I can connect to the server ok, i can see my contacts online, away, busy, etc , yet when i try talk to them the send button is greyed out. pressing enter has no effect.
Whats the point in only being able to "see" my contacts.
Anyone had this, got a solution?
I wont be putting on Agile just yet, would like the testing to be completed and fixes applied before that.
This is due to the way Messenger now works.
Once you have signed in the application shows status of the contact.
On selection of a contact the application then tries to connect to the contact. (The send button is inactive until it is connected to that user)
So my guess is you have a connection problem...
Related
I have just started using Mobile GMaps. Every time the program needs to download a new tile, I get the following message:
" "Mobile GMaps" wishes to access the network, which might use call time. This MIDlet suite is not from a trusted source. Allow this time? "
I always press yes, but the message constantly pops up. Is there a way to turn it off permanently?
Does no one know the answer to this? I get the same problem with other midlets, although the message doesn't appear as frequently.
I have the same issue with Opera mini, and if I press No by accident I have to uninstall it and reinstall it again.
Not that in anyway helps you, but a problem shared and all that...
Haven't had this problem, but instead of re-installing opera every time, go into midlet manager and instead of clicking on the midlet, press down on the midlet and hold for 2 or 3 seconds. a menu will come up and select security. make sure all security functions having to do with net access or local access security are set to session.
might fix the gmaps thing too.
So i have WM6 on my MDA and it worlds perfectly fine, my only problem is that if im on a call and i need to press number to go through a menu, it dosnt work. The number popup as if im pressing them, but i cant go through the menus, it dosnt work on any phone calls; not even my voicemail. I just want to be able to fix it so that when i press numbers during a call it actually sends the numbers.
Simple solution: go back to a shipped version!
The WM6 ROMs are all 'selfmade', so, you might experience some minor or major bugs ...
[email protected] said:
So i have WM6 on my MDA and it worlds perfectly fine, my only problem is that if im on a call and i need to press number to go through a menu, it dosnt work. The number popup as if im pressing them, but i cant go through the menus, it dosnt work on any phone calls; not even my voicemail. I just want to be able to fix it so that when i press numbers during a call it actually sends the numbers.
Click to expand...
Click to collapse
Are you installing the T-Mobile .cabs to your phone, like the network custimzations, mms, etc. if so, that may be your issue as it was mine before, so I had started manually inserting the internet server settings, and things like that, instead of installing the .cabs, and that solved my issue...
I posted details on another thread, I will find it and post link here for you.
***EDIT***
http://forum.xda-developers.com/showthread.php?p=1147465#post1147465
Sorry but I searched and cannot find answers-
A few questions:
I have tmobile in the usa (oregon) with a black sony x1i
1) Issue- I am coming from a Sam BJ2- I use exch server for email, contacts, etc. When I set up my X1 with my exchange info- everything worked nicely-
But some of my contacts that are smsing me do not show their contact name only the #. I think it might be cause some have the 1 (XXX) and some dont have the 1. How can I fix this as I have 600 contacts?? Please help
I noticed that the phone wont dial a # without the 1 in front of it-
2) on my BJ2 - when I wanted to call, email or text someone- I would start typing their name and I would choose from the list as I am typing. I cant do that with the xperia- typing doesnt do anything- How do people quickly search for a contact???
3) Is there a seperate box that shows on the home screen when SMS's come in as opposed to 1 message box with a red #? I would like to see if its an email or sms.
Thx in advance
In regards to 1, have you tried selecting "United States" in the regional settings?
Yes I set it to USA english-
Also where is the battery indicator on the home screen??
Thx
1) thats a calling ID setting... there is nothing you can do about it except you go change the contact number and add or remove the 1 before the area code... the phone is just trying to match whatever the caller ID is to your contact list... if it is not the same it wont display it.... I have had that problem on my BJ2 too and I had to change all those contacts as well
2) I can do so by sliding out the keyboard and start typing the name and call... not sure if you are doing the samething or you are trying to get the soft keyboard out to type...
