not sure if I should pose my questions here but my Jabra BT headset is connected to my Blackstone on standby mode via BT. However, when an incoming call comes, the BT headset does not get the call but is transfered to the HTC handset instead. I have no problems making outgoing calls on the Jabra headset. It's frustrating when I am driving... could anyone tell me how to remedy this?
Thanks in advance.
end call via BT into standby works with LockMeLite
hello there,
with LockMeLite http://forum.xda-developers.com/showthread.php?t=478606 and my samsung wep250 bt-headset
it works
this headset is non-a2dp-capable
dunno if an a2dp capable headset will work, but will test is (next week)
greetz
smuggs
I have tried flashing newer fancy roms and tried various lockers but no applications are intuitive enough to fix this simple fault. When making a call in 'headset mode' the fast sleep mode prevents accidental presses during a call. Unfortunately when the call is ended via handsfree/car kit/recipient, the phone wakes back up to life.
Any locker I have used is active indiscriminantly when pressing the power on button to wake the device from sleep. I have tried lockmelite, hd tweak for inbuilt MS lock, pocketshield and another locker however none have the function to only lock the device whilst in headset mode and after a call has ended. This is a request to developers, expert cooks and modifiers please can anyone help us out?
Thanks a million
Check this, it can do the trick...
h..p://www.pocketshield.net/default.htm
S2u2 V2.04 workes fineas you needs, even look during a call (gives black screen)
I'll do a try
As I have the same request/problem I'll try the following with the help of AGEProfile.
- I create a profile actived when the headphone is connected, when this profile is activated it launches a program named MySuspend so my phone is suspended.
- I create another profile activated when the headphone is connected and there is a call in progress, this profile does nothing but it exists (only)
So when my phone goes connected with the headset (BT) it goes suspended.
When I receive a call it wakeup as normal and the profile is switched to the second one (but does nothing)
When the call finishes, the first profile is activated again and the phone goes suspended.
That's all (and it should work, I just made the setup for that).
Regards,
P.S. sorry for my english because it's not my language.
I also have this same question. After ending the call the screen stays unlocked and will inadvertently call a number sometimes.
I tried
Yes I made a try yesterday evening in real conditions and it work very well
So I'm very happy
I forgot to mention that I also use the Inesoft to have the screen locked when one call come in.
Hope this will be useful for you too
Regards,