3) I have a sms or email notification showing up on the bottom of the screen whenever I receive them.... otherwise the sonyericsson panel have a option to display them I think
Is there a way, other than adding *31# infront of the stored number, to enable caller ID per contact in my 'people' tab?
My number is blocked by default (and I'd like to keep it that way for a variety of reasons) but would like to enable the ID when calling my wife and select other people. The workaround so far has been to add the code above infront of the number but then it seems SMS messages are not going thru which is less than ideal (I could add a separate number entry for messages I guess, but still).
Having looked at the Phone settings it seems I'm able to select "Contacts only" which in my mind (as a dev) means someone has already written a app (or simply extended the current Contact app) to allow for this on a per-contact basis.
Any ideas?
You can try this MagiCall
http://www.mobiion.com/
I was also looking for this.
The MagiCall features don't mention the option to set caller id per contact.
@emigrating: Did you fix it another way?
Anyone else knows a good solution?
+1 same interrest same issue.
But as time goes on you can use the following workaround: or let's say this is the way I manage it......
If you use the traditional SMS Mode and hit reply sms goes through.
This doesn't work as mentioned in Konversation Mode.
It's uncomfortable because the konversation mode is the better client...but the only way you can send sms to someone stored as *31# contact.
It seems as if the konversation mode always refers to the number stored in your contact, whereas the traditional mode refers to the number which comes with the sms.
I hope someone can fix this, or has a better workaround, I'll be interested to!!!
SWINXNL said:
I was also looking for this.
The MagiCall features don't mention the option to set caller id per contact.
@emigrating: Did you fix it another way?
Anyone else knows a good solution?
Click to expand...
Click to collapse
use MagiCall. Set up a rule: for your wife's phone #, prepend *31#, then dial.
I use it for long distance calls. For all phone # not in my home area code, prepend 1511 (chaper long distance call provider), then dial. A small problem with this: need to disable this rule when roaming in another country.
Give it a try, it is good.
I've downloaded the trial version and set up a rule for Outlook categories, just to test. Change the dialed number to #31#{phone}. When I call someone in the particular category, the MagiCall icon appears in the topbar and my device freezes....
No big problem, I restarted my device to try again.
The same thing happens. Again I take out the battery and restart the phone.
At that point the device became terrible slow somehow.
With a little patience I succeeded uninstalling the app.
Restarting again.
Fortunately, my phome is normal speed again.
Sorry, I'm not a big fan of MagiCall at this moment...
----
Edit: Just trying again, because I can't find a real alternative.
The problem seems to occur when I choose Outlook Category as filter.
Just bad luck for me by choosing that option for my first try.
The program seems to respond on other conditions.
It could be my phone only, otherwise maybe I will contact Mobiion about this..
Edit2: The problem was known and was fixed in a newer version.
So it seems to work after all
Something is up with my contacts. If I search for some people I'll get the result and see their number under their name. When I tap the name the contact opens but no phone number is listed, just all the other contact items.
For the contacts this happens to I can only call them from the diaper contacts list with the green phone icon. Even then it's random as to what number it calls if they have more than one.
Anyone else seen this behavior and/or know of a fix?
Apparently, you're not the only one with the problem. I guess it's the new blur thing. For example, my girlfriend's info, I can see everything but her phone #'s under "Contacts", without the green call icon. As far as it being random to what # it calls... I haven't had that problem... I do understand your frustration with it though but nothing's major with your phone, it's just a stupid perk moto made.
Thanks for the feedback. At least I'm not going to do a factory reset now to try and fix it. I'll just hold tight for an update and or a cool rom.
I've noticed that it happens on contacts that have facebook accounts attached. Deleting your facebook account from "my accounts" might fix it, I haven't tried. If you go to the contacts list under the phone program it will allow you to access the numbers.